Remove non-USB boards

Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around.

1 files changed, 0 insertions, 672 deletions

diff --git a/bootloaders/optiboot/optiboot.c b/bootloaders/optiboot/optiboot.c
deleted file mode 100644
index bd3a1db..0000000
--- a/bootloaders/optiboot/optiboot.c
+++ /dev/null
@@ -1,672 +0,0 @@
-/**********************************************************/
-/* Optiboot bootloader for Arduino                        */
-/*                                                        */
-/* http://optiboot.googlecode.com                         */
-/*                                                        */
-/* Arduino-maintained version : See README.TXT            */
-/* http://code.google.com/p/arduino/                      */
-/*                                                        */
-/* Heavily optimised bootloader that is faster and        */
-/* smaller than the Arduino standard bootloader           */
-/*                                                        */
-/* Enhancements:                                          */
-/*   Fits in 512 bytes, saving 1.5K of code space         */
-/*   Background page erasing speeds up programming        */
-/*   Higher baud rate speeds up programming               */
-/*   Written almost entirely in C                         */
-/*   Customisable timeout with accurate timeconstant      */
-/*   Optional virtual UART. No hardware UART required.    */
-/*   Optional virtual boot partition for devices without. */
-/*                                                        */
-/* What you lose:                                         */
-/*   Implements a skeleton STK500 protocol which is       */
-/*     missing several features including EEPROM          */
-/*     programming and non-page-aligned writes            */
-/*   High baud rate breaks compatibility with standard    */
-/*     Arduino flash settings                             */
-/*                                                        */
-/* Fully supported:                                       */
-/*   ATmega168 based devices  (Diecimila etc)             */
-/*   ATmega328P based devices (Duemilanove etc)           */
-/*                                                        */
-/* Alpha test                                             */
-/*   ATmega1280 based devices (Arduino Mega)              */
-/*                                                        */
-/* Work in progress:                                      */
-/*   ATmega644P based devices (Sanguino)                  */
-/*   ATtiny84 based devices (Luminet)                     */
-/*                                                        */
-/* Does not support:                                      */
-/*   USB based devices (eg. Teensy)                       */
-/*                                                        */
-/* Assumptions:                                           */
-/*   The code makes several assumptions that reduce the   */
-/*   code size. They are all true after a hardware reset, */
-/*   but may not be true if the bootloader is called by   */
-/*   other means or on other hardware.                    */
-/*     No interrupts can occur                            */
-/*     UART and Timer 1 are set to their reset state      */
-/*     SP points to RAMEND                                */
-/*                                                        */
-/* Code builds on code, libraries and optimisations from: */
-/*   stk500boot.c          by Jason P. Kyle               */
-/*   Arduino bootloader    http://www.arduino.cc          */
-/*   Spiff's 1K bootloader http://spiffie.org/know/arduino_1k_bootloader/bootloader.shtml */
-/*   avr-libc project      http://nongnu.org/avr-libc     */
-/*   Adaboot               http://www.ladyada.net/library/arduino/bootloader.html */
-/*   AVR305                Atmel Application Note         */
-/*                                                        */
-/* This program is free software; you can redistribute it */
-/* and/or modify it under the terms of the GNU General    */
-/* Public License as published by the Free Software       */
-/* Foundation; either version 2 of the License, or        */
-/* (at your option) any later version.                    */
-/*                                                        */
-/* This program is distributed in the hope that it will   */
-/* be useful, but WITHOUT ANY WARRANTY; without even the  */
-/* implied warranty of MERCHANTABILITY or FITNESS FOR A   */
-/* PARTICULAR PURPOSE.  See the GNU General Public        */
-/* License for more details.                              */
-/*                                                        */
-/* You should have received a copy of the GNU General     */
-/* Public License along with this program; if not, write  */
-/* to the Free Software Foundation, Inc.,                 */
-/* 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA */
-/*                                                        */
-/* Licence can be viewed at                               */
-/* http://www.fsf.org/licenses/gpl.txt                    */
-/*                                                        */
-/**********************************************************/
-
-
-/**********************************************************/
-/*                                                        */
-/* Optional defines:                                      */
-/*                                                        */
-/**********************************************************/
-/*                                                        */
-/* BIG_BOOT:                                              */
-/* Build a 1k bootloader, not 512 bytes. This turns on    */
-/* extra functionality.                                   */
-/*                                                        */
-/* BAUD_RATE:                                             */
-/* Set bootloader baud rate.                              */
-/*                                                        */
-/* LUDICROUS_SPEED:                                       */
-/* 230400 baud :-)                                        */
-/*                                                        */
-/* SOFT_UART:                                             */
-/* Use AVR305 soft-UART instead of hardware UART.         */
-/*                                                        */
-/* LED_START_FLASHES:                                     */
-/* Number of LED flashes on bootup.                       */
-/*                                                        */
-/* LED_DATA_FLASH:                                        */
-/* Flash LED when transferring data. For boards without   */
-/* TX or RX LEDs, or for people who like blinky lights.   */
-/*                                                        */
-/* SUPPORT_EEPROM:                                        */
-/* Support reading and writing from EEPROM. This is not   */
-/* used by Arduino, so off by default.                    */
-/*                                                        */
-/* TIMEOUT_MS:                                            */
-/* Bootloader timeout period, in milliseconds.            */
-/* 500,1000,2000,4000,8000 supported.                     */
-/*                                                        */
-/**********************************************************/
-
-/**********************************************************/
-/* Version Numbers!                                       */
-/*                                                        */
-/* Arduino Optiboot now includes this Version number in   */
-/* the source and object code.                            */
-/*                                                        */
-/* Version 3 was released as zip from the optiboot        */
-/*  repository and was distributed with Arduino 0022.     */
-/* Version 4 starts with the arduino repository commit    */
-/*  that brought the arduino repository up-to-date with   */
-/* the optiboot source tree changes since v3.             */
-/*                                                        */
-/**********************************************************/
-
-/**********************************************************/
-/* Edit History:					  */
-/*							  */
-/* 4.4 WestfW: add initialization of address to keep      */
-/*             the compiler happy.  Change SC'ed targets. */
-/*             Return the SW version via READ PARAM       */
-/* 4.3 WestfW: catch framing errors in getch(), so that   */
-/*             AVRISP works without HW kludges.           */
-/*  http://code.google.com/p/arduino/issues/detail?id=368n*/
-/* 4.2 WestfW: reduce code size, fix timeouts, change     */
-/*             verifySpace to use WDT instead of appstart */
-/* 4.1 WestfW: put version number in binary.		  */
-/**********************************************************/
-
-#define OPTIBOOT_MAJVER 4
-#define OPTIBOOT_MINVER 4
-
-#define MAKESTR(a) #a
-#define MAKEVER(a, b) MAKESTR(a*256+b)
-
-asm("  .section .version\n"
-    "optiboot_version:  .word " MAKEVER(OPTIBOOT_MAJVER, OPTIBOOT_MINVER) "\n"
-    "  .section .text\n");
-
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-
-// <avr/boot.h> uses sts instructions, but this version uses out instructions
-// This saves cycles and program memory.
-#include "boot.h"
-
-
-// We don't use <avr/wdt.h> as those routines have interrupt overhead we don't need.
-
-#include "pin_defs.h"
-#include "stk500.h"
-
-#ifndef LED_START_FLASHES
-#define LED_START_FLASHES 0
-#endif
-
-#ifdef LUDICROUS_SPEED
-#define BAUD_RATE 230400L
-#endif
-
-/* set the UART baud rate defaults */
-#ifndef BAUD_RATE
-#if F_CPU >= 8000000L
-#define BAUD_RATE   115200L // Highest rate Avrdude win32 will support
-#elsif F_CPU >= 1000000L
-#define BAUD_RATE   9600L   // 19200 also supported, but with significant error
-#elsif F_CPU >= 128000L
-#define BAUD_RATE   4800L   // Good for 128kHz internal RC
-#else
-#define BAUD_RATE 1200L     // Good even at 32768Hz
-#endif
-#endif
-
-/* Switch in soft UART for hard baud rates */
-#if (F_CPU/BAUD_RATE) > 280 // > 57600 for 16MHz
-#ifndef SOFT_UART
-#define SOFT_UART
-#endif
-#endif
-
-/* Watchdog settings */
-#define WATCHDOG_OFF    (0)
-#define WATCHDOG_16MS   (_BV(WDE))
-#define WATCHDOG_32MS   (_BV(WDP0) | _BV(WDE))
-#define WATCHDOG_64MS   (_BV(WDP1) | _BV(WDE))
-#define WATCHDOG_125MS  (_BV(WDP1) | _BV(WDP0) | _BV(WDE))
-#define WATCHDOG_250MS  (_BV(WDP2) | _BV(WDE))
-#define WATCHDOG_500MS  (_BV(WDP2) | _BV(WDP0) | _BV(WDE))
-#define WATCHDOG_1S     (_BV(WDP2) | _BV(WDP1) | _BV(WDE))
-#define WATCHDOG_2S     (_BV(WDP2) | _BV(WDP1) | _BV(WDP0) | _BV(WDE))
-#ifndef __AVR_ATmega8__
-#define WATCHDOG_4S     (_BV(WDP3) | _BV(WDE))
-#define WATCHDOG_8S     (_BV(WDP3) | _BV(WDP0) | _BV(WDE))
-#endif
-
-/* Function Prototypes */
-/* The main function is in init9, which removes the interrupt vector table */
-/* we don't need. It is also 'naked', which means the compiler does not    */
-/* generate any entry or exit code itself. */
-int main(void) __attribute__ ((naked)) __attribute__ ((section (".init9")));
-void putch(char);
-uint8_t getch(void);
-static inline void getNch(uint8_t); /* "static inline" is a compiler hint to reduce code size */
-void verifySpace();
-static inline void flash_led(uint8_t);
-uint8_t getLen();
-static inline void watchdogReset();
-void watchdogConfig(uint8_t x);
-#ifdef SOFT_UART
-void uartDelay() __attribute__ ((naked));
-#endif
-void appStart() __attribute__ ((naked));
-
-#if defined(__AVR_ATmega168__)
-#define RAMSTART (0x100)
-#define NRWWSTART (0x3800)
-#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
-#define RAMSTART (0x100)
-#define NRWWSTART (0x7000)
-#elif defined (__AVR_ATmega644P__)
-#define RAMSTART (0x100)
-#define NRWWSTART (0xE000)
-#elif defined(__AVR_ATtiny84__)
-#define RAMSTART (0x100)
-#define NRWWSTART (0x0000)
-#elif defined(__AVR_ATmega1280__)
-#define RAMSTART (0x200)
-#define NRWWSTART (0xE000)
-#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
-#define RAMSTART (0x100)
-#define NRWWSTART (0x1800)
-#endif
-
-/* C zero initialises all global variables. However, that requires */
-/* These definitions are NOT zero initialised, but that doesn't matter */
-/* This allows us to drop the zero init code, saving us memory */
-#define buff    ((uint8_t*)(RAMSTART))
-#ifdef VIRTUAL_BOOT_PARTITION
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
-  uint8_t ch;
-
-  /*
-   * Making these local and in registers prevents the need for initializing
-   * them, and also saves space because code no longer stores to memory.
-   * (initializing address keeps the compiler happy, but isn't really
-   *  necessary, and uses 4 bytes of flash.)
-   */
-  register uint16_t address = 0;
-  register uint8_t  length;
-
-  // After the zero init loop, this is the first code to run.
-  //
-  // This code makes the following assumptions:
-  //  No interrupts will execute
-  //  SP points to RAMEND
-  //  r1 contains zero
-  //
-  // If not, uncomment the following instructions:
-  // cli();
-  asm volatile ("clr __zero_reg__");
-#ifdef __AVR_ATmega8__
-  SP=RAMEND;  // This is done by hardware reset
-#endif
-
-  // Adaboot no-wait mod
-  ch = MCUSR;
-  MCUSR = 0;
-  if (!(ch & _BV(EXTRF))) appStart();
-
-#if LED_START_FLASHES > 0
-  // Set up Timer 1 for timeout counter
-  TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
-#endif
-#ifndef SOFT_UART
-#ifdef __AVR_ATmega8__
-  UCSRA = _BV(U2X); //Double speed mode USART
-  UCSRB = _BV(RXEN) | _BV(TXEN);  // enable Rx & Tx
-  UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0);  // config USART; 8N1
-  UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
-#else
-  UCSR0A = _BV(U2X0); //Double speed mode USART0
-  UCSR0B = _BV(RXEN0) | _BV(TXEN0);
-  UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
-  UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
-#endif
-#endif
-
-  // Set up watchdog to trigger after 500ms
-  watchdogConfig(WATCHDOG_1S);
-
-  /* Set LED pin as output */
-  LED_DDR |= _BV(LED);
-
-#ifdef SOFT_UART
-  /* Set TX pin as output */
-  UART_DDR |= _BV(UART_TX_BIT);
-#endif
-
-#if LED_START_FLASHES > 0
-  /* Flash onboard LED to signal entering of bootloader */
-  flash_led(LED_START_FLASHES * 2);
-#endif
-
-  /* Forever loop */
-  for (;;) {
-    /* get character from UART */
-    ch = getch();
-
-    if(ch == STK_GET_PARAMETER) {
-      unsigned char which = getch();
-      verifySpace();
-      if (which == 0x82) {
-	/*
-	 * Send optiboot version as "minor SW version"
-	 */
-	putch(OPTIBOOT_MINVER);
-      } else if (which == 0x81) {
-	  putch(OPTIBOOT_MAJVER);
-      } else {
-	/*
-	 * GET PARAMETER returns a generic 0x03 reply for
-         * other parameters - enough to keep Avrdude happy
-	 */
-	putch(0x03);
-      }
-    }
-    else if(ch == STK_SET_DEVICE) {
-      // SET DEVICE is ignored
-      getNch(20);
-    }
-    else if(ch == STK_SET_DEVICE_EXT) {
-      // SET DEVICE EXT is ignored
-      getNch(5);
-    }
-    else if(ch == STK_LOAD_ADDRESS) {
-      // LOAD ADDRESS
-      uint16_t newAddress;
-      newAddress = getch();
-      newAddress = (newAddress & 0xff) | (getch() << 8);
-#ifdef RAMPZ
-      // Transfer top bit to RAMPZ
-      RAMPZ = (newAddress & 0x8000) ? 1 : 0;
-#endif
-      newAddress += newAddress; // Convert from word address to byte address
-      address = newAddress;
-      verifySpace();
-    }
-    else if(ch == STK_UNIVERSAL) {
-      // UNIVERSAL command is ignored
-      getNch(4);
-      putch(0x00);
-    }
-    /* Write memory, length is big endian and is in bytes */
-    else if(ch == STK_PROG_PAGE) {
-      // PROGRAM PAGE - we support flash programming only, not EEPROM
-      uint8_t *bufPtr;
-      uint16_t addrPtr;
-
-      getch();			/* getlen() */
-      length = getch();
-      getch();
-
-      // If we are in RWW section, immediately start page erase
-      if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
-
-      // While that is going on, read in page contents
-      bufPtr = buff;
-      do *bufPtr++ = getch();
-      while (--length);
-
-      // If we are in NRWW section, page erase has to be delayed until now.
-      // Todo: Take RAMPZ into account
-      if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
-
-      // Read command terminator, start reply
-      verifySpace();
-
-      // If only a partial page is to be programmed, the erase might not be complete.
-      // So check that here
-      boot_spm_busy_wait();
-
-#ifdef VIRTUAL_BOOT_PARTITION
-      if ((uint16_t)(void*)address == 0) {
-        // This is the reset vector page. We need to live-patch the code so the
-        // bootloader runs.
-        //
-        // Move RESET vector to WDT vector
-        uint16_t vect = buff[0] | (buff[1]<<8);
-        rstVect = vect;
-        wdtVect = buff[8] | (buff[9]<<8);
-        vect -= 4; // Instruction is a relative jump (rjmp), so recalculate.
-        buff[8] = vect & 0xff;
-        buff[9] = vect >> 8;
-
-        // Add jump to bootloader at RESET vector
-        buff[0] = 0x7f;
-        buff[1] = 0xce; // rjmp 0x1d00 instruction
-      }
-#endif
-
-      // Copy buffer into programming buffer
-      bufPtr = buff;
-      addrPtr = (uint16_t)(void*)address;
-      ch = SPM_PAGESIZE / 2;
-      do {
-        uint16_t a;
-        a = *bufPtr++;
-        a |= (*bufPtr++) << 8;
-        __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
-        addrPtr += 2;
-      } while (--ch);
-
-      // Write from programming buffer
-      __boot_page_write_short((uint16_t)(void*)address);
-      boot_spm_busy_wait();
-
-#if defined(RWWSRE)
-      // Reenable read access to flash
-      boot_rww_enable();
-#endif
-
-    }
-    /* Read memory block mode, length is big endian.  */
-    else if(ch == STK_READ_PAGE) {
-      // READ PAGE - we only read flash
-      getch();			/* getlen() */
-      length = getch();
-      getch();
-
-      verifySpace();
-#ifdef VIRTUAL_BOOT_PARTITION
-      do {
-        // Undo vector patch in bottom page so verify passes
-        if (address == 0)       ch=rstVect & 0xff;
-        else if (address == 1)  ch=rstVect >> 8;
-        else if (address == 8)  ch=wdtVect & 0xff;
-        else if (address == 9) ch=wdtVect >> 8;
-        else ch = pgm_read_byte_near(address);
-        address++;
-        putch(ch);
-      } while (--length);
-#else
-#ifdef __AVR_ATmega1280__
-//      do putch(pgm_read_byte_near(address++));
-//      while (--length);
-      do {
-        uint8_t result;
-        __asm__ ("elpm %0,Z\n":"=r"(result):"z"(address));
-        putch(result);
-        address++;
-      }
-      while (--length);
-#else
-      do putch(pgm_read_byte_near(address++));
-      while (--length);
-#endif
-#endif
-    }
-
-    /* Get device signature bytes  */
-    else if(ch == STK_READ_SIGN) {
-      // READ SIGN - return what Avrdude wants to hear
-      verifySpace();
-      putch(SIGNATURE_0);
-      putch(SIGNATURE_1);
-      putch(SIGNATURE_2);
-    }
-    else if (ch == 'Q') {
-      // Adaboot no-wait mod
-      watchdogConfig(WATCHDOG_16MS);
-      verifySpace();
-    }
-    else {
-      // This covers the response to commands like STK_ENTER_PROGMODE
-      verifySpace();
-    }
-    putch(STK_OK);
-  }
-}
-
-void putch(char ch) {
-#ifndef SOFT_UART
-  while (!(UCSR0A & _BV(UDRE0)));
-  UDR0 = ch;
-#else
-  __asm__ __volatile__ (
-    "   com %[ch]\n" // ones complement, carry set
-    "   sec\n"
-    "1: brcc 2f\n"
-    "   cbi %[uartPort],%[uartBit]\n"
-    "   rjmp 3f\n"
-    "2: sbi %[uartPort],%[uartBit]\n"
-    "   nop\n"
-    "3: rcall uartDelay\n"
-    "   rcall uartDelay\n"
-    "   lsr %[ch]\n"
-    "   dec %[bitcnt]\n"
-    "   brne 1b\n"
-    :
-    :
-      [bitcnt] "d" (10),
-      [ch] "r" (ch),
-      [uartPort] "I" (_SFR_IO_ADDR(UART_PORT)),
-      [uartBit] "I" (UART_TX_BIT)
-    :
-      "r25"
-  );
-#endif
-}
-
-uint8_t getch(void) {
-  uint8_t ch;
-
-#ifdef LED_DATA_FLASH
-#ifdef __AVR_ATmega8__
-  LED_PORT ^= _BV(LED);
-#else
-  LED_PIN |= _BV(LED);
-#endif
-#endif
-
-#ifdef SOFT_UART
-  __asm__ __volatile__ (
-    "1: sbic  %[uartPin],%[uartBit]\n"  // Wait for start edge
-    "   rjmp  1b\n"
-    "   rcall uartDelay\n"          // Get to middle of start bit
-    "2: rcall uartDelay\n"              // Wait 1 bit period
-    "   rcall uartDelay\n"              // Wait 1 bit period
-    "   clc\n"
-    "   sbic  %[uartPin],%[uartBit]\n"
-    "   sec\n"
-    "   dec   %[bitCnt]\n"
-    "   breq  3f\n"
-    "   ror   %[ch]\n"
-    "   rjmp  2b\n"
-    "3:\n"
-    :
-      [ch] "=r" (ch)
-    :
-      [bitCnt] "d" (9),
-      [uartPin] "I" (_SFR_IO_ADDR(UART_PIN)),
-      [uartBit] "I" (UART_RX_BIT)
-    :
-      "r25"
-);
-#else
-  while(!(UCSR0A & _BV(RXC0)))
-    ;
-  if (!(UCSR0A & _BV(FE0))) {
-      /*
-       * A Framing Error indicates (probably) that something is talking
-       * to us at the wrong bit rate.  Assume that this is because it
-       * expects to be talking to the application, and DON'T reset the
-       * watchdog.  This should cause the bootloader to abort and run
-       * the application "soon", if it keeps happening.  (Note that we
-       * don't care that an invalid char is returned...)
-       */
-    watchdogReset();
-  }
-  
-  ch = UDR0;
-#endif
-
-#ifdef LED_DATA_FLASH
-#ifdef __AVR_ATmega8__
-  LED_PORT ^= _BV(LED);
-#else
-  LED_PIN |= _BV(LED);
-#endif
-#endif
-
-  return ch;
-}
-
-#ifdef SOFT_UART
-// AVR350 equation: #define UART_B_VALUE (((F_CPU/BAUD_RATE)-23)/6)
-// Adding 3 to numerator simulates nearest rounding for more accurate baud rates
-#define UART_B_VALUE (((F_CPU/BAUD_RATE)-20)/6)
-#if UART_B_VALUE > 255
-#error Baud rate too slow for soft UART
-#endif
-
-void uartDelay() {
-  __asm__ __volatile__ (
-    "ldi r25,%[count]\n"
-    "1:dec r25\n"
-    "brne 1b\n"
-    "ret\n"
-    ::[count] "M" (UART_B_VALUE)
-  );
-}
-#endif
-
-void getNch(uint8_t count) {
-  do getch(); while (--count);
-  verifySpace();
-}
-
-void verifySpace() {
-  if (getch() != CRC_EOP) {
-    watchdogConfig(WATCHDOG_16MS);    // shorten WD timeout
-    while (1)			      // and busy-loop so that WD causes
-      ;				      //  a reset and app start.
-  }
-  putch(STK_INSYNC);
-}
-
-#if LED_START_FLASHES > 0
-void flash_led(uint8_t count) {
-  do {
-    TCNT1 = -(F_CPU/(1024*16));
-    TIFR1 = _BV(TOV1);
-    while(!(TIFR1 & _BV(TOV1)));
-#ifdef __AVR_ATmega8__
-    LED_PORT ^= _BV(LED);
-#else
-    LED_PIN |= _BV(LED);
-#endif
-    watchdogReset();
-  } while (--count);
-}
-#endif
-
-// Watchdog functions. These are only safe with interrupts turned off.
-void watchdogReset() {
-  __asm__ __volatile__ (
-    "wdr\n"
-  );
-}
-
-void watchdogConfig(uint8_t x) {
-  WDTCSR = _BV(WDCE) | _BV(WDE);
-  WDTCSR = x;
-}
-
-void appStart() {
-  watchdogConfig(WATCHDOG_OFF);
-  __asm__ __volatile__ (
-#ifdef VIRTUAL_BOOT_PARTITION
-    // Jump to WDT vector
-    "ldi r30,4\n"
-    "clr r31\n"
-#else
-    // Jump to RST vector
-    "clr r30\n"
-    "clr r31\n"
-#endif
-    "ijmp\n"
-  );
-}