aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-13Moving into firmwares directory.David A. Mellis
2012-09-13Moving ATmegaXXU2 firmwares into subdirectory.David A. Mellis
2012-09-13Moving ATmega32U4 Timer 2 #undef's to Leonardo pins_arduino.h file.David A. Mellis
2012-09-13Merge pull request #102 from sgk/leonardoToneDavid A. Mellis
Fix for tone() on Leonardo.
2012-09-13Avoid serial buffer overrun on leonardoPeter Van Hoyweghen
2012-09-10Merge branch 'master' into upload-16u2Cristian Maglie
Conflicts: hardware/arduino/sam/cores/arduino/USB/CDC.cpp hardware/arduino/sam/cores/arduino/USB/USBCore.cpp
2012-09-07Upload over debug portCristian Maglie
2012-09-03LiquidCrystal library is already multiplatform compliant, moved into ↵Cristian Maglie
libraries folder
2012-08-30Changing setting of the UMSELn bits (for UART mode) and serial config values.David A. Mellis
Before, the UMSELn1 bit was being to set to 1, putting the UART into a reserved mode. Now, we only set the high (0x80) bit to 1 for the ATmega8, which is needed to access UCSRnC (whose i/o address is shared with UBRRH). Also, no longer bitwise-or the new config with the existing register value, because we're actually configuring all the settings in the register. (We're not using UCPOL, but it's supposed to be 0 in asynchronous mode.)
2012-08-30Renaming serial config constants to, e.g., SERIAL_8N1.David A. Mellis
2012-08-30Merge pull request #109 from Alarus/masterDavid A. Mellis
Serial.begin() parameter to set data bits, parity, stop bits.
2012-08-30Fixing Serial.flush() breakage on Leonardo (WestFW).David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=1020
2012-08-29Fixing ATmega8 breakage from flush() change. (WestFW)David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=1019
2012-08-29Adding overloads so Serial.write(0) works.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=1006
2012-08-28Serial.flush() waits for last character to be transmitted (michele.mazzucchi)David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=871
2012-08-16Fix issue 866Adam Dunlap
Fix issue 866 by adding a const qualifier to what the F macro casts to.
2012-08-14Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
New Serial.begin(baud, config);
2012-08-14Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
New Serial.begin(baud, config);
2012-08-14Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
New Serial.begin(baud, config);
2012-08-14Merge branch 'new-linker'Cristian Maglie
Conflicts: hardware/arduino/sam/variants/arduino_due_x/linker_scripts/gcc/flash.ld
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-08Fix for tone() on Leonardo.Shigeru KANEMOTO
2012-08-06Fixed all boards.txt definitions in AVR arch.Cristian Maglie
2012-08-04Merge branch 'audio'Cristian Maglie
Conflicts: hardware/arduino/sam/variants/arduino_due_x/libsam_sam3x8e_gcc_rel.a hardware/arduino/sam/variants/arduino_due_x/libsam_sam3x8e_gcc_rel.a.txt hardware/arduino/sam/variants/arduino_due_x/variant.h
2012-07-15Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560.David A. Mellis
It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload). http://code.google.com/p/arduino/issues/detail?id=806
2012-06-28Print "ovf" if float to be printed doesn't fit in a long.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=967
2012-06-27Merged masterCristian Maglie
2012-06-26Added default extra_flags parameter to allow build on all boardsCristian Maglie
2012-06-26Merged upstream Arduino master branchCristian Maglie
2012-06-23Print "inf" for infinite floating point numbers (using isinf()).David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=961
2012-06-14Adding write(str) and write(buf, size) for USB CDC.David A. Mellis
So that they work on the Leonardo. http://code.google.com/p/arduino/issues/detail?id=958
2012-06-08Added Ethernet for ARM. Updated examples.Cristian Maglie
2012-06-04Printing NaN values as "nan" in printFloat().David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=946
2012-06-03Check for NULL pointer in Print.write().David A. Mellis
Otherwise, trying to print(NULL) or write(NULL) could print a random character. http://code.google.com/p/arduino/issues/detail?id=941
2012-06-02Added support for interrupt on INT2 and INT3 on the LeonardoKristian Lauszus
2012-05-25Fixed avrdude path for macos and winCristian Maglie
2012-05-25Simplified boards.txt fileCristian Maglie
2012-05-25Merge branch 'master' into arduino-1.0.1-mergedCristian Maglie
Included latest fixes
2012-05-25Bugfix: IDE now works if installed on a folder path containing spacesCristian Maglie
2012-05-23Merge of arduino-1.0.1. Work in progress...Cristian Maglie
2012-05-22Pre-merge upstream ArduinoCristian Maglie
2012-05-21Merge remote-tracking branch 'upstream/master'David A. Mellis
2012-05-20Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo.David A. Mellis
2012-05-19added pin change interrupt defines for Leonardo. fix for broken software ↵Zach Eveland
serial on Leonardo
2012-05-16Adding readString() and readStringUntil() to Stream (Adrian McEwen).David A. Mellis
This isn't necessarily a particularly efficient implementation (it allocates memory one character at a time and so may lead to fragmentation) but it seems to work. http://code.google.com/p/arduino/issues/detail?id=454
2012-05-15Mouse.isPressed() now checks only for left button by defaultZach Eveland
if no argument is given now checks left button by default to be consistent with press() and release() (thanks, David Mellis)