restored original non-interrupt-driven DiskLoader

Interrupt-driven version was a dead-end - too many bugs with that approach.

12 files changed, 883 insertions, 1050 deletions

diff --git a/bootloaders/diskloader/DiskLoader-Leonardo.hex b/bootloaders/diskloader/DiskLoader-Leonardo.hex
index 434b8bf..4528a8b 100644
--- a/bootloaders/diskloader/DiskLoader-Leonardo.hex
+++ b/bootloaders/diskloader/DiskLoader-Leonardo.hex
@@ -1,179 +1,113 @@
-:10700000BDC00000E0C00000DEC00000DCC0000029

-:10701000DAC00000D8C00000D6C00000D4C0000014

-:10702000D2C00000D0C00000C4C3000036C40000BD

-:10703000CAC00000C8C00000C6C00000C4C0000034

-:10704000C2C00000C0C00000BEC00000BCC0000044

-:10705000BAC00000B8C00000B6C00000B4C0000054

-:10706000B2C00000B0C00000AEC00000ACC0000064

-:10707000AAC00000A8C00000A6C00000A4C0000074

-:10708000A2C00000A0C000009EC000009CC0000084

-:107090009AC0000098C0000096C0000094C0000094

-:1070A00092C0000090C000008EC0000011241FBEDE

-:1070B000CFEFDAE0DEBFCDBF2AC1080B000202022B

-:1070C0000100090400000102020000052400100173

-:1070D0000524010101042402060524060001070518

-:1070E000810310004009040100020A0000000705A6

-:1070F00002024000000705830240000041014214E3

-:107100004505560455026403740300001E9587026A

-:10711000011003000403090422034100720064000B

-:10712000750069006E006F0020004C0065006F0064

-:107130006E006100720064006F001803410072006D

-:107140006400750069006E006F0020004C004C0068

-:107150004300120100020000004041233200000100

-:10716000010200011201000202000040412332002E

-:1071700000010102000100C180813D3C11241FBEBD

-:10718000CFEFDAE0DEBFCDBF11E0A0E0B1E0E6EF87

-:10719000FAE702C005900D92A830B107D9F711E0C7

-:1071A000A8E0B1E001C01D92A739B107E1F711E7EE

-:1071B000CCE7D1E703C02297FE0197D4CA37D107A5

-:1071C000D1F7A5D096C41CCFFC0180818E5F80834F

-:1071D00080E86AEB70E742E450E09DC2FC018181E7

-:1071E0009081913A49F48132C1F480E060E071E02D

-:1071F00047E050E090D20FC0913279F4803231F400

-:1072000080E091E067E070E0C2D205C0823229F4EC

-:1072100082818093070181E0089580E008952091A4

-:107220008C0130918D012F5F3F4F30938D01209362

-:107230008C01C901892F99278695982F803418F0E1

-:107240008FE7891B982F990F921710F4479808958C

-:10725000479A0895E0E0F0E0859194918F5F9F4F09

-:1072600081F04798289A769AF89401E005BF00E0EB

-:1072700005BF81E08093E0001092E200EE27FF2737

-:1072800009940895FF920F931F93CF93DF93982F44

-:107290008B01FF2480E76030780738F4FF24F394F3

-:1072A00083E0FB0180935700E895C42FD0E0892F3D

-:1072B00068E071E0AE0121D1FF2019F107B600FCB2

-:1072C000FDCFD595C7954C2FF801A8E0B1E020E09F

-:1072D00031E009C08D919D910C0130935700E895E4

-:1072E000112432962F5F2417A8F385E0F8018093CC

-:1072F0005700E89507B600FCFDCF81E18093570069

-:10730000E895DF91CF911F910F91FF90089588E14B

-:107310000FB6F89480936000109260000FBE3F9A01

-:10732000209A6E9A90E8909361001092610081E833

-:1073300085BF95BF01E005BF02E005BF769A289A98

-:10734000479886E991E083D2789484E1809388011C

-:1073500080E180938901CC24DD2470E9A72E71E0BF

-:10736000B72E02C0CC24DD2482E0BED0882309F4ED

-:1073700093C082E017D1E82E8CEF90E7FC012491B6

-:107380003196029644912E1511F02223B9F71092EE

-:107390008B0110928A0150E082E068E071E0ADD08C

-:1073A000F1E4EF1679F4609108016058633028F039

-:1073B000683111F064E001C063E0C62FD0E0C15F26

-:1073C000DE4810C026E5E21681F480910801803382

-:1073D00019F0FF24F39428C080910A01C82FD0E04F

-:1073E000C45FDE48FF24F39427C085E7E81629F43C

-:1073F00063E0F62ECCE0D1E71FC0E5E5EE1639F4E8

-:10740000C0900801D0900901CC0CDD1C0CC0F4E642

-:10741000EF1631F482E0B6014091090133DF03C079

-:1074200024E7E21621F0FF24C3E1D1E705C0F09084

-:107430000901E601CF0CD11C08E813E1015010400E

-:107440000930110509F43BC082E04ED0882309F0D1

-:1074500036C0F4CF809709F085CF83E068E871E00B

-:1074600041E050E0C7D0FF2029F04F2D50E083E8E5

-:10747000BE01C0D083E469E871E041E050E0BAD0D9

-:1074800081E5E81609F070CF88EE93E0F5013197B9

-:10749000F1F70197D9F711C0C2DEC5010197F1F7E5

-:1074A00080918A0190918B01019790938B01809339

-:1074B0008A010196019709F057CFCCDE55CF82E0C3

-:1074C00071D0EFEF8F3F9E0709F0C4CFC6CFFC010C

-:1074D00004C08091F100819361506623D1F7289810

-:1074E00084E680938F0108959FB7F8948770809306

-:1074F000E9008091F2009FBF0895FB019FB7F894C7

-:1075000087708093E90034E62BE610C08091E80094

-:1075100085FFFCCF289830938F018091F1008193F3

-:107520008091E80085FD02C02093E8004150504062

-:107530008FEF4F3F580751F79FBF0895282F809135

-:1075400090018823C1F057FF1AC015C02898909366

-:107550008F018091F1008193E217F307B9F741158C

-:10756000510539F08091F200882319F48BE680935D

-:10757000E800AFBF02C04FEF5FEFCA010895AFB799

-:10758000F89427702093E9008091F200282F30E0D2

-:10759000241735070CF4A901FB019B01240F311DB1

-:1075A00094E6DACFDF93CF930F92CDB7DEB7BE016B

-:1075B0006F5F7F4F41E050E0C1DF019719F08FEF1F

-:1075C0009FEF02C0898190E00F90CF91DF910895E5

-:1075D0002FB7F89487708093E9008091E80085FDCB

-:1075E00002C090E004C08091F20090E4981B2FBF8D

-:1075F000892F08955F926F927F928F929F92AF92A0

-:10760000BF92CF92DF92EF92FF920F931F93CF938F

-:10761000DF93F82E6A0180919001882319F44FEFCF

-:107620005FEF68C08B01EA0157E0E52EEF208F2D58

-:1076300090E040E2842E912C882299223AE3532E46

-:1076400020E4A22EB12CA822B92280EA682E8FE075

-:10765000782E43C08F2DBCDF282F882321F4C3014F

-:107660000197F1F73AC090E0C817D9070CF42C2F16

-:10767000C21BD1094FB7F894E092E900811491043C

-:1076800021F406C01092F10021502223D9F719C02D

-:10769000F7FC03C0F801922F10C0C801322F06C0BA

-:1076A000FC010196E491E093F10031503323C1F7DE

-:1076B00006C081918093F10091509923D1F7020F78

-:1076C000111D8091E80085FF05C0209729F4A114C1

-:1076D000B10411F05092E8004FBF209709F0BACFE3

-:1076E000F6FE03C08AE38093E800769884E68093F0

-:1076F0008E01A601CA01DF91CF911F910F91FF90DA

-:10770000EF90DF90CF90BF90AF909F908F907F9041

-:107710006F905F9008950F931F93182FFB01A09116

-:107720009301B0919401BA010EEF2AC017FF02C075

-:10773000949101C0908120919101309192012A177A

-:107740003B07ACF48091E8008570E1F38091E8009C

-:1077500082FF03C04FEF5FEF16C09093F100C901A5

-:1077600001968F739070892B11F40093E8002F5FBE

-:107770003F4F3093920120939101615070403196B8

-:107780006115710599F6CA011F910F910895CF9364

-:10779000DF939C01EB018091E80082FFFCCFC901DF

-:1077A0006C2F95DE8BEF8093E800CE01DF91CF91B7

-:1077B00008951F920F920FB60F9211242F933F93AB

-:1077C0008F938091E1001092E100282F83FF0FC07A

-:1077D0001092E90081E08093EB001092EC0082E3CC

-:1077E0008093ED001092900188E08093F00022FFDA

-:1077F00026C083E08093E9008091F200882319F08D

-:107800008AE38093E80080918E01882351F0809173

-:107810008E01815080938E0180918E01882309F41E

-:10782000769A80918F01882351F080918F01815049

-:1078300080938F0180918F01882309F4289A8F917A

-:107840003F912F910F900FBE0F901F90189510929F

-:10785000900181E08093D70080EA8093D80082E194

-:1078600089BD09B400FEFDCF80E98093D8008CE08B

-:107870008093E2001092E00008950895DF93CF9383

-:107880000F92CDB7DEB71982CE0101969DDC8981BA

-:1078900090E00F90CF91DF9108951F920F920FB655

-:1078A0000F921124EF92FF921F932F933F934F93C8

-:1078B0005F936F937F938F939F93AF93BF93EF9358

-:1078C000FF93DF93CF93CDB7DEB76197DEBFCDBF18

-:1078D0001092E9008091E80083FFECC0CE01019690

-:1078E00068E0F5DD82EF8093E800998197FF05C09D

-:1078F0008091E80080FFFCCF03C08EEF8093E8000A

-:10790000292F30E0C90180769070892B09F0B3C02F

-:107910008A81882329F41092F1001092F100BFC0EF

-:10792000813009F4BCC0833009F4B9C0853049F412

-:107930008091E80080FFFCCF8B8180688093E3001A

-:10794000AEC0863009F06DC01C81EF80F884123023

-:10795000A9F51092E90010929201109291011092F3

-:107960009401109293018ADF99E0FE013996DF01BC

-:10797000292F1D922A95E9F799871A8791E09E870A

-:1079800090E8988B9AEF998B209191013091920118

-:10799000275F3F4F3C872B878D871092E90010921D

-:1079A000920110929101F0929401E092930180E093

-:1079B000BF0149E050E0AFDE61DF71C01092E90025

-:1079C0001092920110929101F0929401E092930131

-:1079D000113071F488E0E816F10411F41093950168

-:1079E00080919501882309F062C0E2E5F1E713C0B8

-:1079F000133009F058C08B81882319F4E4E1F1E7D2

-:107A00000AC0823019F4E8E1F1E705C0813009F0DD

-:107A10004AC0EAE3F1E7449150E080E8BF017BDE31

-:107A20003EC0873009F43FC0883021F481E0809364

-:107A3000F10035C0893099F523703070232B99F50A

-:107A4000E7E7F1E791E031E026E39093E900309336

-:107A5000EB0084918093EC002093ED009F5F3196C2

-:107A6000943099F78EE78093EA001092EA008B81B8

-:107A70008093900114C08F8198851092E900109234

-:107A800092011092910190939401809393018D81C2

-:107A9000882349F4CE010196A1DB882321F08EEFE3

-:107AA0008093E80007C081E28093EB0003C0E4E626

-:107AB000F1E7B1CF6196DEBFCDBFCF91DF91FF91EE

-:107AC000EF91BF91AF919F918F917F916F915F9156

-:107AD0004F913F912F911F91FF90EF900F900FBE0C

-:107AE0000F901F901895EE0FFF1F0590F491E02D59

-:067AF0000994F894FFCF99

-:087AF60000E1000000000000A7

-:040000030000700089

+:1078000011241FBECFEFDAE0DEBFCDBFF2C04101D1

+:1078100042144505560455026403740300001E9586

+:1078200087020110030000C18081C106C0FF0A0069

+:107830000CA10185037508150026FF00954009017C

+:107840008102954009029102C004030904380341F2

+:107850000072006400750069006E006F0020004C2B

+:107860000065006F006E006100720064006F002010

+:107870000062006F006F0074006C006F00610064B4

+:107880000065007200180341007200640075006911

+:10789000006E006F0020004C004C004300120100FD

+:1078A00002020000404123340000010102000112E5

+:1078B00001000200000040412334000001010200E9

+:1078C00001090264000301008032080B0002020279

+:1078D000010009040000010202000005240010015B

+:1078E0000524010101042402020524060001070504

+:1078F000810310004009040100020A00000007058E

+:107900000202400000070583024000000904020053

+:107910000103000000092101010001221E000705EA

+:1079200084034000400020918A0130918B012C5F3C

+:107930003F4F30938B0120938A01C901892F9927EA

+:107940008695982F803418F08FE7891B982F990F10

+:10795000921710F447980895479A08955D9A289AC7

+:1079600081E08093E0001092E200EE27FF27099467

+:1079700008950F931F93CF93DF93982FEB01042F5C

+:1079800010E088E76030780730F411E083E0FB0115

+:1079900080935700E895892F68E071E0402FF8D078

+:1079A000112311F107B600FCFDCF402F4695FE01D3

+:1079B000A8E0B1E020E031E009C08D919D910C017B

+:1079C00030935700E895112432962F5F2417A8F3BF

+:1079D00085E0FE0180935700E89507B600FCFDCFD7

+:1079E00081E180935700E895DF91CF911F910F912E

+:1079F000089588E10FB6F8948093600010926000BB

+:107A00000FBE5D9A289A47983F9A209A559A90E817

+:107A1000909361001092610081E885BF95BF9FD06F

+:107A200084E18093880180E180938901E0E0F0E0C7

+:107A3000859194918F5F9F4F19F081E080938F0122

+:107A4000EE24FF24BB24B39454EFC52E51E0D52E71

+:107A50000ED2082F8EE098E7FC0124913196029611

+:107A60004491201711F02223B9F71092910110923E

+:107A7000900182E068E071E08BD0013479F460918C

+:107A800008016058633028F0683111F064E001C0EB

+:107A900063E0C62FD0E0CF5DD7480EC0063571F445

+:107AA00080910801803311F011E022C080910A0119

+:107AB000C82FD0E0C25ED74811E022C0053721F4BC

+:107AC00013E0CEE1D8E71CC0053539F4E090080199

+:107AD000F0900901EE0CFF1C0AC0043631F482E07C

+:107AE000B7014091090145DF02C0043721F010E0E1

+:107AF000C5E2D8E705C010910901E701E10EF11CCC

+:107B0000B6D18097B1F483E068E871E041E050E0DD

+:107B100059D0112329F0412F50E083E8BE0152D003

+:107B200083E469E871E041E050E04CD0013509F0B0

+:107B30008FCFD0929101C0929001B0928F01EE242C

+:107B4000FF2486CFFC01289884E680938D0104C031

+:107B50008091F100819361506623D1F708951092CE

+:107B600091011092900110928E0110928F0181E08C

+:107B70008093D70080EA8093D80082E189BD09B460

+:107B800000FEFDCF80E98093D8001092E0000895B8

+:107B9000FB018093E90024E69BE611C08091E80098

+:107BA00085FFFCCF289820938D018091F10081936F

+:107BB0008091E80085FD02C09093E8004150442385

+:107BC00069F70895982FFB01282F20728770809302

+:107BD000E90064E63AE317C08091E80085FFFCCF36

+:107BE00097FF02C0849101C080813196211180E00D

+:107BF0005D9860938C018093F1008091E80085FD91

+:107C000002C03093E800415050408FEF4F3F58077B

+:107C100019F796FF03C08AE38093E80008958091E6

+:107C20009301813299F45D9884E680938C0120E081

+:107C300030E003C080818093F100F901E050FF4FF4

+:107C40002F5F3F4F28303105A9F714C0803261F40F

+:107C50008091E80082FFFCCF80E091E067E072DF76

+:107C60008BEF8093E80006C0823221F4809194016A

+:107C70008093070181E0089520919501223261F1FE

+:107C8000213081F48091980190919901089711F425

+:107C900020939A0180919A01882309F04AC0EFEA63

+:107CA000F8E749C0223021F484E6E1ECF8E717C098

+:107CB000233009F03CC080919401882319F4E9E451

+:107CC000F8E739C0823019F4EDE4F8E734C08130C8

+:107CD00071F5E5E8F8E72FC081E0EBE2F8E7909175

+:107CE0009801382F981708F4392F90918C0120E0D3

+:107CF0004EEF8091E8008570E1F38091E80082FD0D

+:107D000012C02F5F84915D988093F100822F8F7352

+:107D100011F44093E800319694E6231750F39093C2

+:107D20008C0181E0089590938C0180E0089580E0BB

+:107D30000895EDE9F8E78491D2CF1092E90080919F

+:107D4000E80083FF61C082E991E068E0FBDE82EF3A

+:107D50008093E8008091920187FF05C08091E80040

+:107D600080FFFCCF03C08EEF8093E80080919301E9

+:107D7000853051F48091E80080FFFCCF8091940120

+:107D800080688093E30039C08930E1F480919401E8

+:107D900080938E01E7E2F8E791E031E026E39093EB

+:107DA000E9003093EB0084918093EC002093ED0088

+:107DB0009F5F3196953099F78EE78093EA00109295

+:107DC000EA001BC0883049F490918E015D9884E6EA

+:107DD00080938C019093F10010C0882339F45D9852

+:107DE00084E680938C011092F10007C0863011F474

+:107DF00043DF01C014DF882321F08EEF8093E80079

+:107E0000089581E28093EB0008958091E100109243

+:107E1000E100282F83FF0CC01092E90081E08093DD

+:107E2000EB001092EC0082E38093ED0010928E0143

+:107E300022FF1CC080918C01882331F081508093F7

+:107E40008C01882309F45D9A80918D01882331F09B

+:107E5000815080938D01882309F4289A80918F01A5

+:107E6000882321F4109291011092900108951F939C

+:107E7000CF93DF9312E0C0E9D1E05FDFC6DF10935C

+:107E8000E9008091E80085FF13C0289884E680937C

+:107E90008D019091F1008091E80085FD03C08BE693

+:107EA0008093E800892F90E0DF91CF911F91089592

+:107EB000809190019091910101979093910180930D

+:107EC00090018091900190919101892B09F446DDF8

+:0A7ED000CE010197F1F727DDD0CFB6

+:087EDA0000E1000000000000BF

+:040000030000780081

 :00000001FF

diff --git a/bootloaders/diskloader/DiskLoader-Micro.hex b/bootloaders/diskloader/DiskLoader-Micro.hex
new file mode 100644
index 0000000..fbbcc52
--- /dev/null
+++ b/bootloaders/diskloader/DiskLoader-Micro.hex
@@ -0,0 +1,113 @@
+:1078000011241FBECFEFDAE0DEBFCDBFF2C04101D1

+:1078100042144505560455026403740300001E9586

+:1078200087020110030000C18081C106C0FF0A0069

+:107830000CA10185037508150026FF00954009017C

+:107840008102954009029102C004030904380341F2

+:107850000072006400750069006E006F0020004D2A

+:10786000006900630072006F00200062006F006F0B

+:107870000074006C006F00610064006500720020FD

+:1078800000200020001803410072006400750069A8

+:10789000006E006F0020004C004C004300120100FD

+:1078A00002020000404123350000010102000112E4

+:1078B00001000200000040412335000001010200E8

+:1078C00001090264000301008032080B0002020279

+:1078D000010009040000010202000005240010015B

+:1078E0000524010101042402020524060001070504

+:1078F000810310004009040100020A00000007058E

+:107900000202400000070583024000000904020053

+:107910000103000000092101010001221E000705EA

+:1079200084034000400020918A0130918B012C5F3C

+:107930003F4F30938B0120938A01C901892F9927EA

+:107940008695982F803418F08FE7891B982F990F10

+:10795000921710F447980895479A08955D9A289AC7

+:1079600081E08093E0001092E200EE27FF27099467

+:1079700008950F931F93CF93DF93982FEB01042F5C

+:1079800010E088E76030780730F411E083E0FB0115

+:1079900080935700E895892F68E071E0402FF8D078

+:1079A000112311F107B600FCFDCF402F4695FE01D3

+:1079B000A8E0B1E020E031E009C08D919D910C017B

+:1079C00030935700E895112432962F5F2417A8F3BF

+:1079D00085E0FE0180935700E89507B600FCFDCFD7

+:1079E00081E180935700E895DF91CF911F910F912E

+:1079F000089588E10FB6F8948093600010926000BB

+:107A00000FBE5D9A289A47983F9A209A559A90E817

+:107A1000909361001092610081E885BF95BF9FD06F

+:107A200084E18093880180E180938901E0E0F0E0C7

+:107A3000859194918F5F9F4F19F081E080938F0122

+:107A4000EE24FF24BB24B39454EFC52E51E0D52E71

+:107A50000ED2082F8EE098E7FC0124913196029611

+:107A60004491201711F02223B9F71092910110923E

+:107A7000900182E068E071E08BD0013479F460918C

+:107A800008016058633028F0683111F064E001C0EB

+:107A900063E0C62FD0E0CF5DD7480EC0063571F445

+:107AA00080910801803311F011E022C080910A0119

+:107AB000C82FD0E0C25ED74811E022C0053721F4BC

+:107AC00013E0CEE1D8E71CC0053539F4E090080199

+:107AD000F0900901EE0CFF1C0AC0043631F482E07C

+:107AE000B7014091090145DF02C0043721F010E0E1

+:107AF000C5E2D8E705C010910901E701E10EF11CCC

+:107B0000B6D18097B1F483E068E871E041E050E0DD

+:107B100059D0112329F0412F50E083E8BE0152D003

+:107B200083E469E871E041E050E04CD0013509F0B0

+:107B30008FCFD0929101C0929001B0928F01EE242C

+:107B4000FF2486CFFC01289884E680938D0104C031

+:107B50008091F100819361506623D1F708951092CE

+:107B600091011092900110928E0110928F0181E08C

+:107B70008093D70080EA8093D80082E189BD09B460

+:107B800000FEFDCF80E98093D8001092E0000895B8

+:107B9000FB018093E90024E69BE611C08091E80098

+:107BA00085FFFCCF289820938D018091F10081936F

+:107BB0008091E80085FD02C09093E8004150442385

+:107BC00069F70895982FFB01282F20728770809302

+:107BD000E90064E63AE317C08091E80085FFFCCF36

+:107BE00097FF02C0849101C080813196211180E00D

+:107BF0005D9860938C018093F1008091E80085FD91

+:107C000002C03093E800415050408FEF4F3F58077B

+:107C100019F796FF03C08AE38093E80008958091E6

+:107C20009301813299F45D9884E680938C0120E081

+:107C300030E003C080818093F100F901E050FF4FF4

+:107C40002F5F3F4F28303105A9F714C0803261F40F

+:107C50008091E80082FFFCCF80E091E067E072DF76

+:107C60008BEF8093E80006C0823221F4809194016A

+:107C70008093070181E0089520919501223261F1FE

+:107C8000213081F48091980190919901089711F425

+:107C900020939A0180919A01882309F04AC0EFEA63

+:107CA000F8E749C0223021F484E6E1ECF8E717C098

+:107CB000233009F03CC080919401882319F4E9E451

+:107CC000F8E739C0823019F4EDE4F8E734C08130C8

+:107CD00071F5E5E8F8E72FC081E0EBE2F8E7909175

+:107CE0009801382F981708F4392F90918C0120E0D3

+:107CF0004EEF8091E8008570E1F38091E80082FD0D

+:107D000012C02F5F84915D988093F100822F8F7352

+:107D100011F44093E800319694E6231750F39093C2

+:107D20008C0181E0089590938C0180E0089580E0BB

+:107D30000895EDE9F8E78491D2CF1092E90080919F

+:107D4000E80083FF61C082E991E068E0FBDE82EF3A

+:107D50008093E8008091920187FF05C08091E80040

+:107D600080FFFCCF03C08EEF8093E80080919301E9

+:107D7000853051F48091E80080FFFCCF8091940120

+:107D800080688093E30039C08930E1F480919401E8

+:107D900080938E01E7E2F8E791E031E026E39093EB

+:107DA000E9003093EB0084918093EC002093ED0088

+:107DB0009F5F3196953099F78EE78093EA00109295

+:107DC000EA001BC0883049F490918E015D9884E6EA

+:107DD00080938C019093F10010C0882339F45D9852

+:107DE00084E680938C011092F10007C0863011F474

+:107DF00043DF01C014DF882321F08EEF8093E80079

+:107E0000089581E28093EB0008958091E100109243

+:107E1000E100282F83FF0CC01092E90081E08093DD

+:107E2000EB001092EC0082E38093ED0010928E0143

+:107E300022FF1CC080918C01882331F081508093F7

+:107E40008C01882309F45D9A80918D01882331F09B

+:107E5000815080938D01882309F4289A80918F01A5

+:107E6000882321F4109291011092900108951F939C

+:107E7000CF93DF9312E0C0E9D1E05FDFC6DF10935C

+:107E8000E9008091E80085FF13C0289884E680937C

+:107E90008D019091F1008091E80085FD03C08BE693

+:107EA0008093E800892F90E0DF91CF911F91089592

+:107EB000809190019091910101979093910180930D

+:107EC00090018091900190919101892B09F446DDF8

+:0A7ED000CE010197F1F727DDD0CFB6

+:087EDA0000E1000000000000BF

+:040000030000780081

+:00000001FF

diff --git a/bootloaders/diskloader/Makefile b/bootloaders/diskloader/Makefile
index 8eec350..6ac3db3 100644
--- a/bootloaders/diskloader/Makefile
+++ b/bootloaders/diskloader/Makefile
@@ -1,103 +1,105 @@
-###############################################################################

-# Makefile for DiskLoader

-###############################################################################

-

-## General Flags

-PROJECT = DiskLoader

-TARGET = DiskLoader.elf

-CC = avr-gcc

-

-# BOARD2

-MCU = atmega32u4

-AVR_FREQ   = 16000000L

-

+###############################################################################
+# Makefile for DiskLoader
+###############################################################################
+
+## General Flags
+PROJECT = DiskLoader
+TARGET = DiskLoader.elf
+CC = avr-gcc
+
+# BOARD2
+MCU = atmega32u4
+AVR_FREQ   = 16000000L
+
 # Specify the Arduino model using the assigned PID.  This is used by Descriptors.c

 #   to set PID and product descriptor string

 # Arduino Leonardo PID

-ARDUINO_MODEL_PID = 0x0032

+ARDUINO_MODEL_PID = 0x0034

 # Arduino Micro PID

-#ARDUINO_MODEL_PID = 0x0033

-

-# Change if your programmer is different

-AVRDUDE_PROGRAMMER = avrispmkII

-AVRDUDE_PORT = usb	   

-

-# program name should not be changed...

-PROGRAM    = DiskLoader

-

-AVRDUDE = avrdude

-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU)

-

-## Options common to compile, link and assembly rules

-COMMON = -mmcu=$(MCU)

-

-override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types

-

-## Assembly specific flags

-ASMFLAGS = $(COMMON)

-ASMFLAGS += $(CFLAGS)

-ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2

-

-## Linker flags

-LDFLAGS = $(COMMON)

-LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--section-start=.text=0x7000,--relax

-

-## Intel Hex file production flags

-HEX_EEPROM_FLAGS = -j .eeprom

-HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load"

-HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings

-

-## Objects explicitly added by the user

-LINKONLYOBJECTS = 

-

-MODULES   := .

-SRC_DIR   := $(addprefix src/,$(MODULES))

-BUILD_DIR := $(addprefix build/,$(MODULES))

-

-SRC       := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp))

-OBJ       := $(patsubst src/%.cpp,build/%.o,$(SRC))

-DEP		  := $(OBJ:%.o=%.d)

-INCLUDES  := $(addprefix -I,$(SRC_DIR))

-

-vpath %.cpp $(SRC_DIR)

-

-.PHONY: all checkdirs clean

-

-all: checkdirs $(TARGET) DiskLoader.hex DiskLoader.lss size

-

--include $(DEP)

-

-checkdirs: $(BUILD_DIR)

-

-$(BUILD_DIR):

-	@mkdir -p $@

-

-clean:

-	@rm -rf build/

-	@rm -f *.hex

-	@rm -f *.elf

-	@rm -f *.lss

-	@rm -f *.map

-

-define make-goal

-$1/%.o: %.cpp

-	$(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@

-endef

-

-$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir))))

-

-$(TARGET): $(OBJ)

-	$(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@

-

-%.hex: $(TARGET)

-	avr-objcopy -O ihex $(HEX_FLASH_FLAGS)  $< $@

-	

-%.lss: $(TARGET)

-	avr-objdump -h -S $< > $@

-

-size: $(TARGET)

-	@echo

-#	@avr-size -C --mcu=${MCU} ${TARGET}.elf

-

-program: $(TARGET).hex

-	$(AVRDUDE) $(AVRDUDE_FLAGS) -B 1 -u -U flash:w:$(TARGET).hex

+#ARDUINO_MODEL_PID = 0x0035
+
+# Change if your programmer is different
+AVRDUDE_PROGRAMMER = avrispmkII
+AVRDUDE_PORT = usb	   
+
+# program name should not be changed...
+PROGRAM    = DiskLoader
+
+AVRDUDE = avrdude
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU)
+
+## Options common to compile, link and assembly rules
+COMMON = -mmcu=$(MCU)
+
+override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types
+
+## Assembly specific flags
+ASMFLAGS = $(COMMON)
+ASMFLAGS += $(CFLAGS)
+ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2
+
+## Linker flags
+LDFLAGS = $(COMMON)
+LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--section-start=.text=0x7800,--relax
+LDFLAGS += -nodefaultlibs -nostartfiles
+
+
+## Intel Hex file production flags
+HEX_EEPROM_FLAGS = -j .eeprom
+HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load"
+HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings
+
+## Objects explicitly added by the user
+LINKONLYOBJECTS = 
+
+MODULES   := .
+SRC_DIR   := $(addprefix src/,$(MODULES))
+BUILD_DIR := $(addprefix build/,$(MODULES))
+
+SRC       := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp))
+OBJ       := $(patsubst src/%.cpp,build/%.o,$(SRC))
+DEP		  := $(OBJ:%.o=%.d)
+INCLUDES  := $(addprefix -I,$(SRC_DIR))
+
+vpath %.cpp $(SRC_DIR)
+
+.PHONY: all checkdirs clean
+
+all: checkdirs $(TARGET) DiskLoader.hex DiskLoader.lss size
+
+-include $(DEP)
+
+checkdirs: $(BUILD_DIR)
+
+$(BUILD_DIR):
+	@mkdir -p $@
+
+clean:
+	@rm -rf build/
+	@rm -f *.hex
+	@rm -f *.elf
+	@rm -f *.lss
+	@rm -f *.map
+
+define make-goal
+$1/%.o: %.cpp
+	$(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@
+endef
+
+$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir))))
+
+$(TARGET): $(OBJ)
+	$(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@
+
+%.hex: $(TARGET)
+	avr-objcopy -O ihex $(HEX_FLASH_FLAGS)  $< $@
+	
+%.lss: $(TARGET)
+	avr-objdump -h -S $< > $@
+
+size: $(TARGET)
+	@echo
+#	@avr-size -C --mcu=${MCU} ${TARGET}.elf
+
+program: $(TARGET).hex
+	$(AVRDUDE) $(AVRDUDE_FLAGS) -B 5 -u -U flash:w:$(TARGET).hex
\ No newline at end of file
diff --git a/bootloaders/diskloader/src/CDC.cpp b/bootloaders/diskloader/src/CDC.cpp
deleted file mode 100644
index 4496a9c..0000000
--- a/bootloaders/diskloader/src/CDC.cpp
+++ /dev/null
@@ -1,93 +0,0 @@
-
-
-/* Copyright (c) 2011, Peter Barrett  
-**  
-** Permission to use, copy, modify, and/or distribute this software for  
-** any purpose with or without fee is hereby granted, provided that the  
-** above copyright notice and this permission notice appear in all copies.  
-** 
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL  
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED  
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR  
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES  
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,  
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS  
-** SOFTWARE.  
-*/
-
-#include "Platform.h"
-#include "USBAPI.h"
-#include <avr/wdt.h>
-
-#if defined(USBCON)
-
-typedef struct
-{
-	u32	dwDTERate;
-	u8	bCharFormat;
-	u8 	bParityType;
-	u8 	bDataBits;
-	u8	lineState;
-} LineInfo;
-
-static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
-
-#define WEAK __attribute__ ((weak))
-
-extern const CDCDescriptor _cdcInterface PROGMEM;
-const CDCDescriptor _cdcInterface =
-{
-	D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
-
-	//	CDC communication interface
-	D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
-	D_CDCCS(CDC_HEADER,0x10,0x01),								// Header (1.10 bcd)
-	D_CDCCS(CDC_CALL_MANAGEMENT,1,1),							// Device handles call management (not)
-	D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6),				// SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
-	D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE),	// Communication interface is master, data interface is slave 0
-	D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
-
-	//	CDC data interface
-	D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
-	D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
-	D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
-};
-
-int WEAK CDC_GetInterface(u8* interfaceNum)
-{
-	interfaceNum[0] += 2;	// uses 2
-	return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface));
-}
-
-bool WEAK CDC_Setup(Setup& setup)
-{
-	u8 r = setup.bRequest;
-	u8 requestType = setup.bmRequestType;
-
-	if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
-	{
-		if (CDC_GET_LINE_CODING == r)
-		{
-			USB_SendControl(0,(void*)&_usbLineInfo,7);
-			return true;
-		}
-	}
-
-	if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
-	{
-		if (CDC_SET_LINE_CODING == r)
-		{
-			USB_RecvControl((void*)&_usbLineInfo,7);
-			return true;
-		}
-
-		if (CDC_SET_CONTROL_LINE_STATE == r)
-		{
-			_usbLineInfo.lineState = setup.wValueL;
-			return true;
-		}
-	}
-	return false;
-}
-#endif /* if defined(USBCON) */
diff --git a/bootloaders/diskloader/src/DiskLoader.cpp b/bootloaders/diskloader/src/DiskLoader.cpp
index 2792bc6..6580618 100644
--- a/bootloaders/diskloader/src/DiskLoader.cpp
+++ b/bootloaders/diskloader/src/DiskLoader.cpp
@@ -1,67 +1,64 @@
-/*
- *  DiskLoader.cpp
- */
+
 
 #include "Platform.h"
 
+//	This bootloader creates a composite Serial device
+//
+//	The serial interface supports a STK500v1 protocol that is very similar to optiboot
+//
+//	The bootloader will timeout and start the firmware after a few hundred milliseconds
+//	if a usb connection is not detected.
+//	
+//	The tweakier code is to keep the bootloader below 2k (no interrupt table, for example)
+
 extern "C"
 void entrypoint(void) __attribute__ ((naked)) __attribute__ ((section (".vectors")));
 void entrypoint(void)
 {
 	asm volatile (
-				  "eor	r1,		r1\n"	// Zero register
-				  "out	0x3F,	r1\n"	// SREG
-				  "ldi	r28,	0xFF\n" // Y-register
-				  "ldi	r29,	0x0A\n"	// Y-register
-				  "out	0x3E,	r29\n"	// SPH
-				  "out	0x3D,	r28\n"	// SPL
-				  "rjmp	main"			// Stack is all set up, start the main code
-				  ::);
+		"eor	r1,		r1\n"	// Zero register
+		"out	0x3F,	r1\n"	// SREG
+		"ldi	r28,	0xFF\n"
+		"ldi	r29,	0x0A\n"
+		"out	0x3E,	r29\n"	// SPH
+		"out	0x3D,	r28\n"	// SPL
+		"rjmp	main"			// Stack is all set up, start the main code
+		::);
 }
 
 u8 _flashbuf[128];
 u8 _inSync;
 u8 _ok;
-u16 do_reset = 0;
-volatile u16 _timeout = 0;
+extern volatile u8 _ejected;
+extern volatile u16 _timeout;
 
 void Program(u8 ep, u16 page, u8 count)
 {
-	u8 write = page < 28*1024;		// Don't write over bootloader please
+	u8 write = page < 30*1024;		// Don't write over firmware please
 	if (write)
 		boot_page_erase(page);
-	
-	USB_Recv_block(ep,_flashbuf,count);	// Read while page is erasing
-	
+
+	Recv(ep,_flashbuf,count);		// Read while page is erasing
+
 	if (!write)
 		return;
-	
+
 	boot_spm_busy_wait();			// Wait until the memory is erased.
-	
+
 	count >>= 1;
 	u16* p = (u16*)page;
 	u16* b = (u16*)_flashbuf;
 	for (u8 i = 0; i < count; i++)
 		boot_page_fill(p++, b[i]);
-	
+
     boot_page_write(page);
     boot_spm_busy_wait();
     boot_rww_enable ();
 }
 
-u16 _pulse;
-void LEDPulse() 
-{
-	_pulse += 1;
-	u8 p = _pulse >> 9;
-	if (p > 63)
-		p = 127-p;
-	p += p;
-	if (((u8)_pulse) > p)
-		L_LED_OFF();
-	else
-		L_LED_ON();
-}
+
+int USBGetChar();
+#define getch USBGetChar
 
 #define HW_VER	 0x02
 #define SW_MAJOR 0x01
@@ -107,147 +104,136 @@ const u8 _consts[] =
 	0x00,		// 
 };
 
-void start_sketch()
-{
-	if (pgm_read_word(0) == -1)		// no sketch has been uploaded yet - stay in bootloader
-		return;
-	
-	L_LED_OFF();
-	RX_LED_OFF();
-	TX_LED_OFF();
-	/* move interrupts to application section:
-	 * uses inline assembly because the procedure must be completed in four cycles.
-	 */
-	cli();	// disable interrupts first
-	asm volatile (
-				  "ldi r16,	  0x01\n"		// (1<<IVCE)	/* Enable change of interrupt vectors */
-				  "out 0x35,  r16\n"		// MCUCR
-				  "ldi r16,	  0x00\n"		// (1<<IVSEL)	/* Move interrupts to application flash section */
-				  "out 0x35,  r16\n"		// MCUCR				  
-				  );							
-	UDCON = 1;		// Detatch USB
-	UDIEN = 0;
-	asm volatile (	// Reset vector to run firmware
-				  "clr r30\n"
-				  "clr r31\n"
-				  "ijmp\n"
-				  ::);
-}
 
+void USBInit(void);
 int main(void) __attribute__ ((naked));
-int main() 
-{		
+
+//	STK500v1 main loop, very similar to optiboot in protocol and implementation
+int main()
+{
 	wdt_disable();
+	TXLED0;
+	RXLED0;
+	LED0;
 	BOARD_INIT();
-	/* move interrupts to boot section:
-	 * uses inline assembly because the procedure must be completed in four cycles.
-	 * seems to fail if called before disabling WDT and calling BOARD_INIT()
-	 */
-	asm volatile (
-				  "ldi r16,	  0x01\n"		// (1<<IVCE)	/* Enable change of interrupt vectors */
-				  "out 0x35,  r16\n"		// MCUCR
-				  "ldi r16,	  0x02\n"		// (1<<IVSEL)	/* Move interrupts to boot flash section */
-				  "out 0x35,  r16\n"		// MCUCR				  
-				  );	
-	TX_LED_OFF();
-	RX_LED_OFF();
-	L_LED_OFF();
-	USB.attach();	
-	sei();
-	
+	USBInit();
+
 	_inSync = STK_INSYNC;
 	_ok = STK_OK;
-	
-	for (;;) 
+
+	if (pgm_read_word(0) != -1)
+		_ejected = 1;
+
+	for(;;)
 	{
 		u8* packet = _flashbuf;
 		u16 address = 0;
 		for (;;)
-		{		
-			if (USB_Available(CDC_RX)) 
+		{
+			u8 cmd = getch();
+
+			//	Read packet contents
+			u8 len;
+			const u8* rs = _readSize;
+			for(;;)
 			{
-				u8 cmd = USB_Recv(CDC_RX);
-				
-				// Read packet contents
-				u8 len;
-				const u8* rs = _readSize;
-				for (;;) 
-				{
-					u8 c = pgm_read_byte(rs++);
-					len = pgm_read_byte(rs++);
-					if (c == cmd || c == 0)
-						break;
-				}
-				_timeout = 0;
-				// Read params
-				USB_Recv_block(CDC_RX, packet, len);
-				
-				// Send a response
-				u8 send = 0;
-				const u8* pgm = _consts+7;
-				if (STK_GET_PARAMETER == cmd)
-				{
-					u8 i = packet[0] - 0x80;
-					if (i > 2)
-						i = (i==0x18) ? 3 : 4;	
-					pgm = _consts + i + 3;
-					send = 1;
-				} 
-				else if (STK_UNIVERSAL == cmd) 
-				{
-					if (packet[0] == 0x30)
-						pgm = _consts + packet[2];	
-					send = 1;
-				}
-				else if (STK_READ_SIGN == cmd)
-				{ 
-					pgm = _consts;
-					send = 3;
-				}
-				else if (STK_LOAD_ADDRESS == cmd) 
-				{
-					address = *((u16*)packet);	// word address
-					address += address;
-				}
-				else if (STK_PROG_PAGE == cmd)
-				{
-					Program(CDC_RX, address, packet[1]);
-				}
-				else if (STK_READ_PAGE == cmd)
-				{
-					send = packet[1];
-					pgm = (const u8*)address;
-					address += send;
-				}
-				
-				u16 countdown = 5000;
-				while (countdown-- > 10 && !USB_Available(CDC_RX)) 
-					;
-				int x = USB_Recv(CDC_RX);
-				if (x != -1 && x != ' ')
+				u8 c = pgm_read_byte(rs++);
+				len = pgm_read_byte(rs++);
+				if (c == cmd || c == 0)
 					break;
-				
-				USB_Send(CDC_TX, &_inSync, 1);
-				
-				if (send) 
-					USB_Send(CDC_TX|TRANSFER_PGM, pgm, send);
-				
-				// Send ok
-				USB_Send(CDC_TX|TRANSFER_RELEASE, &_ok, 1);
-				
-				if ('Q' == cmd) 
-				{
-					_delay_ms(100);
-					start_sketch();
-				}
 			}
-			else 
+			_timeout = 0;
+			//	Read params
+			Recv(CDC_RX,packet,len);
+
+			//	Send a response
+			u8 send = 0;
+			const u8* pgm = _consts+7;			// 0
+			if (STK_GET_PARAMETER == cmd)
+			{
+				u8 i = packet[0] - 0x80;
+				if (i > 2)
+					i = (i == 0x18) ? 3 : 4;	// 0x80:HW_VER,0x81:SW_MAJOR,0x82:SW_MINOR,0x18:3 or 0
+				pgm = _consts + i + 3;
+				send = 1;
+			}
+
+			else if (STK_UNIVERSAL == cmd)
 			{
-				LEDPulse();
-				_delay_us(100);
-				if (_timeout-- == 1)
-					start_sketch();
+				if (packet[0] == 0x30)
+					pgm = _consts + packet[2];	// read signature
+				send = 1;
 			}
+			
+			//	Read signature bytes
+			else if (STK_READ_SIGN == cmd)
+			{
+				pgm = _consts;
+				send = 3;
+			}
+
+			else if (STK_LOAD_ADDRESS == cmd)
+			{
+				address = *((u16*)packet);		// word addresses
+				address += address;
+			}
+
+			else if (STK_PROG_PAGE == cmd)
+			{
+				Program(CDC_RX,address,packet[1]);
+			}
+
+			else if (STK_READ_PAGE == cmd)
+			{
+				send = packet[1];
+				pgm = (const u8*)address;
+				address += send; // not sure of this is required
+			}
+
+			// Check sync
+			if (getch() != ' ')
+				break;
+			Transfer(CDC_TX,&_inSync,1);
+
+			// Send result
+			if (send)
+				Transfer(CDC_TX|TRANSFER_PGM,pgm,send);	// All from pgm memory
+
+			//	Send ok
+			Transfer(CDC_TX|TRANSFER_RELEASE,&_ok,1);
+
+			if (cmd == 'Q')
+				break;
 		}
+		_timeout = 500;		// wait a moment before exiting the bootloader - may need to finish responding to 'Q' for example
+		_ejected = 1;
 	}
 }
+
+//	Nice breathing LED indicates we are in the firmware
+u16 _pulse;
+void LEDPulse()
+{
+	_pulse += 4;
+	u8 p = _pulse >> 9;
+	if (p > 63)
+		p = 127-p;
+	p += p;
+	if (((u8)_pulse) > p)
+		LED0;
+	else
+		LED1;
+}
+
+void Reboot()
+{
+	TXLED0;		// switch off the RX and TX LEDs before starting the user sketch
+	RXLED0;
+	UDCON = 1;		// Detatch USB
+	UDIEN = 0;
+	asm volatile (	// Reset vector to run firmware
+		"clr r30\n"
+		"clr r31\n"
+		"ijmp\n"
+	::);
+}
diff --git a/bootloaders/diskloader/src/Platform.h b/bootloaders/diskloader/src/Platform.h
index d1f884c..6acbf39 100644
--- a/bootloaders/diskloader/src/Platform.h
+++ b/bootloaders/diskloader/src/Platform.h
@@ -1,9 +1,3 @@
-/*
- *  Platform.h
- */
-
-#ifndef __PLATFORM_H__
-#define __PLATFORM_H__
 
 #include <inttypes.h>
 #include <avr/io.h>
@@ -17,50 +11,39 @@
 #include <stdlib.h>
 #include <string.h>
 
-#ifdef __cplusplus
-extern "C"{
-#endif
-
 typedef unsigned char u8;
 typedef unsigned short u16;
 typedef unsigned long u32;
 
-#define USB_PID_LEONARDO 0x0032
-#define USB_PID_MICRO 0x0033
-#define USB_VID 0x2341	// arduino LLC vid
-#define USB_PID ARDUINO_MODEL_PID	// passed in by Makefile - 0x0032 for Leonardo, 0x0033 for Micro
-
-#define min(a,b) ((a)<(b)?(a):(b))
 
 #define CPU_PRESCALE(n)	(CLKPR = 0x80, CLKPR = (n))
-#define DISABLE_JTAG()  MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD)
+#define DISABLE_JTAG()  MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD);
 
-#define BOARD_INIT()	DDRC |= (1<<7); DDRB |= (1<<0); DDRE |= (1<<6); CPU_PRESCALE(0); DISABLE_JTAG();	// for XXX-series boards
-//#define BOARD_INIT()	DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG();	// for non-XXX boards
+#define USB_PID_LEONARDO 0x0034
+#define USB_PID_MICRO 0x0035
+#define USB_VID 0x2341	// arduino LLC vid
+#define USB_PID ARDUINO_MODEL_PID	// passed in by Makefile - 0x0034 for Leonardo, 0x0035 for MIcro
+
+#define OEM_NAME		'l','e','o','n','a','r','d','o'					// 8 chars
+#define BOARD_INIT()	DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG();
+#define LED0			PORTC &= ~(1<<7)
+#define LED1			PORTC |= (1<<7)
+#define TXLED0			PORTD |= (1<<5)
+#define TXLED1			PORTD &= ~(1<<5)
+#define RXLED0			PORTB |= (1<<0)
+#define RXLED1			PORTB &= ~(1<<0)
 
-// for XXX-series boards
-#define TX_LED_OFF()		PORTE |= (1<<6)
-#define TX_LED_ON()			PORTE &= ~(1<<6)
-#define RX_LED_OFF()		PORTB |= (1<<0)
-#define RX_LED_ON()			PORTB &= ~(1<<0)
-#define L_LED_OFF()			PORTC &= ~(1<<7)
-#define L_LED_ON()			PORTC |= (1<<7)
-#define L_LED_TOGGLE()		PORTC ^= (1<<7)
+#define TRANSFER_PGM		0x80
+#define TRANSFER_RELEASE	0x40
+#define TRANSFER_ZERO		0x20
 
-// these for non-XXX boards
-//#define LED0			PORTC &= ~(1<<7)
-//#define LED1			PORTC |= (1<<7)
-//#define TXLED0			PORTD |= (1<<5)
-//#define TXLED1			PORTD &= ~(1<<5)
-//#define RXLED0			PORTB |= (1<<0)
-//#define RXLED1			PORTB &= ~(1<<0)
+void Transfer(u8 ep, const u8* data, int len);
+void Recv(u8 ep, u8* dst, u8 len);
+void Program(u8 ep, u16 page, u8 count);
 
-#ifdef __cplusplus
-}	/* extern "C"{ */
-#endif 
+#define CDC_ENABLED
 
+#include "USBCore.h"
 #include "USBDesc.h"
-#include "USBCore.h"	
-#include "USBAPI.h"
 
-#endif /* __PLATFORM_H__ */
+
diff --git a/bootloaders/diskloader/src/USBAPI.h b/bootloaders/diskloader/src/USBAPI.h
deleted file mode 100644
index f8d71c8..0000000
--- a/bootloaders/diskloader/src/USBAPI.h
+++ /dev/null
@@ -1,64 +0,0 @@
-
-
-#ifndef __USBAPI__
-#define __USBAPI__
-
-#if defined(USBCON)
-
-//================================================================================
-//================================================================================
-//	USB
-
-class USB_
-{
-public:
-	USB_();
-	bool configured();
-
-	void attach();
-	void detach();	// Serial port goes down too...
-	void poll();
-};
-extern USB_ USB;
-
-//================================================================================
-//================================================================================
-//	Low level API
-
-typedef struct
-{
-	uint8_t bmRequestType;
-	uint8_t bRequest;
-	uint8_t wValueL;
-	uint8_t wValueH;
-	uint16_t wIndex;
-	uint16_t wLength;
-} Setup;
-
-//================================================================================
-//================================================================================
-//	CDC 'Driver'
-
-int		CDC_GetInterface(uint8_t* interfaceNum);
-int		CDC_GetDescriptor(int i);
-bool	CDC_Setup(Setup& setup);
-
-//================================================================================
-//================================================================================
-
-#define TRANSFER_PGM		0x80
-#define TRANSFER_RELEASE	0x40
-#define TRANSFER_ZERO		0x20
-
-int USB_SendControl(uint8_t flags, const void* d, int len);
-int USB_RecvControl(void* d, int len);
-
-uint8_t	USB_Available(uint8_t ep);
-int USB_Send(uint8_t ep, const void* data, int len);	// blocking
-int USB_Recv(uint8_t ep, void* data, int len);		// non-blocking
-void USB_Recv_block(u8 ep, u8* dst, int len);		// blocking
-int USB_Recv(uint8_t ep);							// non-blocking
-void USB_Flush(uint8_t ep);
-
-#endif
-#endif /* if defined(USBCON) */
diff --git a/bootloaders/diskloader/src/USBCore.cpp b/bootloaders/diskloader/src/USBCore.cpp
index 6518ae9..ca74721 100644
--- a/bootloaders/diskloader/src/USBCore.cpp
+++ b/bootloaders/diskloader/src/USBCore.cpp
@@ -1,4 +1,5 @@
 
+
 /* Copyright (c) 2010, Peter Barrett  
 **  
 ** Permission to use, copy, modify, and/or distribute this software for  
@@ -16,10 +17,9 @@
 */
 
 #include "Platform.h"
-#include "USBAPI.h"
-#include "USBDesc.h"
 
-#if defined(USBCON)
+#define CDC_TX CDC_ENDPOINT_IN
+#define CDC_RX CDC_ENDPOINT_OUT
 
 #define EP_TYPE_CONTROL				0x00
 #define EP_TYPE_BULK_IN				0x81
@@ -31,50 +31,32 @@
 
 /** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */
 #define TX_RX_LED_PULSE_MS 100
-volatile u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */
-volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */
+u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */
+u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */
+
+void Reboot();
 
 //==================================================================
 //==================================================================
 
-extern const u16 STRING_LANGUAGE[] PROGMEM;
-extern const u16 STRING_IPRODUCT[] PROGMEM;
-extern const u16 STRING_IMANUFACTURER[] PROGMEM;
-extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM;
-extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM;
-
-const u16 STRING_LANGUAGE[2] = {
-	(3<<8) | (2+2),
-	0x0409	// English
-};
-
-const u16 STRING_IPRODUCT[17] = {
-	(3<<8) | (2+2*16),
-#if USB_PID == USB_PID_LEONARDO	
-	'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o'
-#elif USB_PID == USB_PID_MICRO
-	'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' '
-#endif
-};
-
-const u16 STRING_IMANUFACTURER[12] = {
-	(3<<8) | (2+2*11),
-	'A','r','d','u','i','n','o',' ','L','L','C'
-};
-
-#define DEVICE_CLASS 0x02
-
-//	DEVICE DESCRIPTOR
-const DeviceDescriptor USB_DeviceDescriptor =
-	D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
+typedef struct
+{
+	u32	dwDTERate;
+	u8	bCharFormat;
+	u8 	bParityType;
+	u8 	bDataBits;
+	u8	lineState;
+} LineInfo;
 
-const DeviceDescriptor USB_DeviceDescriptorA =
-	D_DEVICE(DEVICE_CLASS,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
+static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
 
 //==================================================================
 //==================================================================
 
-volatile u8 _usbConfiguration = 0;
+//	4 bytes of RAM
+volatile u8 _usbConfiguration;
+volatile u8 _ejected;
+volatile u16 _timeout;
 
 static inline void WaitIN(void)
 {
@@ -104,25 +86,34 @@ static inline void ClearOUT(void)
 	UEINTX = ~(1<<RXOUTI);
 }
 
+static
+void Send(volatile const u8* data, u8 count)
+{
+	TXLED1;					// light the TX LED
+	TxLEDPulse = TX_RX_LED_PULSE_MS;
+	while (count--)
+		UEDATX = *data++;
+}
+
 void Recv(volatile u8* data, u8 count)
 {
+	RXLED1;					// light the RX LED
+	RxLEDPulse = TX_RX_LED_PULSE_MS;
 	while (count--)
 		*data++ = UEDATX;
-	
-	RX_LED_ON();
-	RxLEDPulse = TX_RX_LED_PULSE_MS;	
 }
 
 static inline u8 Recv8()
 {
-	RX_LED_ON();
+	RXLED1;					// light the RX LED
 	RxLEDPulse = TX_RX_LED_PULSE_MS;
-
-	return UEDATX;	
+	return UEDATX;
 }
 
 static inline void Send8(u8 d)
 {
+	TXLED1;					// light the TX LED
+	TxLEDPulse = TX_RX_LED_PULSE_MS;
 	UEDATX = d;
 }
 
@@ -184,37 +175,48 @@ static inline u8 FrameNumber()
 //==================================================================
 //==================================================================
 
-u8 USBGetConfiguration(void)
+#define EP_SINGLE_64 0x32	// EP0
+#define EP_DOUBLE_64 0x36	// Other endpoints
+
+static void InitEP(u8 index, u8 type, u8 size)
 {
-	return _usbConfiguration;
+	UENUM = index;
+	UECONX = 1;
+	UECFG0X = type;
+	UECFG1X = size;
 }
 
-#define USB_RECV_TIMEOUT
-class LockEP
+//	API
+void USBInit(void)
 {
-	u8 _sreg;
-public:
-	LockEP(u8 ep) : _sreg(SREG)
-	{
-		cli();
-		SetEP(ep & 7);
-	}
-	~LockEP()
-	{
-		SREG = _sreg;
-	}
-};
+	_timeout = 0;
+	_usbConfiguration = 0;
+	_ejected = 0;
+	
+	UHWCON = 0x01;						// power internal reg (don't need this?)
+	USBCON = (1<<USBE)|(1<<FRZCLK);		// clock frozen, usb enabled
+	PLLCSR = 0x12;						// Need 16 MHz xtal
+	while (!(PLLCSR & (1<<PLOCK)))		// wait for lock pll
+		;
+	USBCON = ((1<<USBE)|(1<<OTGPADE));	// start USB clock
+	UDCON = 0;							// enable attach resistor
+}
 
-//	Number of bytes, assumes a rx endpoint
-u8 USB_Available(u8 ep)
+u8 USBGetConfiguration(void)
 {
-	LockEP lock(ep);
-	return FifoByteCount();
+	return _usbConfiguration;
+}
+
+u8 HasData(u8 ep)
+{
+	SetEP(ep);
+	return ReadWriteAllowed();	// count in fifo
 }
 
-void USB_Recv_block(u8 ep, u8* dst, int len)
+int USBGetChar();
+void Recv(u8 ep, u8* dst, u8 len)
 {
-	LockEP lock(ep);
+	SetEP(ep);
 	while (len--)
 	{
 		while (!ReadWriteAllowed())
@@ -222,119 +224,47 @@ void USB_Recv_block(u8 ep, u8* dst, int len)
 		*dst++ = Recv8();
 		if (!ReadWriteAllowed())	// release empty buffer
 			ReleaseRX();
-	}	
-}
-
-//	Non Blocking receive
-//	Return number of bytes read
-int USB_Recv(u8 ep, void* d, int len)
-{
-	if (!_usbConfiguration || len < 0)
-		return -1;
-	
-	LockEP lock(ep);
-	u8 n = FifoByteCount();
-	len = min(n,len);
-	n = len;
-	u8* dst = (u8*)d;
-	while (n--)
-		*dst++ = Recv8();
-	if (len && !FifoByteCount())	// release empty buffer
-		ReleaseRX();
-	
-	return len;
-}
-
-//	Recv 1 byte if ready
-int USB_Recv(u8 ep)
-{
-	u8 c;
-	if (USB_Recv(ep,&c,1) != 1)
-		return -1;
-	return c;
-}
-
-//	Space in send EP
-u8 USB_SendSpace(u8 ep)
-{
-	LockEP lock(ep);
-	if (!ReadWriteAllowed())
-		return 0;
-	return 64 - FifoByteCount();
+	}
 }
 
-//	Blocking Send of data to an endpoint
-int USB_Send(u8 ep, const void* d, int len)
+//	Transmit a packet to endpoint
+void Transfer(u8 ep, const u8* data, int len)
 {
-	if (!_usbConfiguration)
-		return -1;
-
-	int r = len;
-	const u8* data = (const u8*)d;
-	while (len)
+	u8 zero = ep & TRANSFER_ZERO;
+	SetEP(ep & 7);
+	while (len--)
 	{
-		u8 n = USB_SendSpace(ep);
-		if (n == 0)
-		{
-			_delay_ms(1);
-			continue;
-		}
+		while (!ReadWriteAllowed())
+			;	// TODO Check for STALL etc
 
-		if (n > len)
-			n = len;
-		len -= n;
-		{
-			LockEP lock(ep);
-			if (ep & TRANSFER_ZERO)
-			{
-				while (n--)
-					Send8(0);
-			}
-			else if (ep & TRANSFER_PGM)
-			{
-				while (n--)
-					Send8(pgm_read_byte(data++));
-			}
-			else
-			{
-				while (n--)
-					Send8(*data++);
-			}
-			if (!ReadWriteAllowed() || ((len == 0) && (ep & TRANSFER_RELEASE)))	// Release full buffer
-				ReleaseTX();
-		}
+		u8 d = (ep & TRANSFER_PGM) ? pgm_read_byte(data) : data[0];
+		data++;
+		if (zero)
+			d = 0;
+		Send8(d);
+
+		if (!ReadWriteAllowed())
+			ReleaseTX();
 	}
 	if (ep & TRANSFER_RELEASE)
 		ReleaseTX();
-	
-	TX_LED_ON();
-	TxLEDPulse = TX_RX_LED_PULSE_MS;
-	return r;
 }
 
 extern const u8 _initEndpoints[] PROGMEM;
 const u8 _initEndpoints[] = 
 {
 	0,
+
+#ifdef CDC_ENABLED
 	EP_TYPE_INTERRUPT_IN,		// CDC_ENDPOINT_ACM
 	EP_TYPE_BULK_OUT,			// CDC_ENDPOINT_OUT
 	EP_TYPE_BULK_IN,			// CDC_ENDPOINT_IN
-};
-
-#define EP_SINGLE_64 0x32	// EP0
-#define EP_DOUBLE_64 0x36	// Other endpoints
+#endif
 
-static
-void InitEP(u8 index, u8 type, u8 size)
-{
-	UENUM = index;
-	UECONX = 1;
-	UECFG0X = type;
-	UECFG1X = size;
-}
+	EP_TYPE_INTERRUPT_IN,		// HID_ENDPOINT_INT
+};
 
-static
-void InitEndpoints()
+static void InitEndpoints()
 {
 	for (u8 i = 1; i < sizeof(_initEndpoints); i++)
 	{
@@ -347,113 +277,99 @@ void InitEndpoints()
 	UERST = 0;
 }
 
-//	Handle CLASS_INTERFACE requests
-static
-bool ClassInterfaceRequest(Setup& setup)
+typedef struct
 {
-	u8 i = setup.wIndex;
-
-	if (CDC_ACM_INTERFACE == i)
-		return CDC_Setup(setup);
-
-	return false;
-}
+	u8 bmRequestType;
+	u8 bRequest;
+	u8 wValueL;
+	u8 wValueH;
+	u16 wIndex;
+	u16 wLength;
+} Setup;
+Setup _setup;
 
-int _cmark;
-int _cend;
-void InitControl(int end)
+//bool USBHook(Setup& setup)
+bool USBHook()
 {
-	SetEP(0);
-	_cmark = 0;
-	_cend = end;
-}
+	Setup& setup = _setup;
+	u8 r = setup.bRequest;
 
-static
-bool SendControl(u8 d)
-{
-	if (_cmark < _cend)
+	//	CDC Requests
+	if (CDC_GET_LINE_CODING == r)
 	{
-		if (!WaitForINOrOUT())
-			return false;
-		Send8(d);
-		if (!((_cmark + 1) & 0x3F))
-			ClearIN();	// Fifo is full, release this packet
+		Send((const volatile u8*)&_usbLineInfo,7);
 	}
-	_cmark++;
-	return true;
-};
 
-//	Clipped by _cmark/_cend
-int USB_SendControl(u8 flags, const void* d, int len)
-{
-	int sent = len;
-	const u8* data = (const u8*)d;
-	bool pgm = flags & TRANSFER_PGM;
-	while (len--)
+	else if (CDC_SET_LINE_CODING ==  r)
 	{
-		u8 c = pgm ? pgm_read_byte(data++) : *data++;
-		if (!SendControl(c))
-			return -1;
+		WaitOUT();
+		Recv((volatile u8*)&_usbLineInfo,7);
+		ClearOUT();
 	}
-	return sent;
-}
 
-//	Does not timeout or cross fifo boundaries
-//	Will only work for transfers <= 64 bytes
-//	TODO
-int USB_RecvControl(void* d, int len)
-{
-	WaitOUT();
-	Recv((u8*)d,len);
-	ClearOUT();
-	return len;
-}
+	else if (CDC_SET_CONTROL_LINE_STATE == r)
+	{
+		_usbLineInfo.lineState = setup.wValueL;
+	}
 
-int SendInterfaces()
-{
-	int total = 0;
-	u8 interfaces = 0;
-	total = CDC_GetInterface(&interfaces);
-	return interfaces;
+	return true;
 }
 
-//	Construct a dynamic configuration descriptor
-//	This really needs dynamic endpoint allocation etc
-//	TODO
-static
-bool SendConfiguration(int maxlen)
+extern const u8 _rawHID[] PROGMEM;
+#define LSB(_x) ((_x) & 0xFF)
+#define MSB(_x) ((_x) >> 8)
+
+#define RAWHID_USAGE_PAGE	0xFFC0
+#define RAWHID_USAGE		0x0C00
+#define RAWHID_TX_SIZE 64
+#define RAWHID_RX_SIZE 64
+
+const u8 _rawHID[] =
 {
-	//	Count and measure interfaces
-	InitControl(0);	
-	int interfaces = SendInterfaces();
-	ConfigDescriptor config = D_CONFIG(_cmark + sizeof(ConfigDescriptor),interfaces);
+	//	RAW HID
+	0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE),	// 30
+	0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE),
 
-	//	Now send them
-	InitControl(maxlen);
-	USB_SendControl(0,&config,sizeof(ConfigDescriptor));
-	SendInterfaces();
-	return true;
-}
+	0xA1, 0x01,				// Collection 0x01
+    0x85, 0x03,             // REPORT_ID (3)
+	0x75, 0x08,				// report size = 8 bits
+	0x15, 0x00,				// logical minimum = 0
+	0x26, 0xFF, 0x00,		// logical maximum = 255
 
-u8 _cdcComposite = 0;
+	0x95, 64,				// report count TX
+	0x09, 0x01,				// usage
+	0x81, 0x02,				// Input (array)
 
-static
-bool SendDescriptor(Setup& setup)
-{
-	u8 t = setup.wValueH;
-	if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t)
-		return SendConfiguration(setup.wLength);
+	0x95, 64,				// report count RX
+	0x09, 0x02,				// usage
+	0x91, 0x02,				// Output (array)
+	0xC0					// end collection
+};
 
-	InitControl(setup.wLength);
+u8 _cdcComposite = 0;
 
+bool SendDescriptor()
+{
+	Setup& setup = _setup;
 	u8 desc_length = 0;
 	const u8* desc_addr = 0;
-	if (USB_DEVICE_DESCRIPTOR_TYPE == t)
+
+	u8 t = setup.wValueH;
+	if (0x22 == t)
+	{
+		desc_addr = _rawHID;
+		desc_length = sizeof(desc_length);
+	} else if (USB_DEVICE_DESCRIPTOR_TYPE == t)
 	{
 		if (setup.wLength == 8)
 			_cdcComposite = 1;
 		desc_addr = _cdcComposite ?  (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor;
 	}
+	else if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t)
+	{
+		desc_addr = (const u8*)&USB_ConfigDescriptor;
+		desc_length = sizeof(USB_ConfigDescriptor);
+	}
 	else if (USB_STRING_DESCRIPTOR_TYPE == t)
 	{
 		if (setup.wValueL == 0)
@@ -464,106 +380,81 @@ bool SendDescriptor(Setup& setup)
 			desc_addr = (const u8*)&STRING_IMANUFACTURER;
 		else
 			return false;
-	}
-
-	if (desc_addr == 0)
+	} else 
 		return false;
+
 	if (desc_length == 0)
 		desc_length = pgm_read_byte(desc_addr);
-
-	USB_SendControl(TRANSFER_PGM,desc_addr,desc_length);
+	if ((u8)setup.wLength < desc_length)		// bit of a cheat limiting to 255 bytes TODO (saved 8 bytes)
+		desc_length = (u8)setup.wLength;
+
+	//	Send descriptor
+	//	EP0 is 64 bytes long
+	//	RWAL and FIFOCON don't work on EP0
+	u8 n = 0;
+	do
+	{
+		if (!WaitForINOrOUT())
+			return false;
+		Send8(pgm_read_byte(&desc_addr[n++]));
+		u8 clr = n & 0x3F;
+		if (!clr)
+			ClearIN();	// Fifo is full, release this packet
+	} while (n < desc_length);
 	return true;
 }
 
-//	Endpoint 0 interrupt
-ISR(USB_COM_vect)
+void USBSetupInterrupt()
 {
     SetEP(0);
 	if (!ReceivedSetupInt())
 		return;
 
-	Setup setup;
+	Setup& setup = _setup;	// global saves ~30 bytes
 	Recv((u8*)&setup,8);
 	ClearSetupInt();
 
-	u8 requestType = setup.bmRequestType;
-	if (requestType & REQUEST_DEVICETOHOST)
+	if (setup.bmRequestType & DEVICETOHOST)
 		WaitIN();
 	else
 		ClearIN();
 
     bool ok = true;
-	if (REQUEST_STANDARD == (requestType & REQUEST_TYPE))
+	u8 r = setup.bRequest;
+	if (SET_ADDRESS == r)
 	{
-		//	Standard Requests
-		u8 r = setup.bRequest;
-		if (GET_STATUS == r)
-		{
-			Send8(0);		// TODO
-			Send8(0);
-		}
-		else if (CLEAR_FEATURE == r)
-		{
-		}
-		else if (SET_FEATURE == r)
-		{
-		}
-		else if (SET_ADDRESS == r)
-		{
-			WaitIN();
-			UDADDR = setup.wValueL | (1<<ADDEN);
-		}
-		else if (GET_DESCRIPTOR == r)
-		{
-			ok = SendDescriptor(setup);
-		}
-		else if (SET_DESCRIPTOR == r)
-		{
-			ok = false;
-		}
-		else if (GET_CONFIGURATION == r)
-		{
-			Send8(1);
-		}
-		else if (SET_CONFIGURATION == r)
-		{
-			if (REQUEST_DEVICE == (requestType & REQUEST_RECIPIENT))
-			{
-				InitEndpoints();
-				_usbConfiguration = setup.wValueL;
-			} else
-				ok = false;
-		}
-		else if (GET_INTERFACE == r)
-		{
-		}
-		else if (SET_INTERFACE == r)
-		{
-		}
+		WaitIN();
+		UDADDR = setup.wValueL | (1<<ADDEN);
+	}
+	else if (SET_CONFIGURATION == r)
+	{
+		_usbConfiguration = setup.wValueL;
+		InitEndpoints();
+	}
+	else if (GET_CONFIGURATION == r)
+	{
+		Send8(_usbConfiguration);
+	}
+	else if (GET_STATUS == r)
+	{
+		Send8(0);		// All good as far as I know
+	}
+	else if (GET_DESCRIPTOR == r)
+	{
+		ok = SendDescriptor();
 	}
 	else
 	{
-		InitControl(setup.wLength);		//	Max length of transfer
-		ok = ClassInterfaceRequest(setup);
+		ok = USBHook();
 	}
 
 	if (ok)
 		ClearIN();
 	else
-	{
 		Stall();
-	}
 }
 
-void USB_Flush(u8 ep)
-{
-	SetEP(ep);
-	if (FifoByteCount())
-		ReleaseTX();
-}
-
-//	General interrupt
-ISR(USB_GEN_vect)
+void USBGeneralInterrupt()
 {
 	u8 udint = UDINT;
 	UDINT = 0;
@@ -573,67 +464,45 @@ ISR(USB_GEN_vect)
 	{
 		InitEP(0,EP_TYPE_CONTROL,EP_SINGLE_64);	// init ep0
 		_usbConfiguration = 0;			// not configured yet
-		UEIENX = 1 << RXSTPE;			// Enable interrupts for ep0
 	}
 
 	//	Start of Frame - happens every millisecond so we use it for TX and RX LED one-shot timing, too
 	if (udint & (1<<SOFI))
 	{
-		USB_Flush(CDC_TX);				// Send a tx frame if found
-		
 		// check whether the one-shot period has elapsed.  if so, turn off the LED
 		if (TxLEDPulse && !(--TxLEDPulse))
-			TX_LED_OFF();
+			TXLED0;
 		if (RxLEDPulse && !(--RxLEDPulse))
-			RX_LED_OFF();
+			RXLED0;
+		
+		if (!_ejected)
+			_timeout = 0;
 	}
 }
 
-//	VBUS or counting frames
-//	Any frame counting?
-u8 USBConnected()
-{
-	u8 f = UDFNUML;
-//	delay(3);
-	_delay_ms(3);
-	return f != UDFNUML;
-}
-
-//=======================================================================
-//=======================================================================
-
-USB_ USB;
-
-USB_::USB_()
+void LEDPulse();
+int USBGetChar()
 {
-}
-
-void USB_::attach()
-{
-	_usbConfiguration = 0;
-	UHWCON = 0x01;						// power internal reg
-	USBCON = (1<<USBE)|(1<<FRZCLK);		// clock frozen, usb enabled
-	PLLCSR = 0x12;						// Need 16 MHz xtal
-	while (!(PLLCSR & (1<<PLOCK)))		// wait for lock pll
-		;
-	USBCON = ((1<<USBE)|(1<<OTGPADE));	// start USB clock
-	UDIEN = (1<<EORSTE)|(1<<SOFE);		// Enable interrupts for EOR (End of Reset) and SOF (start of frame)
-	UDCON = 0;							// enable attach resistor
-}
-
-void USB_::detach()
-{
-}
-
-//	Check for interrupts
-//	TODO: VBUS detection
-bool USB_::configured()
-{
-	return _usbConfiguration;
-}
+	for(;;)
+	{
+		USBSetupInterrupt();
+		USBGeneralInterrupt();
 
-void USB_::poll()
-{
+		//	Read a char
+		if (HasData(CDC_RX))
+		{
+			u8 c = Recv8();
+			if (!ReadWriteAllowed())
+				ReleaseRX();
+			return c;
+		} 
+
+		if (!--_timeout) {
+			Reboot();	// USB not connected, run firmware
+		}
+		
+		_delay_us(100);	// stretch out the bootloader period to about 5 seconds after enumeration
+		LEDPulse();
+	}
+	return -1;
 }
-
-#endif /* if defined(USBCON) */
diff --git a/bootloaders/diskloader/src/USBCore.h b/bootloaders/diskloader/src/USBCore.h
index 511b57c..537c0ec 100644
--- a/bootloaders/diskloader/src/USBCore.h
+++ b/bootloaders/diskloader/src/USBCore.h
@@ -18,42 +18,29 @@
 #ifndef __USBCORE_H__
 #define __USBCORE_H__
 
-//	Standard requests
 #define GET_STATUS			0
 #define CLEAR_FEATURE		1
 #define SET_FEATURE			3
 #define SET_ADDRESS			5
 #define GET_DESCRIPTOR		6
-#define SET_DESCRIPTOR		7
 #define GET_CONFIGURATION	8
 #define SET_CONFIGURATION	9
 #define GET_INTERFACE		10
 #define SET_INTERFACE		11
 
-
 // bmRequestType
-#define REQUEST_HOSTTODEVICE	0x00
-#define REQUEST_DEVICETOHOST	0x80
-#define REQUEST_DIRECTION		0x80
-
-#define REQUEST_STANDARD		0x00
-#define REQUEST_CLASS			0x20
-#define REQUEST_VENDOR			0x40
-#define REQUEST_TYPE			0x60
-
-#define REQUEST_DEVICE			0x00
-#define REQUEST_INTERFACE		0x01
-#define REQUEST_ENDPOINT		0x02
-#define REQUEST_OTHER			0x03
-#define REQUEST_RECIPIENT		0x03
-
-#define REQUEST_DEVICETOHOST_CLASS_INTERFACE  (REQUEST_DEVICETOHOST + REQUEST_CLASS + REQUEST_INTERFACE)
-#define REQUEST_HOSTTODEVICE_CLASS_INTERFACE  (REQUEST_HOSTTODEVICE + REQUEST_CLASS + REQUEST_INTERFACE)
-
-//	Class requests
-
-#define CDC_SET_LINE_CODING			0x20
-#define CDC_GET_LINE_CODING			0x21
+#define HOSTTODEVICE	0x00
+#define DEVICETOHOST	0x80
+#define STANDARD		0x00
+#define CLASS			0x20
+#define VENDOR			0x40
+#define DEVICE			0x00
+#define INTERFACE		0x01
+#define ENDPOINT		0x02
+#define OTHER			0x03
+
+#define CDC_SET_LINE_CODING		0x20
+#define CDC_GET_LINE_CODING		0x21
 #define CDC_SET_CONTROL_LINE_STATE	0x22
 
 //	Descriptors
@@ -107,6 +94,7 @@
 #define CDC_CS_ENDPOINT                         0x25
 #define CDC_DATA_INTERFACE_CLASS                0x0A
 
+
 //	Device
 typedef struct {
 	u8 len;				// 18
@@ -198,32 +186,14 @@ typedef struct
 
 typedef struct 
 {
-    u8	len;
-    u8 	dtype;		// 0x24
-    u8 	subtype;	// 1
-    u8 	bmCapabilities;
-    u8 	bDataInterface;
-} CMFunctionalDescriptor;
-	
-typedef struct 
-{
-    u8	len;
-    u8 	dtype;		// 0x24
-    u8 	subtype;	// 1
-    u8 	bmCapabilities;
-} ACMFunctionalDescriptor;
-
-typedef struct 
-{
-	//	IAD
 	IADDescriptor				iad;	// Only needed on compound device
 
 	//	Control
 	InterfaceDescriptor			cif;	// 
 	CDCCSInterfaceDescriptor	header;
-	CMFunctionalDescriptor		callManagement;			// Call Management
-	ACMFunctionalDescriptor		controlManagement;		// ACM
-	CDCCSInterfaceDescriptor	functionalDescriptor;	// CDC_UNION
+	CDCCSInterfaceDescriptor	callManagement;
+	CDCCSInterfaceDescriptor4	controlManagement;
+	CDCCSInterfaceDescriptor	functionalDescriptor;
 	EndpointDescriptor			cifin;
 
 	//	Data
@@ -232,11 +202,31 @@ typedef struct
 	EndpointDescriptor			out;
 } CDCDescriptor;
 
+typedef struct
+{
+	u8 len;			// 9
+	u8 dtype;		// 0x21
+	u8 addr;
+	u8	versionL;	// 0x101
+	u8	versionH;	// 0x101
+	u8	country;
+	u8	desctype;	// 0x22 report
+	u8	descLenL;
+	u8	descLenH;
+} HIDDescDescriptor;
+
+typedef struct 
+{
+	InterfaceDescriptor			hid;
+	HIDDescDescriptor			desc;
+	EndpointDescriptor			in;
+} HIDDescriptor;
+
 #define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \
 	{ 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs }
 
 #define D_CONFIG(_totalLength,_interfaces) \
-	{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) }
+	{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(100) }
 
 #define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \
 	{ 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 }
@@ -247,8 +237,10 @@ typedef struct
 #define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \
 	{ 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 }
 
+#define D_HIDREPORT(_descriptorLength) \
+	{ 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 }
+
 #define D_CDCCS(_subtype,_d0,_d1)	{ 5, 0x24, _subtype, _d0, _d1 }
 #define D_CDCCS4(_subtype,_d0)		{ 4, 0x24, _subtype, _d0 }
 
-
 #endif
\ No newline at end of file
diff --git a/bootloaders/diskloader/src/USBDesc.cpp b/bootloaders/diskloader/src/USBDesc.cpp
new file mode 100644
index 0000000..c8ea9c6
--- /dev/null
+++ b/bootloaders/diskloader/src/USBDesc.cpp
@@ -0,0 +1,82 @@
+
+
+/* Copyright (c) 2011, Peter Barrett  
+**  
+** Permission to use, copy, modify, and/or distribute this software for  
+** any purpose with or without fee is hereby granted, provided that the  
+** above copyright notice and this permission notice appear in all copies.  
+** 
+** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL  
+** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED  
+** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR  
+** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES  
+** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,  
+** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
+** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS  
+** SOFTWARE.  
+*/
+
+#include "Platform.h"
+
+//====================================================================================================
+//====================================================================================================
+//	Actual device descriptors
+
+const u16 STRING_LANGUAGE[2] = {
+	(3<<8) | (2+2),
+	0x0409	// English
+};
+
+
+const u16 STRING_IPRODUCT[28] = {
+	(3<<8) | (2+2*27),
+#if USB_PID == USB_PID_LEONARDO	
+	'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o',' ','b','o','o','t','l','o','a','d','e','r'
+#elif USB_PID == USB_PID_MICRO
+	'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ','b','o','o','t','l','o','a','d','e','r',' ',' ',' '
+#endif
+};
+
+const u16 STRING_IMANUFACTURER[12] = {
+	(3<<8) | (2+2*11),
+	'A','r','d','u','i','n','o',' ','L','L','C'
+};
+
+
+//#ifdef CDC_ENABLED
+DeviceDescriptor USB_DeviceDescriptorA = D_DEVICE(0X02,0X00,0X00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
+//#else
+DeviceDescriptor USB_DeviceDescriptor = D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
+//#endif
+
+Config USB_ConfigDescriptor =
+{
+	D_CONFIG(sizeof(Config),INTERFACE_COUNT),
+
+#ifdef CDC_ENABLED
+	//	CDC
+	{
+		D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
+
+		//	CDC communication interface
+		D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
+		D_CDCCS(CDC_HEADER,0x10,0x01),								// Header (1.10 bcd)
+		D_CDCCS(CDC_CALL_MANAGEMENT,1,1),							// Device handles call management
+		D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,2),				// SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
+		D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE),	// Communication interface is master, data interface is slave 0
+		D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
+
+		//	CDC data interface
+		D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
+		D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
+		D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
+	},
+#endif
+	// HID
+	{
+		D_INTERFACE(HID_INTERFACE,1,3,0,0),
+		D_HIDREPORT(30),
+		D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x40)
+	}
+};
+
diff --git a/bootloaders/diskloader/src/USBDesc.h b/bootloaders/diskloader/src/USBDesc.h
index 588a40c..094dba5 100644
--- a/bootloaders/diskloader/src/USBDesc.h
+++ b/bootloaders/diskloader/src/USBDesc.h
@@ -16,19 +16,48 @@
 ** SOFTWARE.  
 */
 
-#define CDC_INTERFACE_COUNT	2
-#define CDC_ENPOINT_COUNT	3
+
+#ifdef CDC_ENABLED
 
 #define CDC_ACM_INTERFACE	0	// CDC ACM
 #define CDC_DATA_INTERFACE	1	// CDC Data
-#define CDC_FIRST_ENDPOINT	1
-#define CDC_ENDPOINT_ACM	(CDC_FIRST_ENDPOINT)							// CDC First
-#define CDC_ENDPOINT_OUT	(CDC_FIRST_ENDPOINT+1)
-#define CDC_ENDPOINT_IN		(CDC_FIRST_ENDPOINT+2)
+#define CDC_ENDPOINT_ACM	1
+#define CDC_ENDPOINT_OUT	2
+#define CDC_ENDPOINT_IN		3
 
-#define CDC_RX CDC_ENDPOINT_OUT
-#define CDC_TX CDC_ENDPOINT_IN
+#define HID_INTERFACE		2	// HID Interface
+#define HID_ENDPOINT_INT	4
+
+#define INTERFACE_COUNT		3	// 2 for cdc + 1 for hid
+
+#else 
+
+#define HID_INTERFACE		2	// HID Interface
+#define HID_ENDPOINT_INT	4
+
+#define INTERFACE_COUNT		1	// 1 for hid
+
+#endif
+
+typedef struct
+{
+	ConfigDescriptor	config;
+#ifdef CDC_ENABLED
+	CDCDescriptor		cdc;
+#endif
+	HIDDescriptor		hid;
+} Config;
+
+extern Config USB_ConfigDescriptor PROGMEM;
+extern DeviceDescriptor USB_DeviceDescriptor PROGMEM;
+extern DeviceDescriptor USB_DeviceDescriptorA PROGMEM;
+
+extern const u16 STRING_LANGUAGE[2] PROGMEM;
+extern const u16 STRING_IPRODUCT[28] PROGMEM;
+extern const u16 STRING_IMANUFACTURER[12] PROGMEM;
 
 #define IMANUFACTURER	1
 #define IPRODUCT		2
 
+#define CDC_TX CDC_ENDPOINT_IN
+#define CDC_RX CDC_ENDPOINT_OUT
\ No newline at end of file
diff --git a/cores/arduino/CDC.cpp b/cores/arduino/CDC.cpp
index b8df09f..14a0eae 100644
--- a/cores/arduino/CDC.cpp
+++ b/cores/arduino/CDC.cpp
@@ -27,7 +27,7 @@ void Reboot()
 {
 	USB.detach();
 	cli();
-	asm volatile("jmp 0x7000");		// jump to bootloader - DiskLoader lives in the last 4kB of Flash
+	asm volatile("jmp 0x7800");		// jump to bootloader - DiskLoader takes up last 2 kB
 }
 
 typedef struct