| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2012-12-10 | Fixed some firmware filenames | Cristian Maglie | |
| 2012-12-07 | Added Esplora precompiled firmware | Cristian Maglie | |
| 2012-12-07 | Added support for Arduino Esplora | Cristian Maglie | |
| 2012-11-30 | Updated firmware for atmega8 for new avr-gcc versions. | Cristian Maglie | |
| fixes #153 fixes #1122 | |||
| 2012-11-30 | Saved old Leonardo and Micro production firmware. | Cristian Maglie | |
| Rebuilt firmware for Micro. Added pre-loaded Blink to new firmwares. | |||
| 2012-11-30 | Improved Leonardo bootloader | Kristian Lauszus | |
| The power-on reset detection didn't work properly, but has now been fixed | |||
| 2012-11-30 | Leonardo pins_arduino.h fixes (jrcutler) | Cristian Maglie | |
| fixes #915 | |||
| 2012-11-29 | Clarifying comment. | David A. Mellis | |
| 2012-11-29 | Moving TXCO definition into HardwareSerial.cpp from HardwareSerial.h. | David A. Mellis | |
| Otherwise, you get an error when compiling for processors with no serial port because the header file is always compiled. See, for an example of the problem: https://github.com/damellis/attiny/issues/8 | |||
| 2012-11-28 | Issue #9: Connection dies after a few seconds | mlf | |
| Issue 1024: TCP connections die after few seconds of inactivity | |||
| 2012-11-25 | Extended digital_pin_to_timer_PGM array in variants/leonardo/pins_arduino.h ↵ | Cristian Maglie | |
| to include analog pins (fixed #1129) | |||
| 2012-11-23 | Caterina changes to support Micro. includes newly rebuilt version of the ↵ | Zachary Eveland | |
| bootloader merged with Blink produced using 1.0.2 | |||
| 2012-11-02 | Updating Micro bootloader firmware. | David A. Mellis | |
| 2012-11-02 | HardwareSerial: change byte to uint8_t (since byte definition isn't present). | David A. Mellis | |
| 2012-11-01 | Adding LilyPad Arduino USB. | David A. Mellis | |
| 2012-10-27 | Adding Micro. | David A. Mellis | |
| 2012-10-18 | Updating USB core to work at 8 MHz (different PLLCSR value). | David A. Mellis | |
| 2012-10-09 | Adding ATmega644P check to ATmega1284P check. | David A. Mellis | |
| 2012-09-13 | Merge branch 'master' of ../wifishield | David A. Mellis | |
| 2012-09-13 | Moving into firmwares directory. | David A. Mellis | |
| 2012-09-13 | Moving ATmegaXXU2 firmwares into subdirectory. | David A. Mellis | |
| 2012-09-13 | Moving ATmega32U4 Timer 2 #undef's to Leonardo pins_arduino.h file. | David A. Mellis | |
| 2012-09-13 | Merge pull request #102 from sgk/leonardoTone | David A. Mellis | |
| Fix for tone() on Leonardo. | |||
| 2012-09-13 | Avoid serial buffer overrun on leonardo | Peter Van Hoyweghen | |
| 2012-08-30 | Changing setting of the UMSELn bits (for UART mode) and serial config values. | David A. Mellis | |
| Before, the UMSELn1 bit was being to set to 1, putting the UART into a reserved mode. Now, we only set the high (0x80) bit to 1 for the ATmega8, which is needed to access UCSRnC (whose i/o address is shared with UBRRH). Also, no longer bitwise-or the new config with the existing register value, because we're actually configuring all the settings in the register. (We're not using UCPOL, but it's supposed to be 0 in asynchronous mode.) | |||
| 2012-08-30 | Renaming serial config constants to, e.g., SERIAL_8N1. | David A. Mellis | |
| 2012-08-30 | Merge pull request #109 from Alarus/master | David A. Mellis | |
| Serial.begin() parameter to set data bits, parity, stop bits. | |||
| 2012-08-30 | Fixing Serial.flush() breakage on Leonardo (WestFW). | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=1020 | |||
| 2012-08-29 | Fixing ATmega8 breakage from flush() change. (WestFW) | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=1019 | |||
| 2012-08-29 | Adding overloads so Serial.write(0) works. | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=1006 | |||
| 2012-08-28 | Serial.flush() waits for last character to be transmitted (michele.mazzucchi) | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=871 | |||
| 2012-08-16 | Fix issue 866 | Adam Dunlap | |
| Fix issue 866 by adding a const qualifier to what the F macro casts to. | |||
| 2012-08-14 | Update hardware/arduino/cores/arduino/HardwareSerial.cpp | Alarus | |
| New Serial.begin(baud, config); | |||
| 2012-08-14 | Update hardware/arduino/cores/arduino/HardwareSerial.h | Alarus | |
| New Serial.begin(baud, config); | |||
| 2012-08-14 | Update hardware/arduino/cores/arduino/HardwareSerial.cpp | Alarus | |
| New Serial.begin(baud, config); | |||
| 2012-08-12 | Update hardware/arduino/cores/arduino/HardwareSerial.cpp | Alarus | |
| Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits. | |||
| 2012-08-12 | Update hardware/arduino/cores/arduino/HardwareSerial.cpp | Alarus | |
| Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits. | |||
| 2012-08-12 | Update hardware/arduino/cores/arduino/HardwareSerial.cpp | Alarus | |
| Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits. | |||
| 2012-08-12 | Update hardware/arduino/cores/arduino/HardwareSerial.h | Alarus | |
| Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits. | |||
| 2012-08-12 | Update hardware/arduino/cores/arduino/HardwareSerial.h | Alarus | |
| Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits. | |||
| 2012-08-08 | Fix for tone() on Leonardo. | Shigeru KANEMOTO | |
| 2012-07-15 | Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560. | David A. Mellis | |
| It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload). http://code.google.com/p/arduino/issues/detail?id=806 | |||
| 2012-06-28 | Print "ovf" if float to be printed doesn't fit in a long. | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=967 | |||
| 2012-06-23 | Print "inf" for infinite floating point numbers (using isinf()). | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=961 | |||
| 2012-06-14 | Adding write(str) and write(buf, size) for USB CDC. | David A. Mellis | |
| So that they work on the Leonardo. http://code.google.com/p/arduino/issues/detail?id=958 | |||
| 2012-06-04 | Printing NaN values as "nan" in printFloat(). | David A. Mellis | |
| http://code.google.com/p/arduino/issues/detail?id=946 | |||
| 2012-06-03 | Check for NULL pointer in Print.write(). | David A. Mellis | |
| Otherwise, trying to print(NULL) or write(NULL) could print a random character. http://code.google.com/p/arduino/issues/detail?id=941 | |||
| 2012-06-02 | Added support for interrupt on INT2 and INT3 on the Leonardo | Kristian Lauszus | |
| 2012-05-21 | Merge remote-tracking branch 'upstream/master' | David A. Mellis | |
| 2012-05-20 | Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo. | David A. Mellis | |
 |
index : arduino-avr-xinput | |
| A fork of Dmadison's Xinput Arduino avr core with a package.json |
| aboutsummaryrefslogtreecommitdiff |