aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-10Update version to reflect previous edit. Sigh.WestfW
(cherry picked from commit e28b716f88968477fa0f42dbd88c539573e91886)
2011-10-10Shrink code by using registers for variables "length" and "address"WestfW
http://code.google.com/p/optiboot/issues/detail?id=33 Fix high-value watchdog timeouts on ATmega8 http://code.google.com/p/optiboot/issues/detail?id=38 Change "start app on bad commands" code to start the app via the watchdog timer, so that the app is always started with the chip in fully reset state. http://code.google.com/p/optiboot/issues/detail?id=37 (cherry picked from commit 6f7687b0f925cb07447cbbcc692766c51c02f700)
2011-10-10Add a version number to the optiboot source and binary.WestfW
http://code.google.com/p/arduino/issues/detail?id=554 end of flash memory where they can be read (at least in theory) by device programmers, hex-file examination, or application programs. This is done by putting the version number in a separate section (".version"), and using linker/objcopy magic to locate that section as appropriate for the target chip. (See http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html for some discussion on the details.) Start the version at 4.1 (the last "packaged" version of optiboot was called version 3, so the "top of source" would be 4.0, and adding the version number makes 4.1) Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple section start addresses can be defined. Change the _isp makefile definitions to make the bootloader section readable (but not writable) by the application section. (This would need to be done elsewhere as well to handle all bootloader programming techniques. Notably Arduino's boards.txt Note that this change does not change the "code" portion of optiboot at all. The only diffs in the .hex files are the added version word at the end of flash memory. (cherry picked from commit 00706284dec3171646419839bd4a9e3f1c2d7088)
2011-10-10Update shell script makeallWestfW
(cherry picked from commit d4632cb09593e44bc8624c6b9a432c672fe4ad45)
2011-10-10This is a relatively significant edit that brings the Arduino copy ofWestfW
optiboot up-to-date with the optiboot source repository as of Jun-2011 (the last changes made in the optiboot repository were in Oct-2010) This adds support for several plaforms, fixes the "30k bug", and refactors the source to have separate stk500.h, boot.h, and pin_defs.h These are the arduino opticode issues fixed: http://code.google.com/p/arduino/issues/detail?id=380 optiboot has problems upload sketches bigger than 30 KB http://code.google.com/p/arduino/issues/detail?id=556 update optiboot to the point of the latest optiboot project sources. These are issues that had been solved in the optiboot source aready: http://code.google.com/p/arduino/issues/detail?id=364 optiboot leaves timer1 configured when starting app, breaks PWM on pin 9 and 10. (fixed with a workaround in arduino core.) aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e Support for ATmega8 and mega88. Fix fuse settings for mega168 _ISP targets Additional new platforms (mega, sanguino) http://code.google.com/p/optiboot/issues/detail?id=26 Set R1 to 0 (already in arduino code) http://code.google.com/p/optiboot/issues/detail?id=36&can=1 Fails to build correctly for mega88 After this commit, the only differences between the Arduino optiboot.c and the optiboot repository optiboot.c are cosmetic. (cherry picked from commit e2812ef91cc1489527827dcd14c843f3b3244f36)
2011-10-10http://code.google.com/p/arduino/issues/detail?id=517WestfW
Remove the trailing comments when setting fuse values for the various *_isp targets, so that they won't cause avrdude errors. This was done the same way as in the optiboot source tree: http://code.google.com/p/optiboot/issues/detail?id=17 http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20 (cherry picked from commit 6840b77643a75b850d48bed80c578da484e6559f)
2011-10-10Makefile modification to allow building optiboot in more environments.WestfW
Allows building within the Arduino Source tree, and within the Arduino IDE tree, as well as using CrossPack on Mac. Adds README.TXT to track arduino-specific changes (and documents the new build options.) This addresses Arduino issue: http://code.google.com/p/arduino/issues/detail?id=487 And optiboot issue http://code.google.com/p/optiboot/issues/detail?id=1 (which can be thought of as a subset of the Arduno issue.) Note that the binaries produced after these Makefile changes (using any of the compile environments) are identical to those produced by the crosspack-20100115 environment on a Mac. (cherry picked from commit 2d2ed324b48e709f59a002cb274ed60bb0ebc911)
2011-10-10Merge pull request #30 from WestfW/masterDavid A. Mellis
Significant optiboot upgrade.
2011-10-10Moving USBasp in programmers menu.David A. Mellis
2011-10-10Merge pull request #41 from chiva/patch-1David A. Mellis
Added USBasp to programmers list
2011-10-10Fixing more warnings (Paul Stoffregen).David A. Mellis
2011-10-05Explicitly set the SHELL variable when OS=windows, so that we'll useWestfW
the same shell regardless of whether other shells are installed (different shells have different behavior WRT directory component separators, so this matters. http://code.google.com/p/arduino/issues/detail?id=667 )
2011-10-02Fixing warnings in Stream (Paul Stoffregen)David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=208
2011-09-30Using alternate timer 0 overflow interrupt signal name for ATtiny24/44/84.David A. Mellis
2011-09-28Changing Ethernet upload protocol from stk500 to arduino.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=649
2011-09-16Updating bootloader comments.David A. Mellis
2011-09-16Commenting out micro board for now since it's not being released yet.David A. Mellis
2011-09-16Updating Micro bootloader (previous one was identical to Leonardo).David A. Mellis
2011-09-16added Mouse.isPressed() methodZach Eveland
2011-09-16made some Keyboard methods privateZach Eveland
2011-09-16added support for TIMER4D used for PWM on Leonardo and Micro D6Zach Eveland
2011-09-16new bootloader binaries for Micro and Leonardo - uses new assignment for ↵Zach Eveland
TXLED pin
2011-09-16updated pin assignment again based on design files for LeonardoZach Eveland
2011-09-16updated pin mappings for bootloader and pins_arduino.h in anticipation of ↵Zach Eveland
final hardware.
2011-09-16restored accidentally-deleted Leonardo type in boards.txtZach Eveland
2011-09-16restored Micro entry in boards.txt, made separate bootloader images for ↵Zach Eveland
Leonardo and Micro.
2011-09-16Merge https://github.com/arduino/32U4 into new-extensionZach Eveland
2011-09-16added automatic one-shot TX and RX LED control for sketch USBZach Eveland
2011-09-16Moving Leonardo after Uno.David A. Mellis
2011-09-16added to sketch iProduct and iManufacturer strings identifying board as ↵Zach Eveland
either an "Arduino Leonardo" or "Arduino Micro" manufactured by "Arduino LLC"
2011-09-16bootloader iProduct definition changed to "Arduino Leonardo Bootloader" or ↵Zach Eveland
"Arduino Micro Bootloader". selection depends on PID passed in at compile time
2011-09-16added to the bootloader iProduct and iManufacturer strings identifying board ↵Zach Eveland
as an "Arduino Leonardo" manufactured by "Arduino LLC"
2011-09-16faster LED breathing animation in bootloaderZach Eveland
2011-09-16Merge branch 'new-extension' of https://github.com/arduino/Arduino into ↵Zach Eveland
new-extension
2011-09-16Added USBasp to programmers listSantiago Reig
2011-09-13fixed analog pin mapping for 32u4Zach Eveland
2011-09-13fixed Mouse button assignmentsZach Eveland
2011-09-12made Mouse.buttons() private. removed MOUSE_ALL macroZach Eveland
2011-09-09Don't consume trailing char in parseInt() and parseFloat (Paul Stoffregen).David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=624
2011-09-08updated Leonardo INF with correct PID and created new Micro INF.Zach Eveland
2011-09-08in bootloader reduced delay between receiving stk500 'Q' and jumping to ↵Zach Eveland
application
2011-09-08Merge branch 'new-extension' of https://github.com/arduino/Arduino into ↵Zach Eveland
new-extension Conflicts: build/linux/dist/tools/avrdude.conf
2011-09-08fixed bug where sketches over 28k caused subsequent auto-reset-and-upload ↵Zach Eveland
attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable.
2011-09-08disabling watchdog in bootloaderZach Eveland
2011-09-08misc. bootloader fixes: increased wait time after receiving avrdude 'Q', ↵Zach Eveland
increased bootloader timeout, and fixed LED one-shot timing
2011-09-08added compile-time definition of sketch PID. PID is pulled from ↵Zach Eveland
variants/leonardo or the new variants/micro as appropriate.
2011-09-08removed leftover pins/ directoryZach Eveland
2011-09-08Revert "added Micro section to boards.txt. specified different bootloader ↵Zach Eveland
hex files for Leonardo and Micro (differ only by PID). added PID entries to boards.txt" This reverts commit 3b5122e13837eede7c10acf484efdee4d03e802d.
2011-09-08Revert "support compile-time passing of PID to Leonardo/Micro sketches. PID ↵Zach Eveland
comes from boards.txt - different for Micro and Leonardo" This reverts commit 3e0d195492247a7e7c2ec72476bf2a0991ea6d48.
2011-09-08support compile-time passing of PID to Leonardo/Micro sketches. PID comes ↵Zach Eveland
from boards.txt - different for Micro and Leonardo
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-23 02:42:28 +0000