diff options
| -rw-r--r-- | Makefile | 10 | ||||
| -rw-r--r-- | make-scripts/Arduino.mk | 1358 | ||||
| -rw-r--r-- | make-scripts/Common.mk | 138 | ||||
| -rw-r--r-- | make-scripts/license.txt | 502 | ||||
| -rw-r--r-- | tools/reset_leonardo.py | 109 |
5 files changed, 2117 insertions, 0 deletions
diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..65fcacf --- /dev/null +++ b/Makefile @@ -0,0 +1,10 @@ +ARDUINO_VERSION = 1.8.4 +BOARD_TAG = leonardo +ARCHITECTURE = avr +ARDUINO_DIR = $(HOME).arduino15/packages/arduino +ARDMK_DIR = make-scripts +AVRDUDE_CONF = /etc/avrdude.conf + +ARDUINO_LIBS = Wire GY521 + +include $(ARDMK_DIR)/Arduino.mk diff --git a/make-scripts/Arduino.mk b/make-scripts/Arduino.mk new file mode 100644 index 0000000..908966b --- /dev/null +++ b/make-scripts/Arduino.mk @@ -0,0 +1,1358 @@ +# +# Makefile for compiling Arduino sketches from command line +# System part (i.e. project independent) +# +# Copyright (C) 2012 Sudar <http://sudarmuthu.com>, based on +# M J Oldfield work: https://github.com/mjoldfield/Arduino-Makefile +# +# Copyright (C) 2010,2011,2012 Martin Oldfield <m@mjo.tc>, based on +# work that is copyright Nicholas Zambetti, David A. Mellis & Hernando +# Barragan. +# +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# Adapted from Arduino 0011 Makefile by M J Oldfield +# +# Original Arduino adaptation by mellis, eighthave, oli.keller +# +# Current version: 1.6.0 +# + +arduino_output = +# When output is not suppressed and we're in the top-level makefile, +# running for the first time (i.e., not after a restart after +# regenerating the dependency file), then output the configuration. +ifndef ARDUINO_QUIET + ARDUINO_QUIET = 0 +endif +ifeq ($(ARDUINO_QUIET),0) + ifeq ($(MAKE_RESTARTS),) + ifeq ($(MAKELEVEL),0) + arduino_output = $(info $(1)) + endif + endif +endif + +include $(ARDMK_DIR)/Common.mk + +$(call show_config_variable,ARDMK_DIR,[USER]) + +ifndef TARGET + space := + space += + TARGET = $(notdir $(subst $(space),_,$(CURDIR))) +endif + +$(call show_config_variable,ARDUINO_VERSION,[USER]) + +ifdef ARDUINO_VERSION + ARDUINO_VERSION_SHORT = $(shell sed "s/\.//g" <<< $(ARDUINO_VERSION)) + $(call show_config_variable,ARDUINO_VERSION_SHORT,[AUTODETECTED]) +endif + +$(call show_config_variable,ARCHITECTURE,[USER]) + +#avoid using shell for known architectures +ifeq ($(ARCHITECTURE),avr) + ARDUINO_ARCH_FLAG = -DARDUINO_ARCH_AVR +else + ARDUINO_ARCH_FLAG = -DARDUINO_ARCH_$(shell echo $(ARCHITECTURE) | tr '[:lower:]' '[:upper:]') +endif + +ARDMK_VENDOR = arduino + +$(call show_config_variable,ARDMK_VENDOR,[DEFAULT]) + +ARDUINO_VAR_PATH = $(ARDUINO_DIR)/hardware/$(ARCHITECTURE)/$(ARDUINO_VERSION)/variants +$(call show_config_variable,ARDUINO_VAR_PATH,[COMPUTED],(from ARDUINO_DIR)) + +BOARDS_TXT = $(ARDUINO_DIR)/hardware/$(ARCHITECTURE)/$(ARDUINO_VERSION)/boards.txt +$(call show_config_variable,BOARDS_TXT,[COMPUTED],(from ARDUINO_DIR)) + +ifeq (,$(wildcard $(BOARDS_TXT))) + $(error Currently BOARDS_TXT='$(BOARDS_TXT)', which is not an existing file or an invalid filename.) +endif + +TOOL_PREFIX = avr + +CC_NAME := $(TOOL_PREFIX)-gcc +CXX_NAME := $(TOOL_PREFIX)-g++ +AS_NAME := $(TOOL_PREFIX)-as +OBJCOPY_NAME := $(TOOL_PREFIX)-objcopy +OBJDUMP_NAME := $(TOOL_PREFIX)-objdump +AR_NAME := $(TOOL_PREFIX)-ar +SIZE_NAME := $(TOOL_PREFIX)-size +NM_NAME := $(TOOL_PREFIX)-nm + +ifndef AVR_TOOLS_DIR + + BUNDLED_AVR_TOOLS_DIR := $(call dir_if_exists,$(ARDUINO_DIR)/hardware/tools/avr) + + ifdef BUNDLED_AVR_TOOLS_DIR + AVR_TOOLS_DIR = $(BUNDLED_AVR_TOOLS_DIR) + $(call show_config_variable,AVR_TOOLS_DIR,[BUNDLED],(in Arduino distribution)) + + # In Linux distribution of Arduino, the path to avrdude and avrdude.conf are different + # More details at https://github.com/sudar/Arduino-Makefile/issues/48 and + # https://groups.google.com/a/arduino.cc/d/msg/developers/D_m97jGr8Xs/uQTt28KO_8oJ + ifeq ($(CURRENT_OS),LINUX) + + ifndef AVRDUDE + ifeq ($(shell expr $(ARDUINO_VERSION_SHORT) '>' 157), 1) + # 1.5.8 has different location than all prior versions! + AVRDUDE = $(AVR_TOOLS_DIR)/bin/avrdude + else + AVRDUDE = $(AVR_TOOLS_DIR)/../avrdude + endif + endif + + ifndef AVRDUDE_CONF + ifeq ($(shell expr $(ARDUINO_VERSION_SHORT) '>' 157), 1) + AVRDUDE_CONF = $(AVR_TOOLS_DIR)/etc/avrdude.conf + else + AVRDUDE_CONF = $(AVR_TOOLS_DIR)/../avrdude.conf + endif + endif + + else + + ifndef AVRDUDE_CONF + AVRDUDE_CONF = $(AVR_TOOLS_DIR)/etc/avrdude.conf + endif + + endif + + else + + SYSTEMPATH_AVR_TOOLS_DIR := $(call dir_if_exists,$(abspath $(dir $(shell which $(CC_NAME)))/..)) + ifdef SYSTEMPATH_AVR_TOOLS_DIR + AVR_TOOLS_DIR = $(SYSTEMPATH_AVR_TOOLS_DIR) + $(call show_config_variable,AVR_TOOLS_DIR,[AUTODETECTED],(found in $$PATH)) + else + # One last attempt using $(TOOL_PREFIX)-gcc in case using arm + SYSTEMPATH_AVR_TOOLS_DIR := $(call dir_if_exists,$(abspath $(dir $(shell which $($(TOOL_PREFIX)-gcc)))/..)) + ifdef SYSTEMPATH_AVR_TOOLS_DIR + AVR_TOOLS_DIR = $(SYSTEMPATH_AVR_TOOLS_DIR) + $(call show_config_variable,AVR_TOOLS_DIR,[AUTODETECTED],(found in $$PATH)) + else + echo $(error No AVR tools directory found) + endif + endif # SYSTEMPATH_AVR_TOOLS_DIR + + endif # BUNDLED_AVR_TOOLS_DIR + +else + $(call show_config_variable,AVR_TOOLS_DIR,[USER]) + + # ensure we can still find avrdude.conf + ifndef AVRDUDE_CONF + ifeq ($(shell expr $(ARDUINO_VERSION_SHORT) '>' 157), 1) + AVRDUDE_CONF = $(AVR_TOOLS_DIR)/etc/avrdude.conf + else + AVRDUDE_CONF = $(AVR_TOOLS_DIR)/../avrdude.conf + endif + endif + +endif + +TOOLS_PATH = $(ARDUINO_DIR)/tools/avr-gcc/$(shell /bin/ls --color=never -1 $(ARDUINO_DIR)/tools/avr-gcc/ | sort -r | xargs | awk '{print $$1}')/bin + +ARDUINO_LIB_PATH = $(ARDUINO_DIR)/libraries +$(call show_config_variable,ARDUINO_LIB_PATH,[COMPUTED],(from ARDUINO_DIR)) + +ifeq ($(shell expr $(ARDUINO_VERSION_SHORT) '>' 150), 1) + ARDUINO_PLATFORM_LIB_PATH = $(ARDUINO_DIR)/hardware/$(ARCHITECTURE)/$(ARDUINO_VERSION)/libraries + $(call show_config_variable,ARDUINO_PLATFORM_LIB_PATH,[COMPUTED],(from ARDUINO_DIR)) +endif + +PROJ_LIBS_PATH = libraries +$(call show_config_variable,PROJ_LIBS_PATH,[DEFAULT]) + +PRE_BUILD_HOOK = pre-build-hook.sh +$(call show_config_variable,PRE_BUILD_HOOK,[DEFAULT]) + +######################################################################## +# boards.txt parsing + +ifdef BOARD_SUB + BOARD_SUB := $(strip $(BOARD_SUB)) + $(call show_config_variable,BOARD_SUB,[USER]) +endif + +BOARD_TAG := $(strip $(BOARD_TAG)) +$(call show_config_variable,BOARD_TAG,[USER]) + +ifdef BOARD_CLOCK + BOARD_CLOCK := $(strip $(BOARD_CLOCK)) + $(call show_config_variable,BOARD_CLOCK,[USER]) +endif + +# If NO_CORE is set, then we don't have to parse boards.txt file +# But the user might have to define MCU, F_CPU etc +ifeq ($(strip $(NO_CORE)),) + + # Select a core from the 'cores' directory. Two main values: 'arduino' or + # 'robot', but can also hold 'tiny', for example, if using + # https://code.google.com/p/arduino-tiny alternate core. + ifndef CORE + CORE = $(call PARSE_BOARD,$(BOARD_TAG),build.core) + $(call show_config_variable,CORE,[COMPUTED],(from build.core)) + else + $(call show_config_variable,CORE,[USER]) + endif + + # Which variant ? This affects the include path + ifndef VARIANT + VARIANT := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).build.variant) + ifndef VARIANT + VARIANT := $(call PARSE_BOARD,$(BOARD_TAG),build.variant) + endif + $(call show_config_variable,VARIANT,[COMPUTED],(from build.variant)) + else + $(call show_config_variable,VARIANT,[USER]) + endif + + ifndef BOARD + BOARD := $(call PARSE_BOARD,$(BOARD_TAG),build.board) + ifndef BOARD + BOARD := $(shell echo $(ARCHITECTURE)_$(BOARD_TAG) | tr '[:lower:]' '[:upper:]') + endif + $(call show_config_variable,BOARD,[COMPUTED],(from build.board)) + else + $(call show_config_variable,BOARD,[USER]) + endif + + # see if we are a caterina device like leonardo or micro + CATERINA := $(findstring caterina,$(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).bootloader.file)) + ifndef CATERINA + # 1.5+ method if not a submenu + CATERINA := $(findstring caterina,$(call PARSE_BOARD,$(BOARD_TAG),bootloader.file)) + endif + ifndef CATERINA + # 1.0 method uses deprecated bootloader.path + CATERINA := $(findstring caterina,$(call PARSE_BOARD,$(BOARD_TAG),bootloader.path)) + endif + + # processor stuff + ifndef MCU + MCU := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).build.mcu) + ifndef MCU + MCU := $(call PARSE_BOARD,$(BOARD_TAG),build.mcu) + endif + endif + + ifndef F_CPU + ifdef BOARD_CLOCK + F_CPU := $(call PARSE_BOARD,$(BOARD_TAG),menu.(speed|clock).$(BOARD_CLOCK).build.f_cpu) + endif + ifndef F_CPU + F_CPU := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).build.f_cpu) + endif + ifndef F_CPU + F_CPU := $(call PARSE_BOARD,$(BOARD_TAG),build.f_cpu) + endif + endif + + ifneq ($(CATERINA),) + # USB IDs for the caterina devices like leonardo or micro + ifndef USB_VID + USB_VID = $(call PARSE_BOARD,$(BOARD_TAG),build.vid) + endif + + # coping with 2-3 methods sparkfun use for usb.pid + ifndef USB_PID + USB_PID := $(call PARSE_BOARD,$(BOARD_TAG),build.pid) + ifndef USB_PID + USB_PID := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).build.pid) + endif + endif + + ifndef USB_PRODUCT + USB_PRODUCT := $(call PARSE_BOARD,$(BOARD_TAG),build.usb_product) + ifdef USB_PRODUCT + $(call show_config_variable,USB_PRODUCT,[COMPUTED]) + endif + endif + + ifndef USB_MANUFACTURER + USB_MANUFACTURER := $(call PARSE_BOARD,$(BOARD_TAG),build.usb_manufacturer) + ifndef USB_MANUFACTURER + USB_MANUFACTURER = "Unknown" + else + $(call show_config_variable,USB_MANUFACTURER,[COMPUTED]) + endif + endif + endif + + # normal programming info + ifndef AVRDUDE_ARD_PROGRAMMER + AVRDUDE_ARD_PROGRAMMER := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).upload.protocol) + ifndef AVRDUDE_ARD_PROGRAMMER + AVRDUDE_ARD_PROGRAMMER := $(call PARSE_BOARD,$(BOARD_TAG),upload.protocol) + endif + endif + + ifndef AVRDUDE_ARD_BAUDRATE + AVRDUDE_ARD_BAUDRATE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).upload.speed) + ifndef AVRDUDE_ARD_BAUDRATE + AVRDUDE_ARD_BAUDRATE := $(call PARSE_BOARD,$(BOARD_TAG),upload.speed) + endif + endif + + # fuses if you're using e.g. ISP + ifndef ISP_LOCK_FUSE_PRE + ISP_LOCK_FUSE_PRE = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.unlock_bits) + endif + + ifndef ISP_HIGH_FUSE + ifdef BOARD_CLOCK + ISP_HIGH_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(speed|clock).$(BOARD_CLOCK).bootloader.high_fuses) + endif + ifndef ISP_HIGH_FUSE + ISP_HIGH_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).bootloader.high_fuses) + endif + ifndef ISP_HIGH_FUSE + ISP_HIGH_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.high_fuses) + endif + endif + + ifndef ISP_LOW_FUSE + ifdef BOARD_CLOCK + ISP_LOW_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(speed|clock).$(BOARD_CLOCK).bootloader.low_fuses) + endif + ifndef ISP_LOW_FUSE + ISP_LOW_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).bootloader.low_fuses) + endif + ifndef ISP_LOW_FUSE + ISP_LOW_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.low_fuses) + endif + endif + + ifndef ISP_EXT_FUSE + ifdef BOARD_CLOCK + ISP_EXT_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(speed|clock).$(BOARD_CLOCK).bootloader.extended_fuses) + endif + ifndef ISP_EXT_FUSE + ISP_EXT_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).bootloader.extended_fuses) + endif + ifndef ISP_EXT_FUSE + ISP_EXT_FUSE := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.extended_fuses) + endif + endif + + ifndef BOOTLOADER_PATH + BOOTLOADER_PATH = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.path) + endif + + ifndef BOOTLOADER_FILE + BOOTLOADER_FILE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).bootloader.file) + ifndef BOOTLOADER_FILE + BOOTLOADER_FILE := $(call PARSE_BOARD,$(BOARD_TAG),bootloader.file) + endif + endif + + ifndef ISP_LOCK_FUSE_POST + ISP_LOCK_FUSE_POST = $(call PARSE_BOARD,$(BOARD_TAG),bootloader.lock_bits) + endif + + ifndef HEX_MAXIMUM_SIZE + HEX_MAXIMUM_SIZE := $(call PARSE_BOARD,$(BOARD_TAG),menu.(chip|cpu).$(BOARD_SUB).upload.maximum_size) + ifndef HEX_MAXIMUM_SIZE + HEX_MAXIMUM_SIZE := $(call PARSE_BOARD,$(BOARD_TAG),upload.maximum_size) + endif + endif + +endif + +# Everything gets built in here (include BOARD_TAG now) +ifndef OBJDIR + OBJDIR = build + $(call show_config_variable,OBJDIR,[COMPUTED],(from BOARD_TAG)) +else + $(call show_config_variable,OBJDIR,[USER]) +endif + +# Now that we have ARDUINO_DIR, ARDMK_VENDOR, ARCHITECTURE and CORE, +# we can set ARDUINO_CORE_PATH. +ifndef ARDUINO_CORE_PATH + ifeq ($(strip $(CORE)),) + ARDUINO_CORE_PATH = $(ARDUINO_DIR)/hardware/$(ARCHITECTURE)/$(ARDUINO_VERSION)/cores/arduino + $(call show_config_variable,ARDUINO_CORE_PATH,[DEFAULT]) + else + ARDUINO_CORE_PATH = $(ALTERNATE_CORE_PATH)/cores/$(CORE) + ifeq ($(wildcard $(ARDUINO_CORE_PATH)),) + ARDUINO_CORE_PATH = $(ARDUINO_DIR)/hardware/$(ARCHITECTURE)/$(ARDUINO_VERSION)/cores/$(CORE) + $(call show_config_variable,ARDUINO_CORE_PATH,[COMPUTED],(from ARDUINO_DIR, BOARD_TAG and boards.txt)) + else + $(call show_config_variable,ARDUINO_CORE_PATH,[COMPUTED],(from ALTERNATE_CORE_PATH, BOARD_TAG and boards.txt)) + endif + endif +else + $(call show_config_variable,ARDUINO_CORE_PATH,[USER]) +endif + +######################################################################## +# Reset + +ifndef RESET_CMD + ARD_RESET_ARDUINO_PATH = tools/reset_leonardo.py + ARD_RESET_ARDUINO := $(PYTHON_CMD) $(ARD_RESET_ARDUINO_PATH) + RESET_CMD = $(ARD_RESET_ARDUINO) $(DEVICE_PATH) + $(call show_config_variable,RESET_CMD,[COMPUTED],(from PYTHON_CMD, ARD_RESET_OPTS and MONITOR_PORT)) +else + $(call show_config_variable,RESET_CMD,[USER]) +endif + +ifneq ($(CATERINA),) + ERROR_ON_CATERINA = $(error On $(BOARD_TAG), raw_xxx operation is not supported) +else + ERROR_ON_CATERINA = +endif + +######################################################################## +# Local sources + +LOCAL_SRCS ?= $(wildcard src/*.cpp) +LOCAL_OBJ_FILES = $(LOCAL_SRCS:.cpp=.cpp.o) +LOCAL_OBJS = $(patsubst %,$(OBJDIR)/%,$(LOCAL_OBJ_FILES)) + +ifeq ($(words $(LOCAL_SRCS)), 0) + $(error At least one source file is needed) +endif + +# core sources +ifeq ($(strip $(NO_CORE)),) + ifdef ARDUINO_CORE_PATH + CORE_C_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.c) + CORE_C_SRCS += $(wildcard $(ARDUINO_CORE_PATH)/$(TOOL_PREFIX)-libc/*.c) + CORE_CPP_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.cpp) + CORE_AS_SRCS = $(wildcard $(ARDUINO_CORE_PATH)/*.S) + + # ArduinoCore-API + CORE_C_SRCS += $(wildcard $(ARDUINO_CORE_PATH)/api/*.c) + CORE_CPP_SRCS += $(wildcard $(ARDUINO_CORE_PATH)/api/*.cpp) + + # USB Core if samd or sam + ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) + CORE_C_SRCS += $(wildcard $(ARDUINO_CORE_PATH)/avr/*.c) # avr core emulation files + CORE_C_SRCS += $(wildcard $(ARDUINO_CORE_PATH)/USB/*.c) + CORE_CPP_SRCS += $(wildcard $(ARDUINO_CORE_PATH)/USB/*.cpp) + endif + + ifneq ($(strip $(NO_CORE_MAIN_CPP)),) + CORE_CPP_SRCS := $(filter-out %main.cpp, $(CORE_CPP_SRCS)) + $(call show_config_info,NO_CORE_MAIN_CPP set so core library will not include main.cpp,[MANUAL]) + endif + + # Add core files for sam devices in CORE_OJBS filtering specific paths + ifdef SAM_CORE_PATH + SAM_CORE_OBJ_FILES = $(SAM_CORE_C_SRCS:.c=.c.o) $(SAM_CORE_CPP_SRCS:.cpp=.cpp.o) $(SAM_CORE_AS_SRCS:.S=.S.o) + # variant core files + CORE_OBJS += $(patsubst $(SAM_CORE_PATH)/%, \ + $(OBJDIR)/core/%, $(filter $(SAM_CORE_PATH)/%, $(SAM_CORE_OBJ_FILES))) + # libsam on Due + ifdef SAM_LIBSAM_PATH + CORE_OBJS += $(patsubst $(SAM_LIBSAM_PATH)/source/%, \ + $(OBJDIR)/core/%, $(filter $(SAM_LIBSAM_PATH)/source/%, $(SAM_CORE_OBJ_FILES))) + endif + # chip sources on Due + ifdef SAM_SYSTEM_PATH + CORE_OBJS += $(patsubst $(SAM_SYSTEM_PATH)/source/%, \ + $(OBJDIR)/core/%, $(filter $(SAM_SYSTEM_PATH)/source/%, $(SAM_CORE_OBJ_FILES))) + endif + endif + + CORE_OBJ_FILES = $(CORE_C_SRCS:.c=.c.o) $(CORE_CPP_SRCS:.cpp=.cpp.o) $(CORE_AS_SRCS:.S=.S.o) + CORE_OBJS += $(patsubst $(ARDUINO_CORE_PATH)/%, \ + $(OBJDIR)/core/%,$(CORE_OBJ_FILES)) + endif +else + $(call show_config_info,NO_CORE set so core library will not be built,[MANUAL]) +endif + + +######################################################################## +# Determine ARDUINO_LIBS automatically + +ifndef ARDUINO_LIBS + # automatically determine included libraries + ARDUINO_LIBS += $(filter $(notdir $(wildcard $(ARDUINO_DIR)/libraries/*)), \ + $(shell sed -ne 's/^ *\# *include *[<\"]\(.*\)\.h[>\"]/\1/p' $(LOCAL_SRCS))) + ARDUINO_LIBS += $(filter $(notdir $(wildcard $(PROJ_LIBS_PATH)/*)), \ + $(shell sed -ne 's/^ *\# *include *[<\"]\(.*\)\.h[>\"]/\1/p' $(LOCAL_SRCS))) + ARDUINO_LIBS += $(filter $(notdir $(wildcard $(ARDUINO_PLATFORM_LIB_PATH)/*)), \ + $(shell sed -ne 's/^ *\# *include *[<\"]\(.*\)\.h[>\"]/\1/p' $(LOCAL_SRCS))) +endif + +######################################################################## +# Serial monitor (just a screen wrapper) + +# Quite how to construct the monitor command seems intimately tied +# to the command we're using (here screen). So, read the screen docs +# for more information (search for 'character special device'). + +ifeq ($(strip $(NO_CORE)),) + ifndef MONITOR_BAUDRATE + MONITOR_BAUDRATE = 9600 + $(call show_config_variable,MONITOR_BAUDRATE,[ASSUMED]) + else + $(call show_config_variable,MONITOR_BAUDRATE,[USER]) + endif + + ifndef MONITOR_CMD + MONITOR_CMD = screen + endif +endif + +# Include Arduino Header file +ARDUINO_HEADER=Arduino.h + +######################################################################## +# Rules for making stuff + +# The name of the main targets +TARGET_HEX = $(OBJDIR)/$(TARGET).hex +TARGET_ELF = $(OBJDIR)/$(TARGET).elf +TARGET_EEP = $(OBJDIR)/$(TARGET).eep +TARGET_BIN = $(OBJDIR)/$(TARGET).bin +CORE_LIB = $(OBJDIR)/libcore.a + +# Names of executables +# In the rare case of wanting to override a path and/or excecutable +# name, the OVERRIDE_EXECUTABLES variable must be defned and _all_ +# the excecutables (CC, CXX, AS, OBJCOPY, OBJDUMP AR, SIZE and NM) +# _must_ be defined in the calling makefile. +# We can't use "?=" assignment because these are already implicitly +# defined by Make (e.g. $(CC) == cc). +ifndef OVERRIDE_EXECUTABLES + CC = $(TOOLS_PATH)/$(CC_NAME) + CXX = $(TOOLS_PATH)/$(CXX_NAME) + AS = $(TOOLS_PATH)/$(AS_NAME) + OBJCOPY = $(TOOLS_PATH)/$(OBJCOPY_NAME) + OBJDUMP = $(TOOLS_PATH)/$(OBJDUMP_NAME) + AR = $(TOOLS_PATH)/$(AR_NAME) + SIZE = $(TOOLS_PATH)/$(SIZE_NAME) + NM = $(TOOLS_PATH)/$(NM_NAME) +endif + +REMOVE = rm -rf +MV = mv -f +CAT = cat +ECHO = printf +MKDIR = mkdir -p + +# recursive wildcard function, call with params: +# - start directory (finished with /) or empty string for current dir +# - glob pattern +# (taken from http://blog.jgc.org/2011/07/gnu-make-recursive-wildcard-function.html) +rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d)) + +# functions used to determine various properties of library +# called with library path. Needed because of differences between library +# layouts in arduino 1.0.x and 1.5.x. +# Assuming new 1.5.x layout when there is "src" subdirectory in main directory +# and library.properties file + +# Gets include flags for library +get_library_includes = $(if $(and $(wildcard $(1)/src), $(wildcard $(1)/library.properties)), \ + -I$(1)/src, \ + $(addprefix -I,$(1) $(wildcard $(1)/utility))) + +# Gets all sources with given extension (param2) for library (path = param1) +# for old (1.0.x) layout looks in . and "utility" directories +# for new (1.5.x) layout looks in src and recursively its subdirectories +get_library_files = $(if $(and $(wildcard $(1)/src), $(wildcard $(1)/library.properties)), \ + $(call rwildcard,$(1)/src/,*.$(2)), \ + $(wildcard $(1)/*.$(2) $(1)/utility/*.$(2))) + +# General arguments +PROJ_LIBS := $(sort $(wildcard $(patsubst %,$(PROJ_LIBS_PATH)/%,$(ARDUINO_LIBS)))) +PROJ_LIB_NAMES := $(patsubst $(PROJ_LIBS_PATH)/%,%,$(PROJ_LIBS)) + +# Let user libraries override system ones. +SYS_LIBS := $(sort $(wildcard $(patsubst %,$(ARDUINO_LIB_PATH)/%,$(filter-out $(PROJ_LIB_NAMES),$(ARDUINO_LIBS))))) +SYS_LIB_NAMES := $(patsubst $(ARDUINO_LIB_PATH)/%,%,$(SYS_LIBS)) + +ifdef ARDUINO_PLATFORM_LIB_PATH + PLATFORM_LIBS := $(sort $(wildcard $(patsubst %,$(ARDUINO_PLATFORM_LIB_PATH)/%,$(filter-out $(PROJ_LIB_NAMES),$(ARDUINO_LIBS))))) + PLATFORM_LIB_NAMES := $(patsubst $(ARDUINO_PLATFORM_LIB_PATH)/%,%,$(PLATFORM_LIBS)) +endif + +# Error here if any are missing. +LIBS_NOT_FOUND = $(filter-out $(PROJ_LIB_NAMES) $(SYS_LIB_NAMES) $(PLATFORM_LIB_NAMES),$(ARDUINO_LIBS)) +ifneq (,$(strip $(LIBS_NOT_FOUND))) + ifdef ARDUINO_PLATFORM_LIB_PATH + $(error The following libraries specified in ARDUINO_LIBS could not be found (searched PROJ_LIBS_PATH, ARDUINO_LIB_PATH and ARDUINO_PLATFORM_LIB_PATH): $(LIBS_NOT_FOUND)) + else + $(error The following libraries specified in ARDUINO_LIBS could not be found (searched PROJ_LIBS_PATH and ARDUINO_LIB_PATH): $(LIBS_NOT_FOUND)) + endif +endif + +SYS_INCLUDES := $(foreach lib, $(SYS_LIBS), $(call get_library_includes,$(lib))) +PROJ_INCLUDES := $(foreach lib, $(PROJ_LIBS), $(call get_library_includes,$(lib))) +LIB_C_SRCS := $(foreach lib, $(SYS_LIBS), $(call get_library_files,$(lib),c)) +LIB_CPP_SRCS := $(foreach lib, $(SYS_LIBS), $(call get_library_files,$(lib),cpp)) +LIB_AS_SRCS := $(foreach lib, $(SYS_LIBS), $(call get_library_files,$(lib),S)) +PROJ_LIB_CPP_SRCS := $(foreach lib, $(PROJ_LIBS), $(call get_library_files,$(lib),cpp)) +PROJ_LIB_C_SRCS := $(foreach lib, $(PROJ_LIBS), $(call get_library_files,$(lib),c)) +PROJ_LIB_AS_SRCS := $(foreach lib, $(PROJ_LIBS), $(call get_library_files,$(lib),S)) +LIB_OBJS = $(patsubst $(ARDUINO_LIB_PATH)/%.c,$(OBJDIR)/libs/%.c.o,$(LIB_C_SRCS)) \ + $(patsubst $(ARDUINO_LIB_PATH)/%.cpp,$(OBJDIR)/libs/%.cpp.o,$(LIB_CPP_SRCS)) \ + $(patsubst $(ARDUINO_LIB_PATH)/%.S,$(OBJDIR)/libs/%.S.o,$(LIB_AS_SRCS)) +PROJ_LIB_OJS = $(patsubst $(PROJ_LIBS_PATH)/%.cpp,$(OBJDIR)/projlibs/%.cpp.o,$(PROJ_LIB_CPP_SRCS)) \ + $(patsubst $(PROJ_LIBS_PATH)/%.c,$(OBJDIR)/projlibs/%.c.o,$(PROJ_LIB_C_SRCS)) \ + $(patsubst $(PROJ_LIBS_PATH)/%.S,$(OBJDIR)/projlibs/%.S.o,$(PROJ_LIB_AS_SRCS)) + +ifdef ARDUINO_PLATFORM_LIB_PATH + PLATFORM_INCLUDES := $(foreach lib, $(PLATFORM_LIBS), $(call get_library_includes,$(lib))) + PLATFORM_LIB_CPP_SRCS := $(foreach lib, $(PLATFORM_LIBS), $(call get_library_files,$(lib),cpp)) + PLATFORM_LIB_C_SRCS := $(foreach lib, $(PLATFORM_LIBS), $(call get_library_files,$(lib),c)) + PLATFORM_LIB_AS_SRCS := $(foreach lib, $(PLATFORM_LIBS), $(call get_library_files,$(lib),S)) + PLATFORM_LIB_OBJS := $(patsubst $(ARDUINO_PLATFORM_LIB_PATH)/%.cpp,$(OBJDIR)/platformlibs/%.cpp.o,$(PLATFORM_LIB_CPP_SRCS)) \ + $(patsubst $(ARDUINO_PLATFORM_LIB_PATH)/%.c,$(OBJDIR)/platformlibs/%.c.o,$(PLATFORM_LIB_C_SRCS)) \ + $(patsubst $(ARDUINO_PLATFORM_LIB_PATH)/%.S,$(OBJDIR)/platformlibs/%.S.o,$(PLATFORM_LIB_AS_SRCS)) + +endif + +# Dependency files +DEPS = $(LOCAL_OBJS:.o=.d) $(LIB_OBJS:.o=.d) $(PLATFORM_OBJS:.o=.d) $(PROJ_LIB_OJS:.o=.d) $(CORE_OBJS:.o=.d) + +ifndef OPTIMIZATION_LEVEL + OPTIMIZATION_LEVEL=s + $(call show_config_variable,OPTIMIZATION_LEVEL,[DEFAULT]) +else + $(call show_config_variable,OPTIMIZATION_LEVEL,[USER]) +endif + +DEBUG_FLAGS = -O0 -g + +# SoftwareSerial requires -Os (some delays are tuned for this optimization level) +%SoftwareSerial.cpp.o : OPTIMIZATION_FLAGS = -Os +%Uart.cpp.o : OPTIMIZATION_FLAGS = -Os + +ifndef MCU_FLAG_NAME + MCU_FLAG_NAME = mmcu + $(call show_config_variable,MCU_FLAG_NAME,[DEFAULT]) +else + $(call show_config_variable,MCU_FLAG_NAME,[USER]) +endif + +CPPFLAGS += -$(MCU_FLAG_NAME)=$(MCU) -DF_CPU=$(F_CPU) -DARDUINO=$(ARDUINO_VERSION_SHORT) -DARDUINO_$(BOARD) $(ARDUINO_ARCH_FLAG) \ + "-DARDUINO_BOARD=\"$(BOARD)\"" "-DARDUINO_VARIANT=\"$(VARIANT)\"" \ + -I$(ARDUINO_CORE_PATH) -I$(ARDUINO_CORE_PATH)/api -I$(ARDUINO_VAR_PATH)/$(VARIANT) \ + $(SYS_INCLUDES) $(PLATFORM_INCLUDES) $(PROJ_INCLUDES) -Wall -ffunction-sections \ + -fdata-sections + +# PROG_TYPES_COMPAT is enabled by default for compatibility with the Arduino IDE. +# By placing it before the user-provided CPPFLAGS rather than after, we allow the +# the user to disable it if they like, by adding the negation of the flag +# (-U__PROG_TYPES_COMPAT__) to the user-provided CPPFLAGS. +CPPFLAGS := -D__PROG_TYPES_COMPAT__ $(CPPFLAGS) + +ifdef DEBUG +OPTIMIZATION_FLAGS= $(DEBUG_FLAGS) +else +OPTIMIZATION_FLAGS = -O$(OPTIMIZATION_LEVEL) +endif + +CPPFLAGS += $(OPTIMIZATION_FLAGS) + +# USB IDs for the Caterina devices like leonardo or micro +ifneq ($(CATERINA),) + CPPFLAGS += -DUSB_VID=$(USB_VID) -DUSB_PID=$(USB_PID) + ifdef USB_PRODUCT + CPPFLAGS += -DUSB_PRODUCT='$(USB_PRODUCT)' -DUSB_MANUFACTURER='$(USB_MANUFACTURER)' + endif +endif + +# $(TOOL_PREFIX)-gcc version that we can do maths on +CC_VERNUM = $(shell $(CC) -dumpversion | sed 's/\.//g') + +# moved from above so we can find version-dependant ar +ifeq ($(TOOL_PREFIX), avr) + ifeq ($(shell expr $(CC_VERNUM) '>' 490), 1) + AR_NAME := $(TOOL_PREFIX)-gcc-ar + else + AR_NAME := $(TOOL_PREFIX)-ar + endif +endif + +ifndef CFLAGS_STD + ifeq ($(shell expr $(CC_VERNUM) '>' 490), 1) + CFLAGS_STD = -std=gnu11 + else + CFLAGS_STD = + endif + $(call show_config_variable,CFLAGS_STD,[DEFAULT]) +else + $(call show_config_variable,CFLAGS_STD,[USER]) +endif + +ifndef CXXFLAGS_STD + ifeq ($(shell expr $(CC_VERNUM) '>' 490), 1) + CXXFLAGS_STD = -std=gnu++11 + else + CXXFLAGS_STD = + endif + $(call show_config_variable,CXXFLAGS_STD,[DEFAULT]) +else + $(call show_config_variable,CXXFLAGS_STD,[USER]) +endif + +CFLAGS += $(CFLAGS_STD) +CXXFLAGS += -fpermissive -fno-exceptions $(CXXFLAGS_STD) +ASFLAGS += -x assembler-with-cpp +DIAGNOSTICS_COLOR_WHEN ?= always + +# Flags for AVR +ifeq ($(findstring avr, $(strip $(CC_NAME))), avr) + ifeq ($(shell expr $(CC_VERNUM) '>' 490), 1) + ASFLAGS += -flto + CXXFLAGS += -fno-threadsafe-statics -flto -fno-devirtualize -fdiagnostics-color=$(DIAGNOSTICS_COLOR_WHEN) + CFLAGS += -flto -fno-fat-lto-objects -fdiagnostics-color=$(DIAGNOSTICS_COLOR_WHEN) + LDFLAGS += -flto -fuse-linker-plugin + endif +# Flags for ARM (most set in Sam.mk) +else + ifeq ($(shell expr $(CC_VERNUM) '>' 490), 1) + CXXFLAGS += -fdiagnostics-color=$(DIAGNOSTICS_COLOR_WHEN) + CFLAGS += -fdiagnostics-color=$(DIAGNOSTICS_COLOR_WHEN) + endif +endif + +LDFLAGS += -$(MCU_FLAG_NAME)=$(MCU) -Wl,--gc-sections -O$(OPTIMIZATION_LEVEL) +SIZEFLAGS ?= --mcu=$(MCU) -C + +# for backwards compatibility, grab ARDUINO_PORT if the user has it set +# instead of MONITOR_PORT +MONITOR_PORT ?= $(ARDUINO_PORT) + +ifneq ($(strip $(MONITOR_PORT)),) + ifeq ($(CURRENT_OS), WINDOWS) + # Expect MONITOR_PORT to be '1' or 'com1' for COM1 in Windows. Split it up + # into the two styles required: /dev/ttyS* for ard-reset-arduino and com* + # for avrdude. This also could work with /dev/com* device names and be more + # consistent, but the /dev/com* is not recommended by Cygwin and doesn't + # always show up. + COM_PORT_ID = $(subst com,,$(MONITOR_PORT)) + COM_STYLE_MONITOR_PORT = com$(COM_PORT_ID) + DEVICE_PATH = /dev/ttyS$(shell awk 'BEGIN{ print $(COM_PORT_ID) - 1 }') + else + # set DEVICE_PATH based on user-defined MONITOR_PORT or ARDUINO_PORT + DEVICE_PATH = $(MONITOR_PORT) + endif + $(call show_config_variable,DEVICE_PATH,[COMPUTED],(from MONITOR_PORT)) +else + # If no port is specified, try to guess it from wildcards. + # Will only work if the Arduino is the only/first device matched. + DEVICE_PATH = $(firstword $(wildcard \ + /dev/ttyACM? /dev/ttyUSB? /dev/tty.usbserial* /dev/tty.usbmodem* /dev/tty.wchusbserial*)) + $(call show_config_variable,DEVICE_PATH,[AUTODETECTED]) +endif + +ifndef FORCE_MONITOR_PORT + $(call show_config_variable,FORCE_MONITOR_PORT,[DEFAULT]) +else + $(call show_config_variable,FORCE_MONITOR_PORT,[USER]) +endif + +ifdef FORCE_MONITOR_PORT + # Skips the DEVICE_PATH existance check. + get_monitor_port = $(DEVICE_PATH) +else + # Returns the Arduino port (first wildcard expansion) if it exists, otherwise it errors. + ifeq ($(CURRENT_OS), WINDOWS) + get_monitor_port = $(COM_STYLE_MONITOR_PORT) + else + get_monitor_port = $(if $(wildcard $(DEVICE_PATH)),$(firstword $(wildcard $(DEVICE_PATH))),$(error Arduino port $(DEVICE_PATH) not found!)) + endif +endif + +# Returns the ISP port (first wildcard expansion) if it exists, otherwise it errors. +get_isp_port = $(if $(wildcard $(ISP_PORT)),$(firstword $(wildcard $(ISP_PORT))),$(if $(findstring Xusb,X$(ISP_PORT)),$(ISP_PORT),$(error ISP port $(ISP_PORT) not found!))) + +# Command for avr_size: do $(call avr_size,elffile,hexfile) +ifneq (,$(findstring AVR,$(shell $(SIZE) --help))) + # We have a patched version of binutils that mentions AVR - pass the MCU + # and the elf to get nice output. + avr_size = $(SIZE) $(SIZEFLAGS) --format=avr $(1) + $(call show_config_info,Size utility: AVR-aware for enhanced output,[AUTODETECTED]) +else + ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) + avr_size = $(SIZE) $(SIZEFLAGS) $(1) + $(call show_config_info,Size utility: ARM,[AUTODETECTED]) + else + # We have a plain-old binutils version - just give it the hex. + avr_size = $(SIZE) $(2) + $(call show_config_info,Size utility: Basic (not AVR-aware),[AUTODETECTED]) + endif +endif + +ifneq (,$(strip $(ARDUINO_LIBS))) + $(call arduino_output,-) + $(call show_config_info,ARDUINO_LIBS =) +endif + +ifneq (,$(strip $(PROJ_LIB_NAMES))) + $(foreach lib,$(PROJ_LIB_NAMES),$(call show_config_info, $(lib),[USER])) +endif + +ifneq (,$(strip $(SYS_LIB_NAMES))) + $(foreach lib,$(SYS_LIB_NAMES),$(call show_config_info, $(lib),[SYSTEM])) +endif + +ifneq (,$(strip $(PLATFORM_LIB_NAMES))) + $(foreach lib,$(PLATFORM_LIB_NAMES),$(call show_config_info, $(lib),[PLATFORM])) +endif + +# either calculate parent dir from arduino dir, or user-defined path +ifndef BOOTLOADER_PARENT + BOOTLOADER_PARENT = $(ARDUINO_DIR)/hardware/$(ARCHITECTURE)/$(ARDUINO_VERSION)/bootloaders + $(call show_config_variable,BOOTLOADER_PARENT,[COMPUTED],(from ARDUINO_DIR)) +else + $(call show_config_variable,BOOTLOADER_PARENT,[USER]) +endif + +######################################################################## +# Tools version info +ARDMK_VERSION = 1.6 +$(call show_config_variable,ARDMK_VERSION,[COMPUTED]) + +CC_VERSION := $(shell $(CC) -dumpversion) +$(call show_config_variable,CC_VERSION,[COMPUTED],($(CC_NAME))) + +# end of config output +$(call show_separator) + +# Implicit rules for building everything (needed to get everything in +# the right directory) +# +# Rather than mess around with VPATH there are quasi-duplicate rules +# here for building e.g. a system C++ file and a local C++ +# file. Besides making things simpler now, this would also make it +# easy to change the build options in future + +# library sources +$(OBJDIR)/libs/%.c.o: $(ARDUINO_LIB_PATH)/%.c + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/libs/%.cpp.o: $(ARDUINO_LIB_PATH)/%.cpp + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/libs/%.S.o: $(ARDUINO_LIB_PATH)/%.S + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + +$(OBJDIR)/platformlibs/%.c.o: $(ARDUINO_PLATFORM_LIB_PATH)/%.c + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/platformlibs/%.cpp.o: $(ARDUINO_PLATFORM_LIB_PATH)/%.cpp + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/platformlibs/%.S.o: $(ARDUINO_PLATFORM_LIB_PATH)/%.S + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + +$(OBJDIR)/projlibs/%.cpp.o: $(PROJ_LIBS_PATH)/%.cpp + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/projlibs/%.c.o: $(PROJ_LIBS_PATH)/%.c + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/projlibs/%.S.o: $(PROJ_LIBS_PATH)/%.S + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + +ifdef COMMON_DEPS + COMMON_DEPS := $(COMMON_DEPS) $(MAKEFILE_LIST) +else + COMMON_DEPS := $(MAKEFILE_LIST) +endif + +# normal local sources +$(OBJDIR)/%.c.o: %.c $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/%.cc.o: %.cc $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/%.cpp.o: %.cpp $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/%.S.o: %.S $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + +$(OBJDIR)/%.s.o: %.s $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + + +# generated assembly +$(OBJDIR)/%.s: %.pde $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -x c++ -include $(ARDUINO_HEADER) -MMD -S -fverbose-asm $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/%.s: %.ino $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -x c++ -include $(ARDUINO_HEADER) -MMD -S -fverbose-asm $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/%.s: %.cpp $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -x c++ -MMD -S -fverbose-asm $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +# core files +$(OBJDIR)/core/%.c.o: $(ARDUINO_CORE_PATH)/%.c $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/core/%.cpp.o: $(ARDUINO_CORE_PATH)/%.cpp $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/core/%.S.o: $(ARDUINO_CORE_PATH)/%.S $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + +# sam core files +$(OBJDIR)/core/%.c.o: $(SAM_CORE_PATH)/%.c $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/core/%.cpp.o: $(SAM_CORE_PATH)/%.cpp $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CXX) -MMD -c $(CPPFLAGS) $(CXXFLAGS) $< -o $@ + +$(OBJDIR)/core/%.S.o: $(SAM_CORE_PATH)/%.S $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(ASFLAGS) $< -o $@ + +# due specific sources from sam core as doesn't core doesn't have SystemInit startup file +$(OBJDIR)/core/%.c.o: $(SAM_LIBSAM_PATH)/source/%.c $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +$(OBJDIR)/core/%.c.o: $(SAM_SYSTEM_PATH)/source/%.c $(COMMON_DEPS) | $(OBJDIR) + @$(MKDIR) $(dir $@) + $(CC) -MMD -c $(CPPFLAGS) $(CFLAGS) $< -o $@ + +# various object conversions +$(OBJDIR)/%.bin: $(OBJDIR)/%.elf $(COMMON_DEPS) + @$(MKDIR) $(dir $@) + -$(OBJCOPY) -O binary $< $@ + +$(OBJDIR)/%.hex: $(OBJDIR)/%.elf $(COMMON_DEPS) + @$(MKDIR) $(dir $@) + $(OBJCOPY) -O ihex -R .eeprom $< $@ + @$(ECHO) '\n' + $(call avr_size,$<,$@) +ifneq ($(strip $(HEX_MAXIMUM_SIZE)),) + @if [ `$(SIZE) $@ | awk 'FNR == 2 {print $$2}'` -le $(HEX_MAXIMUM_SIZE) ]; then touch $@.sizeok; fi +else + @$(ECHO) "Maximum flash memory of $(BOARD_TAG) is not specified. Make sure the size of $@ is less than $(BOARD_TAG)\'s flash memory" + @touch $@.sizeok +endif + +$(OBJDIR)/%.eep: $(OBJDIR)/%.elf $(COMMON_DEPS) + @$(MKDIR) $(dir $@) + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom='alloc,load' \ + --no-change-warnings --change-section-lma .eeprom=0 -O ihex $< $@ + +$(OBJDIR)/%.lss: $(OBJDIR)/%.elf $(COMMON_DEPS) + @$(MKDIR) $(dir $@) + $(OBJDUMP) -h --source --demangle --wide $< > $@ + +$(OBJDIR)/%.sym: $(OBJDIR)/%.elf $(COMMON_DEPS) + @$(MKDIR) $(dir $@) + $(NM) --size-sort --demangle --reverse-sort --line-numbers $< > $@ + +######################################################################## +# Ctags + +# Assume ctags is on path unless has been specified +ifndef CTAGS_EXEC + CTAGS_EXEC = ctags +endif + +# Default to 'tags' unless user has specified a tags file +ifndef TAGS_FILE + TAGS_FILE = tags +endif + +# ctags command: append, flags unsort (as will be sorted after) and specify filename +CTAGS_CMD = $(CTAGS_EXEC) $(CTAGS_OPTS) -auf + +######################################################################## +# Avrdude + +AVRDUDE = $(ARDUINO_DIR)/tools/avrdude/$(shell /bin/ls --color=never -1 $(ARDUINO_DIR)/tools/avrdude | sort -r | xargs | awk '{print $$1}')/bin/avrdude + +AVRDUDE_OPTS = -q -V + +AVRDUDE_MCU = $(MCU) + +AVRDUDE_COM_OPTS = $(AVRDUDE_OPTS) -p $(AVRDUDE_MCU) +ifdef AVRDUDE_CONF + AVRDUDE_COM_OPTS += -C $(AVRDUDE_CONF) +endif + +# -D - Disable auto erase for flash memory +# Note: -D is needed for Mega boards. +# (See https://github.com/sudar/Arduino-Makefile/issues/114#issuecomment-25011005) +ifeq ($(AVRDUDE_AUTOERASE_FLASH), yes) +else + AVRDUDE_ARD_OPTS = -D +endif +AVRDUDE_ARD_OPTS += -c $(AVRDUDE_ARD_PROGRAMMER) -b $(AVRDUDE_ARD_BAUDRATE) -P +ifeq ($(CURRENT_OS), WINDOWS) + # get_monitor_port checks to see if the monitor port exists, assuming it is + # a file. In Windows, avrdude needs the port in the format 'com1' which is + # not a file, so we have to add the COM-style port directly. + AVRDUDE_ARD_OPTS += $(COM_STYLE_MONITOR_PORT) +else + AVRDUDE_ARD_OPTS += $(call get_monitor_port) +endif + +ifndef ISP_PROG + ifneq ($(strip $(AVRDUDE_ARD_PROGRAMMER)),) + ISP_PROG = $(AVRDUDE_ARD_PROGRAMMER) + else + ISP_PROG = stk500v1 + endif +endif + +ifndef AVRDUDE_ISP_BAUDRATE + ifneq ($(strip $(AVRDUDE_ARD_BAUDRATE)),) + AVRDUDE_ISP_BAUDRATE = $(AVRDUDE_ARD_BAUDRATE) + else + AVRDUDE_ISP_BAUDRATE = 19200 + endif +endif + +# Fuse settings copied from Arduino IDE. +# https://github.com/arduino/Arduino/blob/master/app/src/processing/app/debug/AvrdudeUploader.java#L254 + +# Pre fuse settings +ifndef AVRDUDE_ISP_FUSES_PRE + ifneq ($(strip $(ISP_LOCK_FUSE_PRE)),) + AVRDUDE_ISP_FUSES_PRE += -U lock:w:$(ISP_LOCK_FUSE_PRE):m + endif + + ifneq ($(strip $(ISP_EXT_FUSE)),) + AVRDUDE_ISP_FUSES_PRE += -U efuse:w:$(ISP_EXT_FUSE):m + endif + + ifneq ($(strip $(ISP_HIGH_FUSE)),) + AVRDUDE_ISP_FUSES_PRE += -U hfuse:w:$(ISP_HIGH_FUSE):m + endif + + ifneq ($(strip $(ISP_LOW_FUSE)),) + AVRDUDE_ISP_FUSES_PRE += -U lfuse:w:$(ISP_LOW_FUSE):m + endif +endif + +# Bootloader file settings +ifndef AVRDUDE_ISP_BURN_BOOTLOADER + ifneq ($(strip $(BOOTLOADER_FILE)),) + AVRDUDE_ISP_BURN_BOOTLOADER += -U flash:w:$(BOOTLOADER_PARENT)/$(BOOTLOADER_PATH)/$(BOOTLOADER_FILE):i + endif +endif + +# Post fuse settings +ifndef AVRDUDE_ISP_FUSES_POST + ifneq ($(strip $(ISP_LOCK_FUSE_POST)),) + AVRDUDE_ISP_FUSES_POST += -U lock:w:$(ISP_LOCK_FUSE_POST):m + endif +endif + +# Note: setting -D to disable flash erase before programming may cause issues +# with some boards like attiny84a, making the program not "take", +# so we do not set it by default. +AVRDUDE_ISP_OPTS = -c $(ISP_PROG) -b $(AVRDUDE_ISP_BAUDRATE) + +ifndef ISP_PORT + ifneq ($(strip $(ISP_PROG)),$(filter $(ISP_PROG), atmelice_isp usbasp usbtiny gpio linuxgpio avrispmkii dragon_isp dragon_dw)) + # switch for sam devices as bootloader will be on usb serial if using stk500_v2 + ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) + AVRDUDE_ISP_OPTS += -P $(call get_monitor_port) + else + AVRDUDE_ISP_OPTS += -P $(call get_isp_port) + endif + endif +else + ifeq ($(CURRENT_OS), WINDOWS) + AVRDUDE_ISP_OPTS += -P $(ISP_PORT) + else + AVRDUDE_ISP_OPTS += -P $(call get_isp_port) + endif +endif + +ifndef ISP_EEPROM + ISP_EEPROM = 0 +endif + +AVRDUDE_UPLOAD_HEX = -U flash:w:$(TARGET_HEX):i +AVRDUDE_UPLOAD_EEP = -U eeprom:w:$(TARGET_EEP):i +AVRDUDE_ISPLOAD_OPTS = $(AVRDUDE_UPLOAD_HEX) + +ifneq ($(ISP_EEPROM), 0) + AVRDUDE_ISPLOAD_OPTS += $(AVRDUDE_UPLOAD_EEP) +endif + +######################################################################## +# Explicit targets start here + +all: $(TARGET_EEP) $(TARGET_BIN) $(TARGET_HEX) + +# Rule to create $(OBJDIR) automatically. All rules with recipes that +# create a file within it, but do not already depend on a file within it +# should depend on this rule. They should use a "order-only +# prerequisite" (e.g., put "| $(OBJDIR)" at the end of the prerequisite +# list) to prevent remaking the target when any file in the directory +# changes. +$(OBJDIR): pre-build + $(MKDIR) $(OBJDIR) + +pre-build: + $(call runscript_if_exists,$(PRE_BUILD_HOOK)) + +# copied from arduino with start-group, end-group +$(TARGET_ELF): $(LOCAL_OBJS) $(CORE_LIB) $(OTHER_OBJS) +# sam devices need start and end group, and must be linked using C++ compiler +ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) + $(CXX) $(LINKER_SCRIPTS) -Wl,-Map=$(OBJDIR)/$(TARGET).map -o $@ $(LOCAL_OBJS) $(OTHER_OBJS) $(OTHER_LIBS) $(LDFLAGS) $(CORE_LIB) -Wl,--end-group +# otherwise traditional +else + $(CC) $(LDFLAGS) -o $@ $(LOCAL_OBJS) $(OTHER_OBJS) $(OTHER_LIBS) $(CORE_LIB) -lc -lm $(LINKER_SCRIPTS) +endif + +$(CORE_LIB): $(CORE_OBJS) $(LIB_OBJS) $(PLATFORM_LIB_OBJS) $(PROJ_LIB_OJS) + $(AR) rcs $@ $(CORE_OBJS) $(LIB_OBJS) $(PLATFORM_LIB_OBJS) $(PROJ_LIB_OJS) + +error_on_caterina: + $(ERROR_ON_CATERINA) + +# Use submake so we can guarantee the reset happens +# before the upload, even with make -j +upload: $(TARGET_HEX) verify_size +ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) +# do reset toggle at 1200 BAUD to enter bootloader if using avrdude or bossa +ifeq ($(strip $(UPLOAD_TOOL)), avrdude) + $(MAKE) reset +else ifeq ($(findstring bossac, $(strip $(UPLOAD_TOOL))), bossac) + $(MAKE) reset +endif + $(MAKE) do_sam_upload +else + $(MAKE) reset + $(MAKE) do_upload +endif + +raw_upload: $(TARGET_HEX) verify_size +ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) + $(MAKE) do_sam_upload +else + $(MAKE) error_on_caterina + $(MAKE) do_upload +endif + +do_upload: + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \ + $(AVRDUDE_UPLOAD_HEX) + +do_sam_upload: $(TARGET_BIN) verify_size +ifeq ($(findstring openocd, $(strip $(UPLOAD_TOOL))), openocd) + $(OPENOCD) $(OPENOCD_OPTS) -c "telnet_port disabled; program {{$(TARGET_BIN)}} verify reset $(BOOTLOADER_SIZE); shutdown" +else ifeq ($(findstring bossac, $(strip $(UPLOAD_TOOL))), bossac) + $(BOSSA) $(BOSSA_OPTS) $(TARGET_BIN) +else ifeq ($(findstring gdb, $(strip $(UPLOAD_TOOL))), gdb) + $(GDB) $(GDB_UPLOAD_OPTS) +else ifeq ($(strip $(UPLOAD_TOOL)), avrdude) + $(MAKE) ispload +else + @$(ECHO) "$(BOOTLOADER_UPLOAD_TOOL) not currently supported!\n\n" +endif + +do_eeprom: $(TARGET_EEP) $(TARGET_HEX) + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \ + $(AVRDUDE_UPLOAD_EEP) + +eeprom: $(TARGET_HEX) verify_size + $(MAKE) reset + $(MAKE) do_eeprom + +raw_eeprom: $(TARGET_HEX) verify_size + $(MAKE) error_on_caterina + $(MAKE) do_eeprom + +reset: + $(call arduino_output,Resetting Arduino...) + $(RESET_CMD) + +# stty on MacOS likes -F, but on Debian it likes -f redirecting +# stdin/out appears to work but generates a spurious error on MacOS at +# least. Perhaps it would be better to just do it in perl ? +reset_stty: + for STTYF in 'stty -F' 'stty --file' 'stty -f' 'stty <' ; \ + do $$STTYF /dev/tty >/dev/null 2>&1 && break ; \ + done ; \ + $$STTYF $(call get_monitor_port) hupcl ; \ + (sleep 0.1 2>/dev/null || sleep 1) ; \ + $$STTYF $(call get_monitor_port) -hupcl + +ispload: $(TARGET_EEP) $(TARGET_HEX) verify_size + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -e \ + $(AVRDUDE_ISPLOAD_OPTS) + +burn_bootloader: +ifeq ($(findstring sam, $(strip $(ARCHITECTURE))), sam) + ifeq ($(strip $(BOOTLOADER_UPLOAD_TOOL)), openocd) + $(OPENOCD) $(OPENOCD_OPTS) -c "telnet_port disabled; init; halt; $(BOOTLOADER_UNPROTECT); program {{$(BOOTLOADER_PARENT)/$(BOOTLOADER_FILE)}} verify reset; shutdown" + else + @$(ECHO) "$(BOOTLOADER_UPLOAD_TOOL) not currently supported!\n\n" + endif +else + ifneq ($(strip $(AVRDUDE_ISP_FUSES_PRE)),) + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) -e $(AVRDUDE_ISP_FUSES_PRE) + endif + ifneq ($(strip $(AVRDUDE_ISP_BURN_BOOTLOADER)),) + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) $(AVRDUDE_ISP_BURN_BOOTLOADER) + endif + ifneq ($(strip $(AVRDUDE_ISP_FUSES_POST)),) + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) $(AVRDUDE_ISP_FUSES_POST) + endif +endif + +set_fuses: +ifneq ($(strip $(AVRDUDE_ISP_FUSES_PRE)),) + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) $(AVRDUDE_ISP_FUSES_PRE) +endif +ifneq ($(strip $(AVRDUDE_ISP_FUSES_POST)),) + $(AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ISP_OPTS) $(AVRDUDE_ISP_FUSES_POST) +endif + +clean:: + $(REMOVE) $(OBJDIR) + +size: $(TARGET_HEX) + $(call avr_size,$(TARGET_ELF),$(TARGET_HEX)) + +show_boards: + @$(CAT) $(BOARDS_TXT) | grep -E '^[a-zA-Z0-9_\-]+.name' | sort -uf | sed 's/.name=/:/' | column -s: -t + +show_submenu: + @$(CAT) $(BOARDS_TXT) | grep -E '[a-zA-Z0-9_\-]+.menu.(cpu|chip).[a-zA-Z0-9_\-]+=' | sort -uf | sed 's/.menu.\(cpu\|chip\)./:/' | sed 's/=/:/' | column -s: -t + +monitor: +ifeq ($(notdir $(MONITOR_CMD)), putty) +ifneq ($(strip $(MONITOR_PARAMS)),) + $(MONITOR_CMD) -serial -sercfg $(MONITOR_BAUDRATE),$(MONITOR_PARAMS) $(call get_monitor_port) +else + $(MONITOR_CMD) -serial -sercfg $(MONITOR_BAUDRATE) $(call get_monitor_port) +endif +else ifeq ($(notdir $(MONITOR_CMD)), picocom) + $(MONITOR_CMD) -b $(MONITOR_BAUDRATE) $(MONITOR_PARAMS) $(call get_monitor_port) +else ifeq ($(notdir $(MONITOR_CMD)), cu) + $(MONITOR_CMD) -l $(call get_monitor_port) -s $(MONITOR_BAUDRATE) +else + $(MONITOR_CMD) $(call get_monitor_port) $(MONITOR_BAUDRATE) +endif + +debug_init: + $(OPENOCD) $(OPENOCD_OPTS) + +debug: + $(GDB) $(GDB_OPTS) + +disasm: $(OBJDIR)/$(TARGET).lss + @$(ECHO) "The compiled ELF file has been disassembled to $(OBJDIR)/$(TARGET).lss\n\n" + +symbol_sizes: $(OBJDIR)/$(TARGET).sym + @$(ECHO) "A symbol listing sorted by their size have been dumped to $(OBJDIR)/$(TARGET).sym\n\n" + +verify_size: +ifeq ($(strip $(HEX_MAXIMUM_SIZE)),) + @$(ECHO) "\nMaximum flash memory of $(BOARD_TAG) is not specified. Make sure the size of $(TARGET_HEX) is less than $(BOARD_TAG)\'s flash memory\n\n" +endif + @if [ ! -f $(TARGET_HEX).sizeok ]; then echo >&2 "\nThe size of the compiled binary file is greater than the $(BOARD_TAG)'s flash memory. \ +See http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it."; false; fi + +generate_assembly: $(OBJDIR)/$(TARGET).s + @$(ECHO) "Compiler-generated assembly for the main input source has been dumped to $(OBJDIR)/$(TARGET).s\n\n" + +generated_assembly: generate_assembly + @$(ECHO) "\"generated_assembly\" target is deprecated. Use \"generate_assembly\" target instead\n\n" + +tags: +ifneq ($(words $(wildcard $(TAGS_FILE))), 0) + rm -f $(TAGS_FILE) +endif + @$(ECHO) "Generating tags for local sources (INO an PDE files as C++): " + $(CTAGS_CMD) $(TAGS_FILE) --langmap=c++:+.ino.pde $(LOCAL_SRCS) +ifneq ($(words $(ARDUINO_LIBS)), 0) + @$(ECHO) "Generating tags for project libraries: " + $(CTAGS_CMD) $(TAGS_FILE) $(foreach lib, $(ARDUINO_LIBS),$(PROJ_LIBS_PATH)/$(lib)/*) +endif + @$(ECHO) "Generating tags for Arduino core: " + $(CTAGS_CMD) $(TAGS_FILE) $(ARDUINO_CORE_PATH)/* + @$(ECHO) "Sorting..\n" + @sort $(TAGS_FILE) -o $(TAGS_FILE) + @$(ECHO) "Tag file generation complete, output: $(TAGS_FILE)\n" + +help_vars: + @$(CAT) $(ARDMK_DIR)/arduino-mk-vars.md + +help: + @$(ECHO) "\nAvailable targets:\n\ + make - compile the code\n\ + make upload - upload\n\ + make ispload - upload using an ISP\n\ + make raw_upload - upload without first resetting\n\ + make eeprom - upload the eep file\n\ + make raw_eeprom - upload the eep file without first resetting\n\ + make clean - remove all our dependencies\n\ + make depends - update dependencies\n\ + make reset - reset the Arduino by tickling DTR or changing baud\n\ + rate on the serial port.\n\ + make show_boards - list all the boards defined in boards.txt\n\ + make show_submenu - list all board submenus defined in boards.txt\n\ + make monitor - connect to the Arduino's serial port\n\ + make debug_init - start openocd gdb server\n\ + make debug - connect to gdb target and begin debugging\n\ + make size - show the size of the compiled output (relative to\n\ + resources, if you have a patched $(TOOL_PREFIX)-size).\n\ + make verify_size - verify that the size of the final file is less than\n\ + the capacity of the micro controller.\n\ + make symbol_sizes - generate a .sym file containing symbols and their\n\ + sizes.\n\ + make disasm - generate a .lss file that contains disassembly\n\ + of the compiled file interspersed with your\n\ + original source code.\n\ + make generate_assembly - generate a .s file containing the compiler\n\ + generated assembly of the main sketch.\n\ + make burn_bootloader - burn bootloader and fuses\n\ + make set_fuses - set fuses without burning bootloader\n\ + make tags - generate tags file including project libs and Arduino core\n\ + make help_vars - print all variables that can be overridden\n\ + make help - show this help\n\ +" + @$(ECHO) "Please refer to $(ARDMK_DIR)/Arduino.mk for more details.\n" + +.PHONY: all upload raw_upload raw_eeprom error_on_caterina reset reset_stty ispload \ + clean depends size show_boards monitor disasm symbol_sizes generated_assembly \ + generate_assembly verify_size burn_bootloader help pre-build tags debug debug_init + +# added - in the beginning, so that we don't get an error if the file is not present +-include $(DEPS) diff --git a/make-scripts/Common.mk b/make-scripts/Common.mk new file mode 100644 index 0000000..fd775e7 --- /dev/null +++ b/make-scripts/Common.mk @@ -0,0 +1,138 @@ +COMMON_INCLUDED = TRUE +# Useful functions +# Returns the first argument (typically a directory), if the file or directory +# named by concatenating the first and optionally second argument +# (directory and optional filename) exists +dir_if_exists = $(if $(wildcard $(1)$(2)),$(1)) + +# result = $(call READ_BOARD_TXT, 'boardname', 'parameter') +PARSE_BOARD = $(shell if [ -f $(BOARDS_TXT) ]; \ +then \ + $(GREP_CMD) -Ev '^\#' $(BOARDS_TXT) | \ + $(GREP_CMD) -E "^[ \t]*$(1).$(2)=" | \ + cut -d = -f 2- | \ + cut -d : -f 2; \ +fi) + +# Run a shell script if it exists. Stops make on error. +runscript_if_exists = \ + $(if $(wildcard $(1)), \ + $(if $(findstring 0, \ + $(lastword $(shell $(abspath $(wildcard $(1))); echo $$?))), \ + $(info Info: $(1) success), \ + $(error ERROR: $(1) failed))) + +# For message printing: pad the right side of the first argument with spaces to +# the number of bytes indicated by the second argument. +space_pad_to = $(shell echo "$(1) " | head -c$(2)) + +# Call with some text, and a prefix tag if desired (like [AUTODETECTED]), +show_config_info = $(call arduino_output,- $(call space_pad_to,$(2),20) $(1)) + +# Call with the name of the variable, a prefix tag if desired (like [AUTODETECTED]), +# and an explanation if desired (like (found in $$PATH) +show_config_variable = $(call show_config_info,$(1) = $($(1)) $(3),$(2)) + +# Just a nice simple visual separator +show_separator = $(call arduino_output,-------------------------) + +# Master Arduino Makefile include (after user Makefile) +ardmk_include = $(shell basename $(word 2,$(MAKEFILE_LIST))) + +$(call show_separator) +$(call arduino_output,$(call ardmk_include) Configuration:) + +######################################################################## +# +# Detect OS + +ifeq ($(OS),Windows_NT) + CURRENT_OS = WINDOWS + GREP_CMD = grep +else + UNAME_S := $(shell uname -s) + ifeq ($(UNAME_S),Linux) + CURRENT_OS = LINUX + GREP_CMD = grep + endif + ifeq ($(UNAME_S),Darwin) + CURRENT_OS = MAC + ifeq (, $(shell which gggrep)) + $(info Using macOS BSD grep, please install GNU grep to avoid warnings) + GREP_CMD = grep + else + GREP_CMD = ggrep + endif + endif +endif +$(call show_config_variable,CURRENT_OS,[AUTODETECTED]) + +######################################################################## +# +# Travis-CI +ifneq ($(TEST),) + DEPENDENCIES_DIR = /var/tmp/Arduino-Makefile-testing-dependencies + + DEPENDENCIES_MPIDE_DIR := $(shell find $(DEPENDENCIES_DIR) -name 'mpide-0023-*' -type d -exec ls -dt {} + | head -n 1) + + ifeq ($(MPIDE_DIR),) + MPIDE_DIR = $(DEPENDENCIES_MPIDE_DIR) + endif + + ifndef ARDUINO_IDE_DIR + ifeq ($(CURRENT_OS),MAC) + ARDUINO_IDE_DIR = Arduino.app/Contents/Resources/Java + else + ARDUINO_IDE_DIR := $(shell basename $(basename $(basename $(lastword $(wildcard $(DEPENDENCIES_DIR)/arduino*))))) + endif + endif + DEPENDENCIES_ARDUINO_DIR = $(DEPENDENCIES_DIR)/$(ARDUINO_IDE_DIR) + ifeq ($(ARDUINO_DIR),) + ARDUINO_DIR = $(DEPENDENCIES_ARDUINO_DIR) + endif +endif + +######################################################################## +# Arduino Directory + +ifndef ARDUINO_DIR + AUTO_ARDUINO_DIR := $(firstword \ + $(call dir_if_exists,/usr/share/arduino) \ + $(call dir_if_exists,/Applications/Arduino.app/Contents/Resources/Java) \ + $(call dir_if_exists,/Applications/Arduino.app/Contents/Java) ) + ifdef AUTO_ARDUINO_DIR + ARDUINO_DIR = $(AUTO_ARDUINO_DIR) + $(call show_config_variable,ARDUINO_DIR,[AUTODETECTED]) + else + echo $(error "ARDUINO_DIR is not defined") + endif +else + $(call show_config_variable,ARDUINO_DIR,[USER]) +endif + +ifeq ($(CURRENT_OS),WINDOWS) + ifneq ($(shell echo $(ARDUINO_DIR) | egrep '\\|[[:space:]]|cygdrive'),) + echo $(error On Windows, ARDUINO_DIR and other defines must use forward slash and not contain spaces, special characters or be cygdrive relative) + endif +endif + +######################################################################## +# System Python + +ifndef PYTHON_CMD + # try for Python 3 first + PYTHON_CMD := $(shell which python3 2> /dev/null) + ifdef PYTHON_CMD + $(call show_config_variable,PYTHON_CMD,[AUTODETECTED]) + else + # fall-back to any Python + PYTHON_CMD := $(shell which python 2> /dev/null) + ifdef PYTHON_CMD + $(call show_config_variable,PYTHON_CMD,[AUTODETECTED]) + else + echo $(error "Unable to find system Python! Utility scipts won't work. Override this error by defining PYTHON_CMD") + endif + endif +else + $(call show_config_variable,PYTHON_CMD,[USER]) +endif diff --git a/make-scripts/license.txt b/make-scripts/license.txt new file mode 100644 index 0000000..4362b49 --- /dev/null +++ b/make-scripts/license.txt @@ -0,0 +1,502 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + <one line to give the library's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + <signature of Ty Coon>, 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/tools/reset_leonardo.py b/tools/reset_leonardo.py new file mode 100644 index 0000000..be53aa1 --- /dev/null +++ b/tools/reset_leonardo.py @@ -0,0 +1,109 @@ +"""Tool used to reset a Arduino Leonardo board.""" +from os import O_NDELAY, O_NOCTTY, O_RDWR, open as os_open, close as os_close +import sys +from termios import ( + B1200, + TCSANOW, + TIOCM_DTR, + TIOCM_RTS, + TIOCMBIC, + TIOCMBIS, + tcgetattr, + tcsetattr +) +from fcntl import ioctl +from argparse import ArgumentParser +from dataclasses import dataclass +from pathlib import Path +from struct import pack +from time import sleep + + +@dataclass +class ParsedArguments: + """Parsed command-line arguments.""" + serial_port: Path + + +class TTYAttributes: + """TTY attributes.""" + + def __init__(self, tty_fd: int): + """Initializes the TTY attributes.""" + self.__tty_fd = tty_fd + self.__attrs = tcgetattr(tty_fd) + + @property + def ispeed(self): + """The ispeed.""" + return self.__attrs[4] + + @ispeed.setter + def ispeed(self, ispeed: int): + self.__attrs[4] = ispeed + + @property + def ospeed(self): + """The ospeed.""" + return self.__attrs[5] + + @ospeed.setter + def ospeed(self, ospeed: int): + self.__attrs[5] = ospeed + + def set(self): + """Sets the TTY attributes.""" + tcsetattr(self.__tty_fd, TCSANOW, self.__attrs) + + +RESET_BAUD_RATE = B1200 + +DESCRIPTION = "Tool used to reset a Arduino Leonardo board." + + +def main(): + """Main.""" + parser = ArgumentParser(allow_abbrev=False, description=DESCRIPTION) + + parser.add_argument( + "serial_port", + type=Path, + help="The serial port for a Arduino Leonardo board" + ) + + arguments = parser.parse_args(namespace=ParsedArguments) + + is_serial_port_char_device = arguments.serial_port.is_char_device() + + # Verify that the serial port exists + if not arguments.serial_port.is_file() and not is_serial_port_char_device: + print("Error: The serial port file doesn't exist") + sys.exit(1) + + # Verify that the serial port is a character device + if not is_serial_port_char_device: + print("Error: The serial port file is not a character device") + sys.exit(1) + + serial_port_fd = os_open( + str(arguments.serial_port), + O_RDWR | O_NOCTTY | O_NDELAY + ) + + tty_attributes = TTYAttributes(serial_port_fd) + + tty_attributes.ispeed = RESET_BAUD_RATE + tty_attributes.ospeed = RESET_BAUD_RATE + + tty_attributes.set() + + ioctl(serial_port_fd, TIOCMBIS, pack("I", TIOCM_RTS)) + ioctl(serial_port_fd, TIOCMBIC, pack("I", TIOCM_DTR)) + + os_close(serial_port_fd) + + sleep(1.98) + + +if __name__ == "__main__": + main() |