aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.cppAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12Update hardware/arduino/cores/arduino/HardwareSerial.hAlarus
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-05-21Merge remote-tracking branch 'upstream/master'David A. Mellis
2012-05-20Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo.David A. Mellis
2012-05-19added pin change interrupt defines for Leonardo. fix for broken software ↵Zach Eveland
serial on Leonardo
2012-05-16Adding readString() and readStringUntil() to Stream (Adrian McEwen).David A. Mellis
This isn't necessarily a particularly efficient implementation (it allocates memory one character at a time and so may lead to fragmentation) but it seems to work. http://code.google.com/p/arduino/issues/detail?id=454
2012-05-15Mouse.isPressed() now checks only for left button by defaultZach Eveland
if no argument is given now checks left button by default to be consistent with press() and release() (thanks, David Mellis)
2012-05-01renamed Leonardo USB_ class to USBDevice_ to be unambiguous. renamed "USB" ↵Zach Eveland
object to "USBDevice" to prevent conflict with USB Host library (thanks Massimo)
2012-04-25changed PID values for Leonardo bootloader and sketchZach Eveland
done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-19bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried)Zach Eveland
was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed.
2012-04-19bugfix for boards with a timer 4 but no channel DZach Eveland
compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega
2012-04-11merged Caterina with BlinkZach Eveland
2012-04-11fixed logic bug in Caterina that could stop the bootloader from entering ↵Zach Eveland
self-programming mode
2012-04-09Micro I hardly knew yeZach Eveland
2012-04-09Micro and Leonardo bootloaders for distribution are now merged with Blink sketchZach Eveland
2012-04-09sketch USB VID and PID values are passed in from boards.txt at compile time ↵Zach Eveland
now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt
2012-04-09PID and VID are no longer hard-coded in bootloader. instead they are passed ↵Zach Eveland
in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo
2012-04-06Revert "Revert "added a short delay and comment to boolean operator in CDC""Zach Eveland
This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5.
2012-04-06Revert "added a short delay and comment to boolean operator in CDC"Federico Vanzati
This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd.
2012-04-03added a short delay and comment to boolean operator in CDCZach Eveland
Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems.
2012-04-01added Boolean operators to HardwareSerial and CDC to test whether the port ↵Zach Eveland
is ready to send data. Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true.
2012-03-28fixed logic error in Keyboard.release() - now removes every occurrence of a ↵Zach Eveland
key if it's present more than once
2012-03-28removed horrible multi-key Keyboard.press() and Keyboard.release() methodsZach Eveland
Saves 924 bytes of Flash
2012-03-28eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() ↵Zach Eveland
(David Mellis). Also edit KeyboardReprogram example which was the only example using type()
2012-03-26added methods to Keyboard to handle multiple simultaneous key presses or ↵Zach Eveland
releases (up to six each)
2012-03-26Keyboard.type() now just presses and releases the key indicated - doesn't ↵Zach Eveland
releaseAll()
2012-03-26added stub methods for begin() and end() to Mouse and KeyboardZach Eveland
2012-03-24Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloaderZach Eveland
2012-03-15Putting ArduinoISP back to 19200 baud.David A. Mellis
From 9600. And lowering the delay in the heartbeat from 40 to 20, which seems to fix things again.
2012-03-14reduced delay before starting the Leonardo bootloaderZach Eveland
Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening.
2012-03-14bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.Zach Eveland
Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?
2012-03-14changed Caterina timeout after self-programming to 500 ms (from 250 ms)Zach Eveland
attempt to fix bug reported by Dave Mellis: "avrdude: ser_close(): can’t reset attributes for device: Invalid argument" is thrown after attempting an upload in the IDE (though the upload seems to be successful)
2012-03-08give Leonardo bootloader 250 ms to finish housekeeping before leaving ↵Zach Eveland
self-programming mode Earlier approach had bootloader end as soon as it was told to. On Linux this caused problems with avrdude because the microcontroller never had a chance to send an acknowledgement.
2012-03-08removed old version of Leonardo's caterina bootloader, replaced with ↵Zach Eveland
LUFA-based caterina
2012-03-07Fix for some strange behaviours during board resetCristian Maglie
2012-03-03Added Keyboard support for all modifier and all common non-printing keys.Zach Eveland
2012-03-03Removed support for key mapping in Keyboard.Zach Eveland
Was no longer being used and would be damn near impossible to support with the new scheme for handling modifiers and non-printing keyboard characters.
2012-03-03added Keyboard methods press(), release(), and releaseAll()Zach Eveland
Changes mean that a single, persistent key report must be used so keys can be added or removed. Also reimplemented type() using the new methods.
2012-03-03Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloaderZach Eveland
Conflicts: .gitignore
2012-03-03fixed minor compilation warnings for LeonardoZach Eveland
2012-03-02Small changes for the ATmega1284.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=736
2012-03-01reduced Caterina timeout to 8 seconds from 16Zach Eveland
2012-03-01changed auto-reset logic for Leonardo. only do WDT manipulation if the port ↵Zach Eveland
is opened at 1200 bps. (Dave Mellis)
2012-03-01Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloaderZach Eveland
2012-02-29Switching Mini w/ ATmega328 upload protocol from stk500 to arduino.David A. Mellis
2012-02-27Autoreset 1200 bps fix.Cristian Maglie
2012-02-22shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. ↵Zach Eveland
Reset into bootloader is much snappier.
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 21:23:12 +0000