arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2012-11-30	Leonardo pins_arduino.h fixes (jrcutler)	Cristian Maglie
	fixes #915
2012-11-29	Clarifying comment.	David A. Mellis

2012-11-29	Moving TXCO definition into HardwareSerial.cpp from HardwareSerial.h.	David A. Mellis
	Otherwise, you get an error when compiling for processors with no serial port because the header file is always compiled. See, for an example of the problem: https://github.com/damellis/attiny/issues/8
2012-11-28	Issue #9: Connection dies after a few seconds	mlf
	Issue 1024: TCP connections die after few seconds of inactivity
2012-11-25	Extended digital_pin_to_timer_PGM array in variants/leonardo/pins_arduino.h ↵	Cristian Maglie
	to include analog pins (fixed #1129)
2012-11-23	Caterina changes to support Micro. includes newly rebuilt version of the ↵	Zachary Eveland
	bootloader merged with Blink produced using 1.0.2
2012-11-02	Updating Micro bootloader firmware.	David A. Mellis

2012-11-02	HardwareSerial: change byte to uint8_t (since byte definition isn't present).	David A. Mellis

2012-11-01	Adding LilyPad Arduino USB.	David A. Mellis

2012-10-27	Adding Micro.	David A. Mellis

2012-10-18	Updating USB core to work at 8 MHz (different PLLCSR value).	David A. Mellis

2012-10-09	Adding ATmega644P check to ATmega1284P check.	David A. Mellis

2012-09-13	Merge branch 'master' of ../wifishield	David A. Mellis

2012-09-13	Moving into firmwares directory.	David A. Mellis

2012-09-13	Moving ATmegaXXU2 firmwares into subdirectory.	David A. Mellis

2012-09-13	Moving ATmega32U4 Timer 2 #undef's to Leonardo pins_arduino.h file.	David A. Mellis

2012-09-13	Merge pull request #102 from sgk/leonardoTone	David A. Mellis
	Fix for tone() on Leonardo.
2012-09-13	Avoid serial buffer overrun on leonardo	Peter Van Hoyweghen

2012-08-30	Changing setting of the UMSELn bits (for UART mode) and serial config values.	David A. Mellis
	Before, the UMSELn1 bit was being to set to 1, putting the UART into a reserved mode. Now, we only set the high (0x80) bit to 1 for the ATmega8, which is needed to access UCSRnC (whose i/o address is shared with UBRRH). Also, no longer bitwise-or the new config with the existing register value, because we're actually configuring all the settings in the register. (We're not using UCPOL, but it's supposed to be 0 in asynchronous mode.)
2012-08-30	Renaming serial config constants to, e.g., SERIAL_8N1.	David A. Mellis

2012-08-30	Merge pull request #109 from Alarus/master	David A. Mellis
	Serial.begin() parameter to set data bits, parity, stop bits.
2012-08-30	Fixing Serial.flush() breakage on Leonardo (WestFW).	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=1020
2012-08-29	Fixing ATmega8 breakage from flush() change. (WestFW)	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=1019
2012-08-29	Adding overloads so Serial.write(0) works.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=1006
2012-08-28	Serial.flush() waits for last character to be transmitted (michele.mazzucchi)	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=871
2012-08-16	Fix issue 866	Adam Dunlap
	Fix issue 866 by adding a const qualifier to what the F macro casts to.
2012-08-14	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	New Serial.begin(baud, config);
2012-08-14	Update hardware/arduino/cores/arduino/HardwareSerial.h	Alarus
	New Serial.begin(baud, config);
2012-08-14	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	New Serial.begin(baud, config);
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.cpp	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.h	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12	Update hardware/arduino/cores/arduino/HardwareSerial.h	Alarus
	Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-08	Fix for tone() on Leonardo.	Shigeru KANEMOTO

2012-07-15	Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560.	David A. Mellis
	It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload). http://code.google.com/p/arduino/issues/detail?id=806
2012-06-28	Print "ovf" if float to be printed doesn't fit in a long.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=967
2012-06-23	Print "inf" for infinite floating point numbers (using isinf()).	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=961
2012-06-14	Adding write(str) and write(buf, size) for USB CDC.	David A. Mellis
	So that they work on the Leonardo. http://code.google.com/p/arduino/issues/detail?id=958
2012-06-04	Printing NaN values as "nan" in printFloat().	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=946
2012-06-03	Check for NULL pointer in Print.write().	David A. Mellis
	Otherwise, trying to print(NULL) or write(NULL) could print a random character. http://code.google.com/p/arduino/issues/detail?id=941
2012-06-02	Added support for interrupt on INT2 and INT3 on the Leonardo	Kristian Lauszus

2012-05-21	Merge remote-tracking branch 'upstream/master'	David A. Mellis

2012-05-20	Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo.	David A. Mellis

2012-05-19	added pin change interrupt defines for Leonardo. fix for broken software ↵	Zach Eveland
	serial on Leonardo
2012-05-16	Adding readString() and readStringUntil() to Stream (Adrian McEwen).	David A. Mellis
	This isn't necessarily a particularly efficient implementation (it allocates memory one character at a time and so may lead to fragmentation) but it seems to work. http://code.google.com/p/arduino/issues/detail?id=454
2012-05-15	Mouse.isPressed() now checks only for left button by default	Zach Eveland
	if no argument is given now checks left button by default to be consistent with press() and release() (thanks, David Mellis)
2012-05-01	renamed Leonardo USB_ class to USBDevice_ to be unambiguous. renamed "USB" ↵	Zach Eveland
	object to "USBDevice" to prevent conflict with USB Host library (thanks Massimo)
2012-04-25	changed PID values for Leonardo bootloader and sketch	Zach Eveland
	done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-19	bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried)	Zach Eveland
	was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed.