aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-22Added patch to bootloader for Mega2560. (Mark Sproul)Cristian Maglie
See #181 #392 #505 #543 #544
2012-12-16Add trivial new[] and delete[] operators (Justin R. Cutler)Cristian Maglie
Fixes #73 Fixes #883
2012-12-16Fixed malloc() bug. (Paul Stoffregen)Cristian Maglie
Fixes #857
2012-12-10Fixed some firmware filenamesCristian Maglie
2012-12-07Added Esplora precompiled firmwareCristian Maglie
2012-12-07Added support for Arduino EsploraCristian Maglie
2012-11-30Updated firmware for atmega8 for new avr-gcc versions.Cristian Maglie
fixes #153 fixes #1122
2012-11-30Saved old Leonardo and Micro production firmware.Cristian Maglie
Rebuilt firmware for Micro. Added pre-loaded Blink to new firmwares.
2012-11-30Improved Leonardo bootloaderKristian Lauszus
The power-on reset detection didn't work properly, but has now been fixed
2012-11-30Leonardo pins_arduino.h fixes (jrcutler)Cristian Maglie
fixes #915
2012-11-29Clarifying comment.David A. Mellis
2012-11-29Moving TXCO definition into HardwareSerial.cpp from HardwareSerial.h.David A. Mellis
Otherwise, you get an error when compiling for processors with no serial port because the header file is always compiled. See, for an example of the problem: https://github.com/damellis/attiny/issues/8
2012-11-28Issue #9: Connection dies after a few secondsmlf
Issue 1024: TCP connections die after few seconds of inactivity
2012-11-25Extended digital_pin_to_timer_PGM array in variants/leonardo/pins_arduino.h ↵Cristian Maglie
to include analog pins (fixed #1129)
2012-11-23Caterina changes to support Micro. includes newly rebuilt version of the ↵Zachary Eveland
bootloader merged with Blink produced using 1.0.2
2012-11-02Updating Micro bootloader firmware.David A. Mellis
2012-11-02HardwareSerial: change byte to uint8_t (since byte definition isn't present).David A. Mellis
2012-11-01Adding LilyPad Arduino USB.David A. Mellis
2012-10-27Adding Micro.David A. Mellis
2012-10-18Updating USB core to work at 8 MHz (different PLLCSR value).David A. Mellis
2012-10-09Adding ATmega644P check to ATmega1284P check.David A. Mellis
2012-09-13Merge branch 'master' of ../wifishieldDavid A. Mellis
2012-09-13Moving into firmwares directory.David A. Mellis
2012-09-13Moving ATmegaXXU2 firmwares into subdirectory.David A. Mellis
2012-09-13Moving ATmega32U4 Timer 2 #undef's to Leonardo pins_arduino.h file.David A. Mellis
2012-09-13Merge pull request #102 from sgk/leonardoToneDavid A. Mellis
Fix for tone() on Leonardo.
2012-09-13Avoid serial buffer overrun on leonardoPeter Van Hoyweghen
2012-08-30Changing setting of the UMSELn bits (for UART mode) and serial config values.David A. Mellis
Before, the UMSELn1 bit was being to set to 1, putting the UART into a reserved mode. Now, we only set the high (0x80) bit to 1 for the ATmega8, which is needed to access UCSRnC (whose i/o address is shared with UBRRH). Also, no longer bitwise-or the new config with the existing register value, because we're actually configuring all the settings in the register. (We're not using UCPOL, but it's supposed to be 0 in asynchronous mode.)
2012-08-30Renaming serial config constants to, e.g., SERIAL_8N1.David A. Mellis
2012-08-30Merge pull request #109 from Alarus/masterDavid A. Mellis
Serial.begin() parameter to set data bits, parity, stop bits.
2012-08-30Fixing Serial.flush() breakage on Leonardo (WestFW).David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=1020
2012-08-29Fixing ATmega8 breakage from flush() change. (WestFW)David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=1019
2012-08-29Adding overloads so Serial.write(0) works.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=1006
2012-08-28Serial.flush() waits for last character to be transmitted (michele.mazzucchi)David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=871
2012-08-16Fix issue 866Adam Dunlap
Fix issue 866 by adding a const qualifier to what the F macro casts to.
2012-08-14Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
New Serial.begin(baud, config);
2012-08-14Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
New Serial.begin(baud, config);
2012-08-14Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
New Serial.begin(baud, config);
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-08Fix for tone() on Leonardo.Shigeru KANEMOTO
2012-07-15Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560.David A. Mellis
It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload). http://code.google.com/p/arduino/issues/detail?id=806
2012-06-28Print "ovf" if float to be printed doesn't fit in a long.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=967
2012-06-23Print "inf" for infinite floating point numbers (using isinf()).David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=961
2012-06-14Adding write(str) and write(buf, size) for USB CDC.David A. Mellis
So that they work on the Leonardo. http://code.google.com/p/arduino/issues/detail?id=958
2012-06-04Printing NaN values as "nan" in printFloat().David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=946
2012-06-03Check for NULL pointer in Print.write().David A. Mellis
Otherwise, trying to print(NULL) or write(NULL) could print a random character. http://code.google.com/p/arduino/issues/detail?id=941
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 03:36:05 +0000