aboutsummaryrefslogtreecommitdiff
path: root/bootloaders
AgeCommit message (Expand)Author
2013-05-14Etheris bootloaderFederico Fissore
2013-04-17Moved old production firmware to the right placeCristian Maglie
2013-04-03Merged 1.0.5Cristian Maglie
2013-03-07Fixed permissionsCristian Maglie
2013-03-07Mega2560 bootloader: use avr library functions for writing into EEPROMCristian Maglie
2013-03-07Mega2560 bootloader: fix wrong eeprom addressingCristian Maglie
2012-12-22Fixed compile problems with avr gcc 4.6.2 (crosspack CrossPack-AVR-20121207.dmg)Cristian Maglie
2012-12-22Saved old production firmware for Mega2560Cristian Maglie
2012-12-22Added patch to bootloader for Mega2560. (Mark Sproul)Cristian Maglie
2012-12-10Merged 1.0.3Cristian Maglie
2012-12-10fixed permissions on a lot of text files. see #1116Federico Fissore
2012-12-10Fixed some firmware filenamesCristian Maglie
2012-12-07Added Esplora precompiled firmwareCristian Maglie
2012-12-07Added support for Arduino EsploraCristian Maglie
2012-11-30Updated firmware for atmega8 for new avr-gcc versions.Cristian Maglie
2012-11-30Saved old Leonardo and Micro production firmware.Cristian Maglie
2012-11-30Improved Leonardo bootloaderKristian Lauszus
2012-11-23Caterina changes to support Micro. includes newly rebuilt version of the boo...Zachary Eveland
2012-11-02Updating Micro bootloader firmware.David A. Mellis
2012-11-01Adding LilyPad Arduino USB.David A. Mellis
2012-10-27Adding Micro.David A. Mellis
2012-04-25changed PID values for Leonardo bootloader and sketchZach Eveland
2012-04-11merged Caterina with BlinkZach Eveland
2012-04-11fixed logic bug in Caterina that could stop the bootloader from entering self...Zach Eveland
2012-04-09Micro I hardly knew yeZach Eveland
2012-04-09Micro and Leonardo bootloaders for distribution are now merged with Blink sketchZach Eveland
2012-04-09PID and VID are no longer hard-coded in bootloader. instead they are passed ...Zach Eveland
2012-03-14bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.Zach Eveland
2012-03-14changed Caterina timeout after self-programming to 500 ms (from 250 ms)Zach Eveland
2012-03-08give Leonardo bootloader 250 ms to finish housekeeping before leaving self-pr...Zach Eveland
2012-03-08removed old version of Leonardo's caterina bootloader, replaced with LUFA-bas...Zach Eveland
2012-03-01reduced Caterina timeout to 8 seconds from 16Zach Eveland
2012-02-14Leonardo now checks whether bootloader should be run after a WDT event.Zach Eveland
2012-02-14Leonardo bootloader jumps straight to sketch for a power-on reset.Zach Eveland
2012-02-13changed Leonardo bootloader and sketch PID values again (now 0x0701 for bootl...Zach Eveland
2012-02-08adjusting descriptors - trying to prevent sketch and bootloader from grabbing...Zach Eveland
2012-02-07changed Caterina descriptors - Arduino LLC VID, new PID, manufacturer string,...Zach Eveland
2012-02-07fixed bug in Caterina which caused some programming instructions to failZach Eveland
2012-02-06increased Leonardo bootloader timeout to 16 secondsZach Eveland
2012-02-03proper bootloader timeout and LED control in Leonardo bootloaderZach Eveland
2012-01-24Caterina now cleanly hands off operation to the sketchZach Eveland
2012-01-21move interrupt vector table to application section before jumping to it after...Zach Eveland
2012-01-21Leonardo bootloader checks reason for reset and jumps immediately to sketch i...Zach Eveland
2012-01-19stripped all LUFA LED control. from LUFA-based CaterinaZach Eveland
2012-01-19changed fuses to select 4k bootloader for LUFA-based CaterinaZach Eveland
2012-01-19added Board/LEDs.h to LUFA-based CaterinaZach Eveland
2012-01-19superficial changes to stock LUFA CDC bootloader - renamed project, removed u...Zach Eveland
2012-01-19initial checkin of LUFA 111009 CDC bootloaderZach Eveland
2012-01-10made Leonardo and Micro bootloader PIDs same as sketch PIDsZach Eveland
2012-01-10restored composite and non-composite device descriptors (removed in 4b05c3fc7...Zach Eveland
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-23 10:26:33 +0000