diff options
Diffstat (limited to 'pins/leonardo')
| -rw-r--r-- | pins/leonardo/pins_arduino.h | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/pins/leonardo/pins_arduino.h b/pins/leonardo/pins_arduino.h deleted file mode 100644 index 79826f0..0000000 --- a/pins/leonardo/pins_arduino.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Map SPI port to 'new' pins D14..D17 -// D14 PB0 RXLED,SS/PCINT0 -// D15 PB1 SCK,PCINT1 -// D16 PB2 MOSI,PCINT2 -// D17 PB3 MISO,PCINT3 -const static uint8_t SS = 14; -const static uint8_t MOSI = 16; -const static uint8_t MISO = 17; -const static uint8_t SCK = 15; - -const static uint8_t A0 = 14; -const static uint8_t A1 = 15; -const static uint8_t A2 = 16; -const static uint8_t A3 = 17; -const static uint8_t A4 = 18; -const static uint8_t A5 = 19; -const static uint8_t A6 = 20; -const static uint8_t A7 = 21; - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA8 & 168 / ARDUINO -// -// +-\/-+ -// PC6 1| |28 PC5 (AI 5) -// (D 0) PD0 2| |27 PC4 (AI 4) -// (D 1) PD1 3| |26 PC3 (AI 3) -// (D 2) PD2 4| |25 PC2 (AI 2) -// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) -// (D 4) PD4 6| |23 PC0 (AI 0) -// VCC 7| |22 GND -// GND 8| |21 AREF -// PB6 9| |20 AVCC -// PB7 10| |19 PB5 (D 13) -// PWM+ (D 5) PD5 11| |18 PB4 (D 12) -// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM -// (D 7) PD7 13| |16 PB2 (D 10) PWM -// (D 8) PB0 14| |15 PB1 (D 9) PWM -// +----+ -// -// (PWM+ indicates the additional PWM pins on the ATmega168.) - -// ATMEL ATMEGA1280 / ARDUINO -// -// 0-7 PE0-PE7 works -// 8-13 PB0-PB5 works -// 14-21 PA0-PA7 works -// 22-29 PH0-PH7 works -// 30-35 PG5-PG0 works -// 36-43 PC7-PC0 works -// 44-51 PJ7-PJ0 works -// 52-59 PL7-PL0 works -// 60-67 PD7-PD0 works -// A0-A7 PF0-PF7 -// A8-A15 PK0-PK7 - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# A7 PD6 FastPWM OC4D/ADC9 -// D6# A8 PD7 FastPWM #OC4D/ADC10 -// D7 PD5 #CTS -// -// D8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC13/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC12/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12# PC6 PWM16 0C3A/#OC4A -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 PF7 ADC7 -// A1 PF6 ADC6 -// A2 PF5 ADC5 -// A3 PF4 ADC4 -// A4 PF1 ADC1 -// A5 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digitial pins -// -// D14 PB0 RXLED,SS/PCINT0 -// D15 PB1 SCK,PCINT1 -// D16 PB2 MOSI,PCINT2 -// D17 PB3 MISO,PCINT3 -// -// TXLED PE6 INT6 -// HWB PE2 HWB - - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[18] = { - PD, /* 0 */ - PD, - PD, - PD, - PD, - PD, - PD, - PD, - - PB, /* 8 */ - PB, - PB, - PB, - - PC, /* 12 */ - PC, /* 13 */ - - PB, /* 14 */ - PB, /* 15 */ - PB, /* 16 */ - PB, /* 17 */ -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[18] = { - _BV(2), /* 0, port D */ - _BV(3), - _BV(1), - _BV(0), - _BV(4), - _BV(6), - _BV(7), - _BV(5), - - _BV(4), /* 8, port B */ - _BV(5), - _BV(6), - _BV(7), - - _BV(6), /* 12 port C */ - _BV(7), - - _BV(0), /* 14, port B */ - _BV(1), - _BV(2), - _BV(3), -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[18] = { - NOT_ON_TIMER, /* 0, port D */ - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, - NOT_ON_TIMER, - NOT_ON_TIMER, // TIMER4D TODO - ZE - Fix this when there's a decision on what to do about these PWM pins - NOT_ON_TIMER, // TIMER4D_NOT TODO - ZE - Complementary output of TIMER4D on Digital Pin 6. Not sure this was intended. - NOT_ON_TIMER, - - NOT_ON_TIMER, /* 8 port B */ - TIMER1A, - TIMER1B, - TIMER0A, - - TIMER3A, /* 12 port C */ - TIMER4A, - - NOT_ON_TIMER, /* 14 port B */ - NOT_ON_TIMER, -}; - -#endif - -#endif
\ No newline at end of file |