diff options
Diffstat (limited to 'variants/standard')
| -rw-r--r-- | variants/standard/pins_arduino.h | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/variants/standard/pins_arduino.h b/variants/standard/pins_arduino.h new file mode 100644 index 0000000..3999d1f --- /dev/null +++ b/variants/standard/pins_arduino.h @@ -0,0 +1,218 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include <avr/pgmspace.h> + +#define NUM_DIGITAL_PINS 20 +#define NUM_ANALOG_INPUTS 6 +#define analogInputToDigitalPin(p) ((p < 6) ? (p) + 14 : -1) + +#if defined(__AVR_ATmega8__) +#define digitalPinHasPWM(p) ((p) == 9 || (p) == 10 || (p) == 11) +#else +#define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11) +#endif + +const static uint8_t SS = 10; +const static uint8_t MOSI = 11; +const static uint8_t MISO = 12; +const static uint8_t SCK = 13; + +const static uint8_t SDA = 18; +const static uint8_t SCL = 19; +const static uint8_t LED = 13; + +const static uint8_t A0 = 14; +const static uint8_t A1 = 15; +const static uint8_t A2 = 16; +const static uint8_t A3 = 17; +const static uint8_t A4 = 18; +const static uint8_t A5 = 19; +const static uint8_t A6 = 20; +const static uint8_t A7 = 21; + +#define digitalPinToPCICR(p) (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1)) +#define digitalPinToPCMSK(p) (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0)))) +#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA8 & 168 / ARDUINO +// +// +-\/-+ +// PC6 1| |28 PC5 (AI 5) +// (D 0) PD0 2| |27 PC4 (AI 4) +// (D 1) PD1 3| |26 PC3 (AI 3) +// (D 2) PD2 4| |25 PC2 (AI 2) +// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) +// (D 4) PD4 6| |23 PC0 (AI 0) +// VCC 7| |22 GND +// GND 8| |21 AREF +// PB6 9| |20 AVCC +// PB7 10| |19 PB5 (D 13) +// PWM+ (D 5) PD5 11| |18 PB4 (D 12) +// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM +// (D 7) PD7 13| |16 PB2 (D 10) PWM +// (D 8) PB0 14| |15 PB1 (D 9) PWM +// +----+ +// +// (PWM+ indicates the additional PWM pins on the ATmega168.) + +// ATMEL ATMEGA1280 / ARDUINO +// +// 0-7 PE0-PE7 works +// 8-13 PB0-PB5 works +// 14-21 PA0-PA7 works +// 22-29 PH0-PH7 works +// 30-35 PG5-PG0 works +// 36-43 PC7-PC0 works +// 44-51 PJ7-PJ0 works +// 52-59 PL7-PL0 works +// 60-67 PD7-PD0 works +// A0-A7 PF0-PF7 +// A8-A15 PK0-PK7 + + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, /* 0 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PB, /* 8 */ + PB, + PB, + PB, + PB, + PB, + PC, /* 14 */ + PC, + PC, + PC, + PC, + PC, +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(0), /* 0, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(0), /* 14, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, /* 0 - port D */ + NOT_ON_TIMER, + NOT_ON_TIMER, + // on the ATmega168, digital pin 3 has hardware pwm +#if defined(__AVR_ATmega8__) + NOT_ON_TIMER, +#else + TIMER2B, +#endif + NOT_ON_TIMER, + // on the ATmega168, digital pins 5 and 6 have hardware pwm +#if defined(__AVR_ATmega8__) + NOT_ON_TIMER, + NOT_ON_TIMER, +#else + TIMER0B, + TIMER0A, +#endif + NOT_ON_TIMER, + NOT_ON_TIMER, /* 8 - port B */ + TIMER1A, + TIMER1B, +#if defined(__AVR_ATmega8__) + TIMER2, +#else + TIMER2A, +#endif + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, /* 14 - port C */ + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +#endif + +#endif
\ No newline at end of file |