Moving libraries out from inside targets and creating bootloaders directory.

11 files changed, 0 insertions, 1105 deletions

diff --git a/core/libraries/Wire/Wire.cpp b/core/libraries/Wire/Wire.cpp
deleted file mode 100755
index 73369b3..0000000
--- a/core/libraries/Wire/Wire.cpp
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
-  TwoWire.cpp - TWI/I2C library for Wiring & Arduino
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-extern "C" {
-  #include <stdlib.h>
-  #include <string.h>
-  #include <inttypes.h>
-  #include "twi.h"
-}
-
-#include "Wire.h"
-
-// Initialize Class Variables //////////////////////////////////////////////////
-
-uint8_t* TwoWire::rxBuffer = 0;
-uint8_t TwoWire::rxBufferIndex = 0;
-uint8_t TwoWire::rxBufferLength = 0;
-
-uint8_t TwoWire::txAddress = 0;
-uint8_t* TwoWire::txBuffer = 0;
-uint8_t TwoWire::txBufferIndex = 0;
-uint8_t TwoWire::txBufferLength = 0;
-
-uint8_t TwoWire::transmitting = 0;
-void (*TwoWire::user_onRequest)(void);
-void (*TwoWire::user_onReceive)(int);
-
-// Constructors ////////////////////////////////////////////////////////////////
-
-TwoWire::TwoWire()
-{
-}
-
-// Public Methods //////////////////////////////////////////////////////////////
-
-void TwoWire::begin(void)
-{
-  // init buffer for reads
-  rxBuffer = (uint8_t*) calloc(BUFFER_LENGTH, sizeof(uint8_t));
-  rxBufferIndex = 0;
-  rxBufferLength = 0;
-
-  // init buffer for writes
-  txBuffer = (uint8_t*) calloc(BUFFER_LENGTH, sizeof(uint8_t));
-  txBufferIndex = 0;
-  txBufferLength = 0;
-
-  twi_init();
-}
-
-void TwoWire::begin(uint8_t address)
-{
-  twi_setAddress(address);
-  twi_attachSlaveTxEvent(onRequestService);
-  twi_attachSlaveRxEvent(onReceiveService);
-  begin();
-}
-
-void TwoWire::begin(int address)
-{
-  begin((uint8_t)address);
-}
-
-void TwoWire::requestFrom(uint8_t address, uint8_t quantity)
-{
-  // clamp to buffer length
-  if(quantity > BUFFER_LENGTH){
-    quantity = BUFFER_LENGTH;
-  }
-  // perform blocking read into buffer
-  twi_readFrom(address, rxBuffer, quantity);
-  // set rx buffer iterator vars
-  rxBufferIndex = 0;
-  rxBufferLength = quantity;
-}
-
-void TwoWire::requestFrom(int address, int quantity)
-{
-  requestFrom((uint8_t)address, (uint8_t)quantity);
-}
-
-void TwoWire::beginTransmission(uint8_t address)
-{
-  // indicate that we are transmitting
-  transmitting = 1;
-  // set address of targeted slave
-  txAddress = address;
-  // reset tx buffer iterator vars
-  txBufferIndex = 0;
-  txBufferLength = 0;
-}
-
-void TwoWire::beginTransmission(int address)
-{
-  beginTransmission((uint8_t)address);
-}
-
-void TwoWire::endTransmission(void)
-{
-  // transmit buffer (blocking)
-  twi_writeTo(txAddress, txBuffer, txBufferLength, 1);
-  // reset tx buffer iterator vars
-  txBufferIndex = 0;
-  txBufferLength = 0;
-  // indicate that we are done transmitting
-  transmitting = 0;
-}
-
-// must be called in:
-// slave tx event callback
-// or after beginTransmission(address)
-void TwoWire::send(uint8_t data)
-{
-  if(transmitting){
-  // in master transmitter mode
-    // don't bother if buffer is full
-    if(txBufferLength >= BUFFER_LENGTH){
-      return;
-    }
-    // put byte in tx buffer
-    txBuffer[txBufferIndex] = data;
-    ++txBufferIndex;
-    // update amount in buffer   
-    txBufferLength = txBufferIndex;
-  }else{
-  // in slave send mode
-    // reply to master
-    twi_transmit(&data, 1);
-  }
-}
-
-// must be called in:
-// slave tx event callback
-// or after beginTransmission(address)
-void TwoWire::send(uint8_t* data, uint8_t quantity)
-{
-  if(transmitting){
-  // in master transmitter mode
-    for(uint8_t i = 0; i < quantity; ++i){
-      send(data[i]);
-    }
-  }else{
-  // in slave send mode
-    // reply to master
-    twi_transmit(data, quantity);
-  }
-}
-
-// must be called in:
-// slave tx event callback
-// or after beginTransmission(address)
-void TwoWire::send(char* data)
-{
-  send((uint8_t*)data, strlen(data));
-}
-
-// must be called in:
-// slave tx event callback
-// or after beginTransmission(address)
-void TwoWire::send(int data)
-{
-  send((uint8_t)data);
-}
-
-// must be called in:
-// slave rx event callback
-// or after requestFrom(address, numBytes)
-uint8_t TwoWire::available(void)
-{
-  return rxBufferLength - rxBufferIndex;
-}
-
-// must be called in:
-// slave rx event callback
-// or after requestFrom(address, numBytes)
-uint8_t TwoWire::receive(void)
-{
-  // default to returning null char
-  // for people using with char strings
-  uint8_t value = '\0';
-  
-  // get each successive byte on each call
-  if(rxBufferIndex < rxBufferLength){
-    value = rxBuffer[rxBufferIndex];
-    ++rxBufferIndex;
-  }
-
-  return value;
-}
-
-// behind the scenes function that is called when data is received
-void TwoWire::onReceiveService(uint8_t* inBytes, int numBytes)
-{
-  // don't bother if user hasn't registered a callback
-  if(!user_onReceive){
-    return;
-  }
-  // don't bother if rx buffer is in use by a master requestFrom() op
-  // i know this drops data, but it allows for slight stupidity
-  // meaning, they may not have read all the master requestFrom() data yet
-  if(rxBufferIndex < rxBufferLength){
-    return;
-  }
-  // copy twi rx buffer into local read buffer
-  // this enables new reads to happen in parallel
-  for(uint8_t i = 0; i < numBytes; ++i){
-    rxBuffer[i] = inBytes[i];    
-  }
-  // set rx iterator vars
-  rxBufferIndex = 0;
-  rxBufferLength = numBytes;
-  // alert user program
-  user_onReceive(numBytes);
-}
-
-// behind the scenes function that is called when data is requested
-void TwoWire::onRequestService(void)
-{
-  // don't bother if user hasn't registered a callback
-  if(!user_onRequest){
-    return;
-  }
-  // reset tx buffer iterator vars
-  // !!! this will kill any pending pre-master sendTo() activity
-  txBufferIndex = 0;
-  txBufferLength = 0;
-  // alert user program
-  user_onRequest();
-}
-
-// sets function called on slave write
-void TwoWire::onReceive( void (*function)(int) )
-{
-  user_onReceive = function;
-}
-
-// sets function called on slave read
-void TwoWire::onRequest( void (*function)(void) )
-{
-  user_onRequest = function;
-}
-
-// Preinstantiate Objects //////////////////////////////////////////////////////
-
-TwoWire Wire = TwoWire();
-
diff --git a/core/libraries/Wire/Wire.h b/core/libraries/Wire/Wire.h
deleted file mode 100755
index 9c91b9b..0000000
--- a/core/libraries/Wire/Wire.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-  TwoWire.h - TWI/I2C library for Arduino & Wiring
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#ifndef TwoWire_h
-#define TwoWire_h
-
-#include <inttypes.h>
-
-#define BUFFER_LENGTH 32
-
-class TwoWire
-{
-  private:
-    static uint8_t* rxBuffer;
-    static uint8_t rxBufferIndex;
-    static uint8_t rxBufferLength;
-
-    static uint8_t txAddress;
-    static uint8_t* txBuffer;
-    static uint8_t txBufferIndex;
-    static uint8_t txBufferLength;
-
-    static uint8_t transmitting;
-    static void (*user_onRequest)(void);
-    static void (*user_onReceive)(int);
-    static void onRequestService(void);
-    static void onReceiveService(uint8_t*, int);
-  public:
-    TwoWire();
-    void begin();
-    void begin(uint8_t);
-    void begin(int);
-    void beginTransmission(uint8_t);
-    void beginTransmission(int);
-    void endTransmission(void);
-    void requestFrom(uint8_t, uint8_t);
-    void requestFrom(int, int);
-    void send(uint8_t);
-    void send(uint8_t*, uint8_t);
-    void send(int);
-    void send(char*);
-    uint8_t available(void);
-    uint8_t receive(void);
-    void onReceive( void (*)(int) );
-    void onRequest( void (*)(void) );
-};
-
-extern TwoWire Wire;
-
-#endif
-
diff --git a/core/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde b/core/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde
deleted file mode 100755
index c89b0f0..0000000
--- a/core/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.pde
+++ /dev/null
@@ -1,84 +0,0 @@
-// I2C SRF10 or SRF08 Devantech Ultrasonic Ranger Finder 
-// by Nicholas Zambetti <http://www.zambetti.com>
-// and James Tichenor <http://www.jamestichenor.net> 
-
-// Demonstrates use of the Wire library reading data from the 
-// Devantech Utrasonic Rangers SFR08 and SFR10
-
-// Created 29 April 2006
-
-#include <Wire.h>
-
-void setup()
-{
-  Wire.begin();                // join i2c bus (address optional for master)
-  Serial.begin(9600);          // start serial communication at 9600bps
-}
-
-int reading = 0;
-
-void loop()
-{
-  // step 1: instruct sensor to read echoes
-  Wire.beginTransmission(112); // transmit to device #112 (0x70)
-                               // the address specified in the datasheet is 224 (0xE0)
-                               // but i2c adressing uses the high 7 bits so it's 112
-  Wire.send(0x00);             // sets register pointer to the command register (0x00)  
-  Wire.send(0x50);             // command sensor to measure in "inches" (0x50) 
-                               // use 0x51 for centimeters
-                               // use 0x52 for ping microseconds
-  Wire.endTransmission();      // stop transmitting
-
-  // step 2: wait for readings to happen
-  delay(70);                   // datasheet suggests at least 65 milliseconds
-
-  // step 3: instruct sensor to return a particular echo reading
-  Wire.beginTransmission(112); // transmit to device #112
-  Wire.send(0x02);             // sets register pointer to echo #1 register (0x02)
-  Wire.endTransmission();      // stop transmitting
-
-  // step 4: request reading from sensor
-  Wire.requestFrom(112, 2);    // request 2 bytes from slave device #112
-
-  // step 5: receive reading from sensor
-  if(2 <= Wire.available())    // if two bytes were received
-  {
-    reading = Wire.receive();  // receive high byte (overwrites previous reading)
-    reading = reading << 8;    // shift high byte to be high 8 bits
-    reading |= Wire.receive(); // receive low byte as lower 8 bits
-    Serial.println(reading);   // print the reading
-  }
-
-  delay(250);                  // wait a bit since people have to read the output :)
-}
-
-
-/*
-
-// The following code changes the address of a Devantech Ultrasonic Range Finder (SRF10 or SRF08)
-// usage: changeAddress(0x70, 0xE6);
-
-void changeAddress(byte oldAddress, byte newAddress)
-{
-  Wire.beginTransmission(oldAddress);
-  Wire.send(0x00);
-  Wire.send(0xA0);
-  Wire.endTransmission();
-
-  Wire.beginTransmission(oldAddress);
-  Wire.send(0x00);
-  Wire.send(0xAA);
-  Wire.endTransmission();
-
-  Wire.beginTransmission(oldAddress);
-  Wire.send(0x00);
-  Wire.send(0xA5);
-  Wire.endTransmission();
-
-  Wire.beginTransmission(oldAddress);
-  Wire.send(0x00);
-  Wire.send(newAddress);
-  Wire.endTransmission();
-}
-
-*/
diff --git a/core/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde b/core/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde
deleted file mode 100644
index 35ee5d6..0000000
--- a/core/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.pde
+++ /dev/null
@@ -1,34 +0,0 @@
-// I2C Digital Potentiometer
-// by Nicholas Zambetti <http://www.zambetti.com>
-// and Shawn Bonkowski <http://people.interaction-ivrea.it/s.bonkowski/>
-
-// Demonstrates use of the Wire library
-// Controls AD5171 digital potentiometer via I2C/TWI
-
-// Created 31 March 2006
-
-#include <Wire.h>
-
-void setup()
-{
-  Wire.begin(); // join i2c bus (address optional for master)
-}
-
-byte val = 0;
-
-void loop()
-{
-  Wire.beginTransmission(44); // transmit to device #44 (0x2c)
-                              // device address is specified in datasheet
-  Wire.send(0x00);            // sends instruction byte  
-  Wire.send(val);             // sends potentiometer value byte  
-  Wire.endTransmission();     // stop transmitting
-
-  val++;        // increment value
-  if(val == 64) // if reached 64th position (max)
-  {
-    val = 0;    // start over from lowest value
-  }
-  delay(500);
-}
-
diff --git a/core/libraries/Wire/examples/master_reader/master_reader.pde b/core/libraries/Wire/examples/master_reader/master_reader.pde
deleted file mode 100644
index 1b139de..0000000
--- a/core/libraries/Wire/examples/master_reader/master_reader.pde
+++ /dev/null
@@ -1,29 +0,0 @@
-// Wire Master Reader
-// by Nicholas Zambetti <http://www.zambetti.com>
-
-// Demonstrates use of the Wire library
-// Reads data from an I2C/TWI slave device
-// Refer to the "Wire Slave Sender" example for use with this
-
-// Created 29 March 2006
-
-#include <Wire.h>
-
-void setup()
-{
-  Wire.begin();        // join i2c bus (address optional for master)
-  Serial.begin(9600);  // start serial for output
-}
-
-void loop()
-{
-  Wire.requestFrom(2, 6);    // request 6 bytes from slave device #2
-
-  while(Wire.available())    // slave may send less than requested
-  { 
-    char c = Wire.receive(); // receive a byte as character
-    Serial.print(c);         // print the character
-  }
-
-  delay(500);
-}
diff --git a/core/libraries/Wire/examples/master_writer/master_writer.pde b/core/libraries/Wire/examples/master_writer/master_writer.pde
deleted file mode 100644
index d0ff9fa..0000000
--- a/core/libraries/Wire/examples/master_writer/master_writer.pde
+++ /dev/null
@@ -1,28 +0,0 @@
-// Wire Master Writer
-// by Nicholas Zambetti <http://www.zambetti.com>
-
-// Demonstrates use of the Wire library
-// Writes data to an I2C/TWI slave device
-// Refer to the "Wire Slave Receiver" example for use with this
-
-// Created 29 March 2006
-
-#include <Wire.h>
-
-void setup()
-{
-  Wire.begin(); // join i2c bus (address optional for master)
-}
-
-byte x = 0;
-
-void loop()
-{
-  Wire.beginTransmission(4); // transmit to device #4
-  Wire.send("x is ");        // sends five bytes
-  Wire.send(x);              // sends one byte  
-  Wire.endTransmission();    // stop transmitting
-
-  x++;
-  delay(500);
-}
diff --git a/core/libraries/Wire/examples/slave_receiver/slave_receiver.pde b/core/libraries/Wire/examples/slave_receiver/slave_receiver.pde
deleted file mode 100644
index 53c86b5..0000000
--- a/core/libraries/Wire/examples/slave_receiver/slave_receiver.pde
+++ /dev/null
@@ -1,35 +0,0 @@
-// Wire Slave Receiver
-// by Nicholas Zambetti <http://www.zambetti.com>
-
-// Demonstrates use of the Wire library
-// Receives data as an I2C/TWI slave device
-// Refer to the "Wire Master Writer" example for use with this
-
-// Created 29 March 2006
-
-#include <Wire.h>
-
-void setup()
-{
-  Wire.begin(4);                // join i2c bus with address #4
-  Wire.onReceive(receiveEvent); // register event
-  Serial.begin(9600);           // start serial for output
-}
-
-void loop()
-{
-  delay(100);
-}
-
-// function that executes whenever data is received from master
-// this function is registered as an event, see setup()
-void receiveEvent(int howMany)
-{
-  while(1 < Wire.available()) // loop through all but the last
-  {
-    char c = Wire.receive(); // receive byte as a character
-    Serial.print(c);         // print the character
-  }
-  int x = Wire.receive();    // receive byte as an integer
-  Serial.println(x);         // print the integer
-}
diff --git a/core/libraries/Wire/examples/slave_sender/slave_sender.pde b/core/libraries/Wire/examples/slave_sender/slave_sender.pde
deleted file mode 100644
index f500644..0000000
--- a/core/libraries/Wire/examples/slave_sender/slave_sender.pde
+++ /dev/null
@@ -1,29 +0,0 @@
-// Wire Slave Sender
-// by Nicholas Zambetti <http://www.zambetti.com>
-
-// Demonstrates use of the Wire library
-// Sends data as an I2C/TWI slave device
-// Refer to the "Wire Master Reader" example for use with this
-
-// Created 29 March 2006
-
-#include <Wire.h>
-
-void setup()
-{
-  Wire.begin(2);                // join i2c bus with address #2
-  Wire.onRequest(requestEvent); // register event
-}
-
-void loop()
-{
-  delay(100);
-}
-
-// function that executes whenever data is requested by master
-// this function is registered as an event, see setup()
-void requestEvent()
-{
-  Wire.send("hello "); // respond with message of 6 bytes
-                       // as expected by master
-}
diff --git a/core/libraries/Wire/keywords.txt b/core/libraries/Wire/keywords.txt
deleted file mode 100644
index 12f129b..0000000
--- a/core/libraries/Wire/keywords.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-#######################################
-# Syntax Coloring Map For Wire
-#######################################
-
-#######################################
-# Datatypes (KEYWORD1)
-#######################################
-
-#######################################
-# Methods and Functions (KEYWORD2)
-#######################################
-
-begin	KEYWORD2
-beginTransmission	KEYWORD2
-endTransmission	KEYWORD2
-requestFrom	KEYWORD2
-send	KEYWORD2
-receive	KEYWORD2
-onReceive	KEYWORD2
-onRequest	KEYWORD2
-
-#######################################
-# Instances (KEYWORD2)
-#######################################
-
-Wire	KEYWORD2
-
-#######################################
-# Constants (LITERAL1)
-#######################################
-
diff --git a/core/libraries/Wire/utility/twi.c b/core/libraries/Wire/utility/twi.c
deleted file mode 100644
index 2235b0b..0000000
--- a/core/libraries/Wire/utility/twi.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
-  twi.c - TWI/I2C library for Wiring & Arduino
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#include <math.h>
-#include <stdlib.h>
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/signal.h>
-#include <compat/twi.h>
-
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#endif
-
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
-#include "twi.h"
-
-static volatile uint8_t twi_state;
-static uint8_t twi_slarw;
-
-static void (*twi_onSlaveTransmit)(void);
-static void (*twi_onSlaveReceive)(uint8_t*, int);
-
-static uint8_t* twi_masterBuffer;
-static volatile uint8_t twi_masterBufferIndex;
-static uint8_t twi_masterBufferLength;
-
-static uint8_t* twi_txBuffer;
-static volatile uint8_t twi_txBufferIndex;
-static volatile uint8_t twi_txBufferLength;
-
-static uint8_t* twi_rxBuffer;
-static volatile uint8_t twi_rxBufferIndex;
-
-/* 
- * Function twi_init
- * Desc     readys twi pins and sets twi bitrate
- * Input    none
- * Output   none
- */
-void twi_init(void)
-{
-  // initialize state
-  twi_state = TWI_READY;
-
-  #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__)
-    // activate internal pull-ups for twi
-    // as per note from atmega8 manual pg167
-    sbi(PORTC, 4);
-    sbi(PORTC, 5);
-  #else
-    // activate internal pull-ups for twi
-    // as per note from atmega128 manual pg204
-    sbi(PORTD, 0);
-    sbi(PORTD, 1);
-  #endif
-
-  // initialize twi prescaler and bit rate
-  cbi(TWSR, TWPS0);
-  cbi(TWSR, TWPS1);
-  TWBR = ((CPU_FREQ / TWI_FREQ) - 16) / 2;
-
-  /* twi bit rate formula from atmega128 manual pg 204
-  SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR))
-  note: TWBR should be 10 or higher for master mode
-  It is 72 for a 16mhz Wiring board with 100kHz TWI */
-
-  // enable twi module, acks, and twi interrupt
-	TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
-	
-	// allocate buffers
-  twi_masterBuffer = (uint8_t*) calloc(TWI_BUFFER_LENGTH, sizeof(uint8_t));
-  twi_txBuffer = (uint8_t*) calloc(TWI_BUFFER_LENGTH, sizeof(uint8_t));
-  twi_rxBuffer = (uint8_t*) calloc(TWI_BUFFER_LENGTH, sizeof(uint8_t));
-}
-
-/* 
- * Function twi_slaveInit
- * Desc     sets slave address and enables interrupt
- * Input    none
- * Output   none
- */
-void twi_setAddress(uint8_t address)
-{
-  // set twi slave address (skip over TWGCE bit)
-  TWAR = address << 1;
-}
-
-/* 
- * Function twi_readFrom
- * Desc     attempts to become twi bus master and read a
- *          series of bytes from a device on the bus
- * Input    address: 7bit i2c device address
- *          data: pointer to byte array
- *          length: number of bytes to read into array
- * Output   byte: 0 ok, 1 length too long for buffer
- */
-uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length)
-{
-  uint8_t i;
-
-  // ensure data will fit into buffer
-  if(TWI_BUFFER_LENGTH < length){
-    return 1;
-  }
-
-  // wait until twi is ready, become master receiver
-  while(TWI_READY != twi_state){
-    continue;
-  }
-  twi_state = TWI_MRX;
-
-  // initialize buffer iteration vars
-  twi_masterBufferIndex = 0;
-  twi_masterBufferLength = length;
-
-  // build sla+w, slave device address + w bit
-  twi_slarw = TW_READ;
-	twi_slarw |= address << 1;
-
-  // send start condition
-	TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
-
-	// wait for read operation to complete
-	while(TWI_MRX == twi_state){
-	  continue;
-	}
-
-  // copy twi buffer to data
-  for(i = 0; i < length; ++i){
-    data[i] = twi_masterBuffer[i];
-  }
-	
-	return 0;
-}
-
-/* 
- * Function twi_writeTo
- * Desc     attempts to become twi bus master and write a
- *          series of bytes to a device on the bus
- * Input    address: 7bit i2c device address
- *          data: pointer to byte array
- *          length: number of bytes in array
- *          wait: boolean indicating to wait for write or not
- * Output   byte: 0 ok, 1 length too long for buffer
- */
-uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait)
-{
-  uint8_t i;
-
-  // ensure data will fit into buffer
-  if(TWI_BUFFER_LENGTH < length){
-    return 1;
-  }
-
-  // wait until twi is ready, become master transmitter
-  while(TWI_READY != twi_state){
-    continue;
-  }
-  twi_state = TWI_MTX;
-
-  // initialize buffer iteration vars
-  twi_masterBufferIndex = 0;
-  twi_masterBufferLength = length;
-  
-  // copy data to twi buffer
-  for(i = 0; i < length; ++i){
-    twi_masterBuffer[i] = data[i];
-  }
-  
-  // build sla+w, slave device address + w bit
-  twi_slarw = TW_WRITE;
-	twi_slarw |= address << 1;
-  
-  // send start condition
-	TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
-
-	// wait for write operation to complete
-	while(wait && (TWI_MTX == twi_state)){
-	  continue;
-	}
-	
-	return 0;
-}
-
-/* 
- * Function twi_transmit
- * Desc     fills slave tx buffer with data
- *          must be called in slave tx event callback
- * Input    data: pointer to byte array
- *          length: number of bytes in array
- * Output   1 length too long for buffer
- *          2 not slave transmitter
- *          0 ok
- */
-uint8_t twi_transmit(uint8_t* data, uint8_t length)
-{
-  uint8_t i;
-
-  // ensure data will fit into buffer
-  if(TWI_BUFFER_LENGTH < length){
-    return 1;
-  }
-  
-  // ensure we are currently a slave transmitter
-  if(TWI_STX != twi_state){
-    return 2;
-  }
-  
-  // set length and copy data into tx buffer
-  twi_txBufferLength = length;
-  for(i = 0; i < length; ++i){
-    twi_txBuffer[i] = data[i];
-  }
-  
-  return 0;
-}
-
-/* 
- * Function twi_attachSlaveRxEvent
- * Desc     sets function called before a slave read operation
- * Input    function: callback function to use
- * Output   none
- */
-void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) )
-{
-  twi_onSlaveReceive = function;
-}
-
-/* 
- * Function twi_attachSlaveTxEvent
- * Desc     sets function called before a slave write operation
- * Input    function: callback function to use
- * Output   none
- */
-void twi_attachSlaveTxEvent( void (*function)(void) )
-{
-  twi_onSlaveTransmit = function;
-}
-
-/* 
- * Function twi_reply
- * Desc     sends byte or readys receive line
- * Input    ack: byte indicating to ack or to nack
- * Output   none
- */
-void twi_reply(uint8_t ack)
-{
-	// transmit master read ready signal, with or without ack
-	if(ack){
-	  TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
-  }else{
-	  TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
-  }
-}
-
-/* 
- * Function twi_stop
- * Desc     relinquishes bus master status
- * Input    none
- * Output   none
- */
-void twi_stop(void)
-{
-  // send stop condition
-  TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
-
-  // wait for stop condition to be exectued on bus
-  // TWINT is not set after a stop condition!
-  while(TWCR & _BV(TWSTO)){
-    continue;
-  }
-
-  // update twi state
-  twi_state = TWI_READY;
-}
-
-/* 
- * Function twi_releaseBus
- * Desc     releases bus control
- * Input    none
- * Output   none
- */
-void twi_releaseBus(void)
-{
-  // release bus
-  TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
-
-  // update twi state
-  twi_state = TWI_READY;
-}
-
-SIGNAL(SIG_2WIRE_SERIAL)
-{
-  switch(TW_STATUS){
-    // All Master
-    case TW_START:     // sent start condition
-    case TW_REP_START: // sent repeated start condition
-      // copy device address and r/w bit to output register and ack
-      TWDR = twi_slarw;
-      twi_reply(1);
-      break;
-
-    // Master Transmitter
-    case TW_MT_SLA_ACK:  // slave receiver acked address
-    case TW_MT_DATA_ACK: // slave receiver acked data
-      // if there is data to send, send it, otherwise stop 
-      if(twi_masterBufferIndex < twi_masterBufferLength){
-        // copy data to output register and ack
-        TWDR = twi_masterBuffer[twi_masterBufferIndex++];
-        twi_reply(1);
-      }else{
-        twi_stop();
-      }
-      break;
-    case TW_MT_SLA_NACK:  // address sent, nack received
-    case TW_MT_DATA_NACK: // data sent, nack received
-      twi_stop();
-      break;
-    case TW_MT_ARB_LOST: // lost bus arbitration
-      twi_releaseBus();
-      break;
-
-    // Master Receiver
-    case TW_MR_DATA_ACK: // data received, ack sent
-      // put byte into buffer
-      twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
-    case TW_MR_SLA_ACK:  // address sent, ack received
-      // ack if more bytes are expected, otherwise nack
-      if(twi_masterBufferIndex < twi_masterBufferLength){
-        twi_reply(1);
-      }else{
-        twi_reply(0);
-      }
-      break;
-    case TW_MR_DATA_NACK: // data received, nack sent
-      // put final byte into buffer
-      twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
-    case TW_MR_SLA_NACK: // address sent, nack received
-      twi_stop();
-      break;
-    // TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case
-
-    // Slave Receiver
-    case TW_SR_SLA_ACK:   // addressed, returned ack
-    case TW_SR_GCALL_ACK: // addressed generally, returned ack
-    case TW_SR_ARB_LOST_SLA_ACK:   // lost arbitration, returned ack
-    case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack
-      // enter slave receiver mode
-      twi_state = TWI_SRX;
-      // indicate that rx buffer can be overwritten and ack
-      twi_rxBufferIndex = 0;
-      twi_reply(1);
-      break;
-    case TW_SR_DATA_ACK:       // data received, returned ack
-    case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack
-      // if there is still room in the rx buffer
-      if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
-        // put byte in buffer and ack
-        twi_rxBuffer[twi_rxBufferIndex++] = TWDR;
-        twi_reply(1);
-      }else{
-        // otherwise nack
-        twi_reply(0);
-      }
-      break;
-    case TW_SR_STOP: // stop or repeated start condition received
-      // put a null char after data if there's room
-      if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
-        twi_rxBuffer[twi_rxBufferIndex] = '\0';
-      }
-      // callback to user defined callback
-      twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex);
-      // ack future responses
-      twi_reply(1);
-      // leave slave receiver state
-      twi_state = TWI_READY;
-      break;
-    case TW_SR_DATA_NACK:       // data received, returned nack
-    case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack
-      // nack back at master
-      twi_reply(0);
-      break;
-    
-    // Slave Transmitter
-    case TW_ST_SLA_ACK:          // addressed, returned ack
-    case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack
-      // enter slave transmitter mode
-      twi_state = TWI_STX;
-      // ready the tx buffer index for iteration
-      twi_txBufferIndex = 0;
-      // set tx buffer length to be zero, to verify if user changes it
-      twi_txBufferLength = 0;
-      // request for txBuffer to be filled and length to be set
-      // note: user must call twi_transmit(bytes, length) to do this
-      twi_onSlaveTransmit();
-      // if they didn't change buffer & length, initialize it
-      if(0 == twi_txBufferLength){
-        twi_txBufferLength = 1;
-        twi_txBuffer[0] = 0x00;
-      }
-      // transmit first byte from buffer, fall
-    case TW_ST_DATA_ACK: // byte sent, ack returned
-      // copy data to output register
-      TWDR = twi_txBuffer[twi_txBufferIndex++];
-      // if there is more to send, ack, otherwise nack
-      if(twi_txBufferIndex < twi_txBufferLength){
-        twi_reply(1);
-      }else{
-        twi_reply(0);
-      }
-      break;
-    case TW_ST_DATA_NACK: // received nack, we are done 
-    case TW_ST_LAST_DATA: // received ack, but we are done already!
-      // ack future responses
-      twi_reply(1);
-      // leave slave receiver state
-      twi_state = TWI_READY;
-      break;
-
-    // All
-    case TW_NO_INFO:   // no state information
-      break;
-    case TW_BUS_ERROR: // bus error, illegal stop/start
-      twi_stop();
-      break;
-  }
-}
-
diff --git a/core/libraries/Wire/utility/twi.h b/core/libraries/Wire/utility/twi.h
deleted file mode 100755
index 7ccbf5c..0000000
--- a/core/libraries/Wire/utility/twi.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
-  twi.h - TWI/I2C library for Wiring & Arduino
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#ifndef twi_h

-#define twi_h

-
-  #include <inttypes.h>
-
-  //#define ATMEGA8
-
-  #ifndef CPU_FREQ

-  #define CPU_FREQ 16000000L
-  #endif
-
-  #ifndef TWI_FREQ

-  #define TWI_FREQ 100000L
-  #endif
-
-  #ifndef TWI_BUFFER_LENGTH
-  #define TWI_BUFFER_LENGTH 32
-  #endif
-
-  #define TWI_READY 0
-  #define TWI_MRX   1
-  #define TWI_MTX   2
-  #define TWI_SRX   3
-  #define TWI_STX   4
-  
-  void twi_init(void);
-  void twi_setAddress(uint8_t);
-  uint8_t twi_readFrom(uint8_t, uint8_t*, uint8_t);
-  uint8_t twi_writeTo(uint8_t, uint8_t*, uint8_t, uint8_t);
-  uint8_t twi_transmit(uint8_t*, uint8_t);
-  void twi_attachSlaveRxEvent( void (*)(uint8_t*, int) );
-  void twi_attachSlaveTxEvent( void (*)(void) );
-  void twi_reply(uint8_t);
-  void twi_stop(void);
-  void twi_releaseBus(void);

-

-#endif
-