| Age | Commit message (Collapse) | Author |
|---|
|
See #2075
|
|
remember to correct the core size and checksum when pushing the official core
|
|
We'll need to patch avrdude with this new programmer type
https://github.com/platformio/platformio-core/issues/717
|
|
Yun derived (Industrial101, YunMini, LininoOne) and Leonardo Ethernet
|
|
|
|
|
|
Fixes #5539
|
|
|
|
This adds the configuration needed to support JTAGICE3.
|
|
|
|
|
|
Arduino AVR Boards 1.6.11 added the {upload.verify} property to the tools.avrdude.upload recipe and {program.verify} to the tools.avrdude.program recipe to support the File > Preferences > Verify code after upload setting.
In Arduino IDE versions 1.6.8 and previous upload.verify is set to true or false depending on the preferences setting which causes Upload to an AVR board with Arduino IDE 1.6.8 or older and Arduino AVR Boards 1.6.11 or newer to generate AVRDUDE commands like:
avrdude -CC:\Users\per\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino2/etc/avrdude.conf -v true -patmega328p -carduino -PCOM21 -b115200 -D -Uflash:w:C:\Users\per\AppData\Local\Temp\buildece560c1024a4a94b7c3b05be61aa2fc.tmp/sketch_sep28a.ino.hex:i
program.verify is unset, which causes Upload Using Programmer to an AVR board with Arduino IDE 1.6.8 or older and Arduino AVR Boards 1.6.11 or newer to generate AVRDUDE commands like:
avrdude -CC:\Users\per\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino6/etc/avrdude.conf -v {program.verify} -patmega328p -cusbasp -Pusb -Uflash:w:C:\Users\per\AppData\Local\Temp\build77ff2e21c5523c5895e8d065447461cb.tmp/sketch_sep28a.ino.hex:i
AVRDUDE 6.0.1 is able to ignore the spurious item in the command and successfully upload but when used with AVRDUDE 6.3.0 this causes upload to fail:
avrdude: no programmer has been specified on the command line or the config file
Specify a programmer using the -c option and try again
This means that Arduino AVR Boards 1.6.12 and 1.6.14 are not backwards compatible with Arduino IDE 1.6.8 and previous.
Setting a default empty value for the upload.verify and program.verify properties in platform.txt causes Arduino IDE 1.6.8 and older to generate an AVRDUDE command identical to that generated with Arduino AVR Boards 1.6.10 or older(meaning that, as previously, the preferences setting has no effect):
avrdude -CC:\Users\per\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino2/etc/avrdude.conf -v -patmega328p -carduino -PCOM21 -b115200 -D -Uflash:w:C:\Users\per\AppData\Local\Temp\buildece560c1024a4a94b7c3b05be61aa2fc.tmp/sketch_sep28a.ino.hex:i
Arduino IDE 1.6.9 and newer overrides the default values of upload.verify and program.verify, therefore this change has no effect on the AVRDUDE command generated and verification is controlled by the preferences setting as usual.
Tested back to Arduino IDE 1.6.2, the oldest IDE version that supports Boards Manager updates.
|
|
|
|
|
|
`toFloat` internally converts into double and then truncates into a
float, so why not add a method to return the double?
|
|
Add all analog references supported by the ATtinyX5 series
|
|
|
|
I was compiling with -Werror and this little error popped up
|
|
|
|
Also includes Micros per https://www.arduino.cc/en/Reference/SoftwareSerial
|
|
Previously, during the build, the full package_index.json was downloaded
and distributed with the Arduino IDE.
This lead to a situation where it was difficult to test new AVR cores
before publishing them to the public package_index.json.
Now the bundled AVR core is specificed in the file:
`hardware/package_index_bundled.json`
this index is loaded from the IDE at startup and the package_index.json
is overlayed on it.
This should also solve part of #5143 (Repeatable builds and snapshots of
package/library indexes)
|
|
This must be made together with the release of AVR core 1.6.13.
This reverts commit d20e60862344eb864ab384abe3d85f55c1845f3f.
|
|
|
|
|
|
|
|
|
|
This avoid build errors on old libraries. It may possibly be removed in
the future after a period of transition.
|
|
[AVR][USB] Configurable USB_VERSION value via define
|
|
Send an USB remote wakeup if data need to be written
|
|
To allow sketches to override value as per #58.
|
|
|
|
Speed and size improvement in Print::printFloat()
|
|
Add getTimeout accessor method.
|
|
https://github.com/sandeepmistry/Arduino
|
|
On Linux, setting autosuspend_delay_ms to N and control to auto allows the host pc to suspend the peripheral. Some Linux distro (Ubuntu, Mint) apply this behaviour by default.
If the sketch's prints where less frequent than N milliseconds the sketch prints would never arrive.
This patch allows sending a remote wakeup event to unsuspend the peripheral and allow the serial prints to be received.
|
|
|
|
to allow WebUSB development, provide a way to change the USB_VERSION reported
using an additional core.
The additional (webUSB) core will survive IDE and AVR core updates
|
|
|
|
Subtract one from USB_EP_SIZE in USB_SendSpace
|
|
SAM: Add Serial_::availableForWrite
|
|
Add PIN_* defines to AVR variants
|
|
Port SDA and SCL symbols to SAM
|
|
|
|
|
|
Fixes that more complex methods (like Stream::print(float)) do not work properly.
Without this fix, Wire.print(1.01f); results in '1' because Print::printFloat(double, uint8_t) performs multiple print() and therefore twi_transmit calls. Also Wire.println("Heyho"); results only in a newline character.
|
|
In an excess of confidence, these defines were added to Leonardo's variant.h
3rd party boards sometimes avoid inheriting this variant but they still define USBCON, thus breaking the build
|
|
|
|
|
|
|
|
|
