arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2011-09-16	Updating Micro bootloader (previous one was identical to Leonardo).	David A. Mellis

2011-09-16	new bootloader binaries for Micro and Leonardo - uses new assignment for ↵	Zach Eveland
	TXLED pin
2011-09-16	updated pin mappings for bootloader and pins_arduino.h in anticipation of ↵	Zach Eveland
	final hardware.
2011-09-16	restored Micro entry in boards.txt, made separate bootloader images for ↵	Zach Eveland
	Leonardo and Micro.
2011-09-16	bootloader iProduct definition changed to "Arduino Leonardo Bootloader" or ↵	Zach Eveland
	"Arduino Micro Bootloader". selection depends on PID passed in at compile time
2011-09-16	added to the bootloader iProduct and iManufacturer strings identifying board ↵	Zach Eveland
	as an "Arduino Leonardo" manufactured by "Arduino LLC"
2011-09-16	faster LED breathing animation in bootloader	Zach Eveland

2011-09-08	updated Leonardo INF with correct PID and created new Micro INF.	Zach Eveland

2011-09-08	in bootloader reduced delay between receiving stk500 'Q' and jumping to ↵	Zach Eveland
	application
2011-09-08	disabling watchdog in bootloader	Zach Eveland

2011-09-08	misc. bootloader fixes: increased wait time after receiving avrdude 'Q', ↵	Zach Eveland
	increased bootloader timeout, and fixed LED one-shot timing
2011-09-08	Revert "added Micro section to boards.txt. specified different bootloader ↵	Zach Eveland
	hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt" This reverts commit 3b5122e13837eede7c10acf484efdee4d03e802d.
2011-09-08	added Micro section to boards.txt. specified different bootloader hex files ↵	Zach Eveland
	for Leonardo and Micro (differ only by PID). added PID entries to boards.txt
2011-09-08	changed PIDs for Leonardo and Micro. PIDs are now defined in the Makefile	Zach Eveland

2011-09-08	removed all bootloader mass storage and MSC references	Zach Eveland

2011-08-27	bootloader ends as soon as sketch upload finishes. restored pulsing of LED ↵	Zach Eveland
	while bootloader running.
2011-08-14	LEDs for D13, TX, and RX are more in line with Uno-like behavior during ↵	Zach Eveland
	sketch uploading. D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14	rebuilt Diskloader, added LED control macros for Leonardo, removed ↵	Zach Eveland
	Microtouch defines
2011-08-14	increased bootloader delay to approx. 3.5 s	Zach Eveland

2011-08-11	diskloader source and binary for 32u4	Zach Eveland

2011-01-15	Fix to optiboot infinite loop problem.	David A. Mellis
	Explicitly setting R1 to 0 so that the watchdog timer is properly initializing, preventing it from timing out and resetting the processor. http://code.google.com/p/optiboot/issues/detail?id=26 http://code.google.com/p/arduino/issues/detail?id=446
2010-09-24	Adding the Mega 2560 bootloader and boards.txt / boards menu entry.	David A. Mellis

2010-09-22	Adding optiboot and Arduino Uno boards menu entry.	David A. Mellis

2010-08-07	Adding ATmega328 version of the Arduino BT bootloader, along with a Makefile ↵	David A. Mellis
	for building it.
2009-05-08	Adding ATmega328 bootloader for the Pro and Pro Mini running at 8 MHz ↵	David A. Mellis
	(3.3V). Uses the USART0 double speed mode, which according to Nathan from Sparkfun, is necessary to achieve reliable communication at 57600 baud.
2009-03-25	Adding support for the Arduino Mega (ATmega1280) to the core and bootloader.	David A. Mellis

2009-03-24	Renaming atmega168 bootloader directory to atmega since it's no longer ↵	David A. Mellis
	atmega168 specific. Updating boards.txt accordingly.
2008-11-26	Setting atmega328 bootloader baud rate to 57600 (for now) and adding isp ↵	David A. Mellis
	targets to makefile (e.g. diecimila_isp, atmega328_isp).
2008-11-09	Adding ATmega328 support.	David A. Mellis

2008-10-11	* Updating version number to 0013.	David A. Mellis
	* Updating ATmega168 bootloader to work with standard distributions of avrdude (responding to signature requests made with the universal SPI command) and correctly store EEPROM data. Thanks to ladyada. * Changing compilation process to generate .eep file and allow for use of EEMEM directive (although not yet uploading EEPROM data).
2008-10-11	Reindenting the ATmega168 bootloader file. It was a mess (and still is ↵	David A. Mellis
	somewhat of one).
2008-09-06	Incorporating ladyada's watchdog timer changes into the bootloader source, ↵	David A. Mellis
	but only compiling them in for the Pro and Pro Mini (since Nathan includes them in the bootloader he burns to the board). Added a WATCHDOG_MODS flag to the Makefile to specify that they should be included. Recompiled the pro .hex file to include them.
2008-08-16	Adding Nano and Pro (8 MHz) to boards.txt file; updating Makefile for ↵	David A. Mellis
	atmega168 bootloader based on Nathan's changes to allow for customizing of more parameters per-board; including Pro 8 MHz .hex compiled bootloader file; not updating the Diecimila or NG .hex files.
2007-10-09	Adding LilyPad bootloader and adding LilyPad to board definition file.	David A. Mellis

2007-10-06	Moving bootloaders into the hardware/bootloaders directory.	David A. Mellis