| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2012-04-25 | changed PID values for Leonardo bootloader and sketch | Zach Eveland | |
| done to avoid driver problems for users who installed the pre-release bootloader and driver | |||
| 2012-04-19 | bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried) | Zach Eveland | |
| was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed. | |||
| 2012-04-19 | bugfix for boards with a timer 4 but no channel D | Zach Eveland | |
| compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega | |||
| 2012-04-11 | fixed logic bug in Caterina that could stop the bootloader from entering ↵ | Zach Eveland | |
| self-programming mode | |||
| 2012-04-09 | Micro I hardly knew ye | Zach Eveland | |
| 2012-04-09 | sketch USB VID and PID values are passed in from boards.txt at compile time ↵ | Zach Eveland | |
| now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt | |||
| 2012-04-06 | Revert "Revert "added a short delay and comment to boolean operator in CDC"" | Zach Eveland | |
| This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5. | |||
| 2012-04-06 | Revert "added a short delay and comment to boolean operator in CDC" | Federico Vanzati | |
| This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd. | |||
| 2012-04-03 | added a short delay and comment to boolean operator in CDC | Zach Eveland | |
| Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems. | |||
| 2012-04-01 | added Boolean operators to HardwareSerial and CDC to test whether the port ↵ | Zach Eveland | |
| is ready to send data. Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true. | |||
| 2012-03-28 | fixed logic error in Keyboard.release() - now removes every occurrence of a ↵ | Zach Eveland | |
| key if it's present more than once | |||
| 2012-03-28 | removed horrible multi-key Keyboard.press() and Keyboard.release() methods | Zach Eveland | |
| Saves 924 bytes of Flash | |||
| 2012-03-28 | eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() ↵ | Zach Eveland | |
| (David Mellis). Also edit KeyboardReprogram example which was the only example using type() | |||
| 2012-03-26 | added methods to Keyboard to handle multiple simultaneous key presses or ↵ | Zach Eveland | |
| releases (up to six each) | |||
| 2012-03-26 | Keyboard.type() now just presses and releases the key indicated - doesn't ↵ | Zach Eveland | |
| releaseAll() | |||
| 2012-03-26 | added stub methods for begin() and end() to Mouse and Keyboard | Zach Eveland | |
| 2012-03-14 | reduced delay before starting the Leonardo bootloader | Zach Eveland | |
| Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening. | |||
| 2012-03-07 | Fix for some strange behaviours during board reset | Cristian Maglie | |
| 2012-03-03 | Added Keyboard support for all modifier and all common non-printing keys. | Zach Eveland | |
| 2012-03-03 | Removed support for key mapping in Keyboard. | Zach Eveland | |
| Was no longer being used and would be damn near impossible to support with the new scheme for handling modifiers and non-printing keyboard characters. | |||
| 2012-03-03 | added Keyboard methods press(), release(), and releaseAll() | Zach Eveland | |
| Changes mean that a single, persistent key report must be used so keys can be added or removed. Also reimplemented type() using the new methods. | |||
| 2012-03-03 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| Conflicts: .gitignore | |||
| 2012-03-03 | fixed minor compilation warnings for Leonardo | Zach Eveland | |
| 2012-03-02 | Small changes for the ATmega1284. | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=736 | |||
| 2012-03-01 | changed auto-reset logic for Leonardo. only do WDT manipulation if the port ↵ | Zach Eveland | |
| is opened at 1200 bps. (Dave Mellis) | |||
| 2012-02-27 | Autoreset 1200 bps fix. | Cristian Maglie | |
| 2012-02-22 | shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. ↵ | Zach Eveland | |
| Reset into bootloader is much snappier. | |||
| 2012-02-22 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| 2012-02-14 | Leonardo now checks whether bootloader should be run after a WDT event. | Zach Eveland | |
| Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch. Test in a sketch by adding to setup(): wdt_enable(WDTO_2S); Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader). Had to cut out unused descriptor code to make the bootloader still fit in 4k. | |||
| 2012-02-13 | Leonardo auto-reset-and-upload changes for Windows (explanation below) | Zach Eveland | |
| On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated. Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared. | |||
| 2012-02-13 | changed Leonardo bootloader and sketch PID values again (now 0x0701 for ↵ | Zach Eveland | |
| bootloader, 0x0801 for sketch) | |||
| 2012-02-12 | prog_char -> char PROGMEM in Print.cpp | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=795 | |||
| 2012-02-08 | adjusting descriptors - trying to prevent sketch and bootloader from ↵ | Zach Eveland | |
| grabbing different COM numbers on Windows | |||
| 2012-02-03 | fixed starting Leonardo bootloader from sketch | Zach Eveland | |
| AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms | |||
| 2012-02-03 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| 2012-02-03 | Making head and tail unsigned to avoid division in serial ISR. | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=776 | |||
| 2012-01-24 | Caterina now cleanly hands off operation to the sketch | Zach Eveland | |
| had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation | |||
| 2012-01-10 | Merge branch 'master' of github.com:arduino/Arduino into new-extension | Zach Eveland | |
| 2012-01-02 | Adding INPUT_PULLUP option pinMode(). (Paul Stoffregen). | David A. Mellis | |
| This also changes pinMode(pin, INPUT); to explicitly disable the pull-up resistor, even if it was previously set. http://code.google.com/p/arduino/issues/detail?id=246 | |||
| 2012-01-02 | Fixing findUntil() problem with repeated initial characters. (Jeffery.zksun) | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=768 | |||
| 2012-01-02 | Fixing warnings (unsigned comparisons to 0). (maniacbug) | David A. Mellis | |
| 2012-01-02 | Fixing static is not at beginning of declaration warnings (maniacbug). | David A. Mellis | |
| 2011-12-31 | Merge branch 'master' of github.com:arduino/Arduino into new-extension | Zach Eveland | |
| 2011-12-30 | Simplifying microseconds <-> clock cycles conversions. (Rob Tillaart) | David A. Mellis | |
| This should fix problems with overflows in pulseIn(). It may make millis() slightly less precise for clock speeds that aren't multiple of 1 million, but we don't really support those anyway. http://code.google.com/p/arduino/issues/detail?id=675 | |||
| 2011-12-20 | changed Keyboard write() method to type(). Made write() an alias for type() ↵ | Zach Eveland | |
| to allow subclassing by Stream. | |||
| 2011-12-20 | Revert "changed Keyboard write() method to type(). Made write() an alias ↵ | Zach Eveland | |
| for type() to allow subclassing by Stream." This reverts commit de1d5fc0cb82874c0dcb766c5fb27ab36c5cb32c. | |||
| 2011-12-20 | changed Keyboard write() method to type(). Made write() an alias for type() ↵ | Zach Eveland | |
| to allow subclassing by Stream. | |||
| 2011-12-19 | fixed attachInterrupt() on Leonardo | Zach Eveland | |
| had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs. | |||
| 2011-12-18 | added asynchronous buffering of received CDC characters | Zach Eveland | |
| This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp. Adds public accept() method to CDC. | |||
| 2011-12-18 | fixed digitalWrite on timer 4 pins (D6 and D13) | Zach Eveland | |
 |
index : arduino-avr-xinput | |
| A fork of Dmadison's Xinput Arduino avr core with a package.json |
| aboutsummaryrefslogtreecommitdiff |