arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2012-02-03	fixed starting Leonardo bootloader from sketch	Zach Eveland
	AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-01-24	Caterina now cleanly hands off operation to the sketch	Zach Eveland
	had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2011-12-18	added asynchronous buffering of received CDC characters	Zach Eveland
	This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp. Adds public accept() method to CDC.
2011-11-09	restored original non-interrupt-driven DiskLoader	Zach Eveland
	Interrupt-driven version was a dead-end - too many bugs with that approach.
2011-10-27	changes in core and boards.txt to support new bootloader	Zach Eveland
	old bootloader could fit in only 2 kB of flash. new version has to have a 4 kB block - jump-to address and boards.txt must reflect this.
2011-09-08	fixed bug where sketches over 28k caused subsequent auto-reset-and-upload ↵	Zach Eveland
	attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable.
2011-09-06	changed auto-reset trigger condition to fix auto-reset-and-upload for ↵	Zach Eveland
	Windows. now reboots when a port, opened at 1200 bps, is closed.
2011-09-05	changed baudrate for auto-reset-and-upload back to 1200 bps. specified ↵	Zach Eveland
	arduino protocol for Leonardo avrdude upload.
2011-08-30	on a CDC or HID write() error, call setWriteError(). better handling of ↵	Zach Eveland
	USB_Send errors in CDC.
2011-08-30	support for non-Leonardo boards is back!	Zach Eveland

2011-08-30	CDC and HID write() routines now return non-void - brought in line with new ↵	Zach Eveland
	write behavior
2011-08-27	auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to ↵	Zach Eveland
	support 300 bps connection, changed core and boards.txt to match
2011-08-24	bugfix - Serial.write() would try to send even if no CDC connection was open.	Zach Eveland

2011-08-24	changed auto-reset method for upload: now triggered by opening port at 1200 bps	Zach Eveland

2011-08-16	Temporary fix for auto-reset from IDE. Will reset chip when DTR is ↵	Zach Eveland
	asserted, no matter what CDC baud rate is selected.
2011-08-14	Serial via USB works	Zach Eveland
	Integrated rest of Peter's USB implementation