| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2012-04-19 | bugfix for boards with a timer 4 but no channel D | Zach Eveland | |
| compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega | |||
| 2012-04-11 | merged Caterina with Blink | Zach Eveland | |
| 2012-04-11 | fixed logic bug in Caterina that could stop the bootloader from entering ↵ | Zach Eveland | |
| self-programming mode | |||
| 2012-04-09 | Micro I hardly knew ye | Zach Eveland | |
| 2012-04-09 | Micro and Leonardo bootloaders for distribution are now merged with Blink sketch | Zach Eveland | |
| 2012-04-09 | sketch USB VID and PID values are passed in from boards.txt at compile time ↵ | Zach Eveland | |
| now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt | |||
| 2012-04-09 | PID and VID are no longer hard-coded in bootloader. instead they are passed ↵ | Zach Eveland | |
| in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo | |||
| 2012-04-06 | Revert "Revert "added a short delay and comment to boolean operator in CDC"" | Zach Eveland | |
| This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5. | |||
| 2012-04-06 | Revert "added a short delay and comment to boolean operator in CDC" | Federico Vanzati | |
| This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd. | |||
| 2012-04-03 | added a short delay and comment to boolean operator in CDC | Zach Eveland | |
| Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems. | |||
| 2012-04-01 | added Boolean operators to HardwareSerial and CDC to test whether the port ↵ | Zach Eveland | |
| is ready to send data. Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true. | |||
| 2012-03-28 | fixed logic error in Keyboard.release() - now removes every occurrence of a ↵ | Zach Eveland | |
| key if it's present more than once | |||
| 2012-03-28 | removed horrible multi-key Keyboard.press() and Keyboard.release() methods | Zach Eveland | |
| Saves 924 bytes of Flash | |||
| 2012-03-28 | eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() ↵ | Zach Eveland | |
| (David Mellis). Also edit KeyboardReprogram example which was the only example using type() | |||
| 2012-03-26 | added methods to Keyboard to handle multiple simultaneous key presses or ↵ | Zach Eveland | |
| releases (up to six each) | |||
| 2012-03-26 | Keyboard.type() now just presses and releases the key indicated - doesn't ↵ | Zach Eveland | |
| releaseAll() | |||
| 2012-03-26 | added stub methods for begin() and end() to Mouse and Keyboard | Zach Eveland | |
| 2012-03-24 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| 2012-03-15 | Putting ArduinoISP back to 19200 baud. | David A. Mellis | |
| From 9600. And lowering the delay in the heartbeat from 40 to 20, which seems to fix things again. | |||
| 2012-03-14 | reduced delay before starting the Leonardo bootloader | Zach Eveland | |
| Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening. | |||
| 2012-03-14 | bugfix for Caterina not starting sketch if "verify upload" turned off in IDE. | Zach Eveland | |
| Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it? | |||
| 2012-03-14 | changed Caterina timeout after self-programming to 500 ms (from 250 ms) | Zach Eveland | |
| attempt to fix bug reported by Dave Mellis: "avrdude: ser_close(): can’t reset attributes for device: Invalid argument" is thrown after attempting an upload in the IDE (though the upload seems to be successful) | |||
| 2012-03-08 | give Leonardo bootloader 250 ms to finish housekeeping before leaving ↵ | Zach Eveland | |
| self-programming mode Earlier approach had bootloader end as soon as it was told to. On Linux this caused problems with avrdude because the microcontroller never had a chance to send an acknowledgement. | |||
| 2012-03-08 | removed old version of Leonardo's caterina bootloader, replaced with ↵ | Zach Eveland | |
| LUFA-based caterina | |||
| 2012-03-07 | Fix for some strange behaviours during board reset | Cristian Maglie | |
| 2012-03-03 | Added Keyboard support for all modifier and all common non-printing keys. | Zach Eveland | |
| 2012-03-03 | Removed support for key mapping in Keyboard. | Zach Eveland | |
| Was no longer being used and would be damn near impossible to support with the new scheme for handling modifiers and non-printing keyboard characters. | |||
| 2012-03-03 | added Keyboard methods press(), release(), and releaseAll() | Zach Eveland | |
| Changes mean that a single, persistent key report must be used so keys can be added or removed. Also reimplemented type() using the new methods. | |||
| 2012-03-03 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| Conflicts: .gitignore | |||
| 2012-03-03 | fixed minor compilation warnings for Leonardo | Zach Eveland | |
| 2012-03-02 | Small changes for the ATmega1284. | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=736 | |||
| 2012-03-01 | reduced Caterina timeout to 8 seconds from 16 | Zach Eveland | |
| 2012-03-01 | changed auto-reset logic for Leonardo. only do WDT manipulation if the port ↵ | Zach Eveland | |
| is opened at 1200 bps. (Dave Mellis) | |||
| 2012-03-01 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| 2012-02-29 | Switching Mini w/ ATmega328 upload protocol from stk500 to arduino. | David A. Mellis | |
| 2012-02-27 | Autoreset 1200 bps fix. | Cristian Maglie | |
| 2012-02-22 | shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. ↵ | Zach Eveland | |
| Reset into bootloader is much snappier. | |||
| 2012-02-22 | Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader | Zach Eveland | |
| 2012-02-14 | Leonardo now checks whether bootloader should be run after a WDT event. | Zach Eveland | |
| Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch. Test in a sketch by adding to setup(): wdt_enable(WDTO_2S); Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader). Had to cut out unused descriptor code to make the bootloader still fit in 4k. | |||
| 2012-02-14 | Changed Leonardo fuses to select longer clock startup time. | Zach Eveland | |
| Done with the aim of discriminating more reliably between reset sources. | |||
| 2012-02-14 | Leonardo bootloader jumps straight to sketch for a power-on reset. | Zach Eveland | |
| Disconnect programmer after burning bootloader to get the full effect. ICSP and JTAG programmers do a hardware reset after any reset condition, confusing the firmware a little. | |||
| 2012-02-13 | Leonardo auto-reset-and-upload changes for Windows (explanation below) | Zach Eveland | |
| On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated. Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared. | |||
| 2012-02-13 | changed Leonardo bootloader and sketch PID values again (now 0x0701 for ↵ | Zach Eveland | |
| bootloader, 0x0801 for sketch) | |||
| 2012-02-12 | prog_char -> char PROGMEM in Print.cpp | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=795 | |||
| 2012-02-08 | adjusting descriptors - trying to prevent sketch and bootloader from ↵ | Zach Eveland | |
| grabbing different COM numbers on Windows | |||
| 2012-02-07 | changed Caterina descriptors - Arduino LLC VID, new PID, manufacturer ↵ | Zach Eveland | |
| string, and serial number | |||
| 2012-02-07 | fixed bug in Caterina which caused some programming instructions to fail | Zach Eveland | |
| Timer 1 interrupts were trashing self-programming timing. Now disable Timer 1 compare match before doing Flash tasks and reenable afterward. | |||
| 2012-02-06 | increased Leonardo bootloader timeout to 16 seconds | Zach Eveland | |
| 2012-02-03 | proper bootloader timeout and LED control in Leonardo bootloader | Zach Eveland | |
| 2012-02-03 | fixed starting Leonardo bootloader from sketch | Zach Eveland | |
| AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms | |||
 |
index : arduino-avr-xinput | |
| A fork of Dmadison's Xinput Arduino avr core with a package.json |
| aboutsummaryrefslogtreecommitdiff |