Remove non-USB boards

Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around.

5 files changed, 0 insertions, 727 deletions

diff --git a/bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex b/bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex
deleted file mode 100644
index 6190d48..0000000
--- a/bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex
+++ /dev/null
@@ -1,66 +0,0 @@
-:101C000012C02BC02AC029C028C027C026C025C0AA

-:101C100024C023C022C021C020C01FC01EC01DC0C0

-:101C20001CC01BC01AC011241FBECFE5D4E0DEBF0C

-:101C3000CDBF10E0A0E6B0E0E8EEFFE102C0059005

-:101C40000D92A236B107D9F711E0A2E6B0E001C0CB

-:101C50001D92AA36B107E1F74FC0D2CFEF92FF92A3

-:101C60000F931F93EE24FF24870113C00894E11CF7

-:101C7000F11C011D111D81E0E81682E1F8068AE7DA

-:101C8000080780E0180728F0E0916200F0916300F7

-:101C900009955F9BEBCF8CB1992787FD90951F919C

-:101CA0000F91FF90EF9008955D9BFECF8CB9089542

-:101CB000D5DF803221F484E1F7DF80E1F5DF08959C

-:101CC0001F93182FCBDF803231F484E1EDDF812FB9

-:101CD000EBDF80E1E9DF1F9108951F93CF93DF933E

-:101CE000182FC0E0D0E002C0B9DF2196C117E0F3A1

-:101CF000DF91CF911F910895CFE5D4E0DEBFCDBF36

-:101D0000000010BC83E389B988E18AB986E880BD08

-:101D1000BD9A1092680130E2E0E0F0E02FE088B375

-:101D2000832788BBCF010197F1F7215027FFF7CF19

-:101D300020E12093680192DF803381F1813399F4AF

-:101D40008DDF8032C1F784E1AFDF81E4ADDF86E56E

-:101D5000ABDF82E5A9DF80E2A7DF89E4A5DF83E5C9

-:101D6000A3DF80E5C7C0803429F478DF8638B0F07F

-:101D700075DF14C0813471F471DF803811F482E0B2

-:101D80001DC1813811F481E019C1823809F015C1F3

-:101D900082E114C1823421F484E19FDF89DFCBCF5B

-:101DA000853411F485E0F9CF8035C1F38135B1F385

-:101DB0008235A1F3853539F451DF809364004EDF1D

-:101DC00080936500EBCF863519F484E086DFF5C09B

-:101DD000843609F093C042DF809367013FDF809330

-:101DE0006601809169018E7F8093690137DF8534B8

-:101DF00029F480916901816080936901C0E0D0E09D

-:101E000006E610E005C02ADFF80181938F012196D4

-:101E10008091660190916701C817D907A0F31EDF72

-:101E2000803209F088CF8091690180FF1FC020E0D7

-:101E300030E0E6E6F0E012C0A0916400B0916500E9

-:101E40008191082EC5D08091640090916500019623

-:101E500090936500809364002F5F3F4F80916601EF

-:101E6000909167012817390738F343C0F894E19936

-:101E7000FECF1127E0916400F0916500EE0FFF1F87

-:101E8000C6E6D0E0809166019091670180FF01C0B5

-:101E90000196103051F422D003E000935700E895EA

-:101EA0001DD001E100935700E8950990199016D0D4

-:101EB00001E000935700E8951395103258F0112770

-:101EC0000DD005E000935700E89508D001E100939C

-:101ED0005700E8953296029739F0DBCF0091570012

-:101EE00001700130D9F30895103011F00296E7CF58

-:101EF000112484E1D9DE80E1D7DE1DCF843709F0DB

-:101F00004BC0ACDE80936701A9DE80936601A6DE3C

-:101F100090916901853421F49160909369010DC01D

-:101F20009E7F909369018091640090916500880F75

-:101F3000991F909365008093640090DE803209F0D1

-:101F4000FACE84E1B1DEC0E0D0E01EC0809169012C

-:101F500080FF07C0A0916400B091650031D0802D52

-:101F600008C081FD07C0E0916400F0916500E49134

-:101F70008E2F9ADE80916400909165000196909377

-:101F800065008093640021968091660190916701BD

-:101F9000C817D907D8F2AFCF853761F45FDE80323A

-:101FA00009F0C9CE84E180DE8EE17EDE83E97CDE4D

-:101FB00087E0A0CF863709F0BECE80E081DEBBCEC1

-:101FC000E199FECFBFBBAEBBE09A11960DB208956A

-:101FD000E199FECFBFBBAEBB0DBA11960FB6F89418

-:081FE000E29AE19A0FBE089598

-:021FE800800077

-:0400000300001C00DD

-:00000001FF

diff --git a/bootloaders/atmega8/ATmegaBOOT.c b/bootloaders/atmega8/ATmegaBOOT.c
deleted file mode 100644
index 8c8d22a..0000000
--- a/bootloaders/atmega8/ATmegaBOOT.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/**********************************************************/
-/* Serial Bootloader for Atmel mega8 AVR Controller       */
-/*                                                        */
-/* ATmegaBOOT.c                                           */
-/*                                                        */
-/* Copyright (c) 2003, Jason P. Kyle                      */
-/*                                                        */
-/* Hacked by DojoCorp - ZGZ - MMX - IVR                   */
-/* Hacked by David A. Mellis                              */
-/*                                                        */
-/* This program is free software; you can redistribute it */
-/* and/or modify it under the terms of the GNU General    */
-/* Public License as published by the Free Software       */
-/* Foundation; either version 2 of the License, or        */
-/* (at your option) any later version.                    */
-/*                                                        */
-/* This program is distributed in the hope that it will   */
-/* be useful, but WITHOUT ANY WARRANTY; without even the  */
-/* implied warranty of MERCHANTABILITY or FITNESS FOR A   */
-/* PARTICULAR PURPOSE.  See the GNU General Public        */
-/* License for more details.                              */
-/*                                                        */
-/* You should have received a copy of the GNU General     */
-/* Public License along with this program; if not, write  */
-/* to the Free Software Foundation, Inc.,                 */
-/* 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA */
-/*                                                        */
-/* Licence can be viewed at                               */
-/* http://www.fsf.org/licenses/gpl.txt                    */
-/*                                                        */
-/* Target = Atmel AVR m8                                  */
-/**********************************************************/
-
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <avr/eeprom.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-
-//#define F_CPU			16000000
-
-/* We, Malmoitians, like slow interaction
- * therefore the slow baud rate ;-)
- */
-//#define BAUD_RATE		9600
-
-/* 6.000.000 is more or less 8 seconds at the
- * speed configured here
- */
-//#define MAX_TIME_COUNT	6000000
-#define MAX_TIME_COUNT (F_CPU>>1)
-///#define MAX_TIME_COUNT_MORATORY	1600000
-
-/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */
-#define HW_VER	 0x02
-#define SW_MAJOR 0x01
-#define SW_MINOR 0x12
-
-// AVR-GCC compiler compatibility
-// avr-gcc compiler v3.1.x and older doesn't support outb() and inb()
-//      if necessary, convert outb and inb to outp and inp
-#ifndef outb
-	#define outb(sfr,val)  (_SFR_BYTE(sfr) = (val))
-#endif
-#ifndef inb
-	#define inb(sfr) _SFR_BYTE(sfr)
-#endif
-
-/* defines for future compatibility */
-#ifndef cbi
-	#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#endif
-#ifndef sbi
-	#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
-/* Adjust to suit whatever pin your hardware uses to enter the bootloader */
-#define eeprom_rb(addr)   eeprom_read_byte ((uint8_t *)(addr))
-#define eeprom_rw(addr)   eeprom_read_word ((uint16_t *)(addr))
-#define eeprom_wb(addr, val)   eeprom_write_byte ((uint8_t *)(addr), (uint8_t)(val))
-
-/* Onboard LED is connected to pin PB5 */
-#define LED_DDR  DDRB
-#define LED_PORT PORTB
-#define LED_PIN  PINB
-#define LED      PINB5
-
-
-#define SIG1	0x1E	// Yep, Atmel is the only manufacturer of AVR micros.  Single source :(
-#define SIG2	0x93
-#define SIG3	0x07
-#define PAGE_SIZE	0x20U	//32 words
-
-
-void putch(char);
-char getch(void);
-void getNch(uint8_t);
-void byte_response(uint8_t);
-void nothing_response(void);
-
-union address_union {
-  uint16_t word;
-  uint8_t  byte[2];
-} address;
-
-union length_union {
-  uint16_t word;
-  uint8_t  byte[2];
-} length;
-
-struct flags_struct {
-  unsigned eeprom : 1;
-  unsigned rampz  : 1;
-} flags;
-
-uint8_t buff[256];
-//uint8_t address_high;
-
-uint8_t pagesz=0x80;
-
-uint8_t i;
-//uint8_t bootuart0=0,bootuart1=0;
-
-
-void (*app_start)(void) = 0x0000;
-
-int main(void)
-{
-  uint8_t ch,ch2;
-  uint16_t w;
-
-  //cbi(BL_DDR,BL);
-  //sbi(BL_PORT,BL);
-
-  asm volatile("nop\n\t");
-
-  /* check if flash is programmed already, if not start bootloader anyway */
-  //if(pgm_read_byte_near(0x0000) != 0xFF) {
-
-    /* check if bootloader pin is set low */
-    //if(bit_is_set(BL_PIN,BL)) app_start();
-  //}
-
-  /* initialize UART(s) depending on CPU defined */
-  /* m8 */
-  UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; 	// set baud rate
-  UBRRL = (((F_CPU/BAUD_RATE)/16)-1);
-  UCSRB = (1<<RXEN)|(1<<TXEN);  // enable Rx & Tx
-  UCSRC = (1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0);  // config USART; 8N1
-
-  //UBRRL = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
-  //UBRRH = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
-  //UCSRA = 0x00;
-  //UCSRC = 0x86;
-  //UCSRB = _BV(TXEN)|_BV(RXEN);
-
-
-  /* this was giving uisp problems, so I removed it; without it, the boot
-     works on with uisp and avrdude on the mac (at least). */
-  //putch('\0');
-
-  //uint32_t l;
-  //uint32_t time_count;
-  //time_count=0;
-
-  /* set LED pin as output */
-  sbi(LED_DDR,LED);
-	for (i = 0; i < 16; i++) {
-		outb(LED_PORT, inb(LED_PORT) ^ _BV(LED));
-		_delay_loop_2(0);
-	}
-	
-	//for (l=0; l<40000000; l++)
-		//outb(LED_PORT, inb(LED_PORT) ^= _BV(LED));
-
-  /* flash onboard LED three times to signal entering of bootloader */
-  //for(i=0; i<3; ++i) {
-    //for(l=0; l<40000000; ++l);
-    //sbi(LED_PORT,LED);
-    //for(l=0; l<40000000; ++l);
-    //cbi(LED_PORT,LED);
-  //}
-
- /* see comment at previous call to putch() */
- //putch('\0'); // this line is needed for the synchronization of the programmer
-
-  /* forever */
-  for (;;) {
-    //if((inb(UCSRA) & _BV(RXC))){
-    /* get character from UART */
-		ch = getch();
-		
-		/* A bunch of if...else if... gives smaller code than switch...case ! */
-	
-		/* Hello is anyone home ? */ 
-		if(ch=='0') {
-		  nothing_response();
-		}
-	
-		/* Request programmer ID */
-		/* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry  */
-		/* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares.  */
-		else if(ch=='1') {
-			if (getch() == ' ') {
-				putch(0x14);
-				putch('A');
-				putch('V');
-				putch('R');
-				putch(' ');
-				putch('I');
-				putch('S');
-				putch('P');
-				putch(0x10);
-		  }
-		}
-	
-		/* AVR ISP/STK500 board commands  DON'T CARE so default nothing_response */
-		else if(ch=='@') {
-		  ch2 = getch();
-		  if (ch2>0x85) getch();
-		  nothing_response();
-		}
-	
-		/* AVR ISP/STK500 board requests */
-		else if(ch=='A') {
-		  ch2 = getch();
-		  if(ch2==0x80) byte_response(HW_VER);		// Hardware version
-		  else if(ch2==0x81) byte_response(SW_MAJOR);	// Software major version
-		  else if(ch2==0x82) byte_response(SW_MINOR);	// Software minor version
-		  //else if(ch2==0x98) byte_response(0x03);		// Unknown but seems to be required by avr studio 3.56
-		  else byte_response(0x00);				// Covers various unnecessary responses we don't care about
-		}
-	
-		/* Device Parameters  DON'T CARE, DEVICE IS FIXED  */
-		else if(ch=='B') {
-		  getNch(20);
-		  nothing_response();
-		}
-	
-		/* Parallel programming stuff  DON'T CARE  */
-		else if(ch=='E') {
-		  getNch(5);
-		  nothing_response();
-		}
-	
-		/* Enter programming mode  */
-		else if(ch=='P') {
-		  nothing_response();
-		  // FIXME: modified only here by DojoCorp, Mumbai, India, 20050626
-		  //time_count=0; // exted the delay once entered prog.mode
-		}
-	
-		/* Leave programming mode  */
-		else if(ch=='Q') {
-		  nothing_response();
-		  //time_count=MAX_TIME_COUNT_MORATORY; 	// once the programming is done, 
-												// we should start the application
-												// but uisp has problems with this,
-												// therefore we just change the times
-												// and give the programmer 1 sec to react
-		}
-	
-		/* Erase device, don't care as we will erase one page at a time anyway.  */
-		else if(ch=='R') {
-		  nothing_response();
-		}
-	
-		/* Set address, little endian. EEPROM in bytes, FLASH in words  */
-		/* Perhaps extra address bytes may be added in future to support > 128kB FLASH.  */
-		/* This might explain why little endian was used here, big endian used everywhere else.  */
-		else if(ch=='U') {
-		  address.byte[0] = getch();
-		  address.byte[1] = getch();
-		  nothing_response();
-		}
-	
-		/* Universal SPI programming command, disabled.  Would be used for fuses and lock bits.  */
-		else if(ch=='V') {
-		  getNch(4);
-		  byte_response(0x00);
-		}
-	
-		/* Write memory, length is big endian and is in bytes  */
-		else if(ch=='d') {
-		  length.byte[1] = getch();
-		  length.byte[0] = getch();
-		  flags.eeprom = 0;
-		  if (getch() == 'E') flags.eeprom = 1;
-		  for (w=0;w<length.word;w++) {
-		    buff[w] = getch();	                        // Store data in buffer, can't keep up with serial data stream whilst programming pages
-		  }
-		  if (getch() == ' ') {
-				if (flags.eeprom) {		                //Write to EEPROM one byte at a time
-					for(w=0;w<length.word;w++) {
-						eeprom_wb(address.word,buff[w]);
-						address.word++;
-					}			
-				} else {					        //Write to FLASH one page at a time
-					//if (address.byte[1]>127) address_high = 0x01;	//Only possible with m128, m256 will need 3rd address byte. FIXME
-					//else address_high = 0x00;
-			
-					//address.word = address.word << 1;	        //address * 2 -> byte location
-					//if ((length.byte[0] & 0x01)) length.word++;	//Even up an odd number of bytes
-					cli();					//Disable interrupts, just to be sure
-					while(bit_is_set(EECR,EEWE));			//Wait for previous EEPROM writes to complete
-					asm volatile(
-							 "clr	r17		\n\t"	//page_word_count
-							 "lds	r30,address	\n\t"	//Address of FLASH location (in words)
-							 "lds	r31,address+1	\n\t"
-							 "lsl r30				\n\t"  //address * 2 -> byte location
-							 "rol r31				\n\t" 
-							 "ldi	r28,lo8(buff)	\n\t"	//Start of buffer array in RAM
-							 "ldi	r29,hi8(buff)	\n\t"
-							 "lds	r24,length	\n\t"	//Length of data to be written (in bytes)
-							 "lds	r25,length+1	\n\t"
-							 "sbrs r24,0		\n\t"  //Even up an odd number of bytes
-							 "rjmp length_loop		\n\t"
-							 "adiw r24,1		\n\t"
-							 "length_loop:		\n\t"	//Main loop, repeat for number of words in block							 							 
-							 "cpi	r17,0x00	\n\t"	//If page_word_count=0 then erase page
-							 "brne	no_page_erase	\n\t"						 
-							 "rcall  wait_spm		\n\t"
-//							 "wait_spm1:		\n\t"
-//							 "lds	r16,%0		\n\t"	//Wait for previous spm to complete
-//							 "andi	r16,1           \n\t"
-//							 "cpi	r16,1           \n\t"
-//							 "breq	wait_spm1       \n\t"
-							 "ldi	r16,0x03	\n\t"	//Erase page pointed to by Z
-							 "sts	%0,r16		\n\t"
-							 "spm			\n\t"							 
-							 "rcall  wait_spm		\n\t"
-//							 "wait_spm2:		\n\t"
-//							 "lds	r16,%0		\n\t"	//Wait for previous spm to complete
-//							 "andi	r16,1           \n\t"
-//							 "cpi	r16,1           \n\t"
-//							 "breq	wait_spm2       \n\t"									 
-							 "ldi	r16,0x11	\n\t"	//Re-enable RWW section
-							 "sts	%0,r16		\n\t"						 			 
-							 "spm			\n\t"
-							 "no_page_erase:		\n\t"							 
-							 "ld	r0,Y+		\n\t"	//Write 2 bytes into page buffer
-							 "ld	r1,Y+		\n\t"							 
-										 
-							 "rcall  wait_spm		\n\t"
-//							 "wait_spm3:		\n\t"
-//							 "lds	r16,%0		\n\t"	//Wait for previous spm to complete
-//							 "andi	r16,1           \n\t"
-//							 "cpi	r16,1           \n\t"
-//							 "breq	wait_spm3       \n\t"
-							 "ldi	r16,0x01	\n\t"	//Load r0,r1 into FLASH page buffer
-							 "sts	%0,r16		\n\t"
-							 "spm			\n\t"
-										 
-							 "inc	r17		\n\t"	//page_word_count++
-							 "cpi r17,%1	        \n\t"
-							 "brlo	same_page	\n\t"	//Still same page in FLASH
-							 "write_page:		\n\t"
-							 "clr	r17		\n\t"	//New page, write current one first
-							 "rcall  wait_spm		\n\t"
-//							 "wait_spm4:		\n\t"
-//							 "lds	r16,%0		\n\t"	//Wait for previous spm to complete
-//							 "andi	r16,1           \n\t"
-//							 "cpi	r16,1           \n\t"
-//							 "breq	wait_spm4       \n\t"
-							 "ldi	r16,0x05	\n\t"	//Write page pointed to by Z
-							 "sts	%0,r16		\n\t"
-							 "spm			\n\t"
-							 "rcall  wait_spm		\n\t"
-//							 "wait_spm5:		\n\t"
-//							 "lds	r16,%0		\n\t"	//Wait for previous spm to complete
-//							 "andi	r16,1           \n\t"
-//							 "cpi	r16,1           \n\t"
-//							 "breq	wait_spm5       \n\t"									 
-							 "ldi	r16,0x11	\n\t"	//Re-enable RWW section
-							 "sts	%0,r16		\n\t"						 			 
-							 "spm			\n\t"					 		 
-							 "same_page:		\n\t"							 
-							 "adiw	r30,2		\n\t"	//Next word in FLASH
-							 "sbiw	r24,2		\n\t"	//length-2
-							 "breq	final_write	\n\t"	//Finished
-							 "rjmp	length_loop	\n\t"
-							 
-							 "wait_spm:  \n\t"
-							 "lds	r16,%0		\n\t"	//Wait for previous spm to complete
-							 "andi	r16,1           \n\t"
-							 "cpi	r16,1           \n\t"
-							 "breq	wait_spm       \n\t"
-							 "ret			\n\t"
-							 
-							 "final_write:		\n\t"
-							 "cpi	r17,0		\n\t"
-							 "breq	block_done	\n\t"
-							 "adiw	r24,2		\n\t"	//length+2, fool above check on length after short page write
-							 "rjmp	write_page	\n\t"
-							 "block_done:		\n\t"
-							 "clr	__zero_reg__	\n\t"	//restore zero register
-							 : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31");
-			
-					/* Should really add a wait for RWW section to be enabled, don't actually need it since we never */
-					/* exit the bootloader without a power cycle anyhow */
-				}
-				putch(0x14);
-				putch(0x10);
-			}		
-		}
-	
-		/* Read memory block mode, length is big endian.  */
-		else if(ch=='t') {
-		  length.byte[1] = getch();
-		  length.byte[0] = getch();
-		  if (getch() == 'E') flags.eeprom = 1;
-		  else {
-				flags.eeprom = 0;
-				address.word = address.word << 1;	        // address * 2 -> byte location
-		  }
-		  if (getch() == ' ') {		                // Command terminator
-				putch(0x14);
-				for (w=0;w < length.word;w++) {		        // Can handle odd and even lengths okay
-					if (flags.eeprom) {	                        // Byte access EEPROM read
-						putch(eeprom_rb(address.word));
-						address.word++;
-					} else {	
-						if (!flags.rampz) putch(pgm_read_byte_near(address.word));
-						address.word++;
-					}
-				}
-				putch(0x10);
-		  }
-		}
-	
-		/* Get device signature bytes  */
-		else if(ch=='u') {
-		  if (getch() == ' ') {
-				putch(0x14);
-				putch(SIG1);
-				putch(SIG2);
-				putch(SIG3);
-				putch(0x10);
-		  }
-		}
-	
-		/* Read oscillator calibration byte */
-		else if(ch=='v') {
-		  byte_response(0x00);
-		}
-//    } else {
-//			time_count++;
-//			if (time_count>=MAX_TIME_COUNT) {
-//				app_start();
-//			}
-//		}
-	} /* end of forever loop */
-}
-
-void putch(char ch)
-{
-  /* m8 */
-  while (!(inb(UCSRA) & _BV(UDRE)));
-  outb(UDR,ch);
-}
-
-char getch(void)
-{
-  /* m8 */
-	uint32_t count = 0;
-  while(!(inb(UCSRA) & _BV(RXC))) {
-		/* HACKME:: here is a good place to count times*/
-		count++;
-		if (count > MAX_TIME_COUNT)
-			app_start();
-  }
-  return (inb(UDR));
-}
-
-void getNch(uint8_t count)
-{
-  uint8_t i;
-  for(i=0;i<count;i++) {
-    /* m8 */
-    //while(!(inb(UCSRA) & _BV(RXC)));
-    //inb(UDR);
-		getch(); // need to handle time out
-  }
-}
-
-void byte_response(uint8_t val)
-{
-  if (getch() == ' ') {
-    putch(0x14);
-    putch(val);
-    putch(0x10);
-  }
-}
-
-void nothing_response(void)
-{
-  if (getch() == ' ') {
-    putch(0x14);
-    putch(0x10);
-  }
-}
-
-/* end of file ATmegaBOOT.c */
-
-
-
diff --git a/bootloaders/atmega8/ATmegaBOOT.hex b/bootloaders/atmega8/ATmegaBOOT.hex
deleted file mode 100644
index 9182267..0000000
--- a/bootloaders/atmega8/ATmegaBOOT.hex
+++ /dev/null
@@ -1,62 +0,0 @@
-:101C000012C02CC02BC02AC029C028C027C026C0A3

-:101C100025C024C023C022C021C020C01FC01EC0B8

-:101C20001DC01CC01BC011241FBECFE5D4E0DEBF09

-:101C3000CDBF10E0A0E6B0E0E6EAFFE102C005900B

-:101C40000D92A236B107D9F711E0A2E6B0E001C0CB

-:101C50001D92AA36B107E1F72BD0A3C1D1CF5D9B6E

-:101C6000FECF8CB908955F9BFECF8CB108950F9382

-:101C70001F93082F10E002C0F6DF1F5F1017E0F37C

-:101C80001F910F9108951F93182FEDDF803231F4CB

-:101C900084E1E5DF812FE3DF80E1E1DF1F9108953B

-:101CA000E2DF803221F484E1DADF80E1D8DF0895D9

-:101CB0000F931F93CF93DF93000010BC83E389B988

-:101CC00088E18AB986E880BDBD9A1092680120E05B

-:101CD00030E240E050E007C088B3832788BBCA01E8

-:101CE0000197F1F72F5F2031B8F320936801BBDF34

-:101CF000803381F1813399F4B6DF8032C1F784E11A

-:101D0000AEDF81E4ACDF86E5AADF82E5A8DF80E212

-:101D1000A6DF89E4A4DF83E5A2DF80E523C1803468

-:101D200029F4A1DF8638B0F09EDF14C0813471F44D

-:101D30009ADF803811F482E01DC1813811F481E00E

-:101D400019C1823809F015C182E114C1823421F42D

-:101D500084E18DDFA5DFCBCF853411F485E0F9CFA9

-:101D60008035C1F38135B1F38235A1F3853539F47E

-:101D70007ADF8093640077DF80936500EBCF863550

-:101D800019F484E074DFF5C0843609F090C06BDF8D

-:101D90008093670168DF80936601809169018E7F7F

-:101DA0008093690160DF853429F480916901816045

-:101DB0008093690100E010E007C055DFF801EA599F

-:101DC000FF4F80830F5F1F4F8091660190916701E5

-:101DD0000817190790F347DF803209F088CF809108

-:101DE000690180FF1FC000E010E014C0F801EA594B

-:101DF000FF4F80916400909165006081C5D0809113

-:101E00006400909165000196909365008093640052

-:101E10000F5F1F4F809166019091670108171907A6

-:101E200028F343C0F894E199FECF1127E0916400B4

-:101E3000F0916500EE0FFF1FC6E6D0E080916601CD

-:101E40009091670180FF01C00196103051F422D0BB

-:101E500003E000935700E8951DD001E1009357007F

-:101E6000E8950990199016D001E000935700E89585

-:101E70001395103258F011270DD005E0009357004C

-:101E8000E89508D001E100935700E8953296029753

-:101E900039F0DBCF0091570001700130D9F308957C

-:101EA000103011F00296E7CF112484E15BC0843733

-:101EB00009F04BC0D8DE80936701D5DE80936601C0

-:101EC000D2DE90916901853421F49160909369018B

-:101ED0000DC09E7F90936901809164009091650090

-:101EE000880F991F9093650080936400BCDE803258

-:101EF00009F0FDCE84E1B3DE00E010E01EC0809169

-:101F0000690180FF06C0809164009091650034D023

-:101F100008C081FD07C0E0916400F0916500E49184

-:101F20008E2F9DDE809164009091650001969093C4

-:101F30006500809364000F5F1F4F80916601909150

-:101F4000670108171907D8F20EC0853779F48BDEC0

-:101F5000803209F0CCCE84E182DE8EE180DE83E93E

-:101F60007EDE87E07CDE80E17ADEC1CE863709F056

-:101F7000BECE80E088DEBBCEE199FECF9FBB8EBB9C

-:101F8000E09A99278DB30895262FE199FECF9FBB44

-:101F90008EBB2DBB0FB6F894E29AE19A0FBE019664

-:061FA0000895F894FFCF44

-:021FA6008000B9

-:0400000300001C00DD

-:00000001FF

diff --git a/bootloaders/atmega8/ATmegaBOOT.txt b/bootloaders/atmega8/ATmegaBOOT.txt
deleted file mode 100644
index b0e19b3..0000000
--- a/bootloaders/atmega8/ATmegaBOOT.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Configured with: ../src/configure -v --enable-languages=c,c++ --prefix=/usr/lib --infodir=/usr/share/info --mandir=/usr/share/man --bindir=/usr/bin --libexecdir=/usr/lib --libdir=/usr/lib --enable-shared --with-system-zlib --enable-long-long --enable-nls --without-included-gettext --disable-checking --disable-libssp --build=i686-linux-gnu --host=i686-linux-gnu --target=avr
-Thread model: single
-gcc version 4.3.5 (GCC) 
-
diff --git a/bootloaders/atmega8/Makefile b/bootloaders/atmega8/Makefile
deleted file mode 100644
index 9202b52..0000000
--- a/bootloaders/atmega8/Makefile
+++ /dev/null
@@ -1,88 +0,0 @@
-# Makefile for ATmegaBOOT
-# E.Lins, 2004-10-14
-
-# program name should not be changed...
-PROGRAM    = ATmegaBOOT
-
-PRODUCT=atmega8
-
-# enter the parameters for the UISP isp tool
-ISPPARAMS  = -dprog=stk500 -dserial=$(SERIAL) -dspeed=115200
-
-
-#DIRAVR = /usr/local/avr
-DIRAVRBIN = $(DIRAVR)/bin
-DIRAVRUTILS = $(DIRAVR)/utils/bin
-DIRINC = $(DIRAVR)/include
-DIRLIB = $(DIRAVR)/avr/lib
-
-
-MCU_TARGET = atmega8
-LDSECTION  = --section-start=.text=0x1c00
-FUSE_L     = 0xdf
-FUSE_H     = 0xca
-ISPFUSES   = $(DIRAVRBIN)/uisp -dpart=ATmega8 $(ISPPARAMS) --wr_fuse_l=$(FUSE_L) --wr_fuse_h=$(FUSE_H)
-ISPFLASH   = $(DIRAVRBIN)/uisp -dpart=ATmega8 $(ISPPARAMS) --erase --upload if=$(PROGRAM).hex -v
-
-
-OBJ        = $(PROGRAM).o
-OPTIMIZE   = -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions
-
-DEFS       = -DF_CPU=16000000 -DBAUD_RATE=19200
-LIBS       =
-
-CC         = $(DIRAVRBIN)/avr-gcc
-
-
-# Override is only needed by avr-lib build system.
-
-override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -D$(PRODUCT) $(DEFS) -I$(DIRINC)
-override LDFLAGS       = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
-
-OBJCOPY        = $(DIRAVRBIN)/avr-objcopy
-OBJDUMP        = $(DIRAVRBIN)/avr-objdump
-SIZE           = $(DIRAVRBIN)/avr-size
-
-all: $(PROGRAM).elf lst text asm size
-
-isp: $(PROGRAM).hex
-	$(ISPFUSES)
-	$(ISPFLASH)
-
-$(PROGRAM).elf: $(OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
-
-clean:
-	rm -rf *.s
-	rm -rf *.o *.elf
-	rm -rf *.lst *.map
-
-asm: $(PROGRAM).s
-
-%.s: %.c
-	$(CC) -S $(CFLAGS) -g1 $^
-
-lst:  $(PROGRAM).lst
-
-%.lst: %.elf
-	$(OBJDUMP) -h -S $< > $@
-
-size: $(PROGRAM).hex
-	$(SIZE) $^
-
-# Rules for building the .text rom images
-
-text: hex bin srec
-
-hex:  $(PROGRAM).hex
-bin:  $(PROGRAM).bin
-srec: $(PROGRAM).srec
-
-%.hex: %.elf
-	$(OBJCOPY) -j .text -j .data -O ihex $< $@
-
-%.srec: %.elf
-	$(OBJCOPY) -j .text -j .data -O srec $< $@
-
-%.bin: %.elf
-	$(OBJCOPY) -j .text -j .data -O binary $< $@