arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2011-10-10	Makefile modification to allow building optiboot in more environments.	WestfW
	Allows building within the Arduino Source tree, and within the Arduino IDE tree, as well as using CrossPack on Mac. Adds README.TXT to track arduino-specific changes (and documents the new build options.) This addresses Arduino issue: http://code.google.com/p/arduino/issues/detail?id=487 And optiboot issue http://code.google.com/p/optiboot/issues/detail?id=1 (which can be thought of as a subset of the Arduno issue.) Note that the binaries produced after these Makefile changes (using any of the compile environments) are identical to those produced by the crosspack-20100115 environment on a Mac. (cherry picked from commit 2d2ed324b48e709f59a002cb274ed60bb0ebc911)
2011-09-16	Updating bootloader comments.	David A. Mellis

2011-09-16	Updating Micro bootloader (previous one was identical to Leonardo).	David A. Mellis

2011-09-16	new bootloader binaries for Micro and Leonardo - uses new assignment for ↵	Zach Eveland
	TXLED pin
2011-09-16	updated pin mappings for bootloader and pins_arduino.h in anticipation of ↵	Zach Eveland
	final hardware.
2011-09-16	restored Micro entry in boards.txt, made separate bootloader images for ↵	Zach Eveland
	Leonardo and Micro.
2011-09-16	bootloader iProduct definition changed to "Arduino Leonardo Bootloader" or ↵	Zach Eveland
	"Arduino Micro Bootloader". selection depends on PID passed in at compile time
2011-09-16	added to the bootloader iProduct and iManufacturer strings identifying board ↵	Zach Eveland
	as an "Arduino Leonardo" manufactured by "Arduino LLC"
2011-09-16	faster LED breathing animation in bootloader	Zach Eveland

2011-09-08	updated Leonardo INF with correct PID and created new Micro INF.	Zach Eveland

2011-09-08	in bootloader reduced delay between receiving stk500 'Q' and jumping to ↵	Zach Eveland
	application
2011-09-08	disabling watchdog in bootloader	Zach Eveland

2011-09-08	misc. bootloader fixes: increased wait time after receiving avrdude 'Q', ↵	Zach Eveland
	increased bootloader timeout, and fixed LED one-shot timing
2011-09-08	Revert "added Micro section to boards.txt. specified different bootloader ↵	Zach Eveland
	hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt" This reverts commit 3b5122e13837eede7c10acf484efdee4d03e802d.
2011-09-08	added Micro section to boards.txt. specified different bootloader hex files ↵	Zach Eveland
	for Leonardo and Micro (differ only by PID). added PID entries to boards.txt
2011-09-08	changed PIDs for Leonardo and Micro. PIDs are now defined in the Makefile	Zach Eveland

2011-09-08	removed all bootloader mass storage and MSC references	Zach Eveland

2011-08-27	bootloader ends as soon as sketch upload finishes. restored pulsing of LED ↵	Zach Eveland
	while bootloader running.
2011-08-14	LEDs for D13, TX, and RX are more in line with Uno-like behavior during ↵	Zach Eveland
	sketch uploading. D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14	rebuilt Diskloader, added LED control macros for Leonardo, removed ↵	Zach Eveland
	Microtouch defines
2011-08-14	increased bootloader delay to approx. 3.5 s	Zach Eveland

2011-08-11	diskloader source and binary for 32u4	Zach Eveland

2011-01-15	Fix to optiboot infinite loop problem.	David A. Mellis
	Explicitly setting R1 to 0 so that the watchdog timer is properly initializing, preventing it from timing out and resetting the processor. http://code.google.com/p/optiboot/issues/detail?id=26 http://code.google.com/p/arduino/issues/detail?id=446
2010-09-24	Adding the Mega 2560 bootloader and boards.txt / boards menu entry.	David A. Mellis

2010-09-22	Adding optiboot and Arduino Uno boards menu entry.	David A. Mellis

2010-08-07	Adding ATmega328 version of the Arduino BT bootloader, along with a Makefile ↵	David A. Mellis
	for building it.
2009-05-08	Adding ATmega328 bootloader for the Pro and Pro Mini running at 8 MHz ↵	David A. Mellis
	(3.3V). Uses the USART0 double speed mode, which according to Nathan from Sparkfun, is necessary to achieve reliable communication at 57600 baud.
2009-03-25	Adding support for the Arduino Mega (ATmega1280) to the core and bootloader.	David A. Mellis

2009-03-24	Renaming atmega168 bootloader directory to atmega since it's no longer ↵	David A. Mellis
	atmega168 specific. Updating boards.txt accordingly.
2008-11-26	Setting atmega328 bootloader baud rate to 57600 (for now) and adding isp ↵	David A. Mellis
	targets to makefile (e.g. diecimila_isp, atmega328_isp).
2008-11-09	Adding ATmega328 support.	David A. Mellis

2008-10-11	* Updating version number to 0013.	David A. Mellis
	* Updating ATmega168 bootloader to work with standard distributions of avrdude (responding to signature requests made with the universal SPI command) and correctly store EEPROM data. Thanks to ladyada. * Changing compilation process to generate .eep file and allow for use of EEMEM directive (although not yet uploading EEPROM data).
2008-10-11	Reindenting the ATmega168 bootloader file. It was a mess (and still is ↵	David A. Mellis
	somewhat of one).
2008-09-06	Incorporating ladyada's watchdog timer changes into the bootloader source, ↵	David A. Mellis
	but only compiling them in for the Pro and Pro Mini (since Nathan includes them in the bootloader he burns to the board). Added a WATCHDOG_MODS flag to the Makefile to specify that they should be included. Recompiled the pro .hex file to include them.
2008-08-16	Adding Nano and Pro (8 MHz) to boards.txt file; updating Makefile for ↵	David A. Mellis
	atmega168 bootloader based on Nathan's changes to allow for customizing of more parameters per-board; including Pro 8 MHz .hex compiled bootloader file; not updating the Diecimila or NG .hex files.
2007-10-09	Adding LilyPad bootloader and adding LilyPad to board definition file.	David A. Mellis

2007-10-06	Moving bootloaders into the hardware/bootloaders directory.	David A. Mellis