diff options
Diffstat (limited to 'targets/arduino/Makefile')
| -rwxr-xr-x | targets/arduino/Makefile | 239 |
1 files changed, 0 insertions, 239 deletions
diff --git a/targets/arduino/Makefile b/targets/arduino/Makefile deleted file mode 100755 index 9290fcc..0000000 --- a/targets/arduino/Makefile +++ /dev/null @@ -1,239 +0,0 @@ -# Arduino makefile -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment (or Java). -# -# The Arduino environment does preliminary processing on a sketch before -# compiling it. If you're using this makefile instead, you'll need to do -# a few things differently: -# -# - Give your program's file a .cpp extension (e.g. foo.cpp). -# -# - Put this line at top of your code: #include <WProgram.h> -# -# - Write prototypes for all your functions (or define them before you -# call them). A prototype declares the types of parameters a -# function will take and what type of value it will return. This -# means that you can have a call to a function before the definition -# of the function. A function prototype looks like the first line of -# the function, with a semi-colon at the end. For example: -# int digitalRead(int pin); -# -# - Write a main() function for your program that returns an int, calls -# init() and setup() once (in that order), and then calls loop() -# repeatedly(): -# -# int main() -# { -# init(); -# setup(); -# -# for (;;) -# loop(); -# -# return 0; -# } -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. -# -# 2. Below, modify the line containing "TARGET" to refer to the name of -# of your program's file without an extension (e.g. TARGET = foo). -# -# 3. Modify the line containg "ARDUINO" to point the directory that -# contains the Arduino core (for normal Arduino installations, this -# is the lib/targets/arduino sub-directory). -# -# 4. Modify the line containing "PORT" to refer to the filename -# representing the USB or serial connection to your Arduino board -# (e.g. PORT = /dev/tty.USB0). If the exact name of this file -# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). -# -# 5. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 6. Type "make" and press enter to compile/verify your program. -# -# 7. Type "make upload", reset your Arduino board, and press enter to -# upload your program to the Arduino board. -# -# $Id$ - -PORT = /dev/tty.usbserial* -TARGET = foo -ARDUINO = arduino -SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ -$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ -$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \ -$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c -CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WRandom.cpp -MCU = atmega168 -F_CPU = 16000000 -FORMAT = ihex -UPLOAD_RATE = 19200 - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -DEBUG = stabs - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU) -CXXDEFS = -DF_CPU=$(F_CPU) - -# Place -I options here -CINCS = -I$(ARDUINO) -CXXINCS = -I$(ARDUINO) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -CWARN = -Wall -Wstrict-prototypes -CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) - -CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -lm - - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PROGRAMMER = stk500 -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ - -b $(UPLOAD_RATE) - -# Program settings -CC = avr-gcc -CXX = avr-g++ -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -AR = avr-ar -SIZE = avr-size -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) -ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - -# Default target. -all: build - -build: elf hex - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym - -# Program the device. -upload: $(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - - -coff: $(TARGET).elf - $(COFFCONVERT) -O coff-avr $(TARGET).elf $(TARGET).cof - - -extcoff: $(TARGET).elf - $(COFFCONVERT) -O coff-ext-avr $(TARGET).elf $(TARGET).cof - - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Create a symbol table from ELF output file. -.elf.sym: - $(NM) -n $< > $@ - - -core.a: $(OBJ) - @for i in $(OBJ); do echo $(AR) rcs core.a $$i; $(AR) rcs core.a $$i; done - -# Link: create ELF output file from library. -$(TARGET).elf: core.a - $(CC) $(ALL_CFLAGS) -o $@ $(TARGET).cpp -L. core.a $(LDFLAGS) - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - - -# Target: clean project. -clean: - $(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf \ - $(TARGET).map $(TARGET).sym $(TARGET).lss core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -depend: - if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ - then \ - sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ - $(MAKEFILE).$$$$ && \ - $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ - fi - echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ - >> $(MAKEFILE); \ - $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) - -.PHONY: all build elf hex eep lss sym program coff extcoff clean depend |