arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2012-08-30	Merge pull request #109 from Alarus/master	David A. Mellis
	Serial.begin() parameter to set data bits, parity, stop bits.
2012-08-30	Fixing Serial.flush() breakage on Leonardo (WestFW).	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=1020
2012-08-29	Fixing ATmega8 breakage from flush() change. (WestFW)	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=1019
2012-08-29	Adding overloads so Serial.write(0) works.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=1006
2012-08-28	Serial.flush() waits for last character to be transmitted (michele.mazzucchi)	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=871
2012-08-16	Fix issue 866	Adam Dunlap
	Fix issue 866 by adding a const qualifier to what the F macro casts to.
2012-08-14	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	New Serial.begin(baud, config);
2012-08-14	Update hardware/arduino/cores/arduino/HardwareSerial.h	Alarus
	New Serial.begin(baud, config);
2012-08-14	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	New Serial.begin(baud, config);
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.h	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.h	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-07-15	Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560.	David A. Mellis
	It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload). http://code.google.com/p/arduino/issues/detail?id=806
2012-06-28	Print "ovf" if float to be printed doesn't fit in a long.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=967
2012-06-23	Print "inf" for infinite floating point numbers (using isinf()).	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=961
2012-06-14	Adding write(str) and write(buf, size) for USB CDC.	David A. Mellis
	So that they work on the Leonardo. http://code.google.com/p/arduino/issues/detail?id=958
2012-06-04	Printing NaN values as "nan" in printFloat().	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=946
2012-06-03	Check for NULL pointer in Print.write().	David A. Mellis
	Otherwise, trying to print(NULL) or write(NULL) could print a random character. http://code.google.com/p/arduino/issues/detail?id=941
2012-06-02	Added support for interrupt on INT2 and INT3 on the Leonardo	Kristian Lauszus

2012-05-21	Merge remote-tracking branch 'upstream/master'	David A. Mellis

2012-05-20	Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo.	David A. Mellis

2012-05-19	added pin change interrupt defines for Leonardo. fix for broken software ↵	Zach Eveland
	serial on Leonardo
2012-05-16	Adding readString() and readStringUntil() to Stream (Adrian McEwen).	David A. Mellis
	This isn't necessarily a particularly efficient implementation (it allocates memory one character at a time and so may lead to fragmentation) but it seems to work. http://code.google.com/p/arduino/issues/detail?id=454
2012-05-15	Mouse.isPressed() now checks only for left button by default	Zach Eveland
	if no argument is given now checks left button by default to be consistent with press() and release() (thanks, David Mellis)
2012-05-01	renamed Leonardo USB_ class to USBDevice_ to be unambiguous. renamed "USB" ↵	Zach Eveland
	object to "USBDevice" to prevent conflict with USB Host library (thanks Massimo)
2012-04-25	changed PID values for Leonardo bootloader and sketch	Zach Eveland
	done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-19	bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried)	Zach Eveland
	was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed.
2012-04-19	bugfix for boards with a timer 4 but no channel D	Zach Eveland
	compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega
2012-04-11	merged Caterina with Blink	Zach Eveland

2012-04-11	fixed logic bug in Caterina that could stop the bootloader from entering ↵	Zach Eveland
	self-programming mode
2012-04-09	Micro I hardly knew ye	Zach Eveland

2012-04-09	Micro and Leonardo bootloaders for distribution are now merged with Blink sketch	Zach Eveland

2012-04-09	sketch USB VID and PID values are passed in from boards.txt at compile time ↵	Zach Eveland
	now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt
2012-04-09	PID and VID are no longer hard-coded in bootloader. instead they are passed ↵	Zach Eveland
	in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo
2012-04-06	Revert "Revert "added a short delay and comment to boolean operator in CDC""	Zach Eveland
	This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5.
2012-04-06	Revert "added a short delay and comment to boolean operator in CDC"	Federico Vanzati
	This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd.
2012-04-03	added a short delay and comment to boolean operator in CDC	Zach Eveland
	Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems.
2012-04-01	added Boolean operators to HardwareSerial and CDC to test whether the port ↵	Zach Eveland
	is ready to send data. Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true.
2012-03-28	fixed logic error in Keyboard.release() - now removes every occurrence of a ↵	Zach Eveland
	key if it's present more than once
2012-03-28	removed horrible multi-key Keyboard.press() and Keyboard.release() methods	Zach Eveland
	Saves 924 bytes of Flash
2012-03-28	eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() ↵	Zach Eveland
	(David Mellis). Also edit KeyboardReprogram example which was the only example using type()
2012-03-26	added methods to Keyboard to handle multiple simultaneous key presses or ↵	Zach Eveland
	releases (up to six each)
2012-03-26	Keyboard.type() now just presses and releases the key indicated - doesn't ↵	Zach Eveland
	releaseAll()
2012-03-26	added stub methods for begin() and end() to Mouse and Keyboard	Zach Eveland

2012-03-24	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland

2012-03-15	Putting ArduinoISP back to 19200 baud.	David A. Mellis
	From 9600. And lowering the delay in the heartbeat from 40 to 20, which seems to fix things again.
2012-03-14	reduced delay before starting the Leonardo bootloader	Zach Eveland
	Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening.
2012-03-14	bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.	Zach Eveland
	Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?