arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2012-02-22	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland

2012-02-14	Leonardo now checks whether bootloader should be run after a WDT event.	Zach Eveland
	Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch. Test in a sketch by adding to setup(): wdt_enable(WDTO_2S); Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader). Had to cut out unused descriptor code to make the bootloader still fit in 4k.
2012-02-14	Changed Leonardo fuses to select longer clock startup time.	Zach Eveland
	Done with the aim of discriminating more reliably between reset sources.
2012-02-14	Leonardo bootloader jumps straight to sketch for a power-on reset.	Zach Eveland
	Disconnect programmer after burning bootloader to get the full effect. ICSP and JTAG programmers do a hardware reset after any reset condition, confusing the firmware a little.
2012-02-13	Leonardo auto-reset-and-upload changes for Windows (explanation below)	Zach Eveland
	On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated. Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13	changed Leonardo bootloader and sketch PID values again (now 0x0701 for ↵	Zach Eveland
	bootloader, 0x0801 for sketch)
2012-02-12	prog_char -> char PROGMEM in Print.cpp	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=795
2012-02-08	adjusting descriptors - trying to prevent sketch and bootloader from ↵	Zach Eveland
	grabbing different COM numbers on Windows
2012-02-07	changed Caterina descriptors - Arduino LLC VID, new PID, manufacturer ↵	Zach Eveland
	string, and serial number
2012-02-07	fixed bug in Caterina which caused some programming instructions to fail	Zach Eveland
	Timer 1 interrupts were trashing self-programming timing. Now disable Timer 1 compare match before doing Flash tasks and reenable afterward.
2012-02-06	increased Leonardo bootloader timeout to 16 seconds	Zach Eveland

2012-02-03	proper bootloader timeout and LED control in Leonardo bootloader	Zach Eveland

2012-02-03	fixed starting Leonardo bootloader from sketch	Zach Eveland
	AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03	modify boards.txt with new settings for Caterina_LUFA	Zach Eveland

2012-02-03	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland

2012-02-03	Making head and tail unsigned to avoid division in serial ISR.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=776
2012-01-24	Caterina now cleanly hands off operation to the sketch	Zach Eveland
	had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2012-01-21	move interrupt vector table to application section before jumping to it ↵	Zach Eveland
	after upload finished.
2012-01-21	Leonardo bootloader checks reason for reset and jumps immediately to sketch ↵	Zach Eveland
	if reset was caused by WDT
2012-01-19	stripped all LUFA LED control. from LUFA-based Caterina	Zach Eveland

2012-01-19	changed fuses to select 4k bootloader for LUFA-based Caterina	Zach Eveland

2012-01-19	added Board/LEDs.h to LUFA-based Caterina	Zach Eveland

2012-01-19	superficial changes to stock LUFA CDC bootloader - renamed project, removed ↵	Zach Eveland
	unnecessary files
2012-01-19	initial checkin of LUFA 111009 CDC bootloader	Zach Eveland

2012-01-10	made Leonardo and Micro bootloader PIDs same as sketch PIDs	Zach Eveland

2012-01-10	restored composite and non-composite device descriptors (removed in ↵	Zach Eveland
	4b05c3fc7529477fb7031d42103c15b50a6b58be) Windows wants to see both types of device descriptors.
2012-01-10	reenabled HID to force Leonardo bootloader to enumerate as a composite device	Zach Eveland

2012-01-10	renamed DiskLoader to Caterina (after Leonardo's mom)	Zach Eveland

2012-01-10	changed USB PID for Leonardo and Micro bootloaders	Zach Eveland
	sketch and bootloader will use different PIDs to distinguish one from the other.
2012-01-10	fixed warning when comparing pgm_read_word(0) to -1 (thanks, Limor Fried and ↵	Zach Eveland
	Phillip Torrone)
2012-01-10	got rid of u8, u16, u32 typedefs in Diskloader	Zach Eveland
	done to bring types in line with others in Arduino core
2012-01-10	made the bootloader's LED control macro names less offensive	Zach Eveland
	TX_LED_OFF() instead of TXLED0, etc.
2012-01-10	added conditional compilation for HID, removed conditional compilation for ↵	Zach Eveland
	CDC (is always used). disabled HID by default. also always enumerates as composite now. the bootloader must always have a CDC interface. HID is optional and not even complete to reduce size.
2012-01-10	fix bug in handling of long descriptors for bootloader USB (thank you, Todd ↵	Zach Eveland
	Krein, Limor Fried, and Phillip Torrone) descriptors longer than 255 bytes were being shortened, causing problems with enumeration under Windows
2012-01-10	Merge branch 'master' of github.com:arduino/Arduino into new-extension	Zach Eveland

2012-01-04	Adding links to documentation of boards.txt and programmers.txt files.	David A. Mellis

2012-01-02	Adding INPUT_PULLUP option pinMode(). (Paul Stoffregen).	David A. Mellis
	This also changes pinMode(pin, INPUT); to explicitly disable the pull-up resistor, even if it was previously set. http://code.google.com/p/arduino/issues/detail?id=246
2012-01-02	Fixing findUntil() problem with repeated initial characters. (Jeffery.zksun)	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=768
2012-01-02	Fixing warnings (unsigned comparisons to 0). (maniacbug)	David A. Mellis

2012-01-02	Fixing static is not at beginning of declaration warnings (maniacbug).	David A. Mellis

2011-12-31	reset the Leonardo board when leaving the bootloader, before starting the sketch	Zach Eveland
	Done so all IO and other registers are properly reinitialized when a new sketch is uploaded or when an existing sketch is started. Uses a watchdog timeout with a 15 ms period to accomplish the reset. Bootloader checks the reason for reset and only enumerates as bootloader and enters the programming loop if reset was NOT caused by WDT.
2011-12-31	Merge branch 'master' of github.com:arduino/Arduino into new-extension	Zach Eveland

2011-12-30	Simplifying microseconds <-> clock cycles conversions. (Rob Tillaart)	David A. Mellis
	This should fix problems with overflows in pulseIn(). It may make millis() slightly less precise for clock speeds that aren't multiple of 1 million, but we don't really support those anyway. http://code.google.com/p/arduino/issues/detail?id=675
2011-12-28	Fixing ArduinoISP sketch by lowering baud rate to 9600 (from 19200).	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=661
2011-12-26	bootloader merged with blink sketch	Zach Eveland
	full set of descriptors in sketch fixes driver installation issue on Win7.
2011-12-20	changed Keyboard write() method to type(). Made write() an alias for type() ↵	Zach Eveland
	to allow subclassing by Stream.
2011-12-20	Revert "changed Keyboard write() method to type(). Made write() an alias ↵	Zach Eveland
	for type() to allow subclassing by Stream." This reverts commit de1d5fc0cb82874c0dcb766c5fb27ab36c5cb32c.
2011-12-20	changed Keyboard write() method to type(). Made write() an alias for type() ↵	Zach Eveland
	to allow subclassing by Stream.
2011-12-19	fixed attachInterrupt() on Leonardo	Zach Eveland
	had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs.
2011-12-18	added asynchronous buffering of received CDC characters	Zach Eveland
	This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp. Adds public accept() method to CDC.