arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2012-01-10	made the bootloader's LED control macro names less offensive	Zach Eveland
	TX_LED_OFF() instead of TXLED0, etc.
2012-01-10	added conditional compilation for HID, removed conditional compilation for ↵	Zach Eveland
	CDC (is always used). disabled HID by default. also always enumerates as composite now. the bootloader must always have a CDC interface. HID is optional and not even complete to reduce size.
2012-01-10	fix bug in handling of long descriptors for bootloader USB (thank you, Todd ↵	Zach Eveland
	Krein, Limor Fried, and Phillip Torrone) descriptors longer than 255 bytes were being shortened, causing problems with enumeration under Windows
2011-12-31	reset the Leonardo board when leaving the bootloader, before starting the sketch	Zach Eveland
	Done so all IO and other registers are properly reinitialized when a new sketch is uploaded or when an existing sketch is started. Uses a watchdog timeout with a 15 ms period to accomplish the reset. Bootloader checks the reason for reset and only enumerates as bootloader and enters the programming loop if reset was NOT caused by WDT.
2011-12-26	bootloader merged with blink sketch	Zach Eveland
	full set of descriptors in sketch fixes driver installation issue on Win7.
2011-11-16	Leonardo bootloader now sends iSerial string during enumeration. Seems to ↵	Zach Eveland
	satisfy Windows' composite device requirements.
2011-11-09	restored original non-interrupt-driven DiskLoader	Zach Eveland
	Interrupt-driven version was a dead-end - too many bugs with that approach.
2011-10-31	changed Leonardo PID to 0x0032 for Diskloader testing. updated .inf to match.	Zach Eveland

2011-10-31	check to see if a sketch has been loaded before jumping out of bootloader	Zach Eveland

2011-10-27	bootloader runs sketch after timeout, added bootloader LED breathing	Zach Eveland

2011-10-27	cosmetic changes - remove old comments, unused code	Zach Eveland

2011-10-27	removed conditional compilation checks for CDC_ENABLED	Zach Eveland
	bootloader must always have CDC enabled
2011-10-27	removed old comments and unused USB core code	Zach Eveland

2011-10-27	brought nuevo_diskloader changes over to diskloader	Zach Eveland
	Moved nuevo_diskloader files into diskloader directory. Changed back to real PID for Leonardo
2011-09-16	Updating bootloader comments.	David A. Mellis

2011-09-16	Updating Micro bootloader (previous one was identical to Leonardo).	David A. Mellis

2011-09-16	new bootloader binaries for Micro and Leonardo - uses new assignment for ↵	Zach Eveland
	TXLED pin
2011-09-16	updated pin mappings for bootloader and pins_arduino.h in anticipation of ↵	Zach Eveland
	final hardware.
2011-09-16	restored Micro entry in boards.txt, made separate bootloader images for ↵	Zach Eveland
	Leonardo and Micro.
2011-09-16	bootloader iProduct definition changed to "Arduino Leonardo Bootloader" or ↵	Zach Eveland
	"Arduino Micro Bootloader". selection depends on PID passed in at compile time
2011-09-16	added to the bootloader iProduct and iManufacturer strings identifying board ↵	Zach Eveland
	as an "Arduino Leonardo" manufactured by "Arduino LLC"
2011-09-16	faster LED breathing animation in bootloader	Zach Eveland

2011-09-08	updated Leonardo INF with correct PID and created new Micro INF.	Zach Eveland

2011-09-08	in bootloader reduced delay between receiving stk500 'Q' and jumping to ↵	Zach Eveland
	application
2011-09-08	disabling watchdog in bootloader	Zach Eveland

2011-09-08	misc. bootloader fixes: increased wait time after receiving avrdude 'Q', ↵	Zach Eveland
	increased bootloader timeout, and fixed LED one-shot timing
2011-09-08	Revert "added Micro section to boards.txt. specified different bootloader ↵	Zach Eveland
	hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt" This reverts commit 3b5122e13837eede7c10acf484efdee4d03e802d.
2011-09-08	added Micro section to boards.txt. specified different bootloader hex files ↵	Zach Eveland
	for Leonardo and Micro (differ only by PID). added PID entries to boards.txt
2011-09-08	changed PIDs for Leonardo and Micro. PIDs are now defined in the Makefile	Zach Eveland

2011-09-08	removed all bootloader mass storage and MSC references	Zach Eveland

2011-08-27	bootloader ends as soon as sketch upload finishes. restored pulsing of LED ↵	Zach Eveland
	while bootloader running.
2011-08-14	LEDs for D13, TX, and RX are more in line with Uno-like behavior during ↵	Zach Eveland
	sketch uploading. D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14	rebuilt Diskloader, added LED control macros for Leonardo, removed ↵	Zach Eveland
	Microtouch defines
2011-08-14	increased bootloader delay to approx. 3.5 s	Zach Eveland

2011-08-11	diskloader source and binary for 32u4	Zach Eveland