Bridge library to the 1.5 format

57 files changed, 0 insertions, 5191 deletions

diff --git a/libraries/Bridge/Bridge.cpp b/libraries/Bridge/Bridge.cpp
deleted file mode 100644
index a3d911f..0000000
--- a/libraries/Bridge/Bridge.cpp
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include "Bridge.h"
-#include <util/crc16.h>
-
-BridgeClass::BridgeClass(Stream &_stream) :
-  index(0), stream(_stream), started(false), max_retries(0) {
-  // Empty
-}
-
-void BridgeClass::begin() {
-  if (started)
-    return;
-  started = true;
-  
-  // Wait for U-boot to finish startup
-  do {
-    dropAll();
-    delay(1000);
-  } while (stream.available()>0);
-
-  while (true) {
-    // Bridge interrupt:
-    // - Ask the bridge to close itself
-    uint8_t quit_cmd[] = {'X','X','X','X','X'};
-    max_retries = 1;
-    transfer(quit_cmd, 5);
-
-    // Bridge startup:
-    // - If the bridge is not running starts it safely
-    stream.print(CTRL_C);
-    delay(250);
-    stream.print(F("\n"));
-    delay(250);
-    stream.print(F("\n"));
-    delay(500);
-    // Wait for OpenWRT message
-    // "Press enter to activate console"
-    stream.print(F("run-bridge\n"));
-    delay(500);
-    dropAll();
-  
-    // Reset the brigde to check if it is running
-    uint8_t cmd[] = {'X','X', '1','0','0'};
-    uint8_t res[1];
-    max_retries = 50;
-    uint16_t l = transfer(cmd, 5, res, 1);
-    if (l == TRANSFER_TIMEOUT) {
-      // Bridge didn't start...
-      // Maybe the board is starting-up?
-
-      // Wait and retry
-      delay(1000);
-      continue;
-    }
-    if (res[0] != 0)
-	  while (true);
-
-    max_retries = 50;
-    return;
-  }
-}
-
-void BridgeClass::put(const char *key, const char *value) {
-  // TODO: do it in a more efficient way
-  String cmd = "D";
-  cmd += key;
-  cmd += "\xFE";
-  cmd += value;
-  transfer((uint8_t*)cmd.c_str(), cmd.length());
-}
-
-unsigned int BridgeClass::get(const char *key, uint8_t *value, unsigned int maxlen) {
-  uint8_t cmd[] = {'d'};
-  unsigned int l = transfer(cmd, 1, (uint8_t *)key, strlen(key), value, maxlen);
-  if (l < maxlen)
-    value[l] = 0; // Zero-terminate string
-  return l;
-}
-
-void BridgeClass::crcUpdate(uint8_t c) {
-  
-  CRC = _crc_ccitt_update(CRC, c);
-  //CRC = CRC ^ c;
-  //CRC = (CRC >> 8) + (CRC << 8);
-}
-
-void BridgeClass::crcReset() {
-  CRC = 0xFFFF;
-}
-
-void BridgeClass::crcWrite() {
-  stream.write((char)(CRC >> 8));
-  stream.write((char)(CRC & 0xFF));
-}
-
-bool BridgeClass::crcCheck(uint16_t _CRC) {
-  return CRC == _CRC;
-}
-
-uint16_t BridgeClass::transfer(const uint8_t *buff1, uint16_t len1,
-                 const uint8_t *buff2, uint16_t len2,
-                 const uint8_t *buff3, uint16_t len3,
-                 uint8_t *rxbuff, uint16_t rxlen)
-{
-  uint16_t len = len1 + len2 + len3;
-  uint8_t retries = 0;
-  for ( ; retries<max_retries; retries++, delay(100), dropAll() /* Delay for retransmission */) {
-    // Send packet
-    crcReset();
-    stream.write((char)0xFF);                // Start of packet (0xFF)
-    crcUpdate(0xFF);
-    stream.write((char)index);               // Message index
-    crcUpdate(index);
-    stream.write((char)((len >> 8) & 0xFF)); // Message length (hi)
-    crcUpdate((len >> 8) & 0xFF);
-    stream.write((char)(len & 0xFF));        // Message length (lo)
-    crcUpdate(len & 0xFF);
-    for (uint16_t i=0; i<len1; i++) {  // Payload
-      stream.write((char)buff1[i]);
-      crcUpdate(buff1[i]);
-    }
-    for (uint16_t i=0; i<len2; i++) {  // Payload
-      stream.write((char)buff2[i]);
-      crcUpdate(buff2[i]);
-    }
-    for (uint16_t i=0; i<len3; i++) {  // Payload
-      stream.write((char)buff3[i]);
-      crcUpdate(buff3[i]);
-    }
-    crcWrite();                     // CRC
-  
-    // Wait for ACK in 100ms
-    if (timedRead(100) != 0xFF)
-      continue;
-    crcReset();
-    crcUpdate(0xFF);
-    
-    // Check packet index
-    if (timedRead(5) != index)
-      continue;
-    crcUpdate(index);
-    
-    // Recv len
-    int lh = timedRead(5);
-    if (lh < 0)
-      continue;
-    crcUpdate(lh);
-    int ll = timedRead(5);
-    if (ll < 0)
-      continue;
-    crcUpdate(ll);
-    uint16_t l = lh;
-    l <<= 8;
-    l += ll;
-
-    // Recv data
-    for (uint16_t i=0; i<l; i++) {
-      int c = timedRead(5);
-      if (c < 0)
-        continue;
-      // Cut received data if rxbuffer is too small
-      if (i < rxlen)
-        rxbuff[i] = c;
-      crcUpdate(c);
-    }
-    
-    // Check CRC
-    int crc_hi = timedRead(5);
-    if (crc_hi < 0)
-      continue;
-    int crc_lo = timedRead(5);
-    if (crc_lo < 0)
-      continue;
-    if (!crcCheck((crc_hi<<8)+crc_lo))
-      continue;
-    
-    // Increase index
-    index++;
-    
-    // Return bytes received
-    if (l > rxlen)
-      return rxlen;
-    return l;
-  }
-
-  // Max retries exceeded
-  return TRANSFER_TIMEOUT;
-}
-
-int BridgeClass::timedRead(unsigned int timeout) {
-  int c;
-  unsigned long _startMillis = millis();
-  do {
-    c = stream.read();
-    if (c >= 0) return c;
-  } while(millis() - _startMillis < timeout);
-  return -1;     // -1 indicates timeout
-}
-
-void BridgeClass::dropAll() {
-  while (stream.available() > 0) {
-    stream.read();
-  }
-}
-
-// Bridge instance
-#ifdef __AVR_ATmega32U4__
-  // Leonardo variants (where HardwareSerial is Serial1)
-  SerialBridgeClass Bridge(Serial1);
-#else
-  SerialBridgeClass Bridge(Serial);
-#endif
diff --git a/libraries/Bridge/Bridge.h b/libraries/Bridge/Bridge.h
deleted file mode 100644
index e4ed9f8..0000000
--- a/libraries/Bridge/Bridge.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef BRIDGE_H_
-#define BRIDGE_H_
-
-#include <Arduino.h>
-#include <Stream.h>
-
-class BridgeClass {
-public:
-  BridgeClass(Stream &_stream);
-  void begin();
-  
-  // Methods to handle key/value datastore
-  void put(const char *key, const char *value);
-  void put(const String &key, const String &value)
-    { put(key.c_str(), value.c_str()); }
-  unsigned int get(const char *key, uint8_t *buff, unsigned int size);
-  unsigned int get(const char *key, char *value, unsigned int maxlen)
-    { get(key, reinterpret_cast<uint8_t *>(value), maxlen); }
-  
-  // Trasnfer a frame (with error correction and response)
-  uint16_t transfer(const uint8_t *buff1, uint16_t len1,
-                   const uint8_t *buff2, uint16_t len2,
-                   const uint8_t *buff3, uint16_t len3,
-                   uint8_t *rxbuff, uint16_t rxlen);
-  // multiple inline versions of the same function to allow efficient frame concatenation
-  uint16_t transfer(const uint8_t *buff1, uint16_t len1)
-  { return transfer(buff1, len1, NULL, 0); }
-  uint16_t transfer(const uint8_t *buff1, uint16_t len1,
-                   uint8_t *rxbuff, uint16_t rxlen)
-  { return transfer(buff1, len1, NULL, 0, rxbuff, rxlen); }
-  uint16_t transfer(const uint8_t *buff1, uint16_t len1,
-                   const uint8_t *buff2, uint16_t len2,
-                   uint8_t *rxbuff, uint16_t rxlen)
-  { return transfer(buff1, len1, buff2, len2, NULL, 0, rxbuff, rxlen); }
-
-  static const int TRANSFER_TIMEOUT = 0xFFFF;
-
-private:
-  uint8_t index;
-  int timedRead(unsigned int timeout);
-  void dropAll();
-  
-private:
-  void crcUpdate(uint8_t c);
-  void crcReset();
-  void crcWrite();
-  bool crcCheck(uint16_t _CRC);
-  uint16_t CRC;
-  
-private:
-  static const char CTRL_C = 3;
-  Stream &stream;
-  bool started;
-  uint8_t max_retries;
-};
-
-// This subclass uses a serial port Stream
-class SerialBridgeClass : public BridgeClass {
-public:
-  SerialBridgeClass(HardwareSerial &_serial)
-      : BridgeClass(_serial), serial(_serial) { 
-    // Empty
-  }
-  
-  void begin() {
-    serial.begin(250000);
-    BridgeClass::begin();
-  }
-  
-private:
-  HardwareSerial &serial;
-};
-
-extern SerialBridgeClass Bridge;
-
-#endif /* BRIDGE_H_ */
-
-#include <Console.h>
-#include <Process.h>
diff --git a/libraries/Bridge/Console.cpp b/libraries/Bridge/Console.cpp
deleted file mode 100644
index 8607421..0000000
--- a/libraries/Bridge/Console.cpp
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include <Console.h>
-
-// Default constructor uses global Bridge instance
-ConsoleClass::ConsoleClass() : 
-  bridge(Bridge), inBuffered(0), inReadPos(0), inBuffer(NULL),
-  autoFlush(true)
-{
-  // Empty
-}
-
-// Constructor with a user provided BridgeClass instance
-ConsoleClass::ConsoleClass(BridgeClass &_b) : 
-  bridge(_b), inBuffered(0), inReadPos(0), inBuffer(NULL),
-  autoFlush(true)
-{
-  // Empty
-}
-
-ConsoleClass::~ConsoleClass() {
-  end();
-}
-
-size_t ConsoleClass::write(uint8_t c) {
-  if (autoFlush) {
-    uint8_t tmp[] = { 'P', c };
-    bridge.transfer(tmp, 2);
-    return 1;
-  } else {
-    outBuffer[outBuffered++] = c;
-    if (outBuffered == outBufferSize)
-      flush();
-  }
-}
-
-size_t ConsoleClass::write(const uint8_t *buff, size_t size) {
-  if (autoFlush) {
-    // TODO: do it in a more efficient way
-    uint8_t *tmp = new uint8_t[size+1];
-    tmp[0] = 'P';
-    memcpy(tmp+1, buff, size);
-    bridge.transfer(tmp, size+1);
-    delete[] tmp;
-    return size;
-  } else {
-    while (size > 0) {
-      outBuffer[outBuffered++] = *buff++;
-      size--;
-      if (outBuffered == outBufferSize)
-        flush();
-    }
-  }
-}
-
-void ConsoleClass::flush() {
-  if (autoFlush)
-    return;
-  
-  bridge.transfer(outBuffer, outBuffered);
-  outBuffered = 1;
-}
-
-void ConsoleClass::noBuffer() {
-  if (autoFlush)
-	return;
-  delete[] outBuffer;
-  autoFlush = true;
-}
-
-void ConsoleClass::buffer(uint8_t size) {
-  noBuffer();
-  if (size==0)
-	return;
-  outBuffer = new uint8_t[size+1];
-  outBuffer[0] = 'P'; // WRITE tag
-  outBufferSize = size+1;
-  outBuffered = 1;
-  autoFlush = false;
-}
-
-bool ConsoleClass::connected() {
-  uint8_t tmp = 'a';
-  bridge.transfer(&tmp, 1, &tmp, 1);
-  return tmp==1;
-}
-
-int ConsoleClass::available() {
-  // Look if there is new data available
-  doBuffer();
-  return inBuffered;
-}
-
-int ConsoleClass::read() {
-  doBuffer();
-  if (inBuffered == 0)
-    return -1; // no chars available
-  else {
-    inBuffered--;
-    return inBuffer[inReadPos++];
-  }
-}
-
-int ConsoleClass::peek() {
-  doBuffer();
-  if (inBuffered == 0)
-    return -1; // no chars available
-  else
-    return inBuffer[inReadPos];
-}
-
-void ConsoleClass::doBuffer() {
-  // If there are already char in buffer exit
-  if (inBuffered > 0)
-    return;
-
-  // Try to buffer up to 32 characters
-  inReadPos = 0;
-  uint8_t tmp[] = { 'p', BUFFER_SIZE };
-  inBuffered = bridge.transfer(tmp, 2, inBuffer, BUFFER_SIZE);
-}
-
-void ConsoleClass::begin() {
-  bridge.begin();
-  end();
-  inBuffer = new uint8_t[BUFFER_SIZE];
-}
-
-void ConsoleClass::end() {
-  noBuffer();
-  if (inBuffer) {
-    delete[] inBuffer;
-    inBuffer = NULL;
-  }
-}
-
-ConsoleClass Console;
diff --git a/libraries/Bridge/Console.h b/libraries/Bridge/Console.h
deleted file mode 100644
index 73a9739..0000000
--- a/libraries/Bridge/Console.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef CONSOLE_H_
-#define CONSOLE_H_
-
-#include <Bridge.h>
-
-class ConsoleClass : public Stream {
-public:
-  // Default constructor uses global Bridge instance
-  ConsoleClass();
-  // Constructor with a user provided BridgeClass instance
-  ConsoleClass(BridgeClass &_b);
-  ~ConsoleClass();
-  
-  void begin();
-  void end();
-
-  void buffer(uint8_t size);
-  void noBuffer();
-
-  bool connected();
-
-  // Stream methods 
-  // (read from console socket)
-  int available();
-  int read();
-  int peek();
-  // (write to console socket)
-  size_t write(uint8_t);
-  size_t write(const uint8_t *buffer, size_t size);
-  void flush();
-  
-  operator bool () { return connected(); }
-  
-private:
-  BridgeClass &bridge;
-
-  void doBuffer();
-  uint8_t inBuffered;
-  uint8_t inReadPos;
-  static const int BUFFER_SIZE = 32;
-  uint8_t *inBuffer;
-  
-  bool autoFlush;
-  uint8_t outBuffered;
-  uint8_t outBufferSize;
-  uint8_t *outBuffer;
-};
-
-extern ConsoleClass Console;
-
-#endif
diff --git a/libraries/Bridge/FileIO.cpp b/libraries/Bridge/FileIO.cpp
deleted file mode 100644
index 83c889e..0000000
--- a/libraries/Bridge/FileIO.cpp
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include <FileIO.h>
-
-
-
-File::File(BridgeClass &b) : mode(255), bridge(b) {
-  // Empty
-}
-
-File::File(const char *_filename, uint8_t _mode, BridgeClass &b) : mode(_mode), bridge(b) {
-  filename = _filename;
-  char modes[] = {'r','w','a'};
-  uint8_t cmd[] = {'F', modes[mode]};
-  uint8_t res[2];
-  dirPosition = 1;
-  bridge.transfer(cmd, 2, (uint8_t*)filename.c_str(), filename.length(), res, 2);
-  if (res[0] != 0) { // res[0] contains error code
-    mode = 255; // In case of error keep the file closed
-    return;
-  }
-  handle = res[1];
-  buffered = 0;
-}
-
-File::operator bool() {
-  return (mode != 255);
-}
-
-File::~File() {
-  close();
-}
-
-size_t File::write(uint8_t c) {
-  return write(&c, 1);
-}
-
-size_t File::write(const uint8_t *buf, size_t size) {
-  if (mode == 255)
-	return -1;
-  uint8_t cmd[] = {'g', handle};
-  uint8_t res[1];
-  bridge.transfer(cmd, 2, buf, size, res, 1);
-  if (res[0] != 0) // res[0] contains error code
-	return -res[0];
-  return size;
-}
-
-int File::read() {
-  doBuffer();
-  if (buffered == 0)
-    return -1; // no chars available
-  else {
-    buffered--;
-    return buffer[readPos++];
-  }
-}
-
-int File::peek() {
-  doBuffer();
-  if (buffered == 0)
-    return -1; // no chars available
-  else
-    return buffer[readPos];
-}
-
-boolean File::seek(uint32_t position) {
-  uint8_t cmd[] = {
-    's',
-    handle,
-    (position >> 24) & 0xFF,
-    (position >> 16) & 0xFF,
-    (position >> 8) & 0xFF,
-    position & 0xFF
-  };
-  uint8_t res[1];
-  bridge.transfer(cmd, 6, res, 1);
-  if (res[0]==0) {
-    // If seek succeed then flush buffers
-    buffered = 0;
-    return true;
-  }
-  return false;
-}
-
-uint32_t File::position() {
-  uint8_t cmd[] = {'S', handle};
-  uint8_t res[5];
-  bridge.transfer(cmd, 2, res, 5);
-  //err = res[0]; // res[0] contains error code
-  uint32_t pos = res[1] << 24;
-  pos += res[2] << 16;
-  pos += res[3] << 8;
-  pos += res[4];
-  return pos - buffered;
-}
-
-void File::doBuffer() {
-  // If there are already char in buffer exit
-  if (buffered > 0)
-    return;
-
-  // Try to buffer up to 32 characters
-  readPos = 0;
-  uint8_t cmd[] = {'G', handle, sizeof(buffer)};
-  buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)) - 1;
-  //err = buff[0]; // First byte is error code
-  if (buffered>0) {
-    // Shift the reminder of buffer
-    for (uint8_t i=0; i<buffered; i++)
-      buffer[i] = buffer[i+1];
-  }
-}
-
-int File::available() {
-  // Look if there is new data available
-  doBuffer();
-  return buffered;
-}
-
-void File::flush() {
-}
-
-//int read(void *buf, uint16_t nbyte)
-
-//uint32_t size()
-
-void File::close() {
-  if (mode == 255)
-    return;
-  uint8_t cmd[] = {'f', handle};
-  bridge.transfer(cmd, 2);
-  mode = 255;
-}
-
-const char *File::name() {
-  return filename.c_str();
-}
-
-
-boolean File::isDirectory() {
-  uint8_t res[1];
-  uint8_t lenght;
-  uint8_t cmd[] = {'i'};
-  if (mode != 255)
-    return 0;
-
-  bridge.transfer(cmd, 1, (uint8_t *)filename.c_str(), filename.length(), res, 1);
-  return res[0];
-}
-
-
-File File::openNextFile(uint8_t mode){
-  Process awk;
-  char tmp;
-  String command;
-  String filepath;
-  if (dirPosition == 0xFFFF) return File();
-
-  command = "ls ";
-  command += filename;
-  command += " | awk 'NR==";
-  command += dirPosition;
-  command += "'";
-  
-  awk.runShellCommand(command);
-
-  while(awk.running()); 
-
-  command = "";
-
-  while (awk.available()){
-    tmp = awk.read();
-    if (tmp!='\n') command += tmp;
-  }
-  if (command.length() == 0)
-    return File();
-  dirPosition++;
-  filepath = filename + "/" + command;
-  return File(filepath.c_str(),mode);
-  
-} 
-
-void File::rewindDirectory(void){
-  dirPosition = 1;
-}
-
-
-
-
-
-
-boolean FileSystemClass::begin() {
-  return true;
-}
-
-File FileSystemClass::open(const char *filename, uint8_t mode) {
-  return File(filename, mode);
-}
-
-boolean FileSystemClass::exists(const char *filepath) {
-  Process ls;
-  ls.begin("ls");
-  ls.addParameter(filepath);
-  int res = ls.run();
-  return (res == 0);
-}
-
-boolean FileSystemClass::mkdir(const char *filepath) {
-  Process mk;
-  mk.begin("mkdir");
-  mk.addParameter("-p");
-  mk.addParameter(filepath);
-  int res = mk.run();
-  return (res == 0);
-}
-
-boolean FileSystemClass::remove(const char *filepath) {
-  Process rm;
-  rm.begin("rm");
-  rm.addParameter(filepath);
-  int res = rm.run();
-  return (res == 0);
-}
-
-boolean FileSystemClass::rmdir(const char *filepath) {
-  Process rm;
-  rm.begin("rmdir");
-  rm.addParameter(filepath);
-  int res = rm.run();
-  return (res == 0);
-}
-
-FileSystemClass FileSystem;
diff --git a/libraries/Bridge/FileIO.h b/libraries/Bridge/FileIO.h
deleted file mode 100644
index 0807287..0000000
--- a/libraries/Bridge/FileIO.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef __FILEIO_H__
-#define __FILEIO_H__
-
-#include <Process.h>
-
-#define FILE_READ 0
-#define FILE_WRITE 1
-#define FILE_APPEND 2
-
-class File : public Stream {
- 
-public:
-  File(BridgeClass &b = Bridge);
-  File(const char *_filename, uint8_t _mode, BridgeClass &b = Bridge);
-  ~File();
-  
-  virtual size_t write(uint8_t);
-  virtual size_t write(const uint8_t *buf, size_t size);
-  virtual int read();
-  virtual int peek();
-  virtual int available();
-  virtual void flush();
-  int read(void *buf, uint16_t nbyte);
-  boolean seek(uint32_t pos);
-  uint32_t position();
-  uint32_t size();
-  void close();
-  operator bool();
-  const char * name();
-  boolean isDirectory();
-  File openNextFile(uint8_t mode = FILE_READ);
-  void rewindDirectory(void);
-  
-  //using Print::write;
-
-private:
-  void doBuffer();
-  uint8_t buffered;
-  uint8_t readPos;
-  uint16_t dirPosition;
-  static const int BUFFER_SIZE = 64;
-  uint8_t buffer[BUFFER_SIZE];
-  
-  
-private:
-  BridgeClass &bridge;
-  String filename;
-  uint8_t mode;
-  uint8_t handle;
-  
-};
-
-class FileSystemClass {
-public:
-  FileSystemClass() : bridge(Bridge) { }
-  FileSystemClass(BridgeClass &_b) : bridge(_b) { }
-  
-  boolean begin();
-  
-  // Open the specified file/directory with the supplied mode (e.g. read or
-  // write, etc). Returns a File object for interacting with the file.
-  // Note that currently only one file can be open at a time.
-  File open(const char *filename, uint8_t mode = FILE_READ);
-
-  // Methods to determine if the requested file path exists.
-  boolean exists(const char *filepath);
-
-  // Create the requested directory heirarchy--if intermediate directories
-  // do not exist they will be created.
-  boolean mkdir(const char *filepath);
-  
-  // Delete the file.
-  boolean remove(const char *filepath);
-  
-  boolean rmdir(const char *filepath);
-
-private:
-  friend class File;
-  
-  BridgeClass &bridge;
-};
-
-extern FileSystemClass FileSystem;
-
-#endif
diff --git a/libraries/Bridge/HttpClient.cpp b/libraries/Bridge/HttpClient.cpp
deleted file mode 100644
index 510af38..0000000
--- a/libraries/Bridge/HttpClient.cpp
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include "HttpClient.h"
-
-unsigned int HttpClient::get(String &url) {
-  begin("curl");
-  addParameter(url);
-  return run();
-}
-
-unsigned int HttpClient::get(const char *url) {
-  begin("curl");
-  addParameter(url);
-  return run();
-}
-
-void HttpClient::getAsynchronously(String &url) {
-  begin("curl");
-  addParameter(url);
-  runAsynchronously();
-}
-
-void HttpClient::getAsynchronously(const char *url) {
-  begin("curl");
-  addParameter(url);
-  runAsynchronously();
-}
-
-boolean HttpClient::ready() {
-  return running();
-}
-
-unsigned int HttpClient::getResult() {
-  return exitValue();
-}
-
-
diff --git a/libraries/Bridge/HttpClient.h b/libraries/Bridge/HttpClient.h
deleted file mode 100644
index 940a66d..0000000
--- a/libraries/Bridge/HttpClient.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef HTTPCLIENT_H_
-#define HTTPCLIENT_H_
-
-#include <Process.h>
-
-class HttpClient : public Process {
-public:
-
-  unsigned int get(String &url);
-  unsigned int get(const char * url);
-  void getAsynchronously(String &url);
-  void getAsynchronously(const char * url);
-  boolean ready();
-  unsigned int getResult();
-
-};
-
-#endif /* HTTPCLIENT_H_ */
diff --git a/libraries/Bridge/Mailbox.cpp b/libraries/Bridge/Mailbox.cpp
deleted file mode 100644
index cf2b9e5..0000000
--- a/libraries/Bridge/Mailbox.cpp
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include <Mailbox.h>
-
-unsigned int MailboxClass::readMessage(uint8_t *buff, unsigned int size) {
-  uint8_t tmp[] = { 'm' };
-  return bridge.transfer(tmp, 1, buff, size);
-}
-
-void MailboxClass::readMessage(String &str, unsigned int maxLength) {
-  uint8_t tmp[] = { 'm' };
-  // XXX: Is there a better way to create the string?
-  uint8_t buff[maxLength+1];
-  int l = bridge.transfer(tmp, 1, buff, maxLength);
-  buff[l] = 0;
-  str = (const char *)buff;
-}
-
-void MailboxClass::writeMessage(const uint8_t *buff, unsigned int size) {
-  uint8_t cmd[] = {'M'};
-  bridge.transfer(cmd, 1, buff, size, NULL, 0);
-}
-
-void MailboxClass::writeMessage(const String& str) {
-  writeMessage((uint8_t*) str.c_str(), str.length());
-}
-
-void MailboxClass::writeJSON(const String& str) {
-  uint8_t cmd[] = {'J'};
-  bridge.transfer(cmd, 1, (uint8_t*) str.c_str(), str.length(), NULL, 0);
-}
-
-unsigned int MailboxClass::messageAvailable() {
-  uint8_t tmp[] = {'n'};
-  uint8_t res[2];
-  bridge.transfer(tmp, 1, res, 2);
-  return (res[0] << 8) + res[1];
-}
-
-MailboxClass Mailbox(Bridge);
diff --git a/libraries/Bridge/Mailbox.h b/libraries/Bridge/Mailbox.h
deleted file mode 100644
index 35bd1d6..0000000
--- a/libraries/Bridge/Mailbox.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef _MAILBOX_CLASS_H_INCLUDED_
-#define _MAILBOX_CLASS_H_INCLUDED_
-
-#include <Bridge.h>
-
-class MailboxClass {
-public:
-  MailboxClass(BridgeClass &b = Bridge) : bridge(b) { }
-
-  void begin() { }
-  void end() { }
-
-  // Receive a message and store it inside a buffer
-  unsigned int readMessage(uint8_t *buffer, unsigned int size);
-  // Receive a message and store it inside a String
-  void readMessage(String &str, unsigned int maxLength=128);
-
-  // Send a message
-  void writeMessage(const uint8_t *buffer, unsigned int size);
-  // Send a message
-  void writeMessage(const String& str);
-  // Send a JSON message
-  void writeJSON(const String& str);
-
-  // Return the size of the next available message, 0 if there are
-  // no messages in queue.
-  unsigned int messageAvailable();
-
-private:
-  BridgeClass &bridge;
-};
-
-extern MailboxClass Mailbox;
-
-#endif // _MAILBOX_CLASS_H_INCLUDED_
diff --git a/libraries/Bridge/Process.cpp b/libraries/Bridge/Process.cpp
deleted file mode 100644
index 219922a..0000000
--- a/libraries/Bridge/Process.cpp
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include <Process.h>
-
-Process::~Process() {
-  close();
-}
-
-size_t Process::write(uint8_t c) {
-  uint8_t cmd[] = {'I', handle, c};
-  bridge.transfer(cmd, 3);
-  return 1;
-}
-
-void Process::flush() {
-}
-
-int Process::available() {
-  // Look if there is new data available
-  doBuffer();
-  return buffered;
-}
-
-int Process::read() {
-  doBuffer();
-  if (buffered == 0)
-    return -1; // no chars available
-  else {
-    buffered--;
-    return buffer[readPos++];
-  }
-}
-
-int Process::peek() {
-  doBuffer();
-  if (buffered == 0)
-    return -1; // no chars available
-  else
-    return buffer[readPos];
-}
-
-void Process::doBuffer() {
-  // If there are already char in buffer exit
-  if (buffered > 0)
-    return;
-
-  // Try to buffer up to 32 characters
-  readPos = 0;
-  uint8_t cmd[] = {'O', handle, sizeof(buffer)};
-  buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer));
-}
-
-void Process::begin(const String &command) {
-  close();
-  cmdline = new String(command);
-}
-
-void Process::addParameter(const String &param) {
-  *cmdline += "\xFE";
-  *cmdline += param;
-}
-
-void Process::runAsynchronously() {
-  uint8_t cmd[] = {'R'};
-  uint8_t res[2];
-  bridge.transfer(cmd, 1, (uint8_t*)cmdline->c_str(), cmdline->length(), res, 2);
-  handle = res[1];
-
-  delete cmdline;
-  cmdline = NULL;
-  
-  if (res[0]==0) // res[0] contains error code
-    started = true;
-}
-
-boolean Process::running() {
-  uint8_t cmd[] = {'r', handle};
-  uint8_t res[1];
-  bridge.transfer(cmd, 2, res, 1);
-  return (res[0] == 1);
-}
-
-unsigned int Process::exitValue() {
-  uint8_t cmd[] = {'W', handle};
-  uint8_t res[2];
-  bridge.transfer(cmd, 2, res, 2);
-  return (res[0] << 8) + res[1];
-}
-
-unsigned int Process::run() {
-  runAsynchronously();
-  while (running())
-    delay(100);
-  return exitValue();
-}
-
-void Process::close() {
-  if (started) {
-    uint8_t cmd[] = {'w', handle};
-    bridge.transfer(cmd, 2);
-  }
-  started = false;
-}
-
-unsigned int Process::runShellCommand(const String &command) {
-  runShellCommandAsynchronously(command);
-  while (running())
-    delay(100);
-  return exitValue();
-}
-
-void Process::runShellCommandAsynchronously(const String &command) {
-  begin("/bin/ash");
-  addParameter("-c");
-  addParameter(command);
-  runAsynchronously();
-}
-
-// This method is currently unused
-//static unsigned int __commandOutputAvailable(uint8_t handle) {
-//  uint8_t cmd[] = {'o', handle};
-//  uint8_t res[1];
-//  Bridge.transfer(cmd, 2, res, 1);
-//  return res[0];
-//}
-
diff --git a/libraries/Bridge/Process.h b/libraries/Bridge/Process.h
deleted file mode 100644
index cacf516..0000000
--- a/libraries/Bridge/Process.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef PROCESS_H_
-#define PROCESS_H_
-
-#include <Bridge.h>
-
-class Process : public Stream {
-public:
-  // Constructor with a user provided BridgeClass instance
-  Process(BridgeClass &_b = Bridge) :
-	  bridge(_b), started(false), buffered(0), readPos(0) { }
-  ~Process();
-  
-  void begin(const String &command);
-  void addParameter(const String &param);
-  unsigned int run();
-  void runAsynchronously();
-  boolean running();
-  unsigned int exitValue();
-  void close();
-
-  unsigned int runShellCommand(const String &command);
-  void runShellCommandAsynchronously(const String &command);
-
-  operator bool () { return started; }
-
-  // Stream methods 
-  // (read from process stdout)
-  int available();
-  int read();
-  int peek();
-  // (write to process stdin)
-  size_t write(uint8_t);
-  void flush();
-  // TODO: add optimized function for block write
-  
-private:
-  BridgeClass &bridge;
-  unsigned int handle;
-  String *cmdline;
-  boolean started;
-
-private:
-  void doBuffer();
-  uint8_t buffered;
-  uint8_t readPos;
-  static const int BUFFER_SIZE = 64;
-  uint8_t buffer[BUFFER_SIZE];
-  
-};
-
-#endif
diff --git a/libraries/Bridge/YunClient.cpp b/libraries/Bridge/YunClient.cpp
deleted file mode 100644
index aaaf907..0000000
--- a/libraries/Bridge/YunClient.cpp
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include <YunClient.h>
-
-YunClient::YunClient(int _h, BridgeClass &_b) :
-  bridge(_b), handle(_h), opened(true), buffered(0) {
-}
-
-YunClient::YunClient(BridgeClass &_b) :
-  bridge(_b), handle(0), opened(false), buffered(0) {
-}
-
-YunClient::~YunClient() {
-}
-
-YunClient& YunClient::operator=(const YunClient &_x) {
-	opened = _x.opened;
-	handle = _x.handle;
-	return *this;
-}
-
-void YunClient::stop() {
-  if (opened) {
-    uint8_t cmd[] = {'j', handle};
-    bridge.transfer(cmd, 2);
-  }
-  opened = false;
-}
-
-void YunClient::doBuffer() {
-  // If there are already char in buffer exit
-  if (buffered > 0)
-    return;
-
-  // Try to buffer up to 32 characters
-  readPos = 0;
-  uint8_t cmd[] = {'K', handle, sizeof(buffer)};
-  buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer));
-}
-
-int YunClient::available() {
-  // Look if there is new data available
-  doBuffer();
-  return buffered;
-}
-
-int YunClient::read() {
-  doBuffer();
-  if (buffered == 0)
-    return -1; // no chars available
-  else {
-    buffered--;
-    return buffer[readPos++];
-  }
-}
-
-int YunClient::read(uint8_t *buff, size_t size) {
-  int readed = 0;
-  do {
-	if (buffered == 0) {
-	  doBuffer();
-      if (buffered == 0)
-        return readed;
-	}
-	buff[readed++] = buffer[readPos++];
-	buffered--;
-  } while (readed < size);
-  return readed;
-}
-
-int YunClient::peek() {
-  doBuffer();
-  if (buffered == 0)
-    return -1; // no chars available
-  else
-    return buffer[readPos];
-}
-
-size_t YunClient::write(uint8_t c) {
-  if (!opened)
-    return 0;
-  uint8_t cmd[] = {'l', handle, c};
-  bridge.transfer(cmd, 3);
-  return 1;
-}
-
-size_t YunClient::write(const uint8_t *buf, size_t size) {
-  if (!opened)
-    return 0;
-  uint8_t cmd[] = {'l', handle};
-  bridge.transfer(cmd, 2, buf, size, NULL, 0);
-  return size;
-}
-
-void YunClient::flush() {
-}
-
-uint8_t YunClient::connected() {
-  if (!opened)
-    return false;
-  uint8_t cmd[] = {'L', handle};
-  uint8_t res[1];
-  bridge.transfer(cmd, 2, res, 1);
-  return (res[0] == 1);
-}
-
-int YunClient::connect(IPAddress ip, uint16_t port) {
-  String address;
-  address.reserve(18);
-  address += ip[0];
-  address += '.';
-  address += ip[1];
-  address += '.';
-  address += ip[2];
-  address += '.';
-  address += ip[3];
-  return connect(address.c_str(), port);
-}
-
-int YunClient::connect(const char *host, uint16_t port) {
-  uint8_t tmp[] = {
-    'C',
-    (port >> 8) & 0xFF,
-    port & 0xFF
-  };
-  uint8_t res[1];
-  int l = bridge.transfer(tmp, 3, (const uint8_t *)host, strlen(host), res, 1);
-  if (l==0)
-    return 0;
-  handle = res[0];
-
-  // wait for connection
-  uint8_t tmp2[] = { 'c', handle };
-  uint8_t res2[1];
-  while (true) {
-    bridge.transfer(tmp2, 2, res2, 1);
-    if (res2[0] == 0)
-      break;
-    delay(1);
-  }
-  opened = true;
-
-  // check for successful connection
-  if (connected())
-    return 1;
-
-  opened = false;
-  handle = 0;
-  return 0;
-}
-
diff --git a/libraries/Bridge/YunClient.h b/libraries/Bridge/YunClient.h
deleted file mode 100644
index 59e3a0c..0000000
--- a/libraries/Bridge/YunClient.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef _YUN_CLIENT_H_
-#define _YUN_CLIENT_H_
-
-#include <Bridge.h>
-#include <Client.h>
-
-class YunClient : public Client {
-public:
-  // Constructor with a user provided BridgeClass instance
-  YunClient(int _h, BridgeClass &_b = Bridge);
-  YunClient(BridgeClass &_b = Bridge);
-  ~YunClient();
-  
-  // Stream methods 
-  // (read message)
-  virtual int available();
-  virtual int read();
-  virtual int read(uint8_t *buf, size_t size);
-  virtual int peek();
-  // (write response)
-  virtual size_t write(uint8_t);
-  virtual size_t write(const uint8_t *buf, size_t size);
-  virtual void flush();
-  // TODO: add optimized function for block write
-  
-  virtual operator bool () { return opened; }
-
-  YunClient& operator=(const YunClient &_x);
-
-  virtual void stop();
-  virtual uint8_t connected();
-
-  virtual int connect(IPAddress ip, uint16_t port);
-  virtual int connect(const char *host, uint16_t port);
-
-private:
-  BridgeClass &bridge;
-  unsigned int handle;
-  boolean opened;
-
-private:
-  void doBuffer();
-  uint8_t buffered;
-  uint8_t readPos;
-  static const int BUFFER_SIZE = 64;
-  uint8_t buffer[BUFFER_SIZE];
-  
-};
-
-#endif // _YUN_CLIENT_H_
diff --git a/libraries/Bridge/YunServer.cpp b/libraries/Bridge/YunServer.cpp
deleted file mode 100644
index 3473ce8..0000000
--- a/libraries/Bridge/YunServer.cpp
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include <YunServer.h>
-#include <YunClient.h>
-
-YunServer::YunServer(uint16_t _p, BridgeClass &_b) :
-  bridge(_b), port(_p), listening(false), useLocalhost(false) {
-}
-
-void YunServer::begin() {
-  uint8_t tmp[] = {
-    'N',
-    (port >> 8) & 0xFF,
-    port & 0xFF
-  };
-  uint8_t res[1];
-  String address = F("127.0.0.1");
-  if (!useLocalhost)
-    address = F("0.0.0.0");
-  bridge.transfer(tmp, 3, (const uint8_t *)address.c_str(), address.length(), res, 1);
-  listening = (res[0] == 1);
-}
-
-YunClient YunServer::accept() {
-  uint8_t cmd[] = {'k'};
-  uint8_t res[1];
-  unsigned int l = bridge.transfer(cmd, 1, res, 1);
-  if (l==0)
-    return YunClient();
-  return YunClient(res[0]);
-}
-
-size_t YunServer::write(uint8_t c) {
-  uint8_t cmd[] = { 'b', c };
-  bridge.transfer(cmd, 2);
-  return 1;
-}
-
diff --git a/libraries/Bridge/YunServer.h b/libraries/Bridge/YunServer.h
deleted file mode 100644
index 69fdeab..0000000
--- a/libraries/Bridge/YunServer.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
-  Copyright (c) 2013 Arduino LLC. All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#ifndef _YUN_SERVER_H_
-#define _YUN_SERVER_H_
-
-#include <Bridge.h>
-#include <Server.h>
-
-class YunClient;
-
-class YunServer : public Server {
-public:
-  // Constructor with a user provided BridgeClass instance
-  YunServer(uint16_t port = 5555, BridgeClass &_b = Bridge);
-
-  void begin();
-  YunClient accept();
-
-  virtual size_t write(uint8_t c);
-
-  void listenOnLocalhost()   { useLocalhost = true; }
-  void noListenOnLocalhost() { useLocalhost = false; }
-
-private:
-  uint16_t port;
-  bool listening;
-  bool useLocalhost;
-  BridgeClass &bridge;
-};
-
-#endif // _YUN_SERVER_H_
diff --git a/libraries/Bridge/examples/Bridge/Bridge.ino b/libraries/Bridge/examples/Bridge/Bridge.ino
deleted file mode 100644
index 277982a..0000000
--- a/libraries/Bridge/examples/Bridge/Bridge.ino
+++ /dev/null
@@ -1,175 +0,0 @@
-
-// Possible commands are listed here:
-//
-// "digital/13"     -> digitalRead(13)
-// "digital/13/1"   -> digitalWrite(13, HIGH)
-// "analog/2/123"   -> analogWrite(2, 123)
-// "analog/2"       -> analogRead(2)
-// "mode/13/input"  -> pinMode(13, INPUT)
-// "mode/13/output" -> pinMode(13, OUTPUT)
-
-#include <Bridge.h>
-#include <YunServer.h>
-#include <YunClient.h>
-
-// Listen on default port 5555, the webserver on the Yun
-// will forward there all the HTTP requests for us.
-YunServer server;
-
-void setup() {
-  Serial.begin(9600);
-
-  // Bridge startup
-  pinMode(13,OUTPUT);
-  digitalWrite(13, LOW);
-  Bridge.begin();
-  digitalWrite(13, HIGH);
-
-  // Listen for incoming connection only from localhost
-  // (no one from the external network could connect)
-  server.listenOnLocalhost();
-  server.begin();
-}
-
-void loop() {
-  // Get clients coming from server
-  YunClient client = server.accept();
-
-  // There is a new client?
-  if (client) {
-    // Process request
-    process(client);
-
-    // Close connection and free resources.
-    client.stop();
-  }
-
-  delay(50); // Poll every 50ms
-}
-
-void process(YunClient client) {
-  // read the command
-  String command = client.readStringUntil('/');
-
-  // is "digital" command?
-  if (command == "digital") {
-    digitalCommand(client);
-  }
-
-  // is "analog" command?
-  if (command == "analog") {
-    analogCommand(client);
-  }
-
-  // is "mode" command?
-  if (command == "mode") {
-    modeCommand(client);
-  }
-}
-
-void digitalCommand(YunClient client) {
-  int pin, value;
-
-  // Read pin number
-  pin = client.parseInt();
-
-  // If the next character is a '/' it means we have an URL
-  // with a value like: "/digital/13/1"
-  if (client.read() == '/') {
-    value = client.parseInt();
-    digitalWrite(pin, value);
-  } 
-  else {
-    value = digitalRead(pin);
-  }
-
-  // Send feedback to client
-  client.print(F("Pin D"));
-  client.print(pin);
-  client.print(F(" set to "));
-  client.println(value);
-
-  // Update datastore key with the current pin value
-  String key = "D";
-  key += pin;
-  Bridge.put(key, String(value));
-}
-
-void analogCommand(YunClient client) {
-  int pin, value;
-
-  // Read pin number
-  pin = client.parseInt();
-
-  // If the next character is a '/' it means we have an URL
-  // with a value like: "/analog/5/120"
-  if (client.read() == '/') {
-    // Read value and execute command
-    value = client.parseInt();
-    analogWrite(pin, value);
-
-    // Send feedback to client
-    client.print(F("Pin D"));
-    client.print(pin);
-    client.print(F(" set to analog "));
-    client.println(value);
-
-    // Update datastore key with the current pin value
-    String key = "D";
-    key += pin;
-    Bridge.put(key, String(value));
-  }
-  else {
-    // Read analog pin
-    value = analogRead(pin);
-
-    // Send feedback to client
-    client.print(F("Pin A"));
-    client.print(pin);
-    client.print(F(" reads analog "));
-    client.println(value);
-
-    // Update datastore key with the current pin value
-    String key = "A";
-    key += pin;
-    Bridge.put(key, String(value));
-  }
-}
-
-void modeCommand(YunClient client) {
-  int pin;
-
-  // Read pin number
-  pin = client.parseInt();
-
-  // If the next character is not a '/' we have a malformed URL
-  if (client.read() != '/') {
-    client.println(F("error"));
-    return;
-  }
-
-  String mode = client.readStringUntil('\r');
-
-  if (mode == "input") {
-    pinMode(pin, INPUT);
-    // Send feedback to client
-    client.print(F("Pin D"));
-    client.print(pin);
-    client.print(F(" configured as INPUT!"));
-    return;
-  }
-
-  if (mode == "output") {
-    pinMode(pin, OUTPUT);
-    // Send feedback to client
-    client.print(F("Pin D"));
-    client.print(pin);
-    client.print(F(" configured as OUTPUT!"));
-    return;
-  }
-
-  client.print(F("error: invalid mode "));
-  client.print(mode);
-}
-
-
diff --git a/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino b/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino
deleted file mode 100644
index 4cdf4c1..0000000
--- a/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-  ASCII table
- 
- Prints out byte values in all possible formats:  
- * as raw binary values
- * as ASCII-encoded decimal, hex, octal, and binary values
- 
- For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII
- 
- The circuit:  No external hardware needed.
- 
- created 2006
- by Nicholas Zambetti 
- modified 9 Apr 2012
- by Tom Igoe
- modified 22 May 2013
- by Cristian Maglie
- 
- This example code is in the public domain.
-
- <http://www.zambetti.com> 
- 
- */
- 
-#include <Console.h>
-
-void setup() { 
- //Initialize Console and wait for port to open:
-  Bridge.begin();
-  Console.begin(); 
-  
-  // Uncomment the following line to enable buffering:
-  // - better transmission speed and efficiency
-  // - needs to call Console.flush() to ensure that all 
-  //   transmitted data is sent
-  
-  //Console.buffer(64);
-  
-  while (!Console) {
-    ; // wait for Console port to connect.
-  }
-  
-  // prints title with ending line break 
-  Console.println("ASCII Table ~ Character Map"); 
-} 
-
-// first visible ASCIIcharacter '!' is number 33:
-int thisByte = 33; 
-// you can also write ASCII characters in single quotes.
-// for example. '!' is the same as 33, so you could also use this:
-//int thisByte = '!';  
-
-void loop() { 
-  // prints value unaltered, i.e. the raw binary version of the 
-  // byte. The Console monitor interprets all bytes as 
-  // ASCII, so 33, the first number,  will show up as '!' 
-  Console.write(thisByte);    
-
-  Console.print(", dec: "); 
-  // prints value as string as an ASCII-encoded decimal (base 10).
-  // Decimal is the  default format for Console.print() and Console.println(),
-  // so no modifier is needed:
-  Console.print(thisByte);      
-  // But you can declare the modifier for decimal if you want to.
-  //this also works if you uncomment it:
-
-  // Console.print(thisByte, DEC);  
-
-  Console.print(", hex: "); 
-  // prints value as string in hexadecimal (base 16):
-  Console.print(thisByte, HEX);     
-
-  Console.print(", oct: "); 
-  // prints value as string in octal (base 8);
-  Console.print(thisByte, OCT);     
-
-  Console.print(", bin: "); 
-  // prints value as string in binary (base 2) 
-  // also prints ending line break:
-  Console.println(thisByte, BIN);   
-
-  // if printed last visible character '~' or 126, stop: 
-  if(thisByte == 126) {     // you could also use if (thisByte == '~') {
-    // ensure the latest bit of data is sent
-    Console.flush();
-  	
-    // This loop loops forever and does nothing
-    while(true) { 
-      continue; 
-    } 
-  } 
-  // go on to the next character
-  thisByte++;  
-} 
diff --git a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino b/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino
deleted file mode 100644
index c962b6e..0000000
--- a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-  Console Pixel
- 
- An example of using the Arduino board to receive data from the 
- Console on the Arduino Yun.  In this case, the Arduino boards turns on an LED when
- it receives the character 'H', and turns off the LED when it
- receives the character 'L'.
- 
- To see the Console, pick your Yún's name and IP address in the Port menu
- then open the Port Monitor. You can also see it by opening a terminal window
- and typing 
- ssh root@ yourYunsName.local 'telnet localhost 6571'
- then pressing enter. When prompted for the password, enter it.
- 
- 
- The circuit:
- * LED connected from digital pin 13 to ground
- 
- created 2006
- by David A. Mellis
- modified 25 Jun 2013
- by Tom Igoe 
- 
- This example code is in the public domain.
- 
- */
-
-#include <Console.h>
-
-const int ledPin = 13; // the pin that the LED is attached to
-char incomingByte;      // a variable to read incoming Console data into
-
-void setup() {
-  Bridge.begin();   // Initialize Bridge
-  Console.begin();  // Initialize Console
-
-  // Wait for the Console port to connect
-  while(!Console);
-
-  Console.println("type H or L to turn pin 13 on or off");
-
-  // initialize the LED pin as an output:
-  pinMode(ledPin, OUTPUT);
-}
-
-void loop() {
-  // see if there's incoming Console data:
-  if (Console.available() > 0) {
-    // read the oldest byte in the Console buffer:
-    incomingByte = Console.read();
-    Console.println(incomingByte);
-    // if it's a capital H (ASCII 72), turn on the LED:
-    if (incomingByte == 'H') {
-      digitalWrite(ledPin, HIGH);
-    } 
-    // if it's an L (ASCII 76) turn off the LED:
-    if (incomingByte == 'L') {
-      digitalWrite(ledPin, LOW);
-    }
-  }
-}
-
diff --git a/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino b/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino
deleted file mode 100644
index 0019c20..0000000
--- a/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-  Console Read example
-
- Read data coming from bridge using the Console.read() function
- and store it in a string.
- 
- To see the Console, pick your Yún's name and IP address in the Port menu
- then open the Port Monitor. You can also see it by opening a terminal window
- and typing: 
- ssh root@ yourYunsName.local 'telnet localhost 6571'
- then pressing enter. When prompted for the password, enter it.
- 
- created 13 Jun 2013
- by Angelo Scialabba 
- modified 16 June 2013
- by Tom Igoe
- 
- This example code is in the public domain.
- */
-
-#include <Console.h>
-
-String name;
-
-void setup() {
-  // Initialize Console and wait for port to open:
-  Bridge.begin();
-  Console.begin(); 
-
-  // Wait for Console port to connect
-  while (!Console); 
- 
-  Console.println("Hi, what's your name?");
-} 
-
-void loop() {
-  if (Console.available() > 0) {
-    char c = Console.read(); // read the next char received
-    // look for the newline character, this is the last character in the string
-    if (c == '\n') {
-      //print text with the name received
-      Console.print("Hi ");
-      Console.print(name);
-      Console.println("! Nice to meet you!");
-      Console.println();
-      // Ask again for name and clear the old name
-      Console.println("Hi, what's your name?");
-      name = "";  // clear the name string
-    } 
-    else {  	 // if the buffer is empty Cosole.read() returns -1
-      name += c; // append the read char from Console to the name string
-    }
-  }
-}
-
-
diff --git a/libraries/Bridge/examples/Datalogger/Datalogger.ino b/libraries/Bridge/examples/Datalogger/Datalogger.ino
deleted file mode 100644
index 2d792a4..0000000
--- a/libraries/Bridge/examples/Datalogger/Datalogger.ino
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-  SD card datalogger
- 
- This example shows how to log data from three analog sensors 
- to an SD card mounted on the Arduino Yún using the Bridge library.
- 	
- The circuit:
- * analog sensors on analog pins 0, 1 and 2
- * SD card attached to SD card slot of the Arduino Yún
- 
- Prepare your SD card creating an empty folder in the SD root 
- named "arduino". This will ensure that the Yún will create a link 
- to the SD to the "/mnt/sd" path.
- 
- You can remove the SD card while the Linux and the 
- sketch are running but be careful not to remove it while
- the system is writing to it.
- 
- created  24 Nov 2010
- modified 9 Apr 2012
- by Tom Igoe
- adapted to the Yún Bridge library 20 Jun 2013
- by Federico Vanzati
- modified  21 Jun 2013
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <FileIO.h>
-
-void setup() {
-  // Initialize the Bridge and the Serial
-  Bridge.begin();
-  Serial.begin(9600);
-  FileSystem.begin();
-
-  while(!Serial);  // wait for Serial port to connect.
-  Serial.println("Filesystem datalogger\n");
-}
-
-
-void loop () {
-  // make a string that start with a timestamp for assembling the data to log:
-  String dataString;
-  dataString += getTimeStamp();
-  dataString += " = ";
-
-  // read three sensors and append to the string:
-  for (int analogPin = 0; analogPin < 3; analogPin++) {
-    int sensor = analogRead(analogPin);
-    dataString += String(sensor);
-    if (analogPin < 2) {
-      dataString += ",";  // separate the values with a comma
-    }
-  }
-
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  // The FileSystem card is mounted at the following "/mnt/FileSystema1"
-  File dataFile = FileSystem.open("/mnt/sd/datalog.txt", FILE_APPEND);
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    dataFile.println(dataString);
-    dataFile.close();
-    // print to the serial port too:
-    Serial.println(dataString);
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-  
-  delay(15000);
-
-}
-
-// This function return a string with the time stamp
-String getTimeStamp() {
-  String result;
-  Process time;
-  // date is a command line utility to get the date and the time 
-  // in different formats depending on the additional parameter 
-  time.begin("date");
-  time.addParameter("+%D-%T");  // parameters: D for the complete date mm/dd/yy
-                                //             T for the time hh:mm:ss    
-  time.run();  // run the command
-
-  // read the output of the command
-  while(time.available()>0) {
-    char c = time.read();
-    if(c != '\n')
-      result += c;
-  }
-  
-  return result;
-}
diff --git a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino
deleted file mode 100644
index b550db2..0000000
--- a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-  Write to file using FileIO classes.
- 
- This sketch demonstrate how to write file into the Yún filesystem.
- A shell script file is created in /tmp, and it is executed afterwards.
-
- created 7 June 2010
- by Cristian Maglie 
- 
- This example code is in the public domain.
-
- */
- 
-#include <FileIO.h>
-
-void setup() {
-  // Setup Bridge (needed every time we communicate with the Arduino Yún)
-  Bridge.begin();
-  // Initialize the Serial
-  Serial.begin(9600);
-  
-  while(!Serial);  // wait for Serial port to connect.
-  Serial.println("File Write Script example\n\n");
-  
-  // Setup File IO
-  FileSystem.begin();
-
-  // Upload script used to gain network statistics  
-  uploadScript();
-}  
-
-void loop() {
-  // Run stats script every 5 secs.
-  runScript();
-  delay(5000);
-}
-
-// this function creates a file into the linux processor that contains a shell script
-// to check the network traffic of the WiFi interface
-void uploadScript() {
-  // Write our shell script in /tmp
-  // Using /tmp stores the script in RAM this way we can preserve 
-  // the limited amount of FLASH erase/write cycles
-  File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE);
-  // Shell script header 
-  script.print("#!/bin/sh\n");
-  // shell commands:
-  // ifconfig: is a command line utility for controlling the network interfaces.
-  //           wlan0 is the interface we want to query
-  // grep: search inside the output of the ifconfig command the "RX bytes" keyword
-  //       and extract the line that contains it
-  script.print("ifconfig wlan0 | grep 'RX bytes'\n");
-  script.close();  // close the file
-  
-  // Make the script executable
-  Process chmod;
-  chmod.begin("chmod");      // chmod: change mode
-  chmod.addParameter("+x");  // x stays for executable
-  chmod.addParameter("/tmp/wlan-stats.sh");  // path to the file to make it executable
-  chmod.run();
-}
-
-
-// this function run the script and read the output data
-void runScript() {
-  // Run the script and show results on the Serial
-  Process myscript;
-  myscript.begin("/tmp/wlan-stats.sh");
-  myscript.run();
-  
-  String output = "";
-  
-  // read the output of the script
-  while (myscript.available()) {
-    output += (char)myscript.read();
-  }
-  // remove the blank spaces at the beginning and the ending of the string
-  output.trim();
-  Serial.println(output);
-  Serial.flush();
-}
-
diff --git a/libraries/Bridge/examples/HttpClient/HttpClient.ino b/libraries/Bridge/examples/HttpClient/HttpClient.ino
deleted file mode 100644
index 4104ef4..0000000
--- a/libraries/Bridge/examples/HttpClient/HttpClient.ino
+++ /dev/null
@@ -1,26 +0,0 @@
-
-#include <Bridge.h>
-#include <HttpClient.h>
-
-void setup() {
-  pinMode(13, OUTPUT);
-  digitalWrite(13, LOW);
-  Bridge.begin();
-  Serial.begin(9600);
-  while(!Serial);
-}
-
-void loop() {
-  HttpClient client;
-  client.get("http://arduino.cc/asciilogo.txt");
-  
-  while (client.available()) {
-    char c = client.read();
-    Serial.print(c);
-  }
-  Serial.flush();
-  
-  delay(5000);
-}
-
-
diff --git a/libraries/Bridge/examples/Process/Process.ino b/libraries/Bridge/examples/Process/Process.ino
deleted file mode 100644
index 7646d15..0000000
--- a/libraries/Bridge/examples/Process/Process.ino
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-  Running process using Process class. 
- 
- This sketch demonstrate how to run linux processes
- using an Arduino Yún. 
- 
- created 5 Jun 2013
- by Cristian Maglie
- 
- This example code is in the public domain.
-
- */
-
-#include <Process.h>
-
-void setup() {
-  // Initialize Bridge
-  Bridge.begin();
-  
-  // Initialize Serial
-  Serial.begin(9600);
-  
-  // Wait until a Serial Monitor is connected.
-  while (!Serial);
-
-  // run various example processes
-  runCurl();
-  runCpuInfo();
-}
-
-void loop() {
-  // Do nothing here.
-}
-
-void runCurl() {
-  // Launch "curl" command and get Arduino ascii art logo from the network
-  // curl is command line program for transferring data using different internet protocols
-  Process p;		// Create a process and call it "p"
-  p.begin("curl");	// Process that launch the "curl" command
-  p.addParameter("http://arduino.cc/asciilogo.txt"); // Add the URL parameter to "curl"
-  p.run();		// Run the process and wait for its termination
-
-  // Print arduino logo over the Serial
-  // A process output can be read with the stream methods
-  while (p.available()>0) {
-    char c = p.read();
-    Serial.print(c);
-  }
-  // Ensure the last bit of data is sent.
-  Serial.flush();
-}
-
-void runCpuInfo() {
-  // Launch "cat /proc/cpuinfo" command (shows info on Atheros CPU)
-  // cat is a command line utility that shows the content of a file
-  Process p;		// Create a process and call it "p"
-  p.begin("cat");	// Process that launch the "cat" command
-  p.addParameter("/proc/cpuinfo"); // Add the cpuifo file path as parameter to cut
-  p.run();		// Run the process and wait for its termination
-
-  // Print command output on the Serial.
-  // A process output can be read with the stream methods
-  while (p.available()>0) {
-    char c = p.read();
-    Serial.print(c);
-  }
-  // Ensure the last bit of data is sent.
-  Serial.flush();
-}
-
diff --git a/libraries/Bridge/examples/ShellCommands/ShellCommands.ino b/libraries/Bridge/examples/ShellCommands/ShellCommands.ino
deleted file mode 100644
index 5a4c291..0000000
--- a/libraries/Bridge/examples/ShellCommands/ShellCommands.ino
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-  Running shell commands using Process class. 
- 
- This sketch demonstrate how to run linux shell commands
- using an Arduino Yún. It runs the wifiCheck script on the linino side
- of the Yun, then uses grep to get just the signal strength line.
- Then it uses parseInt() to read the wifi signal strength as an integer,
- and finally uses that number to fade an LED using analogWrite().
- 
- The circuit:
- * Arduino Yun with LED connected to pin 9
- 
- created 12 Jun 2013
- by Cristian Maglie
- modified 25 June 2013
- by Tom Igoe
- 
- This example code is in the public domain.
- 
- */
-
-#include <Process.h>
-
-void setup() {
-  Bridge.begin();	// Initialize the Bridge
-  Serial.begin(9600);	// Initialize the Serial
-
-  // Wait until a Serial Monitor is connected.
-  while(!Serial);
-}
-
-void loop() {
-  Process p;
-  // This command line runs the WifiStatus script, (/usr/bin/pretty-wifi-info.lua), then 
-  // sends the result to the grep command to look for a line containing the word
-  // "Signal:"  the result is passed to this sketch:
-  p.runShellCommand("/usr/bin/pretty-wifi-info.lua | grep Signal");
-
-  // do nothing until the process finishes, so you get the whole output:
-  while(p.running());  
-
-  // Read command output. runShellCommand() should have passed "Signal: xx&":
-  while (p.available()) {
-    int result = p.parseInt();			// look for an integer
-    int signal = map(result, 0, 100, 0, 255);	// map result from 0-100 range to 0-255
-    analogWrite(9, signal);			// set the brightness of LED on pin 9
-    Serial.println(result);			// print the number as well
-  } 
-  delay(5000);  // wait 5 seconds before you do it again
-}
-
-
-
diff --git a/libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino b/libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino
deleted file mode 100644
index be22850..0000000
--- a/libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
-  Input Output
-
- Demonstrates how to create a sketch that sends and receives all standard
- spacebrew data types, and a custom data type. Every time data is 
- received it is output to the Serial monitor.
-
- Make sure that your Yun is connected to the internet for this example 
- to function properly.
- 
- The circuit:
- - No circuit required
- 
- created 2013
- by Julio Terra
- 
- This example code is in the public domain.
- 
- More information about Spacebrew is available at: 
- http://spacebrew.cc/
- 
- */
-
-#include <Bridge.h>
-#include <SpacebrewYun.h>
-
-// create a variable of type SpacebrewYun and initialize it with the constructor
-SpacebrewYun sb = SpacebrewYun("aYun", "Arduino Yun spacebrew test");
-
-// create variables to manage interval between each time we send a string
-long last = 0;
-int interval = 2000;
-
-int counter = 0;
-
-void setup() { 
-
-	// start the serial port
-	Serial.begin(57600);
-
-	// for debugging, wait until a serial console is connected
-	delay(4000);
-	while (!Serial) { ; }
-
-	// start-up the bridge
-	Bridge.begin();
-
-	// configure the spacebrew object to print status messages to serial
-	sb.verbose(true);
-
-	// configure the spacebrew publisher and subscriber
-	sb.addPublish("string test", "string");
-	sb.addPublish("range test", "range");
-	sb.addPublish("boolean test", "boolean");
-	sb.addPublish("custom test", "crazy");
-	sb.addSubscribe("string test", "string");
-	sb.addSubscribe("range test", "range");
-	sb.addSubscribe("boolean test", "boolean");
-	sb.addSubscribe("custom test", "crazy");
-
-	// register the string message handler method 
-	sb.onRangeMessage(handleRange);
-	sb.onStringMessage(handleString);
-	sb.onBooleanMessage(handleBoolean);
-	sb.onCustomMessage(handleCustom);
-
-	// connect to cloud spacebrew server at "sandbox.spacebrew.cc"
-	sb.connect("sandbox.spacebrew.cc"); 
-
-} 
-
-
-void loop() { 
-	// monitor spacebrew connection for new data
-	sb.monitor();
-
-	// connected to spacebrew then send a string every 2 seconds
-	if ( sb.connected() ) {
-
-		// check if it is time to send a new message
-		if ( (millis() - last) > interval ) {
-			String test_str_msg = "testing, testing, ";
-			test_str_msg += counter;
-			counter ++;
-
-			sb.send("string test", test_str_msg);
-			sb.send("range test", 500);
-			sb.send("boolean test", true);
-			sb.send("custom test", "youre loco");
-
-			last = millis();
-
-		}
-	}
-} 
-
-// define handler methods, all standard data type handlers take two appropriate arguments
-
-void handleRange (String route, int value) {
-	Serial.print("Range msg ");
-	Serial.print(route);
-	Serial.print(", value ");
-	Serial.println(value);
-}
-
-void handleString (String route, String value) {
-	Serial.print("String msg ");
-	Serial.print(route);
-	Serial.print(", value ");
-	Serial.println(value);
-}
-
-void handleBoolean (String route, boolean value) {
-	Serial.print("Boolen msg ");
-	Serial.print(route);
-	Serial.print(", value ");
-	Serial.println(value ? "true" : "false");
-}
-
-// custom data type handlers takes three String arguments
-
-void handleCustom (String route, String value, String type) {
-	Serial.print("Custom msg ");
-	Serial.print(route);
-	Serial.print(" of type ");
-	Serial.print(type);
-	Serial.print(", value ");
-	Serial.println(value);
-}
-
diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino
deleted file mode 100644
index 0f068aa..0000000
--- a/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-  Spacebrew Boolean
- 
- Demonstrates how to create a sketch that sends and receives a
- boolean value to and from Spacebrew. Every time the buttton is 
- pressed (or other digital input component) a spacebrew message 
- is sent. The sketch also accepts analog range messages from 
- other Spacebrew apps.
-
- Make sure that your Yun is connected to the internet for this example 
- to function properly.
- 
- The circuit:
- - Button connected to Yun, using the Arduino's internal pullup resistor.
- 
- created 2013
- by Julio Terra
- 
- This example code is in the public domain.
- 
- More information about Spacebrew is available at: 
- http://spacebrew.cc/
- 
- */
-
-#include <Bridge.h>
-#include <SpacebrewYun.h>
-
-// create a variable of type SpacebrewYun and initialize it with the constructor
-SpacebrewYun sb = SpacebrewYun("spacebrewYun Boolean", "Boolean sender and receiver");
-
-// variable that holds the last potentiometer value
-int last_value = 0;
-
-// create variables to manage interval between each time we send a string
-void setup() { 
-
-	// start the serial port
-	Serial.begin(57600);
-
-	// for debugging, wait until a serial console is connected
-	delay(4000);
-	while (!Serial) { ; }
-
-	// start-up the bridge
-	Bridge.begin();
-
-	// configure the spacebrew object to print status messages to serial
-	sb.verbose(true);
-
-	// configure the spacebrew publisher and subscriber
-	sb.addPublish("physical button", "boolean");
-	sb.addSubscribe("virtual button", "boolean");
-
-	// register the string message handler method 
-	sb.onBooleanMessage(handleBoolean);
-
-	// connect to cloud spacebrew server at "sandbox.spacebrew.cc"
-	sb.connect("sandbox.spacebrew.cc"); 
-
-	pinMode(3, INPUT);
-	digitalWrite(3, HIGH);
-} 
-
-
-void loop() { 
-	// monitor spacebrew connection for new data
-	sb.monitor();
-
-	// connected to spacebrew then send a new value whenever the pot value changes
-	if ( sb.connected() ) {
-		int cur_value = digitalRead(3);
-		if ( last_value != cur_value ) {
-			if (cur_value == HIGH) sb.send("physical button", false);
-			else sb.send("physical button", true);
-			last_value = cur_value;
-		}
-	}
-} 
-
-// handler method that is called whenever a new string message is received 
-void handleBoolean (String route, boolean value) {
-	// print the message that was received
-	Serial.print("From ");
-	Serial.print(route);
-	Serial.print(", received msg: ");
-	Serial.println(value ? "true" : "false");
-}
-
diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino
deleted file mode 100644
index 6dcbff8..0000000
--- a/libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-  Spacebrew Range
- 
- Demonstrates how to create a sketch that sends and receives analog
- range value to and from Spacebrew. Every time the state of the 
- potentiometer (or other analog input component) change a spacebrew
- message is sent. The sketch also accepts analog range messages from 
- other Spacebrew apps.
-
- Make sure that your Yun is connected to the internet for this example 
- to function properly.
- 
- The circuit:
- - Potentiometer connected to Yun. Middle pin connected to analog pin A0, 
-   other pins connected to 5v and GND pins.
- 
- created 2013
- by Julio Terra
- 
- This example code is in the public domain.
- 
- More information about Spacebrew is available at: 
- http://spacebrew.cc/
- 
- */
-
-#include <Bridge.h>
-#include <SpacebrewYun.h>
-
-// create a variable of type SpacebrewYun and initialize it with the constructor
-SpacebrewYun sb = SpacebrewYun("spacebrewYun Range", "Range sender and receiver");
-
-// variable that holds the last potentiometer value
-int last_value = 0;
-
-// create variables to manage interval between each time we send a string
-void setup() { 
-
-	// start the serial port
-	Serial.begin(57600);
-
-	// for debugging, wait until a serial console is connected
-	delay(4000);
-	while (!Serial) { ; }
-
-	// start-up the bridge
-	Bridge.begin();
-
-	// configure the spacebrew object to print status messages to serial
-	sb.verbose(true);
-
-	// configure the spacebrew publisher and subscriber
-	sb.addPublish("physical pot", "range");
-	sb.addSubscribe("virtual pot", "range");
-
-	// register the string message handler method 
-	sb.onRangeMessage(handleRange);
-
-	// connect to cloud spacebrew server at "sandbox.spacebrew.cc"
-	sb.connect("sandbox.spacebrew.cc"); 
-} 
-
-
-void loop() { 
-	// monitor spacebrew connection for new data
-	sb.monitor();
-
-	// connected to spacebrew then send a new value whenever the pot value changes
-	if ( sb.connected() ) {
-		int cur_value = analogRead(A0);
-		if ( last_value != cur_value ) {
-			sb.send("physical pot", cur_value);
-			last_value = cur_value;
-		}
-	}
-} 
-
-// handler method that is called whenever a new string message is received 
-void handleRange (String route, int value) {
-	// print the message that was received
-	Serial.print("From ");
-	Serial.print(route);
-	Serial.print(", received msg: ");
-	Serial.println(value);
-}
-
diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino
deleted file mode 100644
index 8c8f1c7..0000000
--- a/libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-  Spacebrew String
- 
- Demonstrates how to create a sketch that sends and receives strings
- to and from Spacebrew. Every time string data is received it 
- is output to the Serial monitor.
-
- Make sure that your Yun is connected to the internet for this example 
- to function properly.
- 
- The circuit:
- - No circuit required
- 
- created 2013
- by Julio Terra
- 
- This example code is in the public domain.
- 
- More information about Spacebrew is available at: 
- http://spacebrew.cc/
- 
- */
-
-#include <Bridge.h>
-#include <SpacebrewYun.h>
-
-// create a variable of type SpacebrewYun and initialize it with the constructor
-SpacebrewYun sb = SpacebrewYun("spacebrewYun Strings", "String sender and receiver");
-
-// create variables to manage interval between each time we send a string
-long last_time = 0;
-int interval = 2000;
-
-void setup() { 
-
-	// start the serial port
-	Serial.begin(57600);
-
-	// for debugging, wait until a serial console is connected
-	delay(4000);
-	while (!Serial) { ; }
-
-	// start-up the bridge
-	Bridge.begin();
-
-	// configure the spacebrew object to print status messages to serial
-	sb.verbose(true);
-
-	// configure the spacebrew publisher and subscriber
-	sb.addPublish("speak", "string");
-	sb.addSubscribe("listen", "string");
-
-	// register the string message handler method 
-	sb.onStringMessage(handleString);
-
-	// connect to cloud spacebrew server at "sandbox.spacebrew.cc"
-	sb.connect("sandbox.spacebrew.cc"); 
-} 
-
-
-void loop() { 
-	// monitor spacebrew connection for new data
-	sb.monitor();
-
-	// connected to spacebrew then send a string every 2 seconds
-	if ( sb.connected() ) {
-
-		// check if it is time to send a new message
-		if ( (millis() - last_time) > interval ) {
-			sb.send("speak", "is anybody out there?");
-			last_time = millis();
-		}
-	}
-} 
-
-// handler method that is called whenever a new string message is received 
-void handleString (String route, String value) {
-	// print the message that was received
-	Serial.print("From ");
-	Serial.print(route);
-	Serial.print(", received msg: ");
-	Serial.println(value);
-}
-
diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino
deleted file mode 100644
index 6543935..0000000
--- a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
-  ControlBySMS
-
-  Demonstrates using an SMS message to a Twilio account to turn an LED
-  on the Yun board on and off using the Temboo Arduino Yun SDK.
-  Sending a SMS with the text "LED ON" to your Twilio phone number
-  will turn on the LED on the Yun.  Sending "LED OFF" will turn it off.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  Since this sketch uses Twilio to retrieve the SMS, you'll also need a valid 
-  Twilio account. You can create one for free at https://www.twilio.com.
- 
-  The sketch needs your Twilio Account SID and Auth Token you get when you 
-  register with Twilio.  Make sure to use the Account SID and Auth Token from 
-  your Twilio Dashboard (not your test credentials from the Dev Tools panel).
-
-  Normally, Twilio expects to contact a web site you provide to get a response
-  when an SMS message is received for your Twilio number.  In this case, we 
-  don't want to send any response (and we don't want to have to set up a web
-  site just to receive SMS messages.)  You can use a URL that Twilio provides
-  for this purpose.  When a message is received and sent to the Twilio "twimlets"
-  URL, it returns a code meaning "no response required."  To set this up:
-
-  1. Log in to your Twilio account and go to this URL:
-  
-      https://www.twilio.com/user/account/phone-numbers/incoming
-
-  2. Select the Twilio number you want to receive SMS messages at.
-
-  3. Put this URL in the "SMS Request URL" field:
-
-     http://twimlets.com/echo?Twiml=%3CResponse%3E%3C%2FResponse%3E
-
-     See this link to Twilio's FAQ for details:
-
-     https://www.twilio.com/help/faq/sms/how-can-i-receive-sms-messages-without-responding
-
-  4. Click the "Save Changes" button at the bottom of the page. 
-
-  Your account will now receive SMS messages, but won't send any responses.
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Looking for another API? We've got over 100 in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-
-// the Account SID from your Twilio account
-const String TWILIO_ACCOUNT_SID = "xxxxxxxxxxxxxxxxxx";
-
-// the Auth Token from your Twilio account
-const String TWILIO_AUTH_TOKEN = "xxxxxxxxxxxxxxxxx";
-
-// only act on messages sent from this phone number. (e.g. 15415551212)
-const String FROM_PHONE_NUMBER = "xxxxxxxxxxx";
-
-// how often (in milliseconds) to check for new SMS messages.
-const unsigned long SMS_CHECK_PERIOD = 60000;
-
-// keep track of when we last checked for new messages
-// (initialize it to SMS_CHECK_PERIOD seconds ago so
-// we do the first check as soon as the sketch starts.)
-unsigned long lastSMSCheckTime = -SMS_CHECK_PERIOD;
-
-// keep track of the ID of the last SMS message we processed.
-// (we only need to process newer messages)
-String lastSid;
-
-// we'll be turning the LED built in to the Yun on and off 
-// to simulate controlling some device.  That LED is on pin 13.
-int LED_PIN = 13;
-
-int numRuns = 1;   // execution count, so this doesn't run forever
-int maxRuns = 10;   // the max number of times the Twitter HomeTimeline Choreo should run
-
-
-void setup() {
-  Serial.begin(9600);
-
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-
-  // tell the board to treat the LED pin as an output.
-  pinMode(LED_PIN, OUTPUT);
-
-  // start with the LED off
-  digitalWrite(LED_PIN, LOW);
-
-  // initialize the connection to the Linino processor.
-  Bridge.begin();
-
-  // Twilio will report old SMS messages.  We want to 
-  // ignore any existing control messages when we start.
-  Serial.println("Ignoring any existing control messages...");
-  checkForMessages(true);
-
-}
-
-void loop()
-{
-
-  // get the number of milliseconds the CPU has been running.
-  unsigned long now = millis();
-
-  // see if it's time to check for new SMS messages.
-  if (now - lastSMSCheckTime >= SMS_CHECK_PERIOD) {
-    
-    // it's time to check for new messages
-    // save this time so we know when to check next
-    lastSMSCheckTime = now;
-    
-    if (numRuns <= maxRuns) {
-      Serial.println("Checking for new SMS messages - Run #" + String(numRuns++));
-      
-      // execute the choreo and don't ignore control messages. 
-      checkForMessages(false);
-    } else {
-      Serial.println("Already ran " + String(maxRuns) + " times.");
-    }
-  }
-}
-
-/*
-This function executes the Twilio > SMSMessages > ListMessages choreo
-and processes the results.
-
-If ignoreCommands is 'true', this function will read and process messages
-updating 'lastSid', but will not actually take any action on any commands 
-found.  This is so we can ignore any old control messages when we start.
-
-If ignoreCommands is 'false', control messages WILL be acted on.
-*/
-void checkForMessages(bool ignoreCommands) {
-
-  // we need a TembooChoreo object to send a Choreo request to Temboo
-  TembooChoreo ListMessagesChoreo;
-
-  ListMessagesChoreo.begin();
-  
-  // set Temboo account credentials
-  ListMessagesChoreo.setAccountName(TEMBOO_ACCOUNT);
-  ListMessagesChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-  ListMessagesChoreo.setAppKey(TEMBOO_APP_KEY);
-
-  // identify the Temboo Library choreo to run (Twilio > SMSMessages > ListMessages)
-  ListMessagesChoreo.setChoreo("/Library/Twilio/SMSMessages/ListMessages");
-
-  // set the choreo inputs
-  // see https://www.temboo.com/library/Library/Twilio/SMSMessages/ListMessages/ 
-  // for complete details about the inputs for this Choreo
-
-  // the first input is a your Twilio AccountSID
-  ListMessagesChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID);
-  
-  // next is your Twilio Auth Token
-  ListMessagesChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN);
-
-  // we only want to know about messages sent from our designated phone number
-  ListMessagesChoreo.addInput("From", FROM_PHONE_NUMBER);
-
-  // Twilio can return information about up to 1000 messages at a time.
-  // we're only interested in the 3 most recent ones.  Note that if 
-  // this account receives lots of messages in quick succession, 
-  // (more than 3 per minute in this case), we might miss some control
-  // messages.  But if we request too many messages, we might run out of 
-  // memory on the Arduino side of the Yun.
-  ListMessagesChoreo.addInput("PageSize", "3");
-
-  // We want the response in XML format to process with our 
-  // XPath output filters.
-  ListMessagesChoreo.addInput("ResponseFormat", "xml");
-
-  // we don't want everything from the output, just the 
-  // message IDs (the Sids) and the message texts
-  ListMessagesChoreo.addOutputFilter("sid", "Sid", "Response");
-  ListMessagesChoreo.addOutputFilter("text", "Body", "Response");
-
-  // tell the Choreo to run and wait for the results. The 
-  // return code (returnCode) will tell us whether the Temboo client 
-  // was able to send our request to the Temboo servers
-  unsigned int returnCode = ListMessagesChoreo.run();
-
-  // a return code of zero (0) means success
-  if (returnCode == 0) {
-
-    // Need a string to hold the list of message IDs.
-    String messageSids;  
-
-    // Need a string to hold the texts of the messages.
-    String messageTexts;
-
-    // when the choreo results are available, process them.
-    // the output filters we specified will return comma delimited
-    // lists containing the Sids and texts of the messages
-    // from our designated phone number.
-
-    while(ListMessagesChoreo.available()) {
-      
-      // output names are terminated with '\x1F' characters.
-      String name = ListMessagesChoreo.readStringUntil('\x1F');
-      name.trim();
-      //Serial.println(name);
-
-      // output values are terminated with '\x1E' characters.
-      String data = ListMessagesChoreo.readStringUntil('\x1E');
-      data.trim();
-      //Serial.println(data);
-
-      // assign the data to the appropriate string based on the name
-      if (name == "sid") {
-        messageSids = data;
-      } else if (name == "text") {
-        messageTexts = data;
-      }
-    }
-
-    // done reading output, close the Choreo to free up resources.
-    ListMessagesChoreo.close();
-    
-    // parse the comma delimited lists of messages and Sids 
-    processMessages(messageTexts, messageSids, ignoreCommands);
-
-  } else {
-    // a non-zero return code means there was an error
-    // read and print the error message
-    while(ListMessagesChoreo.available()) {
-      char c = ListMessagesChoreo.read();
-      Serial.print(c);
-    }
-  }
-}
-
-/* 
-This function processes the lists of message texts and Sids.
-If a message contains a comma as part of the 
-message text, that message will be enclosed in double quotes
-(") in the list.  Example:
-
-  A message,"Hey, now",Another message text
-
-If the message contains double quotes, it will be enclosed in
-double quotes AND the internal quotes will be doubled.  
-Example:
-
-  "Hi ""Sam"" the man", Led on
-
-NOTE! We are assuming that Twilio returns more recent messages
-first.  This isn't officially documented by Twilio, but we've 
-not seen any other case.
-
-'messageTexts' is a String containing a comma separated list of
-message texts with commas and quotes escaped as described above.
-
-'messageSids' is a String containing a comma separated list of 
-message Sids.  Sids should not contain embedded commas or quotes.
-
-'ignoreCommands' is a boolean. 'true' means and control messages 
-will not be acted upon.  'false' means control messages will be 
-acted upon in the usual way.
-*/
-void processMessages(String messageTexts, String messageSids, bool ignoreCommands) {
-
-  // proceed if we received at least one message
-  if (messageSids.length() > 0) {
-    int i = -1;
-    int sidsStart = 0;
-    int textsStart = 0;
-    String sid;
-    String text;
-    bool ledUpdated = false;
-
-    // go through the list until we run out of items
-    // or otherwise know we can stop
-    do {
-
-      // Output filter list items are separated by commas
-      // find the start of the next item in the list
-      i = messageSids.indexOf(',', sidsStart);
-      if (i >= 0) {
-        
-        //extract a single Sid from the list.
-        sid = messageSids.substring(sidsStart, i);
-        sidsStart = i + 1;
-
-        // find the start of the next text in the list.  
-        // Note that we have to be prepared to handle embedded
-        // quotes and commans in the message texts.  
-        // The standard Arduino String class doesn't handle
-        // this, so we have to write our own function to do it.
-        i = quotedIndexOf(messageTexts, ',', textsStart);
-        if (i >= 0) {
-
-          // extract a single message text from the list.
-          text = messageTexts.substring(textsStart, i);
-          textsStart = i + 1;
-
-          // process the Sid and text to see if it's a 
-          // control message.
-          ledUpdated = processMessage(sid, text, ignoreCommands);
-        }
-      } else {
-        
-        // the last item in the lists won't have a comma at the end,
-        // so we have to handle them specially.
-        // Since we know this is the last item, we can just
-        // take the rest of the string for the Sid and text.
-        sid = messageSids.substring(sidsStart);
-        text = messageTexts.substring(textsStart);
-
-        // process the last item.
-        ledUpdated = processMessage(sid, text, ignoreCommands);
-      }
-
-      // keep going until either we run out of list items
-      // or we run into a message we processed on a previous run.
-    } while ((i >=0) && (sid != lastSid));
-   
-    // print what we've found to the serial monitor, 
-    // just so we can see what's going on.
-    if (sid == lastSid) {
-      if (ledUpdated)
-        Serial.println("Control message processed.");
-      else
-        Serial.println("No new control messages received.");
-    } else {
-      Serial.println("No control messages received.");
-    }
-  } else {
-    Serial.println("No messages found");
-  }
-}
-
-/*
-This function knows how to tell if a message is a control message
-or not.  It also knows know to control whatever it is we're controlling
-(the state of the LED on pin 13 in this case.)
-
-A message with the text "LED ON" turns the LED on.
-A message with the text "LED OFF" turns the LED off.
-(Case is ignored.)
-
-If 'ignoreCommands' is true, the actions described above will NOT 
-take place.  
-
-It also updates the 'lastSid' global variable when 
-a control message is processed.
-
-It returns 'true' if the message was a control message, and
-'false' if it wasn't or if we've already processed this message.
-*/
-bool processMessage(String sid, String text, bool ignoreCommands) {
-  
-  // a flag to indicate whether this was a control message or not
-  bool ledUpdated = false;
-
-  // if we haven't already processed this message
-  if (sid != lastSid) {
-
-    if (text.equalsIgnoreCase("LED ON")) {
-      
-      if (!ignoreCommands) {
-        //turn on the LED
-        digitalWrite(LED_PIN, HIGH);
-        Serial.println("LED ON");
-      }
-      ledUpdated = true;
-    } else if (text.equalsIgnoreCase("LED OFF")) {
-      if (!ignoreCommands) {
-        //turn off the LED
-        digitalWrite(LED_PIN, LOW);
-        Serial.println("LED OFF");
-      }
-      ledUpdated = true;
-    }
-
-    // If the LED state was updated, remember the Sid if this message.
-    if (ledUpdated) 
-      lastSid = sid;
-  }
-  return ledUpdated;
-}
-
-/*
-This function finds the index of a delimiter character in a String,
-ignoring delimiters that appear inside double-quotes.
-*/
-int quotedIndexOf(String s, char delim, int start) {
-  bool inQuotes = false;
-  char c;
-  int index = -1;
-  const char QUOTE = '"';
-  do {
-    c = s[start++];
-    if (c == QUOTE)
-      inQuotes = !inQuotes;
-    else if (c == delim && !inQuotes)
-      index = --start;
-  } while ((c != '\0') && (index < 0));
-  return index;
-}
-
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can save it once, 
-  then just distribute the main .ino file without worrying that you forgot to delete your credentials.
-*/
-
diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h
deleted file mode 100644
index 8d7dcfb..0000000
--- a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-
diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino
deleted file mode 100644
index 669aba5..0000000
--- a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
-  GetYahooWeatherReport
-  
-  Demonstrates making a request to the Yahoo! Weather API using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-  
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-  
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-
-// the address for which a weather forecast will be retrieved
-String ADDRESS_FOR_FORECAST = "104 Franklin St., New York NY 10013";
-
-int numRuns = 1;   // execution count, so that this doesn't run forever
-int maxRuns = 10;  // max number of times the Yahoo WeatherByAddress Choreo should be run
-
-
-void setup() {
-  Serial.begin(9600);
-    
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-  Bridge.begin();
-
-}
-
-void loop()
-{
-  // while we haven't reached the max number of runs...
-  if (numRuns <= maxRuns) {
-      
-    // print status
-    Serial.println("Running GetWeatherByAddress - Run #" + String(numRuns++) + "...");
-
-    // create a TembooChoreo object to send a Choreo request to Temboo
-    TembooChoreo GetWeatherByAddressChoreo;
-    
-    // invoke the Temboo client
-    GetWeatherByAddressChoreo.begin();
-
-    // add your temboo account info
-    GetWeatherByAddressChoreo.setAccountName(TEMBOO_ACCOUNT);
-    GetWeatherByAddressChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    GetWeatherByAddressChoreo.setAppKey(TEMBOO_APP_KEY);
-    
-    // set the name of the choreo we want to run
-    GetWeatherByAddressChoreo.setChoreo("/Library/Yahoo/Weather/GetWeatherByAddress");
-    
-    // set choreo inputs; in this case, the address for which to retrieve weather data
-    // the Temboo client provides standardized calls to 100+ cloud APIs
-    GetWeatherByAddressChoreo.addInput("Address", ADDRESS_FOR_FORECAST);
-
-    // add an output filter to extract the name of the city.
-    GetWeatherByAddressChoreo.addOutputFilter("city", "/rss/channel/yweather:location/@city", "Response");
-    
-    // add an output filter to extract the current temperature
-    GetWeatherByAddressChoreo.addOutputFilter("temperature", "/rss/channel/item/yweather:condition/@temp", "Response");
-
-    // add an output filter to extract the date and time of the last report.
-    GetWeatherByAddressChoreo.addOutputFilter("date", "/rss/channel/item/yweather:condition/@date", "Response");
-
-    // run the choreo 
-    GetWeatherByAddressChoreo.run();
-        
-    // when the choreo results are available, print them to the serial monitor
-    while(GetWeatherByAddressChoreo.available()) {
-          
-      char c = GetWeatherByAddressChoreo.read();    
-      Serial.print(c);
-    }
-    GetWeatherByAddressChoreo.close();
-
-  }
-
-  Serial.println("Waiting...");
-  Serial.println("");
-  delay(30000); // wait 30 seconds between GetWeatherByAddress calls
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h
deleted file mode 100644
index c58b447..0000000
--- a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino b/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino
deleted file mode 100644
index b2edd1f..0000000
--- a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-  ReadATweet
-
-  Demonstrates retrieving the most recent Tweet from a user's home timeline 
-  using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  In order to run this sketch, you'll need to register an application using
-  the Twitter dev console at https://dev.twitter.com. After creating the 
-  app, you'll find OAuth credentials for that application under the "OAuth Tool" tab. 
-  Substitute these values for the placeholders below. 
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun 
-  is connected to the Internet.
-
-  Want to use another social API with your Arduino Yun? We've got Facebook, 
-  Google+, Instagram, Tumblr and more in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token";
-const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret";
-const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key";
-const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret";
-
-int numRuns = 1;   // execution count, so this doesn't run forever
-int maxRuns = 10;   // the max number of times the Twitter HomeTimeline Choreo should run
-
-void setup() {
-  Serial.begin(9600);
-  
-  // For debugging, wait until a serial console is connected.
-  delay(4000);
-  while(!Serial);
-  Bridge.begin();
-}
-void loop()
-{
-  // while we haven't reached the max number of runs...
-  if (numRuns <= maxRuns) {
-    Serial.println("Running ReadATweet - Run #" + String(numRuns++));
-    
-    TembooChoreo HomeTimelineChoreo;
-
-    // invoke the Temboo client.
-    // NOTE that the client must be reinvoked, and repopulated with
-    // appropriate arguments, each time its run() method is called.
-    HomeTimelineChoreo.begin();
-    
-    // set Temboo account credentials
-    HomeTimelineChoreo.setAccountName(TEMBOO_ACCOUNT);
-    HomeTimelineChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    HomeTimelineChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // tell the Temboo client which Choreo to run (Twitter > Timelines > HomeTimeline)
-    HomeTimelineChoreo.setChoreo("/Library/Twitter/Timelines/HomeTimeline");
-    
-    
-    // set the required choreo inputs
-    // see https://www.temboo.com/library/Library/Twitter/Timelines/HomeTimeline/
-    // for complete details about the inputs for this Choreo
-
-    HomeTimelineChoreo.addInput("Count", "1"); // the max number of Tweets to return from each request
-    HomeTimelineChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN);
-    HomeTimelineChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET);
-    HomeTimelineChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY);    
-    HomeTimelineChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET);
-
-    // next, we'll define two output filters that let us specify the 
-    // elements of the response from Twitter that we want to receive.
-    // see the examples at http://www.temboo.com/arduino
-    // for more on using output filters
-   
-    // we want the text of the tweet
-    HomeTimelineChoreo.addOutputFilter("tweet", "/[1]/text", "Response");
-    
-    // and the name of the author
-    HomeTimelineChoreo.addOutputFilter("author", "/[1]/user/screen_name", "Response");
-
-
-    // tell the Process to run and wait for the results. The 
-    // return code will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int returnCode = HomeTimelineChoreo.run();
-    
-   // a response code of 0 means success; print the API response
-    if(returnCode == 0) {
-      
-      String author; // a String to hold the tweet author's name
-      String tweet; // a String to hold the text of the tweet
-
-
-      // choreo outputs are returned as key/value pairs, delimited with 
-      // newlines and record/field terminator characters, for example:
-      // Name1\n\x1F
-      // Value1\n\x1E
-      // Name2\n\x1F
-      // Value2\n\x1E      
-      
-      // see the examples at http://www.temboo.com/arduino for more details
-      // we can read this format into separate variables, as follows:
-      
-      while(HomeTimelineChoreo.available()) {
-        // read the name of the output item
-        String name = HomeTimelineChoreo.readStringUntil('\x1F');
-        name.trim();
-
-        // read the value of the output item
-        String data = HomeTimelineChoreo.readStringUntil('\x1E');
-        data.trim();
-
-        // assign the value to the appropriate String
-        if (name == "tweet") {
-          tweet = data;
-        } else if (name == "author") {
-          author = data;
-        }
-      }
-     
-      Serial.println("@" + author + " - " + tweet);
-    
-    } else {
-      // there was an error
-      // print the raw output from the choreo
-      while(HomeTimelineChoreo.available()) {
-        char c = HomeTimelineChoreo.read();
-        Serial.print(c);
-      }
-    }
-
-    HomeTimelineChoreo.close();
-
-  }
-
-  Serial.println("Waiting...");
-  delay(90000); // wait 90 seconds between HomeTimeline calls
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h
deleted file mode 100644
index c58b447..0000000
--- a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
diff --git a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino b/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino
deleted file mode 100644
index 2e34a82..0000000
--- a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
-  SendATweet
-
-  Demonstrates sending a tweet via a Twitter account using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  In order to run this sketch, you'll need to register an application using
-  the Twitter dev console at https://dev.twitter.com. Note that since this 
-  sketch creates a new tweet, your application will need to be configured with
-  read+write permissions. After creating the app, you'll find OAuth credentials 
-  for that application under the "OAuth Tool" tab. Substitute these values for 
-  the placeholders below. 
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Want to use another social API with your Arduino Yun? We've got Facebook, 
-  Google+, Instagram, Tumblr and more in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token";
-const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret";
-const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key";
-const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret";
-
-int numRuns = 1;   // execution count, so this sketch doesn't run forever
-int maxRuns = 3;  // the max number of times the Twitter Update Choreo should run
-
-void setup() {
-  Serial.begin(9600);
-
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-
-  Bridge.begin();
-}
-
-void loop()
-{
-  // only try to send the tweet if we haven't already sent it successfully
-  if (numRuns <= maxRuns) {
-
-    Serial.println("Running SendATweet - Run #" + String(numRuns++) + "...");
-  
-    // define the text of the tweet we want to send
-    String tweetText("My Arduino Yun has been running for " + String(millis()) + " milliseconds.");
-
-    
-    TembooChoreo StatusesUpdateChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked, and repopulated with
-    // appropriate arguments, each time its run() method is called.
-    StatusesUpdateChoreo.begin();
-    
-    // set Temboo account credentials
-    StatusesUpdateChoreo.setAccountName(TEMBOO_ACCOUNT);
-    StatusesUpdateChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    StatusesUpdateChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // identify the Temboo Library choreo to run (Twitter > Tweets > StatusesUpdate)
-    StatusesUpdateChoreo.setChoreo("/Library/Twitter/Tweets/StatusesUpdate");
-
-    // set the required choreo inputs
-    // see https://www.temboo.com/library/Library/Twitter/Tweets/StatusesUpdate/ 
-    // for complete details about the inputs for this Choreo
- 
-    // add the Twitter account information
-    StatusesUpdateChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN);
-    StatusesUpdateChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET);
-    StatusesUpdateChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY);    
-    StatusesUpdateChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET);
-
-    // and the tweet we want to send
-    StatusesUpdateChoreo.addInput("StatusUpdate", tweetText);
-
-    // tell the Process to run and wait for the results. The 
-    // return code (returnCode) will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int returnCode = StatusesUpdateChoreo.run();
-
-    // a return code of zero (0) means everything worked
-    if (returnCode == 0) {
-        Serial.println("Success! Tweet sent!");
-    } else {
-      // a non-zero return code means there was an error
-      // read and print the error message
-      while (StatusesUpdateChoreo.available()) {
-        char c = StatusesUpdateChoreo.read();
-        Serial.print(c);
-      }
-    } 
-    StatusesUpdateChoreo.close();
-
-    // do nothing for the next 90 seconds
-    Serial.println("Waiting...");
-    delay(90000);
-  }
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h
deleted file mode 100644
index c58b447..0000000
--- a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino b/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino
deleted file mode 100644
index 4f841f8..0000000
--- a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
-  SendAnEmail
-
-  Demonstrates sending an email via a Google Gmail account using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  Since this sketch uses Gmail to send the email, you'll also need a valid 
-  Google Gmail account. The sketch needs the username and password you use 
-  to log into your Gmail account - substitute the placeholders below for these values.
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-  
-  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
-
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-
-// your Gmail username, formatted as a complete email address, eg "bob.smith@gmail.com"
-const String GMAIL_USER_NAME = "xxxxxxxxxx";
-
-// your Gmail password
-const String GMAIL_PASSWORD = "xxxxxxxxxx";
-
-// the email address you want to send the email to, eg "jane.doe@temboo.com"
-const String TO_EMAIL_ADDRESS = "xxxxxxxxxx";
-
-// a flag to indicate whether we've tried to send the email yet or not
-boolean attempted = false; 
-
-void setup() {
-  Serial.begin(9600);
-
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-
-  Bridge.begin();
-}
-
-void loop()
-{
-  // only try to send the email if we haven't already tried
-  if (!attempted) {
-
-    Serial.println("Running SendAnEmail...");
-  
-    TembooChoreo SendEmailChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked, and repopulated with
-    // appropriate arguments, each time its run() method is called.
-    SendEmailChoreo.begin();
-    
-    // set Temboo account credentials
-    SendEmailChoreo.setAccountName(TEMBOO_ACCOUNT);
-    SendEmailChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    SendEmailChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // identify the Temboo Library choreo to run (Google > Gmail > SendEmail)
-    SendEmailChoreo.setChoreo("/Library/Google/Gmail/SendEmail");
- 
-
-    // set the required choreo inputs
-    // see https://www.temboo.com/library/Library/Google/Gmail/SendEmail/ 
-    // for complete details about the inputs for this Choreo
-
-    // the first input is your Gmail email address.     
-    SendEmailChoreo.addInput("Username", GMAIL_USER_NAME);
-    // next is your Gmail password.
-    SendEmailChoreo.addInput("Password", GMAIL_PASSWORD);
-    // who to send the email to
-    SendEmailChoreo.addInput("ToAddress", TO_EMAIL_ADDRESS);
-    // then a subject line
-    SendEmailChoreo.addInput("Subject", "ALERT: Greenhouse Temperature");
-
-     // next comes the message body, the main content of the email   
-    SendEmailChoreo.addInput("MessageBody", "Hey! The greenhouse is too cold!");
-
-    // tell the Choreo to run and wait for the results. The 
-    // return code (returnCode) will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int returnCode = SendEmailChoreo.run();
-
-    // a return code of zero (0) means everything worked
-    if (returnCode == 0) {
-        Serial.println("Success! Email sent!");
-    } else {
-      // a non-zero return code means there was an error
-      // read and print the error message
-      while (SendEmailChoreo.available()) {
-        char c = SendEmailChoreo.read();
-        Serial.print(c);
-      }
-    } 
-    SendEmailChoreo.close();
-    
-    // set the flag showing we've tried
-    attempted = true;
-  }
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h
deleted file mode 100644
index c58b447..0000000
--- a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino b/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino
deleted file mode 100644
index 2b0cfb1..0000000
--- a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
-  SendAnSMS
-
-  Demonstrates sending an SMS via Twilio using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  Since this sketch uses Twilio to send the SMS, you'll also need a valid 
-  Twilio account. You can create one for free at https://www.twilio.com.
- 
-  The sketch needs your Twilio phone number, along with
-  the Account SID and Auth Token you get when you register with Twilio.
-  Make sure to use the Account SID and Auth Token from your Twilio Dashboard 
-  (not your test credentials from the Dev Tools panel).
-
-  Also note that if you're using a free Twilio account, you'll need to verify 
-  the phone number to which messages are being sent by going to twilio.com and following
-  the instructions under the "Numbers > Verified Caller IDs" tab (this restriction
-  doesn't apply if you have a paid Twilio account).
-  
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-
-// the Account SID from your Twilio account
-const String TWILIO_ACCOUNT_SID = "xxxxxxxxxx";
-
-// the Auth Token from your Twilio account
-const String TWILIO_AUTH_TOKEN = "xxxxxxxxxx";
-
-// your Twilio phone number, e.g., "+1 555-222-1212"
-const String TWILIO_NUMBER = "xxxxxxxxxx";
-
-// the number to which the SMS should be sent, e.g., "+1 555-222-1212"
-const String RECIPIENT_NUMBER = "xxxxxxxxxx";
-
-// a flag to indicate whether we've attempted to send the SMS yet or not
-boolean attempted = false; 
-
-void setup() {
-  Serial.begin(9600);
-
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-
-  Bridge.begin();
-}
-
-void loop()
-{
-  // only try to send the SMS if we haven't already sent it successfully
-  if (!attempted) {
-
-    Serial.println("Running SendAnSMS...");
-    
-    // we need a Process object to send a Choreo request to Temboo
-    TembooChoreo SendSMSChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked and repopulated with
-    // appropriate arguments each time its run() method is called.
-    SendSMSChoreo.begin();
-    
-    // set Temboo account credentials
-    SendSMSChoreo.setAccountName(TEMBOO_ACCOUNT);
-    SendSMSChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    SendSMSChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // identify the Temboo Library choreo to run (Twilio > SMSMessages > SendSMS)
-    SendSMSChoreo.setChoreo("/Library/Twilio/SMSMessages/SendSMS");
-
-    // set the required choreo inputs
-    // see https://www.temboo.com/library/Library/Twilio/SMSMessages/SendSMS/ 
-    // for complete details about the inputs for this Choreo
-
-    // the first input is a your AccountSID
-    SendSMSChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID);
-    
-    // next is your Auth Token
-    SendSMSChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN);
- 
-    // next is your Twilio phone number
-    SendSMSChoreo.addInput("From", TWILIO_NUMBER);
-    
-    // next, what number to send the SMS to
-    SendSMSChoreo.addInput("To", RECIPIENT_NUMBER);
-
-    // finally, the text of the message to send
-    SendSMSChoreo.addInput("Body", "Hey, there! This is a message from your Arduino Yun!");
-    
-    // tell the Process to run and wait for the results. The 
-    // return code (returnCode) will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int returnCode = SendSMSChoreo.run();
-
-    // a return code of zero (0) means everything worked
-    if (returnCode == 0) {
-        Serial.println("Success! SMS sent!");
-    } else {
-      // a non-zero return code means there was an error
-      // read and print the error message
-      while (SendSMSChoreo.available()) {
-        char c = SendSMSChoreo.read();
-        Serial.print(c);
-      }
-    } 
-    SendSMSChoreo.close();
-    
-    // set the flag indicatine we've tried once.
-    attempted=true;
-  }
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h
deleted file mode 100644
index 8d7dcfb..0000000
--- a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-
diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino
deleted file mode 100644
index 1f1b6b4..0000000
--- a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
-  SendDataToGoogleSpreadsheet
-
-  Demonstrates appending a row of data to a Google spreadsheet using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  Since this sketch uses a Google spreadsheet, you'll also need a 
-  Google account: substitute the placeholders below for your Google account values.
-
-  This example assumes basic familiarity with Arduino sketches, and that your 
-  Yun is connected to the Internet.
-
-  The columns in your spreadsheet must have labels for the Choreo to
-  work properly. It doesn't matter what the column labels actually are,
-  but there must be text in the first row of each column. This example
-  assumes there are two columns. The first column is the time (in milliseconds)
-  that the row was appended, and the second column is a sensor value.
-  In other words, your spreadsheet should look like:
-  
-  Time  |  Sensor Value  |     
-  ------+-----------------
-        |                |
-  
-  NOTE that the first time you run this sketch, you may receive a warning from
-  Google, prompting you to authorize access from a 3rd party system.
-  
-  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
-
-  This example code is in the public domain.
-
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information, 
-                           // as described in the footer comment below
-
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-
-const String GOOGLE_USERNAME = "your-google-username";
-const String GOOGLE_PASSWORD = "your-google-password";
-
-// the title of the spreadsheet you want to send data to
-// (Note that this must actually be the title of a Google spreadsheet
-// that exists in your Google Drive/Docs account, and is configured
-// as described above.)
-const String SPREADSHEET_TITLE = "your-spreadsheet-title";
-
-const unsigned long RUN_INTERVAL_MILLIS = 60000; // how often to run the Choreo (in milliseconds)
-
-// the last time we ran the Choreo 
-// (initialized to 60 seconds ago so the
-// Choreo is run immediately when we start up)
-unsigned long lastRun = (unsigned long)-60000;
-
-void setup() {
-  
-  // for debugging, wait until a serial console is connected
-  Serial.begin(9600);
-  delay(4000);
-  while(!Serial);
-
-  Serial.print("Initializing the bridge...");
-  Bridge.begin();
-  Serial.println("Done");
-}
-
-void loop()
-{
-  // get the number of milliseconds this sketch has been running
-  unsigned long now = millis();
-
-  // run again if it's been 60 seconds since we last ran
-  if (now - lastRun >= RUN_INTERVAL_MILLIS) {
-
-    // remember 'now' as the last time we ran the choreo
-    lastRun = now;
-    
-    Serial.println("Getting sensor value...");
-
-    // get the value we want to append to our spreadsheet
-    unsigned long sensorValue = getSensorValue();
-
-    Serial.println("Appending value to spreadsheet...");
-
-    // we need a Process object to send a Choreo request to Temboo
-    TembooChoreo AppendRowChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked and repopulated with
-    // appropriate arguments each time its run() method is called.
-    AppendRowChoreo.begin();
-    
-    // set Temboo account credentials
-    AppendRowChoreo.setAccountName(TEMBOO_ACCOUNT);
-    AppendRowChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    AppendRowChoreo.setAppKey(TEMBOO_APP_KEY);
-    
-    // identify the Temboo Library choreo to run (Google > Spreadsheets > AppendRow)
-    AppendRowChoreo.setChoreo("/Library/Google/Spreadsheets/AppendRow");
-    
-    // set the required Choreo inputs
-    // see https://www.temboo.com/library/Library/Google/Spreadsheets/AppendRow/ 
-    // for complete details about the inputs for this Choreo
-    
-    // your Google username (usually your email address)
-    AppendRowChoreo.addInput("Username", GOOGLE_USERNAME);
-
-    // your Google account password
-    AppendRowChoreo.addInput("Password", GOOGLE_PASSWORD);
-
-    // the title of the spreadsheet you want to append to
-    // NOTE: substitute your own value, retaining the "SpreadsheetTitle:" prefix.
-    AppendRowChoreo.addInput("SpreadsheetTitle", SPREADSHEET_TITLE);
-
-    // convert the time and sensor values to a comma separated string
-    String rowData(now);
-    rowData += ",";
-    rowData += sensorValue;
-
-    // add the RowData input item
-    AppendRowChoreo.addInput("RowData", rowData);
-
-    // run the Choreo and wait for the results
-    // The return code (returnCode) will indicate success or failure 
-    unsigned int returnCode = AppendRowChoreo.run();
-
-    // return code of zero (0) means success
-    if (returnCode == 0) {
-      Serial.println("Success! Appended " + rowData);
-      Serial.println("");
-    } else {
-      // return code of anything other than zero means failure  
-      // read and display any error messages
-      while (AppendRowChoreo.available()) {
-        char c = AppendRowChoreo.read();
-        Serial.print(c);
-      }
-    }
-
-    AppendRowChoreo.close();
-  }
-}
-
-// this function simulates reading the value of a sensor 
-unsigned long getSensorValue() {
-  return analogRead(A0);
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h
deleted file mode 100644
index 8d7dcfb..0000000
--- a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-
diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h
deleted file mode 100644
index 8d7dcfb..0000000
--- a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-
diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino
deleted file mode 100644
index 3b7f1d1..0000000
--- a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
-  ToxicFacilitiesSearch
-  
-  Demonstrates making a request to the Envirofacts API using Temboo from an Arduino Yun.
-  This example retrieves the names and addresses of EPA-regulated facilities in the 
-  Toxins Release Inventory (TRI) database within a given zip code.
-  
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-  
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-// the zip code to search for toxin-emitting facilities
-String US_ZIP_CODE = "11215";
-
-int numRuns = 1;   // execution count, so that this doesn't run forever
-int maxRuns = 10;  // max number of times the Envirofacts FacilitiesSearch Choreo should be run
-
-void setup() {
-  Serial.begin(9600);
-    
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-  Bridge.begin();
-}
-
-void loop()
-{
-  // while we haven't reached the max number of runs...
-  if (numRuns <= maxRuns) {
-      
-    // print status
-    Serial.println("Running ToxicFacilitiesSearch - Run #" + String(numRuns++) + "...");
-
-    // we need a Process object to send a Choreo request to Temboo
-    TembooChoreo FacilitiesSearchByZipChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked and repopulated with
-    // appropriate arguments each time its run() method is called.
-    FacilitiesSearchByZipChoreo.begin();
-        
-    // set Temboo account credentials
-    FacilitiesSearchByZipChoreo.setAccountName(TEMBOO_ACCOUNT);
-    FacilitiesSearchByZipChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    FacilitiesSearchByZipChoreo.setAppKey(TEMBOO_APP_KEY);
-  
-    // identify the Temboo Library choreo to run (EnviroFacts > Toxins > FacilitiesSearchByZip)
-    FacilitiesSearchByZipChoreo.setChoreo("/Library/EnviroFacts/Toxins/FacilitiesSearchByZip");
-        
-    // set choreo inputs; in this case, the US zip code for which to retrieve toxin release data
-    // the Temboo client provides standardized calls to 100+ cloud APIs
-    FacilitiesSearchByZipChoreo.addInput("Zip", US_ZIP_CODE);
-    
-    // specify two output filters, to help simplify the Envirofacts API results.
-    // see the tutorials on using Temboo SDK output filters at http://www.temboo.com/arduino
-    FacilitiesSearchByZipChoreo.addOutputFilter("fac", "FACILITY_NAME", "Response");
-
-    FacilitiesSearchByZipChoreo.addOutputFilter("addr", "STREET_ADDRESS", "Response");
-
-    // run the choreo 
-    unsigned int returnCode = FacilitiesSearchByZipChoreo.run();
-    if (returnCode == 0) {
-      String facilities;
-      String addresses;
-
-      // when the choreo results are available, process them.
-      // the output filters we specified will return comma delimited
-      // lists containing the name and street address of the facilities
-      // located in the specified zip code.
-      while(FacilitiesSearchByZipChoreo.available()) {
-        String name = FacilitiesSearchByZipChoreo.readStringUntil('\x1F');
-        name.trim();
-
-        String data = FacilitiesSearchByZipChoreo.readStringUntil('\x1E');
-        data.trim();
-
-        if (name == "fac") {
-          facilities = data;
-        } else if (name == "addr") {
-          addresses = data;
-        }
-      }
-      FacilitiesSearchByZipChoreo.close();
-      
-      // parse the comma delimited lists of facilities to join the 
-      // name with the address and print it to the serial monitor
-      if (facilities.length() > 0) {
-        int i = -1;
-        int facilityStart = 0;
-        int addressStart = 0;
-        String facility;
-        String address;
-        do {
-          i = facilities.indexOf(',', facilityStart);
-          if (i >= 0) {
-            facility = facilities.substring(facilityStart, i);
-            facilityStart = i + 1;
-          }
-
-          i = addresses.indexOf(',', addressStart);
-          if (i >= 0) {
-            address = addresses.substring(addressStart, i);
-            addressStart = i + 1;
-          }
-          
-          if (i >= 0) {
-            printResult(facility, address);
-          }
-
-        }while (i >= 0);
-        facility = facilities.substring(facilityStart);
-        address = addresses.substring(addressStart);
-        printResult(facility, address);
-      } else {
-        Serial.println("No facilities found in zip code " + US_ZIP_CODE);
-      }
-    } else {
-      while(FacilitiesSearchByZipChoreo.available()) {
-        char c = FacilitiesSearchByZipChoreo.read();
-        Serial.print(c);
-      }
-    }
-  }
-  Serial.println("Waiting...");
-  Serial.println("");
-  delay(30000); // wait 30 seconds between calls
-}
-
-// a simple utility function, to output the facility name and address in the serial monitor.
-void printResult(String facility, String address) {
-  Serial.print(facility);
-  Serial.print(" - ");
-  Serial.println(address);
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h
deleted file mode 100644
index 8d7dcfb..0000000
--- a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-
diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino
deleted file mode 100644
index dd8cabd..0000000
--- a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
-  UpdateFacebookStatus
-
-  Demonstrates sending a Facebook status update using Temboo from an Arduino Yun.
-
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-  
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  In order to run this sketch, you'll need to register an application using
-  the Facebook dev console at https://developers.facebook.com/apps -- after creating
-  the app, log in to Temboo and visit https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/
-  to use our OAuth Wizard (or OAuth Choreos) to obtain a Facebook access token.
-  Substitute your access token for the placeholder value of FACEBOOK_ACCESS_TOKEN below.
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun 
-  is connected to the Internet.
-  
-  Want to use another social API with your Arduino Yun? We've got Twitter, Google+, 
-  Instagram, Tumblr and more in our Library!
-
-  This example code is in the public domain. 
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information, 
-                           // as described in the footer comment below
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use a #define statement to specify this value in a .h file.
-
-// the Facebook Access Token, which can be obtained using the Temboo OAuth Wizard or Choreos
-const String FACEBOOK_ACCESS_TOKEN = "xxxxxxxxxx";
-
-
-int numRuns = 1;   // execution count, so this sketch doesn't run forever
-int maxRuns = 10;  // the max number of times the Facebook SetStatus Choreo should run
-
-void setup() {
-  Serial.begin(9600);
-  
-  // For debugging, wait until a serial console is connected.
-  delay(4000);
-  while(!Serial);
-  Bridge.begin();
-}
-
-void loop() {
-  // while we haven't reached the max number of runs...
-  if (numRuns <= maxRuns) {
-
-    // print status
-    Serial.println("Running UpdateFacebookStatus - Run #" + String(numRuns++) + "...");
-    
-    // Define the status message we want to post on Facebook; since Facebook
-    // doesn't allow duplicate status messages, we'll include a changing value.
-    String statusMsg = "My Arduino Yun has been running for " + String(millis()) + " milliseconds!";
-
-    // define the Process that will be used to call the "temboo" client                
-    TembooChoreo SetStatusChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked and repopulated with
-    // appropriate arguments each time its run() method is called.
-    SetStatusChoreo.begin();
-    
-    // set Temboo account credentials
-    SetStatusChoreo.setAccountName(TEMBOO_ACCOUNT);
-    SetStatusChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    SetStatusChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // tell the Temboo client which Choreo to run (Facebook > Publishing > SetStatus)
-    SetStatusChoreo.setChoreo("/Library/Facebook/Publishing/SetStatus");
-
-    // set the required choreo inputs
-    // see  https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/
-    // for complete details about the inputs for this Choreo
-    
-    SetStatusChoreo.addInput("AccessToken", FACEBOOK_ACCESS_TOKEN);    
-    SetStatusChoreo.addInput("Message", statusMsg);
-
-
-    // tell the Process to run and wait for the results. The 
-    // return code (returnCode) will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int returnCode = SetStatusChoreo.run();
-    
-    // print the response code and API response.
-    Serial.println("Response code: " + String(returnCode));
-
-    // note that in this case, we're just printing the raw response from Facebook.
-    // see the examples on using Temboo SDK output filters at http://www.temboo.com/arduino
-    // for information on how to filter this data    
-    while(SetStatusChoreo.available()) {
-      char c = SetStatusChoreo.read();
-      Serial.print(c);
-    }
-
-    SetStatusChoreo.close();
-  }
-
-  Serial.println("Waiting...");
-  Serial.println("");
-
-  delay(30000); // wait 30 seconds between SetStatus calls  
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h b/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h
deleted file mode 100644
index 8d7dcfb..0000000
--- a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-#define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-#define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-
diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino b/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino
deleted file mode 100644
index 744dcdb..0000000
--- a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
-  UploadToDropbox
-  
-  Demonstrates uploading a file to a Dropbox account using Temboo from an Arduino Yun.
-  
-  Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  You'll also need a valid Dropbox app and accompanying OAuth credentials. 
-  To create a Dropbox app, visit https://www.dropbox.com/developers/apps and 
-  do the following:
-  
-  1. Create a "Dropbox API app"
-  2. Select "Files and datastores"
-  3. Select "Yes - my app only needs access to the files it creates."
-  
-  Once you've created your app, follow the instructions at 
-  https://www.temboo.com/library/Library/Dropbox/OAuth/ to run the Initialize and Finalize
-  OAuth Choreos. These Choreos complete the OAuth handshake and retrieve your Dropbox OAuth access tokens.
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet.
-
-  Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Temboo.h>
-#include "TembooAccount.h" // contains Temboo account information
-                           // as described in the footer comment below
-
-
-/*** SUBSTITUTE YOUR VALUES BELOW: ***/
-
-// Note that for additional security and reusability, you could
-// use #define statements to specify these values in a .h file.
-
-// your Dropbox app key, available on the Dropbox developer console after registering an app
-const String DROPBOX_APP_KEY = "xxxxxxxxxx";
-
-// your Dropbox app secret, available on the Dropbox developer console after registering an app 
-const String DROPBOX_APP_SECRET = "xxxxxxxxxx";
-
-// your Dropbox access token, which is returned by the FinalizeOAuth Choreo
-const String DROPBOX_ACCESS_TOKEN = "xxxxxxxxxx";
-
-// your Dropbox access token secret, which is returned by the FinalizeOAuth Choreo
-const String DROPBOX_ACCESS_TOKEN_SECRET = "xxxxxxxxxx";
-
-
-boolean success = false; // a flag to indicate whether we've uploaded the file yet
-
-void setup() {
-  Serial.begin(9600);
-  
-  // For debugging, wait until a serial console is connected.
-  delay(4000);
-  while(!Serial);
-  Bridge.begin();
-}
-
-void loop()
-{
-  // only try to upload the file if we haven't already done so
-  if (!success) {
-    
-    Serial.println("Base64 encoding data to upload...");
-    
-    // base64 encode the data to upload
-    String base64EncodedData = base64Encode("Hello, Arduino!");
-
-
-    Serial.println("Uploading data to Dropbox...");
-
-    // we need a Process object to send a Choreo request to Temboo    
-    TembooChoreo UploadFileChoreo;
-
-    // invoke the Temboo client
-    // NOTE that the client must be reinvoked and repopulated with
-    // appropriate arguments each time its run() method is called.
-    UploadFileChoreo.begin();
-    
-    // set Temboo account credentials
-    UploadFileChoreo.setAccountName(TEMBOO_ACCOUNT);
-    UploadFileChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    UploadFileChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // identify the Temboo Library choreo to run (Dropbox > FilesAndMetadata > UploadFile)
-    UploadFileChoreo.setChoreo("/Library/Dropbox/FilesAndMetadata/UploadFile");
-    
-    // set the required choreo inputs
-    // see https://www.temboo.com/library/Library/Dropbox/FilesAndMetadata/UploadFile/
-    // for complete details about the inputs for this Choreo
-
-    // first specify the name of the file to create/update on Dropbox
-    UploadFileChoreo.addInput("FileName", "ArduinoTest.txt");
-
-    // next, the root folder on Dropbox relative to which the file path is specified.
-    // to work with the Dropbox app you created earlier, this should be left as "sandbox"
-    // if your Dropbox app has full access to your files, specify "dropbox"
-    UploadFileChoreo.addInput("Root","sandbox");
-
-    // next, the Base64 encoded file data to upload
-    UploadFileChoreo.addInput("FileContents", base64EncodedData);
-   
-    // finally, the Dropbox OAuth credentials defined above
-    UploadFileChoreo.addInput("AppSecret", DROPBOX_APP_SECRET);
-    UploadFileChoreo.addInput("AccessToken", DROPBOX_ACCESS_TOKEN);
-    UploadFileChoreo.addInput("AccessTokenSecret", DROPBOX_ACCESS_TOKEN_SECRET);
-    UploadFileChoreo.addInput("AppKey", DROPBOX_APP_KEY);
-
-    // tell the Process to run and wait for the results. The 
-    // return code (returnCode) will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int returnCode = UploadFileChoreo.run();
-
-    // a return code of zero (0) means everything worked
-    if (returnCode == 0) {
-        Serial.println("Success! File uploaded!");
-        success = true;
-    } else {
-      // a non-zero return code means there was an error
-      Serial.println("Uh-oh! Something went wrong!");
-    }
-    
-    // print out the full response to the serial monitor in all
-    // cases, just for debugging
-    while (UploadFileChoreo.available()) {
-      char c = UploadFileChoreo.read();
-      Serial.print(c);
-    }
-    UploadFileChoreo.close();
-
-    Serial.println("Waiting...");
-  }
-
-  delay(30000); // wait 30 seconds between upload attempts
-}
-
-
-/*
-  A utility function to Base64 encode the specified string
-  by calling a Temboo Utilities Choreo.
-*/
-String base64Encode(String toEncode) {
-  
-    // we need a Process object to send a Choreo request to Temboo
-    TembooChoreo Base64EncodeChoreo;
-
-    // invoke the Temboo client
-    Base64EncodeChoreo.begin();
-    
-    // set Temboo account credentials
-    Base64EncodeChoreo.setAccountName(TEMBOO_ACCOUNT);
-    Base64EncodeChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
-    Base64EncodeChoreo.setAppKey(TEMBOO_APP_KEY);
-
-    // identify the Temboo Library choreo to run (Utilities > Encoding > Base64Encode)
-    Base64EncodeChoreo.setChoreo("/Library/Utilities/Encoding/Base64Encode");
- 
-     // set choreo inputs
-    Base64EncodeChoreo.addInput("Text", toEncode);
-    
-    // run the choreo
-    Base64EncodeChoreo.run();
-    
-    // read in the choreo results, and return the "Base64EncodedText" output value.
-    // see http://www.temboo.com/arduino for more details on using choreo outputs.
-    while(Base64EncodeChoreo.available()) {
-      // read the name of the output item
-      String name = Base64EncodeChoreo.readStringUntil('\x1F');
-      name.trim();
-
-      // read the value of the output item
-      String data = Base64EncodeChoreo.readStringUntil('\x1E');
-      data.trim();
-
-      if(name == "Base64EncodedText") {
-        return data;
-      }
-    }
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
-  You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
-  by inserting your own Temboo account name and app key information. The contents of the file should
-  look like:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  You can find your Temboo App Key information on the Temboo website, 
-  under My Account > Application Keys
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Keeping your account information in a separate file means you can share the main .ino file without worrying 
-  that you forgot to delete your credentials.
-*/
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino b/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino
deleted file mode 100644
index 2149737..0000000
--- a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-  Temperature web interface
- 
- This example shows how to serve data from an analog input  
- via the Arduino Yún's built-in webserver using the Bridge library.
- 	
- The circuit:
- * TMP36 temperature sensor on analog pin A1
- * SD card attached to SD card slot of the Arduino Yún
- 
- Prepare your SD card with an empty folder in the SD root 
- named "arduino" and a subfolder of that named "www". 
- This will ensure that the Yún will create a link 
- to the SD to the "/mnt/sd" path.
- 
- In this sketch folder is a basic webpage and a copy of zepto.js, a 
- minimized version of jQuery.  When you upload your sketch, these files
- will be placed in the /arduino/www/TemperatureWebPanel folder on your SD card.
- 
- You can then go to http://arduino.local/sd/TemperatureWebPanel
- to see the output of this sketch.
- 
- You can remove the SD card while the Linux and the 
- sketch are running but be careful not to remove it while
- the system is writing to it.
- 
- created  6 July 2013
- by Tom Igoe
- 
- 
- This example code is in the public domain.
- 	 
- */
-#include <Bridge.h>
-#include <YunServer.h>
-#include <YunClient.h> 
-
-// Listen on default port 5555, the webserver on the Yun
-// will forward there all the HTTP requests for us.
-YunServer server;
-String startString;
-long hits = 0;
-
-void setup() {
-  Serial.begin(9600);
-
-  // Bridge startup
-  pinMode(13,OUTPUT);
-  digitalWrite(13, LOW);
-  Bridge.begin();
-  digitalWrite(13, HIGH);
-
-  // using A0 and A2 as vcc and gnd for the TMP36 sensor:
-  pinMode(A0, OUTPUT);
-  pinMode(A2, OUTPUT);
-  digitalWrite(A0, HIGH);
-  digitalWrite(A2, LOW);
-
-  // Listen for incoming connection only from localhost
-  // (no one from the external network could connect)
-  server.listenOnLocalhost();
-  server.begin();
-
-  // get the time that this sketch started:
-  Process startTime;
-  startTime.runShellCommand("date");
-  while(startTime.available()) {
-    char c = startTime.read();
-    startString += c;
-  }
-}
-
-void loop() {
-  // Get clients coming from server
-  YunClient client = server.accept();
-
-  // There is a new client?
-  if (client) {
-    // read the command
-    String command = client.readString();
-    command.trim();        //kill whitespace
-    Serial.println(command);
-    // is "temperature" command?
-    if (command == "temperature") {
-
-      // get the time from the server:
-      Process time;
-      time.runShellCommand("date");
-      String timeString = "";
-      while(time.available()) {
-        char c = time.read();
-        timeString += c;
-      }
-      Serial.println(timeString);
-      int sensorValue = analogRead(A1);
-      // convert the reading to millivolts:
-      float voltage = sensorValue *  (5000/ 1024); 
-      // convert the millivolts to temperature celsius:
-      float temperature = (voltage - 500)/10;
-      // print the temperature:
-      client.print("Current time on the Yún: ");
-      client.println(timeString);
-      client.print("<br>Current temperature: ");
-      client.print(temperature);
-      client.print(" degrees C");
-      client.print("<br>This sketch has been running since ");
-      client.print(startString);
-      client.print("<br>Hits so far: ");
-      client.print(hits);
-    }
-
-    // Close connection and free resources.
-    client.stop();
-    hits++;
-  }
-
-  delay(50); // Poll every 50ms
-}
-
-
-
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/www/index.html b/libraries/Bridge/examples/TemperatureWebPanel/www/index.html
deleted file mode 100755
index c6b6747..0000000
--- a/libraries/Bridge/examples/TemperatureWebPanel/www/index.html
+++ /dev/null
@@ -1,16 +0,0 @@
-<!DOCTYPE html>
-<html>
-	<head>
-	<script type="text/javascript" src="zepto.min.js"></script>
-	  <script type="text/javascript">
-	   	function refresh() {
-		  	$('#content').load('/arduino/temperature');
-	  	}
-</script>
-
-	</head>
-	<body onload="setInterval(refresh, 2000);">
-		<span id="content">0</span>
-	</body>
-</html>
-
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js b/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js
deleted file mode 100755
index dbe4e3c..0000000
--- a/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js
+++ /dev/null
@@ -1,2 +0,0 @@
-/* Zepto v1.0-1-ga3cab6c - polyfill zepto detect event ajax form fx - zeptojs.com/license */
-(function(a){String.prototype.trim===a&&(String.prototype.trim=function(){return this.replace(/^\s+|\s+$/g,"")}),Array.prototype.reduce===a&&(Array.prototype.reduce=function(b){if(this===void 0||this===null)throw new TypeError;var c=Object(this),d=c.length>>>0,e=0,f;if(typeof b!="function")throw new TypeError;if(d==0&&arguments.length==1)throw new TypeError;if(arguments.length>=2)f=arguments[1];else do{if(e in c){f=c[e++];break}if(++e>=d)throw new TypeError}while(!0);while(e<d)e in c&&(f=b.call(a,f,c[e],e,c)),e++;return f})})();var Zepto=function(){function E(a){return a==null?String(a):y[z.call(a)]||"object"}function F(a){return E(a)=="function"}function G(a){return a!=null&&a==a.window}function H(a){return a!=null&&a.nodeType==a.DOCUMENT_NODE}function I(a){return E(a)=="object"}function J(a){return I(a)&&!G(a)&&a.__proto__==Object.prototype}function K(a){return a instanceof Array}function L(a){return typeof a.length=="number"}function M(a){return g.call(a,function(a){return a!=null})}function N(a){return a.length>0?c.fn.concat.apply([],a):a}function O(a){return a.replace(/::/g,"/").replace(/([A-Z]+)([A-Z][a-z])/g,"$1_$2").replace(/([a-z\d])([A-Z])/g,"$1_$2").replace(/_/g,"-").toLowerCase()}function P(a){return a in j?j[a]:j[a]=new RegExp("(^|\\s)"+a+"(\\s|$)")}function Q(a,b){return typeof b=="number"&&!l[O(a)]?b+"px":b}function R(a){var b,c;return i[a]||(b=h.createElement(a),h.body.appendChild(b),c=k(b,"").getPropertyValue("display"),b.parentNode.removeChild(b),c=="none"&&(c="block"),i[a]=c),i[a]}function S(a){return"children"in a?f.call(a.children):c.map(a.childNodes,function(a){if(a.nodeType==1)return a})}function T(c,d,e){for(b in d)e&&(J(d[b])||K(d[b]))?(J(d[b])&&!J(c[b])&&(c[b]={}),K(d[b])&&!K(c[b])&&(c[b]=[]),T(c[b],d[b],e)):d[b]!==a&&(c[b]=d[b])}function U(b,d){return d===a?c(b):c(b).filter(d)}function V(a,b,c,d){return F(b)?b.call(a,c,d):b}function W(a,b,c){c==null?a.removeAttribute(b):a.setAttribute(b,c)}function X(b,c){var d=b.className,e=d&&d.baseVal!==a;if(c===a)return e?d.baseVal:d;e?d.baseVal=c:b.className=c}function Y(a){var b;try{return a?a=="true"||(a=="false"?!1:a=="null"?null:isNaN(b=Number(a))?/^[\[\{]/.test(a)?c.parseJSON(a):a:b):a}catch(d){return a}}function Z(a,b){b(a);for(var c in a.childNodes)Z(a.childNodes[c],b)}var a,b,c,d,e=[],f=e.slice,g=e.filter,h=window.document,i={},j={},k=h.defaultView.getComputedStyle,l={"column-count":1,columns:1,"font-weight":1,"line-height":1,opacity:1,"z-index":1,zoom:1},m=/^\s*<(\w+|!)[^>]*>/,n=/<(?!area|br|col|embed|hr|img|input|link|meta|param)(([\w:]+)[^>]*)\/>/ig,o=/^(?:body|html)$/i,p=["val","css","html","text","data","width","height","offset"],q=["after","prepend","before","append"],r=h.createElement("table"),s=h.createElement("tr"),t={tr:h.createElement("tbody"),tbody:r,thead:r,tfoot:r,td:s,th:s,"*":h.createElement("div")},u=/complete|loaded|interactive/,v=/^\.([\w-]+)$/,w=/^#([\w-]*)$/,x=/^[\w-]+$/,y={},z=y.toString,A={},B,C,D=h.createElement("div");return A.matches=function(a,b){if(!a||a.nodeType!==1)return!1;var c=a.webkitMatchesSelector||a.mozMatchesSelector||a.oMatchesSelector||a.matchesSelector;if(c)return c.call(a,b);var d,e=a.parentNode,f=!e;return f&&(e=D).appendChild(a),d=~A.qsa(e,b).indexOf(a),f&&D.removeChild(a),d},B=function(a){return a.replace(/-+(.)?/g,function(a,b){return b?b.toUpperCase():""})},C=function(a){return g.call(a,function(b,c){return a.indexOf(b)==c})},A.fragment=function(b,d,e){b.replace&&(b=b.replace(n,"<$1></$2>")),d===a&&(d=m.test(b)&&RegExp.$1),d in t||(d="*");var g,h,i=t[d];return i.innerHTML=""+b,h=c.each(f.call(i.childNodes),function(){i.removeChild(this)}),J(e)&&(g=c(h),c.each(e,function(a,b){p.indexOf(a)>-1?g[a](b):g.attr(a,b)})),h},A.Z=function(a,b){return a=a||[],a.__proto__=c.fn,a.selector=b||"",a},A.isZ=function(a){return a instanceof A.Z},A.init=function(b,d){if(!b)return A.Z();if(F(b))return c(h).ready(b);if(A.isZ(b))return b;var e;if(K(b))e=M(b);else if(I(b))e=[J(b)?c.extend({},b):b],b=null;else if(m.test(b))e=A.fragment(b.trim(),RegExp.$1,d),b=null;else{if(d!==a)return c(d).find(b);e=A.qsa(h,b)}return A.Z(e,b)},c=function(a,b){return A.init(a,b)},c.extend=function(a){var b,c=f.call(arguments,1);return typeof a=="boolean"&&(b=a,a=c.shift()),c.forEach(function(c){T(a,c,b)}),a},A.qsa=function(a,b){var c;return H(a)&&w.test(b)?(c=a.getElementById(RegExp.$1))?[c]:[]:a.nodeType!==1&&a.nodeType!==9?[]:f.call(v.test(b)?a.getElementsByClassName(RegExp.$1):x.test(b)?a.getElementsByTagName(b):a.querySelectorAll(b))},c.contains=function(a,b){return a!==b&&a.contains(b)},c.type=E,c.isFunction=F,c.isWindow=G,c.isArray=K,c.isPlainObject=J,c.isEmptyObject=function(a){var b;for(b in a)return!1;return!0},c.inArray=function(a,b,c){return e.indexOf.call(b,a,c)},c.camelCase=B,c.trim=function(a){return a.trim()},c.uuid=0,c.support={},c.expr={},c.map=function(a,b){var c,d=[],e,f;if(L(a))for(e=0;e<a.length;e++)c=b(a[e],e),c!=null&&d.push(c);else for(f in a)c=b(a[f],f),c!=null&&d.push(c);return N(d)},c.each=function(a,b){var c,d;if(L(a)){for(c=0;c<a.length;c++)if(b.call(a[c],c,a[c])===!1)return a}else for(d in a)if(b.call(a[d],d,a[d])===!1)return a;return a},c.grep=function(a,b){return g.call(a,b)},window.JSON&&(c.parseJSON=JSON.parse),c.each("Boolean Number String Function Array Date RegExp Object Error".split(" "),function(a,b){y["[object "+b+"]"]=b.toLowerCase()}),c.fn={forEach:e.forEach,reduce:e.reduce,push:e.push,sort:e.sort,indexOf:e.indexOf,concat:e.concat,map:function(a){return c(c.map(this,function(b,c){return a.call(b,c,b)}))},slice:function(){return c(f.apply(this,arguments))},ready:function(a){return u.test(h.readyState)?a(c):h.addEventListener("DOMContentLoaded",function(){a(c)},!1),this},get:function(b){return b===a?f.call(this):this[b>=0?b:b+this.length]},toArray:function(){return this.get()},size:function(){return this.length},remove:function(){return this.each(function(){this.parentNode!=null&&this.parentNode.removeChild(this)})},each:function(a){return e.every.call(this,function(b,c){return a.call(b,c,b)!==!1}),this},filter:function(a){return F(a)?this.not(this.not(a)):c(g.call(this,function(b){return A.matches(b,a)}))},add:function(a,b){return c(C(this.concat(c(a,b))))},is:function(a){return this.length>0&&A.matches(this[0],a)},not:function(b){var d=[];if(F(b)&&b.call!==a)this.each(function(a){b.call(this,a)||d.push(this)});else{var e=typeof b=="string"?this.filter(b):L(b)&&F(b.item)?f.call(b):c(b);this.forEach(function(a){e.indexOf(a)<0&&d.push(a)})}return c(d)},has:function(a){return this.filter(function(){return I(a)?c.contains(this,a):c(this).find(a).size()})},eq:function(a){return a===-1?this.slice(a):this.slice(a,+a+1)},first:function(){var a=this[0];return a&&!I(a)?a:c(a)},last:function(){var a=this[this.length-1];return a&&!I(a)?a:c(a)},find:function(a){var b,d=this;return typeof a=="object"?b=c(a).filter(function(){var a=this;return e.some.call(d,function(b){return c.contains(b,a)})}):this.length==1?b=c(A.qsa(this[0],a)):b=this.map(function(){return A.qsa(this,a)}),b},closest:function(a,b){var d=this[0],e=!1;typeof a=="object"&&(e=c(a));while(d&&!(e?e.indexOf(d)>=0:A.matches(d,a)))d=d!==b&&!H(d)&&d.parentNode;return c(d)},parents:function(a){var b=[],d=this;while(d.length>0)d=c.map(d,function(a){if((a=a.parentNode)&&!H(a)&&b.indexOf(a)<0)return b.push(a),a});return U(b,a)},parent:function(a){return U(C(this.pluck("parentNode")),a)},children:function(a){return U(this.map(function(){return S(this)}),a)},contents:function(){return this.map(function(){return f.call(this.childNodes)})},siblings:function(a){return U(this.map(function(a,b){return g.call(S(b.parentNode),function(a){return a!==b})}),a)},empty:function(){return this.each(function(){this.innerHTML=""})},pluck:function(a){return c.map(this,function(b){return b[a]})},show:function(){return this.each(function(){this.style.display=="none"&&(this.style.display=null),k(this,"").getPropertyValue("display")=="none"&&(this.style.display=R(this.nodeName))})},replaceWith:function(a){return this.before(a).remove()},wrap:function(a){var b=F(a);if(this[0]&&!b)var d=c(a).get(0),e=d.parentNode||this.length>1;return this.each(function(f){c(this).wrapAll(b?a.call(this,f):e?d.cloneNode(!0):d)})},wrapAll:function(a){if(this[0]){c(this[0]).before(a=c(a));var b;while((b=a.children()).length)a=b.first();c(a).append(this)}return this},wrapInner:function(a){var b=F(a);return this.each(function(d){var e=c(this),f=e.contents(),g=b?a.call(this,d):a;f.length?f.wrapAll(g):e.append(g)})},unwrap:function(){return this.parent().each(function(){c(this).replaceWith(c(this).children())}),this},clone:function(){return this.map(function(){return this.cloneNode(!0)})},hide:function(){return this.css("display","none")},toggle:function(b){return this.each(function(){var d=c(this);(b===a?d.css("display")=="none":b)?d.show():d.hide()})},prev:function(a){return c(this.pluck("previousElementSibling")).filter(a||"*")},next:function(a){return c(this.pluck("nextElementSibling")).filter(a||"*")},html:function(b){return b===a?this.length>0?this[0].innerHTML:null:this.each(function(a){var d=this.innerHTML;c(this).empty().append(V(this,b,a,d))})},text:function(b){return b===a?this.length>0?this[0].textContent:null:this.each(function(){this.textContent=b})},attr:function(c,d){var e;return typeof c=="string"&&d===a?this.length==0||this[0].nodeType!==1?a:c=="value"&&this[0].nodeName=="INPUT"?this.val():!(e=this[0].getAttribute(c))&&c in this[0]?this[0][c]:e:this.each(function(a){if(this.nodeType!==1)return;if(I(c))for(b in c)W(this,b,c[b]);else W(this,c,V(this,d,a,this.getAttribute(c)))})},removeAttr:function(a){return this.each(function(){this.nodeType===1&&W(this,a)})},prop:function(b,c){return c===a?this[0]&&this[0][b]:this.each(function(a){this[b]=V(this,c,a,this[b])})},data:function(b,c){var d=this.attr("data-"+O(b),c);return d!==null?Y(d):a},val:function(b){return b===a?this[0]&&(this[0].multiple?c(this[0]).find("option").filter(function(a){return this.selected}).pluck("value"):this[0].value):this.each(function(a){this.value=V(this,b,a,this.value)})},offset:function(a){if(a)return this.each(function(b){var d=c(this),e=V(this,a,b,d.offset()),f=d.offsetParent().offset(),g={top:e.top-f.top,left:e.left-f.left};d.css("position")=="static"&&(g.position="relative"),d.css(g)});if(this.length==0)return null;var b=this[0].getBoundingClientRect();return{left:b.left+window.pageXOffset,top:b.top+window.pageYOffset,width:Math.round(b.width),height:Math.round(b.height)}},css:function(a,c){if(arguments.length<2&&typeof a=="string")return this[0]&&(this[0].style[B(a)]||k(this[0],"").getPropertyValue(a));var d="";if(E(a)=="string")!c&&c!==0?this.each(function(){this.style.removeProperty(O(a))}):d=O(a)+":"+Q(a,c);else for(b in a)!a[b]&&a[b]!==0?this.each(function(){this.style.removeProperty(O(b))}):d+=O(b)+":"+Q(b,a[b])+";";return this.each(function(){this.style.cssText+=";"+d})},index:function(a){return a?this.indexOf(c(a)[0]):this.parent().children().indexOf(this[0])},hasClass:function(a){return e.some.call(this,function(a){return this.test(X(a))},P(a))},addClass:function(a){return this.each(function(b){d=[];var e=X(this),f=V(this,a,b,e);f.split(/\s+/g).forEach(function(a){c(this).hasClass(a)||d.push(a)},this),d.length&&X(this,e+(e?" ":"")+d.join(" "))})},removeClass:function(b){return this.each(function(c){if(b===a)return X(this,"");d=X(this),V(this,b,c,d).split(/\s+/g).forEach(function(a){d=d.replace(P(a)," ")}),X(this,d.trim())})},toggleClass:function(b,d){return this.each(function(e){var f=c(this),g=V(this,b,e,X(this));g.split(/\s+/g).forEach(function(b){(d===a?!f.hasClass(b):d)?f.addClass(b):f.removeClass(b)})})},scrollTop:function(){if(!this.length)return;return"scrollTop"in this[0]?this[0].scrollTop:this[0].scrollY},position:function(){if(!this.length)return;var a=this[0],b=this.offsetParent(),d=this.offset(),e=o.test(b[0].nodeName)?{top:0,left:0}:b.offset();return d.top-=parseFloat(c(a).css("margin-top"))||0,d.left-=parseFloat(c(a).css("margin-left"))||0,e.top+=parseFloat(c(b[0]).css("border-top-width"))||0,e.left+=parseFloat(c(b[0]).css("border-left-width"))||0,{top:d.top-e.top,left:d.left-e.left}},offsetParent:function(){return this.map(function(){var a=this.offsetParent||h.body;while(a&&!o.test(a.nodeName)&&c(a).css("position")=="static")a=a.offsetParent;return a})}},c.fn.detach=c.fn.remove,["width","height"].forEach(function(b){c.fn[b]=function(d){var e,f=this[0],g=b.replace(/./,function(a){return a[0].toUpperCase()});return d===a?G(f)?f["inner"+g]:H(f)?f.documentElement["offset"+g]:(e=this.offset())&&e[b]:this.each(function(a){f=c(this),f.css(b,V(this,d,a,f[b]()))})}}),q.forEach(function(a,b){var d=b%2;c.fn[a]=function(){var a,e=c.map(arguments,function(b){return a=E(b),a=="object"||a=="array"||b==null?b:A.fragment(b)}),f,g=this.length>1;return e.length<1?this:this.each(function(a,h){f=d?h:h.parentNode,h=b==0?h.nextSibling:b==1?h.firstChild:b==2?h:null,e.forEach(function(a){if(g)a=a.cloneNode(!0);else if(!f)return c(a).remove();Z(f.insertBefore(a,h),function(a){a.nodeName!=null&&a.nodeName.toUpperCase()==="SCRIPT"&&(!a.type||a.type==="text/javascript")&&!a.src&&window.eval.call(window,a.innerHTML)})})})},c.fn[d?a+"To":"insert"+(b?"Before":"After")]=function(b){return c(b)[a](this),this}}),A.Z.prototype=c.fn,A.uniq=C,A.deserializeValue=Y,c.zepto=A,c}();window.Zepto=Zepto,"$"in window||(window.$=Zepto),function(a){function b(a){var b=this.os={},c=this.browser={},d=a.match(/WebKit\/([\d.]+)/),e=a.match(/(Android)\s+([\d.]+)/),f=a.match(/(iPad).*OS\s([\d_]+)/),g=!f&&a.match(/(iPhone\sOS)\s([\d_]+)/),h=a.match(/(webOS|hpwOS)[\s\/]([\d.]+)/),i=h&&a.match(/TouchPad/),j=a.match(/Kindle\/([\d.]+)/),k=a.match(/Silk\/([\d._]+)/),l=a.match(/(BlackBerry).*Version\/([\d.]+)/),m=a.match(/(BB10).*Version\/([\d.]+)/),n=a.match(/(RIM\sTablet\sOS)\s([\d.]+)/),o=a.match(/PlayBook/),p=a.match(/Chrome\/([\d.]+)/)||a.match(/CriOS\/([\d.]+)/),q=a.match(/Firefox\/([\d.]+)/);if(c.webkit=!!d)c.version=d[1];e&&(b.android=!0,b.version=e[2]),g&&(b.ios=b.iphone=!0,b.version=g[2].replace(/_/g,".")),f&&(b.ios=b.ipad=!0,b.version=f[2].replace(/_/g,".")),h&&(b.webos=!0,b.version=h[2]),i&&(b.touchpad=!0),l&&(b.blackberry=!0,b.version=l[2]),m&&(b.bb10=!0,b.version=m[2]),n&&(b.rimtabletos=!0,b.version=n[2]),o&&(c.playbook=!0),j&&(b.kindle=!0,b.version=j[1]),k&&(c.silk=!0,c.version=k[1]),!k&&b.android&&a.match(/Kindle Fire/)&&(c.silk=!0),p&&(c.chrome=!0,c.version=p[1]),q&&(c.firefox=!0,c.version=q[1]),b.tablet=!!(f||o||e&&!a.match(/Mobile/)||q&&a.match(/Tablet/)),b.phone=!b.tablet&&!!(e||g||h||l||m||p&&a.match(/Android/)||p&&a.match(/CriOS\/([\d.]+)/)||q&&a.match(/Mobile/))}b.call(a,navigator.userAgent),a.__detect=b}(Zepto),function(a){function g(a){return a._zid||(a._zid=d++)}function h(a,b,d,e){b=i(b);if(b.ns)var f=j(b.ns);return(c[g(a)]||[]).filter(function(a){return a&&(!b.e||a.e==b.e)&&(!b.ns||f.test(a.ns))&&(!d||g(a.fn)===g(d))&&(!e||a.sel==e)})}function i(a){var b=(""+a).split(".");return{e:b[0],ns:b.slice(1).sort().join(" ")}}function j(a){return new RegExp("(?:^| )"+a.replace(" "," .* ?")+"(?: |$)")}function k(b,c,d){a.type(b)!="string"?a.each(b,d):b.split(/\s/).forEach(function(a){d(a,c)})}function l(a,b){return a.del&&(a.e=="focus"||a.e=="blur")||!!b}function m(a){return f[a]||a}function n(b,d,e,h,j,n){var o=g(b),p=c[o]||(c[o]=[]);k(d,e,function(c,d){var e=i(c);e.fn=d,e.sel=h,e.e in f&&(d=function(b){var c=b.relatedTarget;if(!c||c!==this&&!a.contains(this,c))return e.fn.apply(this,arguments)}),e.del=j&&j(d,c);var g=e.del||d;e.proxy=function(a){var c=g.apply(b,[a].concat(a.data));return c===!1&&(a.preventDefault(),a.stopPropagation()),c},e.i=p.length,p.push(e),b.addEventListener(m(e.e),e.proxy,l(e,n))})}function o(a,b,d,e,f){var i=g(a);k(b||"",d,function(b,d){h(a,b,d,e).forEach(function(b){delete c[i][b.i],a.removeEventListener(m(b.e),b.proxy,l(b,f))})})}function t(b){var c,d={originalEvent:b};for(c in b)!r.test(c)&&b[c]!==undefined&&(d[c]=b[c]);return a.each(s,function(a,c){d[a]=function(){return this[c]=p,b[a].apply(b,arguments)},d[c]=q}),d}function u(a){if(!("defaultPrevented"in a)){a.defaultPrevented=!1;var b=a.preventDefault;a.preventDefault=function(){this.defaultPrevented=!0,b.call(this)}}}var b=a.zepto.qsa,c={},d=1,e={},f={mouseenter:"mouseover",mouseleave:"mouseout"};e.click=e.mousedown=e.mouseup=e.mousemove="MouseEvents",a.event={add:n,remove:o},a.proxy=function(b,c){if(a.isFunction(b)){var d=function(){return b.apply(c,arguments)};return d._zid=g(b),d}if(typeof c=="string")return a.proxy(b[c],b);throw new TypeError("expected function")},a.fn.bind=function(a,b){return this.each(function(){n(this,a,b)})},a.fn.unbind=function(a,b){return this.each(function(){o(this,a,b)})},a.fn.one=function(a,b){return this.each(function(c,d){n(this,a,b,null,function(a,b){return function(){var c=a.apply(d,arguments);return o(d,b,a),c}})})};var p=function(){return!0},q=function(){return!1},r=/^([A-Z]|layer[XY]$)/,s={preventDefault:"isDefaultPrevented",stopImmediatePropagation:"isImmediatePropagationStopped",stopPropagation:"isPropagationStopped"};a.fn.delegate=function(b,c,d){return this.each(function(e,f){n(f,c,d,b,function(c){return function(d){var e,g=a(d.target).closest(b,f).get(0);if(g)return e=a.extend(t(d),{currentTarget:g,liveFired:f}),c.apply(g,[e].concat([].slice.call(arguments,1)))}})})},a.fn.undelegate=function(a,b,c){return this.each(function(){o(this,b,c,a)})},a.fn.live=function(b,c){return a(document.body).delegate(this.selector,b,c),this},a.fn.die=function(b,c){return a(document.body).undelegate(this.selector,b,c),this},a.fn.on=function(b,c,d){return!c||a.isFunction(c)?this.bind(b,c||d):this.delegate(c,b,d)},a.fn.off=function(b,c,d){return!c||a.isFunction(c)?this.unbind(b,c||d):this.undelegate(c,b,d)},a.fn.trigger=function(b,c){if(typeof b=="string"||a.isPlainObject(b))b=a.Event(b);return u(b),b.data=c,this.each(function(){"dispatchEvent"in this&&this.dispatchEvent(b)})},a.fn.triggerHandler=function(b,c){var d,e;return this.each(function(f,g){d=t(typeof b=="string"?a.Event(b):b),d.data=c,d.target=g,a.each(h(g,b.type||b),function(a,b){e=b.proxy(d);if(d.isImmediatePropagationStopped())return!1})}),e},"focusin focusout load resize scroll unload click dblclick mousedown mouseup mousemove mouseover mouseout mouseenter mouseleave change select keydown keypress keyup error".split(" ").forEach(function(b){a.fn[b]=function(a){return a?this.bind(b,a):this.trigger(b)}}),["focus","blur"].forEach(function(b){a.fn[b]=function(a){return a?this.bind(b,a):this.each(function(){try{this[b]()}catch(a){}}),this}}),a.Event=function(a,b){typeof a!="string"&&(b=a,a=b.type);var c=document.createEvent(e[a]||"Events"),d=!0;if(b)for(var f in b)f=="bubbles"?d=!!b[f]:c[f]=b[f];return c.initEvent(a,d,!0,null,null,null,null,null,null,null,null,null,null,null,null),c.isDefaultPrevented=function(){return this.defaultPrevented},c}}(Zepto),function($){function triggerAndReturn(a,b,c){var d=$.Event(b);return $(a).trigger(d,c),!d.defaultPrevented}function triggerGlobal(a,b,c,d){if(a.global)return triggerAndReturn(b||document,c,d)}function ajaxStart(a){a.global&&$.active++===0&&triggerGlobal(a,null,"ajaxStart")}function ajaxStop(a){a.global&&!--$.active&&triggerGlobal(a,null,"ajaxStop")}function ajaxBeforeSend(a,b){var c=b.context;if(b.beforeSend.call(c,a,b)===!1||triggerGlobal(b,c,"ajaxBeforeSend",[a,b])===!1)return!1;triggerGlobal(b,c,"ajaxSend",[a,b])}function ajaxSuccess(a,b,c){var d=c.context,e="success";c.success.call(d,a,e,b),triggerGlobal(c,d,"ajaxSuccess",[b,c,a]),ajaxComplete(e,b,c)}function ajaxError(a,b,c,d){var e=d.context;d.error.call(e,c,b,a),triggerGlobal(d,e,"ajaxError",[c,d,a]),ajaxComplete(b,c,d)}function ajaxComplete(a,b,c){var d=c.context;c.complete.call(d,b,a),triggerGlobal(c,d,"ajaxComplete",[b,c]),ajaxStop(c)}function empty(){}function mimeToDataType(a){return a&&(a=a.split(";",2)[0]),a&&(a==htmlType?"html":a==jsonType?"json":scriptTypeRE.test(a)?"script":xmlTypeRE.test(a)&&"xml")||"text"}function appendQuery(a,b){return(a+"&"+b).replace(/[&?]{1,2}/,"?")}function serializeData(a){a.processData&&a.data&&$.type(a.data)!="string"&&(a.data=$.param(a.data,a.traditional)),a.data&&(!a.type||a.type.toUpperCase()=="GET")&&(a.url=appendQuery(a.url,a.data))}function parseArguments(a,b,c,d){var e=!$.isFunction(b);return{url:a,data:e?b:undefined,success:e?$.isFunction(c)?c:undefined:b,dataType:e?d||c:c}}function serialize(a,b,c,d){var e,f=$.isArray(b);$.each(b,function(b,g){e=$.type(g),d&&(b=c?d:d+"["+(f?"":b)+"]"),!d&&f?a.add(g.name,g.value):e=="array"||!c&&e=="object"?serialize(a,g,c,b):a.add(b,g)})}var jsonpID=0,document=window.document,key,name,rscript=/<script\b[^<]*(?:(?!<\/script>)<[^<]*)*<\/script>/gi,scriptTypeRE=/^(?:text|application)\/javascript/i,xmlTypeRE=/^(?:text|application)\/xml/i,jsonType="application/json",htmlType="text/html",blankRE=/^\s*$/;$.active=0,$.ajaxJSONP=function(a){if("type"in a){var b="jsonp"+ ++jsonpID,c=document.createElement("script"),d=function(){clearTimeout(g),$(c).remove(),delete window[b]},e=function(c){d();if(!c||c=="timeout")window[b]=empty;ajaxError(null,c||"abort",f,a)},f={abort:e},g;return ajaxBeforeSend(f,a)===!1?(e("abort"),!1):(window[b]=function(b){d(),ajaxSuccess(b,f,a)},c.onerror=function(){e("error")},c.src=a.url.replace(/=\?/,"="+b),$("head").append(c),a.timeout>0&&(g=setTimeout(function(){e("timeout")},a.timeout)),f)}return $.ajax(a)},$.ajaxSettings={type:"GET",beforeSend:empty,success:empty,error:empty,complete:empty,context:null,global:!0,xhr:function(){return new window.XMLHttpRequest},accepts:{script:"text/javascript, application/javascript",json:jsonType,xml:"application/xml, text/xml",html:htmlType,text:"text/plain"},crossDomain:!1,timeout:0,processData:!0,cache:!0},$.ajax=function(options){var settings=$.extend({},options||{});for(key in $.ajaxSettings)settings[key]===undefined&&(settings[key]=$.ajaxSettings[key]);ajaxStart(settings),settings.crossDomain||(settings.crossDomain=/^([\w-]+:)?\/\/([^\/]+)/.test(settings.url)&&RegExp.$2!=window.location.host),settings.url||(settings.url=window.location.toString()),serializeData(settings),settings.cache===!1&&(settings.url=appendQuery(settings.url,"_="+Date.now()));var dataType=settings.dataType,hasPlaceholder=/=\?/.test(settings.url);if(dataType=="jsonp"||hasPlaceholder)return hasPlaceholder||(settings.url=appendQuery(settings.url,"callback=?")),$.ajaxJSONP(settings);var mime=settings.accepts[dataType],baseHeaders={},protocol=/^([\w-]+:)\/\//.test(settings.url)?RegExp.$1:window.location.protocol,xhr=settings.xhr(),abortTimeout;settings.crossDomain||(baseHeaders["X-Requested-With"]="XMLHttpRequest"),mime&&(baseHeaders.Accept=mime,mime.indexOf(",")>-1&&(mime=mime.split(",",2)[0]),xhr.overrideMimeType&&xhr.overrideMimeType(mime));if(settings.contentType||settings.contentType!==!1&&settings.data&&settings.type.toUpperCase()!="GET")baseHeaders["Content-Type"]=settings.contentType||"application/x-www-form-urlencoded";settings.headers=$.extend(baseHeaders,settings.headers||{}),xhr.onreadystatechange=function(){if(xhr.readyState==4){xhr.onreadystatechange=empty,clearTimeout(abortTimeout);var result,error=!1;if(xhr.status>=200&&xhr.status<300||xhr.status==304||xhr.status==0&&protocol=="file:"){dataType=dataType||mimeToDataType(xhr.getResponseHeader("content-type")),result=xhr.responseText;try{dataType=="script"?(1,eval)(result):dataType=="xml"?result=xhr.responseXML:dataType=="json"&&(result=blankRE.test(result)?null:$.parseJSON(result))}catch(e){error=e}error?ajaxError(error,"parsererror",xhr,settings):ajaxSuccess(result,xhr,settings)}else ajaxError(null,xhr.status?"error":"abort",xhr,settings)}};var async="async"in settings?settings.async:!0;xhr.open(settings.type,settings.url,async);for(name in settings.headers)xhr.setRequestHeader(name,settings.headers[name]);return ajaxBeforeSend(xhr,settings)===!1?(xhr.abort(),!1):(settings.timeout>0&&(abortTimeout=setTimeout(function(){xhr.onreadystatechange=empty,xhr.abort(),ajaxError(null,"timeout",xhr,settings)},settings.timeout)),xhr.send(settings.data?settings.data:null),xhr)},$.get=function(a,b,c,d){return $.ajax(parseArguments.apply(null,arguments))},$.post=function(a,b,c,d){var e=parseArguments.apply(null,arguments);return e.type="POST",$.ajax(e)},$.getJSON=function(a,b,c){var d=parseArguments.apply(null,arguments);return d.dataType="json",$.ajax(d)},$.fn.load=function(a,b,c){if(!this.length)return this;var d=this,e=a.split(/\s/),f,g=parseArguments(a,b,c),h=g.success;return e.length>1&&(g.url=e[0],f=e[1]),g.success=function(a){d.html(f?$("<div>").html(a.replace(rscript,"")).find(f):a),h&&h.apply(d,arguments)},$.ajax(g),this};var escape=encodeURIComponent;$.param=function(a,b){var c=[];return c.add=function(a,b){this.push(escape(a)+"="+escape(b))},serialize(c,a,b),c.join("&").replace(/%20/g,"+")}}(Zepto),function(a){a.fn.serializeArray=function(){var b=[],c;return a(Array.prototype.slice.call(this.get(0).elements)).each(function(){c=a(this);var d=c.attr("type");this.nodeName.toLowerCase()!="fieldset"&&!this.disabled&&d!="submit"&&d!="reset"&&d!="button"&&(d!="radio"&&d!="checkbox"||this.checked)&&b.push({name:c.attr("name"),value:c.val()})}),b},a.fn.serialize=function(){var a=[];return this.serializeArray().forEach(function(b){a.push(encodeURIComponent(b.name)+"="+encodeURIComponent(b.value))}),a.join("&")},a.fn.submit=function(b){if(b)this.bind("submit",b);else if(this.length){var c=a.Event("submit");this.eq(0).trigger(c),c.defaultPrevented||this.get(0).submit()}return this}}(Zepto),function(a,b){function s(a){return t(a.replace(/([a-z])([A-Z])/,"$1-$2"))}function t(a){return a.toLowerCase()}function u(a){return d?d+a:t(a)}var c="",d,e,f,g={Webkit:"webkit",Moz:"",O:"o",ms:"MS"},h=window.document,i=h.createElement("div"),j=/^((translate|rotate|scale)(X|Y|Z|3d)?|matrix(3d)?|perspective|skew(X|Y)?)$/i,k,l,m,n,o,p,q,r={};a.each(g,function(a,e){if(i.style[a+"TransitionProperty"]!==b)return c="-"+t(a)+"-",d=e,!1}),k=c+"transform",r[l=c+"transition-property"]=r[m=c+"transition-duration"]=r[n=c+"transition-timing-function"]=r[o=c+"animation-name"]=r[p=c+"animation-duration"]=r[q=c+"animation-timing-function"]="",a.fx={off:d===b&&i.style.transitionProperty===b,speeds:{_default:400,fast:200,slow:600},cssPrefix:c,transitionEnd:u("TransitionEnd"),animationEnd:u("AnimationEnd")},a.fn.animate=function(b,c,d,e){return a.isPlainObject(c)&&(d=c.easing,e=c.complete,c=c.duration),c&&(c=(typeof c=="number"?c:a.fx.speeds[c]||a.fx.speeds._default)/1e3),this.anim(b,c,d,e)},a.fn.anim=function(c,d,e,f){var g,h={},i,t="",u=this,v,w=a.fx.transitionEnd;d===b&&(d=.4),a.fx.off&&(d=0);if(typeof c=="string")h[o]=c,h[p]=d+"s",h[q]=e||"linear",w=a.fx.animationEnd;else{i=[];for(g in c)j.test(g)?t+=g+"("+c[g]+") ":(h[g]=c[g],i.push(s(g)));t&&(h[k]=t,i.push(k)),d>0&&typeof c=="object"&&(h[l]=i.join(", "),h[m]=d+"s",h[n]=e||"linear")}return v=function(b){if(typeof b!="undefined"){if(b.target!==b.currentTarget)return;a(b.target).unbind(w,v)}a(this).css(r),f&&f.call(this)},d>0&&this.bind(w,v),this.size()&&this.get(0).clientLeft,this.css(h),d<=0&&setTimeout(function(){u.each(function(){v.call(this)})},0),this},i=null}(Zepto)
diff --git a/libraries/Bridge/examples/TimeCheck/TimeCheck.ino b/libraries/Bridge/examples/TimeCheck/TimeCheck.ino
deleted file mode 100644
index 848ff25..0000000
--- a/libraries/Bridge/examples/TimeCheck/TimeCheck.ino
+++ /dev/null
@@ -1,82 +0,0 @@
-
-/*
-  Time Check 
- 
- Gets the time from the linino processor via Bridge
- then parses out hours, minutes and seconds for the Arduino
- using an Arduino Yún. 
- 
- created  27 May 2013
- modified 21 June 2013
- By Tom Igoe 
-
- This example code is in the public domain.
-
- */
-
-
-#include <Process.h>
-
-Process date;                 // process used to get the date
-int hours, minutes, seconds;  // for the results
-int lastSecond = -1;          // need an impossible value for comparison
-
-void setup() {
-  Bridge.begin();        // initialize Bridge
-  Serial.begin(9600);    // initialize serial  
- 
-  while(!Serial);               // wait for Serial Monitor to open
-  Serial.println("Time Check");  // Title of sketch
-
-  // run an initial date process. Should return:
-  // hh:mm:ss :
-  if (!date.running())  {
-    date.begin("date");
-    date.addParameter("+%T");
-    date.run();
-  }
-}
-
-void loop() {
-
-  if(lastSecond != seconds) {  // if a second has passed
-    // print the time:
-    if (hours <= 9) Serial.print("0");    // adjust for 0-9
-    Serial.print(hours);    
-    Serial.print(":");
-    if (minutes <= 9) Serial.print("0");  // adjust for 0-9
-    Serial.print(minutes);
-    Serial.print(":");
-    if (seconds <= 9) Serial.print("0");  // adjust for 0-9
-    Serial.println(seconds);
-
-    // restart the date process:
-    if (!date.running())  {
-      date.begin("date");
-      date.addParameter("+%T");
-      date.run();
-    }
-  }
-
-  //if there's a result from the date process, parse it:
-  while (date.available()>0) {
-    // get the result of the date process (should be hh:mm:ss):
-    String timeString = date.readString();    
-
-    // find the colons:
-    int firstColon = timeString.indexOf(":");
-    int secondColon= timeString.lastIndexOf(":");
-
-    // get the substrings for hour, minute second:
-    String hourString = timeString.substring(0, firstColon); 
-    String minString = timeString.substring(firstColon+1, secondColon);
-    String secString = timeString.substring(secondColon+1);
-
-    // convert to ints,saving the previous second:
-    hours = hourString.toInt();
-    minutes = minString.toInt();
-    lastSecond = seconds;          // save to do a time comparison
-    seconds = secString.toInt();
-  } 
-
-}
diff --git a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino
deleted file mode 100644
index 5921b70..0000000
--- a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino
+++ /dev/null
@@ -1,50 +0,0 @@
-
-/*
- WiFi Status 
- 
- This sketch runs a script called "pretty-wifi-info.lua"
- installed on your Yún in folder /usr/bin.
- It prints information about the status of your wifi connection.
-
- It uses Serial to print, so you need to connect your Yún to your
- computer using a USB cable and select the appropriate port from
- the Port menu
-
- created  18 June 2013
- By Federico Fissore
- 
- This example code is in the public domain.
- */
-
-#include <Process.h>
-
-void setup() {
-  Serial.begin(9600);  // initialize serial communication
-  while(!Serial);      // do nothing until the serial monitor is opened
- 
-  Serial.println("Starting bridge...\n");
-  pinMode(13,OUTPUT);  
-  digitalWrite(13, LOW);  
-  Bridge.begin();  // make contact with the linux processor
-  digitalWrite(13, HIGH);  // Led on pin 13 turns on when the bridge is ready
-
-  delay(2000);  // wait 2 seconds
-}
-
-void loop() {
-  Process wifiCheck;  // initialize a new process
-
-  wifiCheck.runShellCommand("/usr/bin/pretty-wifi-info.lua");  // command you want to run
-
-  // while there's any characters coming back from the 
-  // process, print them to the serial monitor:
-  while (wifiCheck.available() > 0) {
-    char c = wifiCheck.read();
-    Serial.print(c);
-  }
-  
-  Serial.println();
-  
-  delay(5000);
-}
-
diff --git a/libraries/Bridge/examples/XivelyClient/XivelyClient.ino b/libraries/Bridge/examples/XivelyClient/XivelyClient.ino
deleted file mode 100644
index 69f979c..0000000
--- a/libraries/Bridge/examples/XivelyClient/XivelyClient.ino
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-  Xively sensor client with Strings 
- 
- This sketch connects an analog sensor to Xively,
- using an Arduino Yún. 
- 
- created 15 March 2010
- updated 27 May 2013
- by Tom Igoe
- 
- */
-
-// include all Libraries needed:
-#include <Process.h>
-#include "passwords.h"      // contains my passwords, see below
-
-/*
-  NOTE: passwords.h is not included with this repo because it contains my passwords.
- You need to create it for your own version of this application.  To do so, make
- a new tab in Arduino, call it passwords.h, and include the following variables and constants:
- 
- #define APIKEY        "foo"                  // replace your pachube api key here
- #define FEEDID        0000                   // replace your feed ID
- #define USERAGENT     "my-project"           // user agent is the project name
- */
-
-
-// set up net client info:
-const unsigned long postingInterval = 60000;  //delay between updates to xively.com
-unsigned long lastRequest = 0;      // when you last made a request
-String dataString = "";
-
-void setup() {
-  // start serial port:
-  Bridge.begin();
-  Serial.begin(9600);
-
-  while(!Serial);    // wait for Network Serial to open
-  Serial.println("Xively client");
-
-  // Do a first update immediately
-  updateData();
-  sendData();
-  lastRequest = millis();
-}
-
-void loop() {
-  // get a timestamp so you can calculate reading and sending intervals:
-  long now = millis();
-
-  // if the sending interval has passed since your
-  // last connection, then connect again and send data:
-  if (now - lastRequest >= postingInterval) {
-    updateData();
-    sendData();
-    lastRequest = now;
-  }
-}
-
-void updateData() {
-  // convert the readings to a String to send it:
-  dataString = "Temperature,";
-  dataString += random(10) + 20;
-  // add pressure:
-  dataString += "\nPressure,";
-  dataString += random(5) + 100;
-}
-
-// this method makes a HTTP connection to the server:
-void sendData() {
-  // form the string for the API header parameter:
-  String apiString = "X-ApiKey: ";
-  apiString += APIKEY;
-
-  // form the string for the URL parameter:
-  String url = "https://api.xively.com/v2/feeds/";
-  url += FEEDID;
-  url += ".csv";
-
-  // Send the HTTP PUT request
-
-  // Is better to declare the Process here, so when the
-  // sendData function finishes the resources are immediately
-  // released. Declaring it global works too, BTW.
-  Process xively;
-  Serial.print("\n\nSending data... ");
-  xively.begin("curl");
-  xively.addParameter("-k");
-  xively.addParameter("--request");
-  xively.addParameter("PUT");
-  xively.addParameter("--data");
-  xively.addParameter(dataString);
-  xively.addParameter("--header");
-  xively.addParameter(apiString); 
-  xively.addParameter(url);
-  xively.run();
-  Serial.println("done!");
-
-  // If there's incoming data from the net connection,
-  // send it out the Serial:
-  while (xively.available()>0) {
-    char c = xively.read();
-    Serial.write(c);
-  }
-
-}
-
-
-
-
diff --git a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
deleted file mode 100644
index faffd93..0000000
--- a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-  Arduino Yun USB-to-Serial
- 
- Allows you to use the Yun's 32U4 processor as a
- serial terminal for the linino processor.
- 
- Upload this to an Arduino Yun via serial (not WiFi) 
- then open the serial monitor at 115200 to see the boot process
- of the linino processor. You can also use the serial monitor
- as a basic command line interface for the linino processor using 
- this sketch.
- 
- From the serial monitor the following commands can be issued:
- 
- '~' followed by '0' -> Set the UART speed to 57600 baud
- '~' followed by '1' -> Set the UART speed to 115200 baud
- '~' followed by '2' -> Set the UART speed to 250000 baud
- '~' followed by '3' -> Set the UART speed to 500000 baud
- '~' followeb by '~' -> Sends the bridge's shutdown command to
-                        obtain the console.
-                        
- The circuit:
- * Arduino Yun
- 
- created March 2013
- by Massimo Banzi
- modified by Cristian Maglie
- 
- This example code is in the public domain.
- */
-
-long lininoBaud = 250000;
-
-void setup() {
-  Serial.begin(115200);      // open serial connection via USB-Serial
-  Serial1.begin(lininoBaud); // open serial connection to Linino
-}
-
-boolean commandMode = false;
-
-void loop() {
-  // copy from virtual serial line to uart and vice versa
-  if (Serial.available()) {           // got anything from USB-Serial?
-    char c = (char)Serial.read();     // read from USB-serial
-    if (commandMode == false) {       // if we aren't in command mode...
-      if (c == '~') {                 //    Tilde '~' key pressed?
-        commandMode = true;           //       enter in command mode
-      } else {
-        Serial1.write(c);             //    otherwise write char to Linino
-      }
-    } else {                          // if we are in command mode...
-      if (c == '0') {                 //     '0' key pressed?
-        Serial1.begin(57600);         //        set speed to 57600
-        Serial.println("Speed set to 57600");
-      } else if (c == '1') {          //     '1' key pressed?
-        Serial1.begin(115200);        //        set speed to 115200
-        Serial.println("Speed set to 115200");
-      } else if (c == '2') {          //     '2' key pressed?
-        Serial1.begin(250000);        //        set speed to 250000
-        Serial.println("Speed set to 250000");
-      } else if (c == '3') {          //     '3' key pressed?
-        Serial1.begin(500000);        //        set speed to 500000
-        Serial.println("Speed set to 500000");
-      } else if (c == '~') {
-        Serial1.write((uint8_t *)"\xff\0\0\x05XXXXX\x0d\xaf", 11);
-        Serial.println("Sending bridge's shutdown command");
-      } else {                        //     any other key pressed?
-        Serial1.write('~');           //        write '~' to Linino
-        Serial1.write(c);             //        write char to Linino
-      }
-      commandMode = false;            //     in all cases exit from command mode
-    }
-  }
-  if (Serial1.available()) {          // got anything from Linino?         
-    char c = (char)Serial1.read();    // read from Linino  
-    Serial.write(c);                  // write to USB-serial
-  }
-}
\ No newline at end of file
diff --git a/libraries/Bridge/keywords.txt b/libraries/Bridge/keywords.txt
deleted file mode 100644
index 05453b8..0000000
--- a/libraries/Bridge/keywords.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-#######################################
-# Syntax Coloring Map For Bridge
-#######################################
-
-#######################################
-# Class (KEYWORD3)
-#######################################
-
-Bridge	KEYWORD3
-FileIO	KEYWORD3
-FileSystem	KEYWORD3
-Console	KEYWORD3
-Process	KEYWORD3
-Mailbox	KEYWORD3
-HttpClient	KEYWORD3
-
-#######################################
-# Methods and Functions (KEYWORD2)
-#######################################
-
-# methods names in commond
-begin	KEYWORD2
-end	KEYWORD2
-available	KEYWORD2
-read	KEYWORD2
-peek	KEYWORD2
-write	KEYWORD2
-flush	KEYWORD2
-bool	KEYWORD2
-
-# Bridge Class
-transfer	KEYWORD2
-put	KEYWORD2
-get	KEYWORD2
-
-# Console Class
-buffer	KEYWORD2
-noBuffer	KEYWORD2
-connected	KEYWORD2
-
-# FileIO Class
-File	KEYWORD2
-seek	KEYWORD2
-position	KEYWORD2
-size	KEYWORD2
-close	KEYWORD2
-name	KEYWORD2
-isDirectory	KEYWORD2
-openNextFile	KEYWORD2
-rewindDirectory	KEYWORD2
-
-# Process Class
-addParameter	KEYWORD2
-runAsynchronously	KEYWORD2
-run	KEYWORD2
-running	KEYWORD2
-exitValue	KEYWORD2
-runShellCommand	KEYWORD2
-runShellCommandAsynchronously	KEYWORD2
-
-# Mailbox Class
-readMessage	KEYWORD2
-writeMessage	KEYWORD2
-writeJSON	KEYWORD2
-message Available	KEYWORD2
-
-# HttpClient Class
-getAsynchronously	KEYWORD2
-ready	KEYWORD2
-getResult	KEYWORD2
-
-# YunServer Class
-accept	KEYWORD2
-stop	KEYWORD2
-connect	KEYWORD2
-connected	KEYWORD2
-
-
-#######################################
-# Constants (LITERAL1)
-#######################################
-
-FILE_READ	LITERAL1
-FILE_WRITE	LITERAL1
-FILE_APPEND	LITERAL1