aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-27auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to ↵Zach Eveland
support 300 bps connection, changed core and boards.txt to match
2011-08-27bootloader ends as soon as sketch upload finishes. restored pulsing of LED ↵Zach Eveland
while bootloader running.
2011-08-24bugfix - Serial.write() would try to send even if no CDC connection was open.Zach Eveland
2011-08-24changed auto-reset method for upload: now triggered by opening port at 1200 bpsZach Eveland
2011-08-18USB microcontrollers will call USB.attach() after init(), before setup()Zach Eveland
2011-08-18HW Serial on pins 0 and 1 works. Accessed by Serial1.* methodsZach Eveland
2011-08-16Temporary fix for auto-reset from IDE. Will reset chip when DTR is ↵Zach Eveland
asserted, no matter what CDC baud rate is selected.
2011-08-14Serial via USB worksZach Eveland
Integrated rest of Peter's USB implementation
2011-08-14LEDs for D13, TX, and RX are more in line with Uno-like behavior during ↵Zach Eveland
sketch uploading. D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14rebuilt Diskloader, added LED control macros for Leonardo, removed ↵Zach Eveland
Microtouch defines
2011-08-14increased bootloader delay to approx. 3.5 sZach Eveland
2011-08-11cleaned up types. set D5 as not a PWM pin for now.Zach Eveland
2011-08-11committed USB API, initial HardwareSerial-USBSerial integrationZach Eveland
2011-08-11diskloader source and binary for 32u4Zach Eveland
2011-08-10support for 32u4 and Leonardo pins, uploading, and bootloader programmingZach Eveland
2011-06-04Added Printable interface class to allow printing of classes such as IPAddressDavid A. Mellis
2011-05-20Fixing 300 baud communication for serial.David A. Mellis
Because UBBR is only 12 bits, we were overflowing it at 300 baud because of the use of the U2X bit. Now we turn off U2X if it would yield a UBBR value that would overflow. Note that this breaks 300 baud communication with the computer on the Uno and Mega 2560 because the 8U2 USB-serial firmware has this same bug (and previously they cancelled each other out). Since, however, it seems more likely that people will need to use 300 baud to communicate with other (legacy) hardware than with the computer, I'm making this change. Issue for 8U2 firmware bug: http://code.google.com/p/arduino/issues/detail?id=542 http://code.google.com/p/arduino/issues/detail?id=522
2011-05-12Small optimization in HardwareSerial.David A. Mellis
begin(long) -> begin(unsigned long) Conflicts: hardware/arduino/cores/arduino/HardwareSerial.h
2011-05-07Optimizing printing of numbers (writing a single buffer).David A. Mellis
Fix from Bill Greiman via Limor.
2011-05-07Adding serialEvent(), serialEvent1(), etc.David A. Mellis
Called from within the serial receive interrupt. These are implemented as an empty weak function in the core that be overridden by the user's sketch. http://code.google.com/p/arduino/issues/detail?id=263
2011-05-07Refactoring the UART0 / USART0 receive interrupt handler.David A. Mellis
2011-05-07Changing Serial.flush() to write outgoing data, not drop incoming data.David A. Mellis
This brings it in line with most other uses of flush(), both in and out of Arduino. http://code.google.com/p/arduino/issues/detail?id=497
2011-03-31Restoring concatenation of built-in types with String.David A. Mellis
2011-03-27Adding F("foo") syntax for flash strings.David A. Mellis
2011-03-26String: removing implicit numeric conversions and new approach to "if (s)".David A. Mellis
This makes explicit the String constructors that take numeric types and chars and removes the versions of concat() and operator=() and operator+() that accept numberic types. It also replaces the operator bool() with a operator that converts to a function pointer. This allows for uses like "if (s)" but not "s + 123". See: http://www.artima.com/cppsource/safebool.html. This allowed removing the disambiguating operator+() functions and relying solely on StringSumHelper and anonymous temporaries once again. Also, now treating unsigned char's like int when constructing Strings from them, i.e. String(byte(65)) is now "65" not "A". This is consistent with the new behavior of Serial.print(byte).
2011-03-23Commenting String API behavior.David A. Mellis
2011-03-19Return an invalid string (not a partial one) when operator+() fails.David A. Mellis
2011-03-18Starting to distinguish between empty strings and invalid (null) ones.David A. Mellis
2011-03-13Protecting String copy() and move().David A. Mellis
2011-03-13Adding additional String + operators for disambiguation.David A. Mellis
The operator bool() means that you could implicitly convert a String to a bool and then add it to it an int, for example. Which means our operator+ has to match exactly or it will be ambiguous.
2011-03-13Moving move() to __GXX_EXPERIMENTAL_CXX0X__ only, adding operator bool().David A. Mellis
2011-03-12Modifying String.concat() to return success or failure, not this.David A. Mellis
Which means you can't chain multiple concat() calls together, but you can check if they succeeded or not.
2011-03-11Don't return the string when modifying its value.David A. Mellis
Changing toLowerCase(), toUpperCase(), trim() and replace() to return void instead of a reference to the string that's just been changed. That way, it's clear that the functions modify the string they've been called on.
2011-03-11Renaming append() back to concat().David A. Mellis
2011-03-11Removing F("string") syntax for now.David A. Mellis
We should probably add something like this back in later, but I want to do one thing at a time. This removes the __FlashStringHelper class as well.
2011-03-11Rewrite of the String class by Paul Stoffregen.David A. Mellis
http://www.pjrc.com/teensy/string_class_experimental.html
2011-03-09Fixing typo in boards.txt.David A. Mellis
2011-03-06Flushing outgoing and incoming data in Serial.end().David A. Mellis
That is, waiting for outgoing data to transmit and dropping any received data.
2011-03-06Fixing race condition in Serial write (Brian Cook).David A. Mellis
2011-03-06Moving TCCR1B reset into #ifdef check.David A. Mellis
2011-03-05Implemented serial transmit buffering.David A. Mellis
Now Serial.write() places characters in the transmit buffer, and the data register empty interrupt reads and transmit them. Based loosely on the implementation here: ftp://wookey.org.uk/arduino. http://code.google.com/p/arduino/issues/detail?id=262
2011-03-04Factoring pin definitions out of the core.David A. Mellis
That is, there's now a pins/ directory in a platform, which includes multiple directories, each of which has its own pins_arduino.h. The boards.txt gets a new preferences, <BOARD>.build.pins, whose values is a sub-directory of the pins/ directory (possibly with a "platform:" prefix). That sub-directory is then placed in the include path during compilation.
2011-03-03Moving all pin definitions into pins_arduino.h.David A. Mellis
This is a step towards providing portability across AVR's by simply including an appropriate header file.
2011-03-03Rearranging internal #defines in headers.David A. Mellis
2011-03-03Removing optimized digitalWrite(), digitalRead(), pinMode().David A. Mellis
2011-03-02Re-arranging header files and small fixes to optimized core functions.David A. Mellis
2011-03-01Moving wiring.h contents into Arduino.h.David A. Mellis
2011-03-01Renamed WProgram.h to Arduino.h.David A. Mellis
2011-02-26Removing BYTE keyword (use Serial.write() instead).David A. Mellis
2011-02-22Merge branch 'master' into new-extensionDavid A. Mellis
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-23 02:35:56 +0000