arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2012-05-01	renamed Leonardo USB_ class to USBDevice_ to be unambiguous. renamed "USB" ↵	Zach Eveland
	object to "USBDevice" to prevent conflict with USB Host library (thanks Massimo)
2012-04-25	changed PID values for Leonardo bootloader and sketch	Zach Eveland
	done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-19	bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried)	Zach Eveland
	was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed.
2012-04-19	bugfix for boards with a timer 4 but no channel D	Zach Eveland
	compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega
2012-04-11	fixed logic bug in Caterina that could stop the bootloader from entering ↵	Zach Eveland
	self-programming mode
2012-04-09	Micro I hardly knew ye	Zach Eveland

2012-04-09	sketch USB VID and PID values are passed in from boards.txt at compile time ↵	Zach Eveland
	now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt
2012-04-06	Revert "Revert "added a short delay and comment to boolean operator in CDC""	Zach Eveland
	This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5.
2012-04-06	Revert "added a short delay and comment to boolean operator in CDC"	Federico Vanzati
	This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd.
2012-04-03	added a short delay and comment to boolean operator in CDC	Zach Eveland
	Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems.
2012-04-01	added Boolean operators to HardwareSerial and CDC to test whether the port ↵	Zach Eveland
	is ready to send data. Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true.
2012-03-28	fixed logic error in Keyboard.release() - now removes every occurrence of a ↵	Zach Eveland
	key if it's present more than once
2012-03-28	removed horrible multi-key Keyboard.press() and Keyboard.release() methods	Zach Eveland
	Saves 924 bytes of Flash
2012-03-28	eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() ↵	Zach Eveland
	(David Mellis). Also edit KeyboardReprogram example which was the only example using type()
2012-03-26	added methods to Keyboard to handle multiple simultaneous key presses or ↵	Zach Eveland
	releases (up to six each)
2012-03-26	Keyboard.type() now just presses and releases the key indicated - doesn't ↵	Zach Eveland
	releaseAll()
2012-03-26	added stub methods for begin() and end() to Mouse and Keyboard	Zach Eveland

2012-03-14	reduced delay before starting the Leonardo bootloader	Zach Eveland
	Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening.
2012-03-07	Fix for some strange behaviours during board reset	Cristian Maglie

2012-03-03	Added Keyboard support for all modifier and all common non-printing keys.	Zach Eveland

2012-03-03	Removed support for key mapping in Keyboard.	Zach Eveland
	Was no longer being used and would be damn near impossible to support with the new scheme for handling modifiers and non-printing keyboard characters.
2012-03-03	added Keyboard methods press(), release(), and releaseAll()	Zach Eveland
	Changes mean that a single, persistent key report must be used so keys can be added or removed. Also reimplemented type() using the new methods.
2012-03-03	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland
	Conflicts: .gitignore
2012-03-03	fixed minor compilation warnings for Leonardo	Zach Eveland

2012-03-02	Small changes for the ATmega1284.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=736
2012-03-01	changed auto-reset logic for Leonardo. only do WDT manipulation if the port ↵	Zach Eveland
	is opened at 1200 bps. (Dave Mellis)
2012-02-27	Autoreset 1200 bps fix.	Cristian Maglie

2012-02-22	shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. ↵	Zach Eveland
	Reset into bootloader is much snappier.
2012-02-22	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland

2012-02-14	Leonardo now checks whether bootloader should be run after a WDT event.	Zach Eveland
	Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch. Test in a sketch by adding to setup(): wdt_enable(WDTO_2S); Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader). Had to cut out unused descriptor code to make the bootloader still fit in 4k.
2012-02-13	Leonardo auto-reset-and-upload changes for Windows (explanation below)	Zach Eveland
	On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated. Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13	changed Leonardo bootloader and sketch PID values again (now 0x0701 for ↵	Zach Eveland
	bootloader, 0x0801 for sketch)
2012-02-12	prog_char -> char PROGMEM in Print.cpp	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=795
2012-02-08	adjusting descriptors - trying to prevent sketch and bootloader from ↵	Zach Eveland
	grabbing different COM numbers on Windows
2012-02-03	fixed starting Leonardo bootloader from sketch	Zach Eveland
	AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland

2012-02-03	Making head and tail unsigned to avoid division in serial ISR.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=776
2012-01-24	Caterina now cleanly hands off operation to the sketch	Zach Eveland
	had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2012-01-10	Merge branch 'master' of github.com:arduino/Arduino into new-extension	Zach Eveland

2012-01-02	Adding INPUT_PULLUP option pinMode(). (Paul Stoffregen).	David A. Mellis
	This also changes pinMode(pin, INPUT); to explicitly disable the pull-up resistor, even if it was previously set. http://code.google.com/p/arduino/issues/detail?id=246
2012-01-02	Fixing findUntil() problem with repeated initial characters. (Jeffery.zksun)	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=768
2012-01-02	Fixing warnings (unsigned comparisons to 0). (maniacbug)	David A. Mellis

2012-01-02	Fixing static is not at beginning of declaration warnings (maniacbug).	David A. Mellis

2011-12-31	Merge branch 'master' of github.com:arduino/Arduino into new-extension	Zach Eveland

2011-12-30	Simplifying microseconds <-> clock cycles conversions. (Rob Tillaart)	David A. Mellis
	This should fix problems with overflows in pulseIn(). It may make millis() slightly less precise for clock speeds that aren't multiple of 1 million, but we don't really support those anyway. http://code.google.com/p/arduino/issues/detail?id=675
2011-12-20	changed Keyboard write() method to type(). Made write() an alias for type() ↵	Zach Eveland
	to allow subclassing by Stream.
2011-12-20	Revert "changed Keyboard write() method to type(). Made write() an alias ↵	Zach Eveland
	for type() to allow subclassing by Stream." This reverts commit de1d5fc0cb82874c0dcb766c5fb27ab36c5cb32c.
2011-12-20	changed Keyboard write() method to type(). Made write() an alias for type() ↵	Zach Eveland
	to allow subclassing by Stream.
2011-12-19	fixed attachInterrupt() on Leonardo	Zach Eveland
	had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs.
2011-12-18	added asynchronous buffering of received CDC characters	Zach Eveland
	This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp. Adds public accept() method to CDC.