diff options
Diffstat (limited to 'libraries')
27 files changed, 2648 insertions, 0 deletions
diff --git a/libraries/EEPROM/EEPROM.cpp b/libraries/EEPROM/EEPROM.cpp new file mode 100644 index 0000000..dfa1deb --- /dev/null +++ b/libraries/EEPROM/EEPROM.cpp @@ -0,0 +1,50 @@ +/* + EEPROM.cpp - EEPROM library + Copyright (c) 2006 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/****************************************************************************** + * Includes + ******************************************************************************/ + +#include <avr/eeprom.h> +#include "Arduino.h" +#include "EEPROM.h" + +/****************************************************************************** + * Definitions + ******************************************************************************/ + +/****************************************************************************** + * Constructors + ******************************************************************************/ + +/****************************************************************************** + * User API + ******************************************************************************/ + +uint8_t EEPROMClass::read(int address) +{ + return eeprom_read_byte((unsigned char *) address); +} + +void EEPROMClass::write(int address, uint8_t value) +{ + eeprom_write_byte((unsigned char *) address, value); +} + +EEPROMClass EEPROM; diff --git a/libraries/EEPROM/EEPROM.h b/libraries/EEPROM/EEPROM.h new file mode 100644 index 0000000..aa2b577 --- /dev/null +++ b/libraries/EEPROM/EEPROM.h @@ -0,0 +1,35 @@ +/* + EEPROM.h - EEPROM library + Copyright (c) 2006 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef EEPROM_h +#define EEPROM_h + +#include <inttypes.h> + +class EEPROMClass +{ + public: + uint8_t read(int); + void write(int, uint8_t); +}; + +extern EEPROMClass EEPROM; + +#endif + diff --git a/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino b/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino new file mode 100644 index 0000000..b18ff2c --- /dev/null +++ b/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino @@ -0,0 +1,23 @@ +/* + * EEPROM Clear + * + * Sets all of the bytes of the EEPROM to 0. + * This example code is in the public domain. + + */ + +#include <EEPROM.h> + +void setup() +{ + // write a 0 to all 512 bytes of the EEPROM + for (int i = 0; i < 512; i++) + EEPROM.write(i, 0); + + // turn the LED on when we're done + digitalWrite(13, HIGH); +} + +void loop() +{ +} diff --git a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino new file mode 100644 index 0000000..ebf79d6 --- /dev/null +++ b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino @@ -0,0 +1,43 @@ +/* + * EEPROM Read + * + * Reads the value of each byte of the EEPROM and prints it + * to the computer. + * This example code is in the public domain. + */ + +#include <EEPROM.h> + +// start reading from the first byte (address 0) of the EEPROM +int address = 0; +byte value; + +void setup() +{ + // initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } +} + +void loop() +{ + // read a byte from the current address of the EEPROM + value = EEPROM.read(address); + + Serial.print(address); + Serial.print("\t"); + Serial.print(value, DEC); + Serial.println(); + + // advance to the next address of the EEPROM + address = address + 1; + + // there are only 512 bytes of EEPROM, from 0 to 511, so if we're + // on address 512, wrap around to address 0 + if (address == 512) + address = 0; + + delay(500); +} diff --git a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino new file mode 100644 index 0000000..c047887 --- /dev/null +++ b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino @@ -0,0 +1,38 @@ +/* + * EEPROM Write + * + * Stores values read from analog input 0 into the EEPROM. + * These values will stay in the EEPROM when the board is + * turned off and may be retrieved later by another sketch. + */ + +#include <EEPROM.h> + +// the current address in the EEPROM (i.e. which byte +// we're going to write to next) +int addr = 0; + +void setup() +{ +} + +void loop() +{ + // need to divide by 4 because analog inputs range from + // 0 to 1023 and each byte of the EEPROM can only hold a + // value from 0 to 255. + int val = analogRead(0) / 4; + + // write the value to the appropriate byte of the EEPROM. + // these values will remain there when the board is + // turned off. + EEPROM.write(addr, val); + + // advance to the next address. there are 512 bytes in + // the EEPROM, so go back to 0 when we hit 512. + addr = addr + 1; + if (addr == 512) + addr = 0; + + delay(100); +} diff --git a/libraries/EEPROM/keywords.txt b/libraries/EEPROM/keywords.txt new file mode 100644 index 0000000..d3218fe --- /dev/null +++ b/libraries/EEPROM/keywords.txt @@ -0,0 +1,18 @@ +####################################### +# Syntax Coloring Map For Ultrasound +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +EEPROM KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/SPI/SPI.cpp b/libraries/SPI/SPI.cpp new file mode 100644 index 0000000..5e48073 --- /dev/null +++ b/libraries/SPI/SPI.cpp @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st> + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#include "pins_arduino.h" +#include "SPI.h" + +SPIClass SPI; + +void SPIClass::begin() { + + // Set SS to high so a connected chip will be "deselected" by default + digitalWrite(SS, HIGH); + + // When the SS pin is set as OUTPUT, it can be used as + // a general purpose output port (it doesn't influence + // SPI operations). + pinMode(SS, OUTPUT); + + // Warning: if the SS pin ever becomes a LOW INPUT then SPI + // automatically switches to Slave, so the data direction of + // the SS pin MUST be kept as OUTPUT. + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); + + // Set direction register for SCK and MOSI pin. + // MISO pin automatically overrides to INPUT. + // By doing this AFTER enabling SPI, we avoid accidentally + // clocking in a single bit since the lines go directly + // from "input" to SPI control. + // http://code.google.com/p/arduino/issues/detail?id=888 + pinMode(SCK, OUTPUT); + pinMode(MOSI, OUTPUT); +} + + +void SPIClass::end() { + SPCR &= ~_BV(SPE); +} + +void SPIClass::setBitOrder(uint8_t bitOrder) +{ + if(bitOrder == LSBFIRST) { + SPCR |= _BV(DORD); + } else { + SPCR &= ~(_BV(DORD)); + } +} + +void SPIClass::setDataMode(uint8_t mode) +{ + SPCR = (SPCR & ~SPI_MODE_MASK) | mode; +} + +void SPIClass::setClockDivider(uint8_t rate) +{ + SPCR = (SPCR & ~SPI_CLOCK_MASK) | (rate & SPI_CLOCK_MASK); + SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((rate >> 2) & SPI_2XCLOCK_MASK); +} + diff --git a/libraries/SPI/SPI.h b/libraries/SPI/SPI.h new file mode 100644 index 0000000..f647d5c --- /dev/null +++ b/libraries/SPI/SPI.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st> + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#ifndef _SPI_H_INCLUDED +#define _SPI_H_INCLUDED + +#include <stdio.h> +#include <Arduino.h> +#include <avr/pgmspace.h> + +#define SPI_CLOCK_DIV4 0x00 +#define SPI_CLOCK_DIV16 0x01 +#define SPI_CLOCK_DIV64 0x02 +#define SPI_CLOCK_DIV128 0x03 +#define SPI_CLOCK_DIV2 0x04 +#define SPI_CLOCK_DIV8 0x05 +#define SPI_CLOCK_DIV32 0x06 +//#define SPI_CLOCK_DIV64 0x07 + +#define SPI_MODE0 0x00 +#define SPI_MODE1 0x04 +#define SPI_MODE2 0x08 +#define SPI_MODE3 0x0C + +#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR +#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR +#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR + +class SPIClass { +public: + inline static byte transfer(byte _data); + + // SPI Configuration methods + + inline static void attachInterrupt(); + inline static void detachInterrupt(); // Default + + static void begin(); // Default + static void end(); + + static void setBitOrder(uint8_t); + static void setDataMode(uint8_t); + static void setClockDivider(uint8_t); +}; + +extern SPIClass SPI; + +byte SPIClass::transfer(byte _data) { + SPDR = _data; + while (!(SPSR & _BV(SPIF))) + ; + return SPDR; +} + +void SPIClass::attachInterrupt() { + SPCR |= _BV(SPIE); +} + +void SPIClass::detachInterrupt() { + SPCR &= ~_BV(SPIE); +} + +#endif diff --git a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino new file mode 100644 index 0000000..8104fcb --- /dev/null +++ b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino @@ -0,0 +1,143 @@ +/* + SCP1000 Barometric Pressure Sensor Display + + Shows the output of a Barometric Pressure Sensor on a + Uses the SPI library. For details on the sensor, see: + http://www.sparkfun.com/commerce/product_info.php?products_id=8161 + http://www.vti.fi/en/support/obsolete_products/pressure_sensors/ + + This sketch adapted from Nathan Seidle's SCP1000 example for PIC: + http://www.sparkfun.com/datasheets/Sensors/SCP1000-Testing.zip + + Circuit: + SCP1000 sensor attached to pins 6, 7, 10 - 13: + DRDY: pin 6 + CSB: pin 7 + MOSI: pin 11 + MISO: pin 12 + SCK: pin 13 + + created 31 July 2010 + modified 14 August 2010 + by Tom Igoe + */ + +// the sensor communicates using SPI, so include the library: +#include <SPI.h> + +//Sensor's memory register addresses: +const int PRESSURE = 0x1F; //3 most significant bits of pressure +const int PRESSURE_LSB = 0x20; //16 least significant bits of pressure +const int TEMPERATURE = 0x21; //16 bit temperature reading +const byte READ = 0b11111100; // SCP1000's read command +const byte WRITE = 0b00000010; // SCP1000's write command + +// pins used for the connection with the sensor +// the other you need are controlled by the SPI library): +const int dataReadyPin = 6; +const int chipSelectPin = 7; + +void setup() { + Serial.begin(9600); + + // start the SPI library: + SPI.begin(); + + // initalize the data ready and chip select pins: + pinMode(dataReadyPin, INPUT); + pinMode(chipSelectPin, OUTPUT); + + //Configure SCP1000 for low noise configuration: + writeRegister(0x02, 0x2D); + writeRegister(0x01, 0x03); + writeRegister(0x03, 0x02); + // give the sensor time to set up: + delay(100); +} + +void loop() { + //Select High Resolution Mode + writeRegister(0x03, 0x0A); + + // don't do anything until the data ready pin is high: + if (digitalRead(dataReadyPin) == HIGH) { + //Read the temperature data + int tempData = readRegister(0x21, 2); + + // convert the temperature to celsius and display it: + float realTemp = (float)tempData / 20.0; + Serial.print("Temp[C]="); + Serial.print(realTemp); + + + //Read the pressure data highest 3 bits: + byte pressure_data_high = readRegister(0x1F, 1); + pressure_data_high &= 0b00000111; //you only needs bits 2 to 0 + + //Read the pressure data lower 16 bits: + unsigned int pressure_data_low = readRegister(0x20, 2); + //combine the two parts into one 19-bit number: + long pressure = ((pressure_data_high << 16) | pressure_data_low) / 4; + + // display the temperature: + Serial.println("\tPressure [Pa]=" + String(pressure)); + } +} + +//Read from or write to register from the SCP1000: +unsigned int readRegister(byte thisRegister, int bytesToRead ) { + byte inByte = 0; // incoming byte from the SPI + unsigned int result = 0; // result to return + Serial.print(thisRegister, BIN); + Serial.print("\t"); + // SCP1000 expects the register name in the upper 6 bits + // of the byte. So shift the bits left by two bits: + thisRegister = thisRegister << 2; + // now combine the address and the command into one byte + byte dataToSend = thisRegister & READ; + Serial.println(thisRegister, BIN); + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + // send the device the register you want to read: + SPI.transfer(dataToSend); + // send a value of 0 to read the first byte returned: + result = SPI.transfer(0x00); + // decrement the number of bytes left to read: + bytesToRead--; + // if you still have another byte to read: + if (bytesToRead > 0) { + // shift the first byte left, then get the second byte: + result = result << 8; + inByte = SPI.transfer(0x00); + // combine the byte you just got with the previous one: + result = result | inByte; + // decrement the number of bytes left to read: + bytesToRead--; + } + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); + // return the result: + return(result); +} + + +//Sends a write command to SCP1000 + +void writeRegister(byte thisRegister, byte thisValue) { + + // SCP1000 expects the register address in the upper 6 bits + // of the byte. So shift the bits left by two bits: + thisRegister = thisRegister << 2; + // now combine the register address and the command into one byte: + byte dataToSend = thisRegister | WRITE; + + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + + SPI.transfer(dataToSend); //Send register location + SPI.transfer(thisValue); //Send value to record into register + + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); +} + diff --git a/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino new file mode 100644 index 0000000..b135a74 --- /dev/null +++ b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino @@ -0,0 +1,71 @@ +/* + Digital Pot Control + + This example controls an Analog Devices AD5206 digital potentiometer. + The AD5206 has 6 potentiometer channels. Each channel's pins are labeled + A - connect this to voltage + W - this is the pot's wiper, which changes when you set it + B - connect this to ground. + + The AD5206 is SPI-compatible,and to command it, you send two bytes, + one with the channel number (0 - 5) and one with the resistance value for the + channel (0 - 255). + + The circuit: + * All A pins of AD5206 connected to +5V + * All B pins of AD5206 connected to ground + * An LED and a 220-ohm resisor in series connected from each W pin to ground + * CS - to digital pin 10 (SS pin) + * SDI - to digital pin 11 (MOSI pin) + * CLK - to digital pin 13 (SCK pin) + + created 10 Aug 2010 + by Tom Igoe + + Thanks to Heather Dewey-Hagborg for the original tutorial, 2005 + +*/ + + +// inslude the SPI library: +#include <SPI.h> + + +// set pin 10 as the slave select for the digital pot: +const int slaveSelectPin = 10; + +void setup() { + // set the slaveSelectPin as an output: + pinMode (slaveSelectPin, OUTPUT); + // initialize SPI: + SPI.begin(); +} + +void loop() { + // go through the six channels of the digital pot: + for (int channel = 0; channel < 6; channel++) { + // change the resistance on this channel from min to max: + for (int level = 0; level < 255; level++) { + digitalPotWrite(channel, level); + delay(10); + } + // wait a second at the top: + delay(100); + // change the resistance on this channel from max to min: + for (int level = 0; level < 255; level++) { + digitalPotWrite(channel, 255 - level); + delay(10); + } + } + +} + +void digitalPotWrite(int address, int value) { + // take the SS pin low to select the chip: + digitalWrite(slaveSelectPin, LOW); + // send in the address and value via SPI: + SPI.transfer(address); + SPI.transfer(value); + // take the SS pin high to de-select the chip: + digitalWrite(slaveSelectPin, HIGH); +} diff --git a/libraries/SPI/keywords.txt b/libraries/SPI/keywords.txt new file mode 100644 index 0000000..fa76165 --- /dev/null +++ b/libraries/SPI/keywords.txt @@ -0,0 +1,36 @@ +####################################### +# Syntax Coloring Map SPI +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +SPI KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### +begin KEYWORD2 +end KEYWORD2 +transfer KEYWORD2 +setBitOrder KEYWORD2 +setDataMode KEYWORD2 +setClockDivider KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### +SPI_CLOCK_DIV4 LITERAL1 +SPI_CLOCK_DIV16 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_CLOCK_DIV128 LITERAL1 +SPI_CLOCK_DIV2 LITERAL1 +SPI_CLOCK_DIV8 LITERAL1 +SPI_CLOCK_DIV32 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_MODE0 LITERAL1 +SPI_MODE1 LITERAL1 +SPI_MODE2 LITERAL1 +SPI_MODE3 LITERAL1
\ No newline at end of file diff --git a/libraries/SoftwareSerial/SoftwareSerial.cpp b/libraries/SoftwareSerial/SoftwareSerial.cpp new file mode 100644 index 0000000..64496fe --- /dev/null +++ b/libraries/SoftwareSerial/SoftwareSerial.cpp @@ -0,0 +1,518 @@ +/*
+SoftwareSerial.cpp (formerly NewSoftSerial.cpp) -
+Multi-instance software serial library for Arduino/Wiring
+-- Interrupt-driven receive and other improvements by ladyada
+ (http://ladyada.net)
+-- Tuning, circular buffer, derivation from class Print/Stream,
+ multi-instance support, porting to 8MHz processors,
+ various optimizations, PROGMEM delay tables, inverse logic and
+ direct port writing by Mikal Hart (http://www.arduiniana.org)
+-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
+-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
+-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+http://arduiniana.org.
+*/
+
+// When set, _DEBUG co-opts pins 11 and 13 for debugging with an
+// oscilloscope or logic analyzer. Beware: it also slightly modifies
+// the bit times, so don't rely on it too much at high baud rates
+#define _DEBUG 0
+#define _DEBUG_PIN1 11
+#define _DEBUG_PIN2 13
+//
+// Includes
+//
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <Arduino.h>
+#include <SoftwareSerial.h>
+//
+// Lookup table
+//
+typedef struct _DELAY_TABLE
+{
+ long baud;
+ unsigned short rx_delay_centering;
+ unsigned short rx_delay_intrabit;
+ unsigned short rx_delay_stopbit;
+ unsigned short tx_delay;
+} DELAY_TABLE;
+
+#if F_CPU == 16000000
+
+static const DELAY_TABLE PROGMEM table[] =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 1, 17, 17, 12, },
+ { 57600, 10, 37, 37, 33, },
+ { 38400, 25, 57, 57, 54, },
+ { 31250, 31, 70, 70, 68, },
+ { 28800, 34, 77, 77, 74, },
+ { 19200, 54, 117, 117, 114, },
+ { 14400, 74, 156, 156, 153, },
+ { 9600, 114, 236, 236, 233, },
+ { 4800, 233, 474, 474, 471, },
+ { 2400, 471, 950, 950, 947, },
+ { 1200, 947, 1902, 1902, 1899, },
+ { 600, 1902, 3804, 3804, 3800, },
+ { 300, 3804, 7617, 7617, 7614, },
+};
+
+const int XMIT_START_ADJUSTMENT = 5;
+
+#elif F_CPU == 8000000
+
+static const DELAY_TABLE table[] PROGMEM =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 1, 5, 5, 3, },
+ { 57600, 1, 15, 15, 13, },
+ { 38400, 2, 25, 26, 23, },
+ { 31250, 7, 32, 33, 29, },
+ { 28800, 11, 35, 35, 32, },
+ { 19200, 20, 55, 55, 52, },
+ { 14400, 30, 75, 75, 72, },
+ { 9600, 50, 114, 114, 112, },
+ { 4800, 110, 233, 233, 230, },
+ { 2400, 229, 472, 472, 469, },
+ { 1200, 467, 948, 948, 945, },
+ { 600, 948, 1895, 1895, 1890, },
+ { 300, 1895, 3805, 3805, 3802, },
+};
+
+const int XMIT_START_ADJUSTMENT = 4;
+
+#elif F_CPU == 20000000
+
+// 20MHz support courtesy of the good people at macegr.com.
+// Thanks, Garrett!
+
+static const DELAY_TABLE PROGMEM table[] =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 3, 21, 21, 18, },
+ { 57600, 20, 43, 43, 41, },
+ { 38400, 37, 73, 73, 70, },
+ { 31250, 45, 89, 89, 88, },
+ { 28800, 46, 98, 98, 95, },
+ { 19200, 71, 148, 148, 145, },
+ { 14400, 96, 197, 197, 194, },
+ { 9600, 146, 297, 297, 294, },
+ { 4800, 296, 595, 595, 592, },
+ { 2400, 592, 1189, 1189, 1186, },
+ { 1200, 1187, 2379, 2379, 2376, },
+ { 600, 2379, 4759, 4759, 4755, },
+ { 300, 4759, 9523, 9523, 9520, },
+};
+
+const int XMIT_START_ADJUSTMENT = 6;
+
+#else
+
+#error This version of SoftwareSerial supports only 20, 16 and 8MHz processors
+
+#endif
+
+//
+// Statics
+//
+SoftwareSerial *SoftwareSerial::active_object = 0;
+char SoftwareSerial::_receive_buffer[_SS_MAX_RX_BUFF];
+volatile uint8_t SoftwareSerial::_receive_buffer_tail = 0;
+volatile uint8_t SoftwareSerial::_receive_buffer_head = 0;
+
+//
+// Debugging
+//
+// This function generates a brief pulse
+// for debugging or measuring on an oscilloscope.
+inline void DebugPulse(uint8_t pin, uint8_t count)
+{
+#if _DEBUG
+ volatile uint8_t *pport = portOutputRegister(digitalPinToPort(pin));
+
+ uint8_t val = *pport;
+ while (count--)
+ {
+ *pport = val | digitalPinToBitMask(pin);
+ *pport = val;
+ }
+#endif
+}
+
+//
+// Private methods
+//
+
+/* static */
+inline void SoftwareSerial::tunedDelay(uint16_t delay) {
+ uint8_t tmp=0;
+
+ asm volatile("sbiw %0, 0x01 \n\t"
+ "ldi %1, 0xFF \n\t"
+ "cpi %A0, 0xFF \n\t"
+ "cpc %B0, %1 \n\t"
+ "brne .-10 \n\t"
+ : "+r" (delay), "+a" (tmp)
+ : "0" (delay)
+ );
+}
+
+// This function sets the current object as the "listening"
+// one and returns true if it replaces another
+bool SoftwareSerial::listen()
+{
+ if (active_object != this)
+ {
+ _buffer_overflow = false;
+ uint8_t oldSREG = SREG;
+ cli();
+ _receive_buffer_head = _receive_buffer_tail = 0;
+ active_object = this;
+ SREG = oldSREG;
+ return true;
+ }
+
+ return false;
+}
+
+//
+// The receive routine called by the interrupt handler
+//
+void SoftwareSerial::recv()
+{
+
+#if GCC_VERSION < 40302
+// Work-around for avr-gcc 4.3.0 OSX version bug
+// Preserve the registers that the compiler misses
+// (courtesy of Arduino forum user *etracer*)
+ asm volatile(
+ "push r18 \n\t"
+ "push r19 \n\t"
+ "push r20 \n\t"
+ "push r21 \n\t"
+ "push r22 \n\t"
+ "push r23 \n\t"
+ "push r26 \n\t"
+ "push r27 \n\t"
+ ::);
+#endif
+
+ uint8_t d = 0;
+
+ // If RX line is high, then we don't see any start bit
+ // so interrupt is probably not for us
+ if (_inverse_logic ? rx_pin_read() : !rx_pin_read())
+ {
+ // Wait approximately 1/2 of a bit width to "center" the sample
+ tunedDelay(_rx_delay_centering);
+ DebugPulse(_DEBUG_PIN2, 1);
+
+ // Read each of the 8 bits
+ for (uint8_t i=0x1; i; i <<= 1)
+ {
+ tunedDelay(_rx_delay_intrabit);
+ DebugPulse(_DEBUG_PIN2, 1);
+ uint8_t noti = ~i;
+ if (rx_pin_read())
+ d |= i;
+ else // else clause added to ensure function timing is ~balanced
+ d &= noti;
+ }
+
+ // skip the stop bit
+ tunedDelay(_rx_delay_stopbit);
+ DebugPulse(_DEBUG_PIN2, 1);
+
+ if (_inverse_logic)
+ d = ~d;
+
+ // if buffer full, set the overflow flag and return
+ if ((_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF != _receive_buffer_head)
+ {
+ // save new data in buffer: tail points to where byte goes
+ _receive_buffer[_receive_buffer_tail] = d; // save new byte
+ _receive_buffer_tail = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF;
+ }
+ else
+ {
+#if _DEBUG // for scope: pulse pin as overflow indictator
+ DebugPulse(_DEBUG_PIN1, 1);
+#endif
+ _buffer_overflow = true;
+ }
+ }
+
+#if GCC_VERSION < 40302
+// Work-around for avr-gcc 4.3.0 OSX version bug
+// Restore the registers that the compiler misses
+ asm volatile(
+ "pop r27 \n\t"
+ "pop r26 \n\t"
+ "pop r23 \n\t"
+ "pop r22 \n\t"
+ "pop r21 \n\t"
+ "pop r20 \n\t"
+ "pop r19 \n\t"
+ "pop r18 \n\t"
+ ::);
+#endif
+}
+
+void SoftwareSerial::tx_pin_write(uint8_t pin_state)
+{
+ if (pin_state == LOW)
+ *_transmitPortRegister &= ~_transmitBitMask;
+ else
+ *_transmitPortRegister |= _transmitBitMask;
+}
+
+uint8_t SoftwareSerial::rx_pin_read()
+{
+ return *_receivePortRegister & _receiveBitMask;
+}
+
+//
+// Interrupt handling
+//
+
+/* static */
+inline void SoftwareSerial::handle_interrupt()
+{
+ if (active_object)
+ {
+ active_object->recv();
+ }
+}
+
+#if defined(PCINT0_vect)
+ISR(PCINT0_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT1_vect)
+ISR(PCINT1_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT2_vect)
+ISR(PCINT2_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT3_vect)
+ISR(PCINT3_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+//
+// Constructor
+//
+SoftwareSerial::SoftwareSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic /* = false */) :
+ _rx_delay_centering(0),
+ _rx_delay_intrabit(0),
+ _rx_delay_stopbit(0),
+ _tx_delay(0),
+ _buffer_overflow(false),
+ _inverse_logic(inverse_logic)
+{
+ setTX(transmitPin);
+ setRX(receivePin);
+}
+
+//
+// Destructor
+//
+SoftwareSerial::~SoftwareSerial()
+{
+ end();
+}
+
+void SoftwareSerial::setTX(uint8_t tx)
+{
+ pinMode(tx, OUTPUT);
+ digitalWrite(tx, HIGH);
+ _transmitBitMask = digitalPinToBitMask(tx);
+ uint8_t port = digitalPinToPort(tx);
+ _transmitPortRegister = portOutputRegister(port);
+}
+
+void SoftwareSerial::setRX(uint8_t rx)
+{
+ pinMode(rx, INPUT);
+ if (!_inverse_logic)
+ digitalWrite(rx, HIGH); // pullup for normal logic!
+ _receivePin = rx;
+ _receiveBitMask = digitalPinToBitMask(rx);
+ uint8_t port = digitalPinToPort(rx);
+ _receivePortRegister = portInputRegister(port);
+}
+
+//
+// Public methods
+//
+
+void SoftwareSerial::begin(long speed)
+{
+ _rx_delay_centering = _rx_delay_intrabit = _rx_delay_stopbit = _tx_delay = 0;
+
+ for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i)
+ {
+ long baud = pgm_read_dword(&table[i].baud);
+ if (baud == speed)
+ {
+ _rx_delay_centering = pgm_read_word(&table[i].rx_delay_centering);
+ _rx_delay_intrabit = pgm_read_word(&table[i].rx_delay_intrabit);
+ _rx_delay_stopbit = pgm_read_word(&table[i].rx_delay_stopbit);
+ _tx_delay = pgm_read_word(&table[i].tx_delay);
+ break;
+ }
+ }
+
+ // Set up RX interrupts, but only if we have a valid RX baud rate
+ if (_rx_delay_stopbit)
+ {
+ if (digitalPinToPCICR(_receivePin))
+ {
+ *digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));
+ *digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));
+ }
+ tunedDelay(_tx_delay); // if we were low this establishes the end
+ }
+
+#if _DEBUG
+ pinMode(_DEBUG_PIN1, OUTPUT);
+ pinMode(_DEBUG_PIN2, OUTPUT);
+#endif
+
+ listen();
+}
+
+void SoftwareSerial::end()
+{
+ if (digitalPinToPCMSK(_receivePin))
+ *digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));
+}
+
+
+// Read data from buffer
+int SoftwareSerial::read()
+{
+ if (!isListening())
+ return -1;
+
+ // Empty buffer?
+ if (_receive_buffer_head == _receive_buffer_tail)
+ return -1;
+
+ // Read from "head"
+ uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte
+ _receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF;
+ return d;
+}
+
+int SoftwareSerial::available()
+{
+ if (!isListening())
+ return 0;
+
+ return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF;
+}
+
+size_t SoftwareSerial::write(uint8_t b)
+{
+ if (_tx_delay == 0) {
+ setWriteError();
+ return 0;
+ }
+
+ uint8_t oldSREG = SREG;
+ cli(); // turn off interrupts for a clean txmit
+
+ // Write the start bit
+ tx_pin_write(_inverse_logic ? HIGH : LOW);
+ tunedDelay(_tx_delay + XMIT_START_ADJUSTMENT);
+
+ // Write each of the 8 bits
+ if (_inverse_logic)
+ {
+ for (byte mask = 0x01; mask; mask <<= 1)
+ {
+ if (b & mask) // choose bit
+ tx_pin_write(LOW); // send 1
+ else
+ tx_pin_write(HIGH); // send 0
+
+ tunedDelay(_tx_delay);
+ }
+
+ tx_pin_write(LOW); // restore pin to natural state
+ }
+ else
+ {
+ for (byte mask = 0x01; mask; mask <<= 1)
+ {
+ if (b & mask) // choose bit
+ tx_pin_write(HIGH); // send 1
+ else
+ tx_pin_write(LOW); // send 0
+
+ tunedDelay(_tx_delay);
+ }
+
+ tx_pin_write(HIGH); // restore pin to natural state
+ }
+
+ SREG = oldSREG; // turn interrupts back on
+ tunedDelay(_tx_delay);
+
+ return 1;
+}
+
+void SoftwareSerial::flush()
+{
+ if (!isListening())
+ return;
+
+ uint8_t oldSREG = SREG;
+ cli();
+ _receive_buffer_head = _receive_buffer_tail = 0;
+ SREG = oldSREG;
+}
+
+int SoftwareSerial::peek()
+{
+ if (!isListening())
+ return -1;
+
+ // Empty buffer?
+ if (_receive_buffer_head == _receive_buffer_tail)
+ return -1;
+
+ // Read from "head"
+ return _receive_buffer[_receive_buffer_head];
+}
diff --git a/libraries/SoftwareSerial/SoftwareSerial.h b/libraries/SoftwareSerial/SoftwareSerial.h new file mode 100644 index 0000000..a6a60b5 --- /dev/null +++ b/libraries/SoftwareSerial/SoftwareSerial.h @@ -0,0 +1,112 @@ +/*
+SoftwareSerial.h (formerly NewSoftSerial.h) -
+Multi-instance software serial library for Arduino/Wiring
+-- Interrupt-driven receive and other improvements by ladyada
+ (http://ladyada.net)
+-- Tuning, circular buffer, derivation from class Print/Stream,
+ multi-instance support, porting to 8MHz processors,
+ various optimizations, PROGMEM delay tables, inverse logic and
+ direct port writing by Mikal Hart (http://www.arduiniana.org)
+-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
+-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
+-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+http://arduiniana.org.
+*/
+
+#ifndef SoftwareSerial_h
+#define SoftwareSerial_h
+
+#include <inttypes.h>
+#include <Stream.h>
+
+/******************************************************************************
+* Definitions
+******************************************************************************/
+
+#define _SS_MAX_RX_BUFF 64 // RX buffer size
+#ifndef GCC_VERSION
+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#endif
+
+class SoftwareSerial : public Stream
+{
+private:
+ // per object data
+ uint8_t _receivePin;
+ uint8_t _receiveBitMask;
+ volatile uint8_t *_receivePortRegister;
+ uint8_t _transmitBitMask;
+ volatile uint8_t *_transmitPortRegister;
+
+ uint16_t _rx_delay_centering;
+ uint16_t _rx_delay_intrabit;
+ uint16_t _rx_delay_stopbit;
+ uint16_t _tx_delay;
+
+ uint16_t _buffer_overflow:1;
+ uint16_t _inverse_logic:1;
+
+ // static data
+ static char _receive_buffer[_SS_MAX_RX_BUFF];
+ static volatile uint8_t _receive_buffer_tail;
+ static volatile uint8_t _receive_buffer_head;
+ static SoftwareSerial *active_object;
+
+ // private methods
+ void recv();
+ uint8_t rx_pin_read();
+ void tx_pin_write(uint8_t pin_state);
+ void setTX(uint8_t transmitPin);
+ void setRX(uint8_t receivePin);
+
+ // private static method for timing
+ static inline void tunedDelay(uint16_t delay);
+
+public:
+ // public methods
+ SoftwareSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic = false);
+ ~SoftwareSerial();
+ void begin(long speed);
+ bool listen();
+ void end();
+ bool isListening() { return this == active_object; }
+ bool overflow() { bool ret = _buffer_overflow; _buffer_overflow = false; return ret; }
+ int peek();
+
+ virtual size_t write(uint8_t byte);
+ virtual int read();
+ virtual int available();
+ virtual void flush();
+
+ using Print::write;
+
+ // public only for easy access by interrupt handlers
+ static inline void handle_interrupt();
+};
+
+// Arduino 0012 workaround
+#undef int
+#undef char
+#undef long
+#undef byte
+#undef float
+#undef abs
+#undef round
+
+#endif
diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino new file mode 100644 index 0000000..f659133 --- /dev/null +++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino @@ -0,0 +1,55 @@ +/* + Software serial multple serial test + + Receives from the hardware serial, sends to software serial. + Receives from software serial, sends to hardware serial. + + The circuit: + * RX is digital pin 10 (connect to TX of other device) + * TX is digital pin 11 (connect to RX of other device) + + Note: + Not all pins on the Mega and Mega 2560 support change interrupts, + so only the following can be used for RX: + 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 + + Not all pins on the Leonardo support change interrupts, + so only the following can be used for RX: + 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). + + created back in the mists of time + modified 25 May 2012 + by Tom Igoe + based on Mikal Hart's example + + This example code is in the public domain. + + */ +#include <SoftwareSerial.h> + +SoftwareSerial mySerial(10, 11); // RX, TX + +void setup() +{ + // Open serial communications and wait for port to open: + Serial.begin(57600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + Serial.println("Goodnight moon!"); + + // set the data rate for the SoftwareSerial port + mySerial.begin(4800); + mySerial.println("Hello, world?"); +} + +void loop() // run over and over +{ + if (mySerial.available()) + Serial.write(mySerial.read()); + if (Serial.available()) + mySerial.write(Serial.read()); +} + diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino new file mode 100644 index 0000000..95881a6 --- /dev/null +++ b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino @@ -0,0 +1,93 @@ +/* + Software serial multple serial test + + Receives from the two software serial ports, + sends to the hardware serial port. + + In order to listen on a software port, you call port.listen(). + When using two software serial ports, you have to switch ports + by listen()ing on each one in turn. Pick a logical time to switch + ports, like the end of an expected transmission, or when the + buffer is empty. This example switches ports when there is nothing + more to read from a port + + The circuit: + Two devices which communicate serially are needed. + * First serial device's TX attached to digital pin 2, RX to pin 3 + * Second serial device's TX attached to digital pin 4, RX to pin 5 + + Note: + Not all pins on the Mega and Mega 2560 support change interrupts, + so only the following can be used for RX: + 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 + + Not all pins on the Leonardo support change interrupts, + so only the following can be used for RX: + 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). + + created 18 Apr. 2011 + modified 25 May 2012 + by Tom Igoe + based on Mikal Hart's twoPortRXExample + + This example code is in the public domain. + + */ + +#include <SoftwareSerial.h> +// software serial #1: TX = digital pin 10, RX = digital pin 11 +SoftwareSerial portOne(10, 11); + +// software serial #2: TX = digital pin 8, RX = digital pin 9 +// on the Mega, use other pins instead, since 8 and 9 don't work on the Mega +SoftwareSerial portTwo(8, 9); + +void setup() +{ + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // Start each software serial port + portOne.begin(9600); + portTwo.begin(9600); +} + +void loop() +{ + // By default, the last intialized port is listening. + // when you want to listen on a port, explicitly select it: + portOne.listen(); + Serial.println("Data from port one:"); + // while there is data coming in, read it + // and send to the hardware serial port: + while (portOne.available() > 0) { + char inByte = portOne.read(); + Serial.write(inByte); + } + + // blank line to separate data from the two ports: + Serial.println(); + + // Now listen on the second port + portTwo.listen(); + // while there is data coming in, read it + // and send to the hardware serial port: + Serial.println("Data from port two:"); + while (portTwo.available() > 0) { + char inByte = portTwo.read(); + Serial.write(inByte); + } + + // blank line to separate data from the two ports: + Serial.println(); +} + + + + + + diff --git a/libraries/SoftwareSerial/keywords.txt b/libraries/SoftwareSerial/keywords.txt new file mode 100644 index 0000000..aaea17c --- /dev/null +++ b/libraries/SoftwareSerial/keywords.txt @@ -0,0 +1,30 @@ +####################################### +# Syntax Coloring Map for SoftwareSerial +# (formerly NewSoftSerial) +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +SoftwareSerial KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +end KEYWORD2 +read KEYWORD2 +write KEYWORD2 +available KEYWORD2 +isListening KEYWORD2 +overflow KEYWORD2 +flush KEYWORD2 +listen KEYWORD2 +peek KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/Wire/Wire.cpp b/libraries/Wire/Wire.cpp new file mode 100644 index 0000000..4e7a17c --- /dev/null +++ b/libraries/Wire/Wire.cpp @@ -0,0 +1,298 @@ +/* + TwoWire.cpp - TWI/I2C library for Wiring & Arduino + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts +*/ + +extern "C" { + #include <stdlib.h> + #include <string.h> + #include <inttypes.h> + #include "twi.h" +} + +#include "Wire.h" + +// Initialize Class Variables ////////////////////////////////////////////////// + +uint8_t TwoWire::rxBuffer[BUFFER_LENGTH]; +uint8_t TwoWire::rxBufferIndex = 0; +uint8_t TwoWire::rxBufferLength = 0; + +uint8_t TwoWire::txAddress = 0; +uint8_t TwoWire::txBuffer[BUFFER_LENGTH]; +uint8_t TwoWire::txBufferIndex = 0; +uint8_t TwoWire::txBufferLength = 0; + +uint8_t TwoWire::transmitting = 0; +void (*TwoWire::user_onRequest)(void); +void (*TwoWire::user_onReceive)(int); + +// Constructors //////////////////////////////////////////////////////////////// + +TwoWire::TwoWire() +{ +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void TwoWire::begin(void) +{ + rxBufferIndex = 0; + rxBufferLength = 0; + + txBufferIndex = 0; + txBufferLength = 0; + + twi_init(); +} + +void TwoWire::begin(uint8_t address) +{ + twi_setAddress(address); + twi_attachSlaveTxEvent(onRequestService); + twi_attachSlaveRxEvent(onReceiveService); + begin(); +} + +void TwoWire::begin(int address) +{ + begin((uint8_t)address); +} + +uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity, uint8_t sendStop) +{ + // clamp to buffer length + if(quantity > BUFFER_LENGTH){ + quantity = BUFFER_LENGTH; + } + // perform blocking read into buffer + uint8_t read = twi_readFrom(address, rxBuffer, quantity, sendStop); + // set rx buffer iterator vars + rxBufferIndex = 0; + rxBufferLength = read; + + return read; +} + +uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity) +{ + return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)true); +} + +uint8_t TwoWire::requestFrom(int address, int quantity) +{ + return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)true); +} + +uint8_t TwoWire::requestFrom(int address, int quantity, int sendStop) +{ + return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)sendStop); +} + +void TwoWire::beginTransmission(uint8_t address) +{ + // indicate that we are transmitting + transmitting = 1; + // set address of targeted slave + txAddress = address; + // reset tx buffer iterator vars + txBufferIndex = 0; + txBufferLength = 0; +} + +void TwoWire::beginTransmission(int address) +{ + beginTransmission((uint8_t)address); +} + +// +// Originally, 'endTransmission' was an f(void) function. +// It has been modified to take one parameter indicating +// whether or not a STOP should be performed on the bus. +// Calling endTransmission(false) allows a sketch to +// perform a repeated start. +// +// WARNING: Nothing in the library keeps track of whether +// the bus tenure has been properly ended with a STOP. It +// is very possible to leave the bus in a hung state if +// no call to endTransmission(true) is made. Some I2C +// devices will behave oddly if they do not see a STOP. +// +uint8_t TwoWire::endTransmission(uint8_t sendStop) +{ + // transmit buffer (blocking) + int8_t ret = twi_writeTo(txAddress, txBuffer, txBufferLength, 1, sendStop); + // reset tx buffer iterator vars + txBufferIndex = 0; + txBufferLength = 0; + // indicate that we are done transmitting + transmitting = 0; + return ret; +} + +// This provides backwards compatibility with the original +// definition, and expected behaviour, of endTransmission +// +uint8_t TwoWire::endTransmission(void) +{ + return endTransmission(true); +} + +// must be called in: +// slave tx event callback +// or after beginTransmission(address) +size_t TwoWire::write(uint8_t data) +{ + if(transmitting){ + // in master transmitter mode + // don't bother if buffer is full + if(txBufferLength >= BUFFER_LENGTH){ + setWriteError(); + return 0; + } + // put byte in tx buffer + txBuffer[txBufferIndex] = data; + ++txBufferIndex; + // update amount in buffer + txBufferLength = txBufferIndex; + }else{ + // in slave send mode + // reply to master + twi_transmit(&data, 1); + } + return 1; +} + +// must be called in: +// slave tx event callback +// or after beginTransmission(address) +size_t TwoWire::write(const uint8_t *data, size_t quantity) +{ + if(transmitting){ + // in master transmitter mode + for(size_t i = 0; i < quantity; ++i){ + write(data[i]); + } + }else{ + // in slave send mode + // reply to master + twi_transmit(data, quantity); + } + return quantity; +} + +// must be called in: +// slave rx event callback +// or after requestFrom(address, numBytes) +int TwoWire::available(void) +{ + return rxBufferLength - rxBufferIndex; +} + +// must be called in: +// slave rx event callback +// or after requestFrom(address, numBytes) +int TwoWire::read(void) +{ + int value = -1; + + // get each successive byte on each call + if(rxBufferIndex < rxBufferLength){ + value = rxBuffer[rxBufferIndex]; + ++rxBufferIndex; + } + + return value; +} + +// must be called in: +// slave rx event callback +// or after requestFrom(address, numBytes) +int TwoWire::peek(void) +{ + int value = -1; + + if(rxBufferIndex < rxBufferLength){ + value = rxBuffer[rxBufferIndex]; + } + + return value; +} + +void TwoWire::flush(void) +{ + // XXX: to be implemented. +} + +// behind the scenes function that is called when data is received +void TwoWire::onReceiveService(uint8_t* inBytes, int numBytes) +{ + // don't bother if user hasn't registered a callback + if(!user_onReceive){ + return; + } + // don't bother if rx buffer is in use by a master requestFrom() op + // i know this drops data, but it allows for slight stupidity + // meaning, they may not have read all the master requestFrom() data yet + if(rxBufferIndex < rxBufferLength){ + return; + } + // copy twi rx buffer into local read buffer + // this enables new reads to happen in parallel + for(uint8_t i = 0; i < numBytes; ++i){ + rxBuffer[i] = inBytes[i]; + } + // set rx iterator vars + rxBufferIndex = 0; + rxBufferLength = numBytes; + // alert user program + user_onReceive(numBytes); +} + +// behind the scenes function that is called when data is requested +void TwoWire::onRequestService(void) +{ + // don't bother if user hasn't registered a callback + if(!user_onRequest){ + return; + } + // reset tx buffer iterator vars + // !!! this will kill any pending pre-master sendTo() activity + txBufferIndex = 0; + txBufferLength = 0; + // alert user program + user_onRequest(); +} + +// sets function called on slave write +void TwoWire::onReceive( void (*function)(int) ) +{ + user_onReceive = function; +} + +// sets function called on slave read +void TwoWire::onRequest( void (*function)(void) ) +{ + user_onRequest = function; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +TwoWire Wire = TwoWire(); + diff --git a/libraries/Wire/Wire.h b/libraries/Wire/Wire.h new file mode 100644 index 0000000..a93d0f5 --- /dev/null +++ b/libraries/Wire/Wire.h @@ -0,0 +1,79 @@ +/* + TwoWire.h - TWI/I2C library for Arduino & Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts +*/ + +#ifndef TwoWire_h +#define TwoWire_h + +#include <inttypes.h> +#include "Stream.h" + +#define BUFFER_LENGTH 32 + +class TwoWire : public Stream +{ + private: + static uint8_t rxBuffer[]; + static uint8_t rxBufferIndex; + static uint8_t rxBufferLength; + + static uint8_t txAddress; + static uint8_t txBuffer[]; + static uint8_t txBufferIndex; + static uint8_t txBufferLength; + + static uint8_t transmitting; + static void (*user_onRequest)(void); + static void (*user_onReceive)(int); + static void onRequestService(void); + static void onReceiveService(uint8_t*, int); + public: + TwoWire(); + void begin(); + void begin(uint8_t); + void begin(int); + void beginTransmission(uint8_t); + void beginTransmission(int); + uint8_t endTransmission(void); + uint8_t endTransmission(uint8_t); + uint8_t requestFrom(uint8_t, uint8_t); + uint8_t requestFrom(uint8_t, uint8_t, uint8_t); + uint8_t requestFrom(int, int); + uint8_t requestFrom(int, int, int); + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *, size_t); + virtual int available(void); + virtual int read(void); + virtual int peek(void); + virtual void flush(void); + void onReceive( void (*)(int) ); + void onRequest( void (*)(void) ); + + inline size_t write(unsigned long n) { return write((uint8_t)n); } + inline size_t write(long n) { return write((uint8_t)n); } + inline size_t write(unsigned int n) { return write((uint8_t)n); } + inline size_t write(int n) { return write((uint8_t)n); } + using Print::write; +}; + +extern TwoWire Wire; + +#endif + diff --git a/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino new file mode 100644 index 0000000..d97a9e3 --- /dev/null +++ b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino @@ -0,0 +1,87 @@ +// I2C SRF10 or SRF08 Devantech Ultrasonic Ranger Finder +// by Nicholas Zambetti <http://www.zambetti.com> +// and James Tichenor <http://www.jamestichenor.net> + +// Demonstrates use of the Wire library reading data from the +// Devantech Utrasonic Rangers SFR08 and SFR10 + +// Created 29 April 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) + Serial.begin(9600); // start serial communication at 9600bps +} + +int reading = 0; + +void loop() +{ + // step 1: instruct sensor to read echoes + Wire.beginTransmission(112); // transmit to device #112 (0x70) + // the address specified in the datasheet is 224 (0xE0) + // but i2c adressing uses the high 7 bits so it's 112 + Wire.write(byte(0x00)); // sets register pointer to the command register (0x00) + Wire.write(byte(0x50)); // command sensor to measure in "inches" (0x50) + // use 0x51 for centimeters + // use 0x52 for ping microseconds + Wire.endTransmission(); // stop transmitting + + // step 2: wait for readings to happen + delay(70); // datasheet suggests at least 65 milliseconds + + // step 3: instruct sensor to return a particular echo reading + Wire.beginTransmission(112); // transmit to device #112 + Wire.write(byte(0x02)); // sets register pointer to echo #1 register (0x02) + Wire.endTransmission(); // stop transmitting + + // step 4: request reading from sensor + Wire.requestFrom(112, 2); // request 2 bytes from slave device #112 + + // step 5: receive reading from sensor + if (2 <= Wire.available()) // if two bytes were received + { + reading = Wire.read(); // receive high byte (overwrites previous reading) + reading = reading << 8; // shift high byte to be high 8 bits + reading |= Wire.read(); // receive low byte as lower 8 bits + Serial.println(reading); // print the reading + } + + delay(250); // wait a bit since people have to read the output :) +} + + +/* + +// The following code changes the address of a Devantech Ultrasonic Range Finder (SRF10 or SRF08) +// usage: changeAddress(0x70, 0xE6); + +void changeAddress(byte oldAddress, byte newAddress) +{ + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(byte(0xA0)); + Wire.endTransmission(); + + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(byte(0xAA)); + Wire.endTransmission(); + + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(byte(0xA5)); + Wire.endTransmission(); + + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(newAddress); + Wire.endTransmission(); +} + +*/ diff --git a/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino new file mode 100644 index 0000000..4d1580a --- /dev/null +++ b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino @@ -0,0 +1,39 @@ +// I2C Digital Potentiometer +// by Nicholas Zambetti <http://www.zambetti.com> +// and Shawn Bonkowski <http://people.interaction-ivrea.it/s.bonkowski/> + +// Demonstrates use of the Wire library +// Controls AD5171 digital potentiometer via I2C/TWI + +// Created 31 March 2006 + +// This example code is in the public domain. + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) +} + +byte val = 0; + +void loop() +{ + Wire.beginTransmission(44); // transmit to device #44 (0x2c) + // device address is specified in datasheet + Wire.write(byte(0x00)); // sends instruction byte + Wire.write(val); // sends potentiometer value byte + Wire.endTransmission(); // stop transmitting + + val++; // increment value + if (val == 64) // if reached 64th position (max) + { + val = 0; // start over from lowest value + } + delay(500); +} + diff --git a/libraries/Wire/examples/master_reader/master_reader.ino b/libraries/Wire/examples/master_reader/master_reader.ino new file mode 100644 index 0000000..74f0155 --- /dev/null +++ b/libraries/Wire/examples/master_reader/master_reader.ino @@ -0,0 +1,32 @@ +// Wire Master Reader +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Reads data from an I2C/TWI slave device +// Refer to the "Wire Slave Sender" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) + Serial.begin(9600); // start serial for output +} + +void loop() +{ + Wire.requestFrom(2, 6); // request 6 bytes from slave device #2 + + while (Wire.available()) // slave may send less than requested + { + char c = Wire.read(); // receive a byte as character + Serial.print(c); // print the character + } + + delay(500); +} diff --git a/libraries/Wire/examples/master_writer/master_writer.ino b/libraries/Wire/examples/master_writer/master_writer.ino new file mode 100644 index 0000000..482e922 --- /dev/null +++ b/libraries/Wire/examples/master_writer/master_writer.ino @@ -0,0 +1,31 @@ +// Wire Master Writer +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Writes data to an I2C/TWI slave device +// Refer to the "Wire Slave Receiver" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) +} + +byte x = 0; + +void loop() +{ + Wire.beginTransmission(4); // transmit to device #4 + Wire.write("x is "); // sends five bytes + Wire.write(x); // sends one byte + Wire.endTransmission(); // stop transmitting + + x++; + delay(500); +} diff --git a/libraries/Wire/examples/slave_receiver/slave_receiver.ino b/libraries/Wire/examples/slave_receiver/slave_receiver.ino new file mode 100644 index 0000000..15eff9a --- /dev/null +++ b/libraries/Wire/examples/slave_receiver/slave_receiver.ino @@ -0,0 +1,38 @@ +// Wire Slave Receiver +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Receives data as an I2C/TWI slave device +// Refer to the "Wire Master Writer" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(4); // join i2c bus with address #4 + Wire.onReceive(receiveEvent); // register event + Serial.begin(9600); // start serial for output +} + +void loop() +{ + delay(100); +} + +// function that executes whenever data is received from master +// this function is registered as an event, see setup() +void receiveEvent(int howMany) +{ + while (1 < Wire.available()) // loop through all but the last + { + char c = Wire.read(); // receive byte as a character + Serial.print(c); // print the character + } + int x = Wire.read(); // receive byte as an integer + Serial.println(x); // print the integer +} diff --git a/libraries/Wire/examples/slave_sender/slave_sender.ino b/libraries/Wire/examples/slave_sender/slave_sender.ino new file mode 100644 index 0000000..4437ab1 --- /dev/null +++ b/libraries/Wire/examples/slave_sender/slave_sender.ino @@ -0,0 +1,32 @@ +// Wire Slave Sender +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Sends data as an I2C/TWI slave device +// Refer to the "Wire Master Reader" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(2); // join i2c bus with address #2 + Wire.onRequest(requestEvent); // register event +} + +void loop() +{ + delay(100); +} + +// function that executes whenever data is requested by master +// this function is registered as an event, see setup() +void requestEvent() +{ + Wire.write("hello "); // respond with message of 6 bytes + // as expected by master +} diff --git a/libraries/Wire/keywords.txt b/libraries/Wire/keywords.txt new file mode 100644 index 0000000..12f129b --- /dev/null +++ b/libraries/Wire/keywords.txt @@ -0,0 +1,31 @@ +####################################### +# Syntax Coloring Map For Wire +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +beginTransmission KEYWORD2 +endTransmission KEYWORD2 +requestFrom KEYWORD2 +send KEYWORD2 +receive KEYWORD2 +onReceive KEYWORD2 +onRequest KEYWORD2 + +####################################### +# Instances (KEYWORD2) +####################################### + +Wire KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/Wire/utility/twi.c b/libraries/Wire/utility/twi.c new file mode 100644 index 0000000..201d7d1 --- /dev/null +++ b/libraries/Wire/utility/twi.c @@ -0,0 +1,527 @@ +/* + twi.c - TWI/I2C library for Wiring & Arduino + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts +*/ + +#include <math.h> +#include <stdlib.h> +#include <inttypes.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <compat/twi.h> +#include "Arduino.h" // for digitalWrite + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#include "pins_arduino.h" +#include "twi.h" + +static volatile uint8_t twi_state; +static volatile uint8_t twi_slarw; +static volatile uint8_t twi_sendStop; // should the transaction end with a stop +static volatile uint8_t twi_inRepStart; // in the middle of a repeated start + +static void (*twi_onSlaveTransmit)(void); +static void (*twi_onSlaveReceive)(uint8_t*, int); + +static uint8_t twi_masterBuffer[TWI_BUFFER_LENGTH]; +static volatile uint8_t twi_masterBufferIndex; +static volatile uint8_t twi_masterBufferLength; + +static uint8_t twi_txBuffer[TWI_BUFFER_LENGTH]; +static volatile uint8_t twi_txBufferIndex; +static volatile uint8_t twi_txBufferLength; + +static uint8_t twi_rxBuffer[TWI_BUFFER_LENGTH]; +static volatile uint8_t twi_rxBufferIndex; + +static volatile uint8_t twi_error; + +/* + * Function twi_init + * Desc readys twi pins and sets twi bitrate + * Input none + * Output none + */ +void twi_init(void) +{ + // initialize state + twi_state = TWI_READY; + twi_sendStop = true; // default value + twi_inRepStart = false; + + // activate internal pullups for twi. + digitalWrite(SDA, 1); + digitalWrite(SCL, 1); + + // initialize twi prescaler and bit rate + cbi(TWSR, TWPS0); + cbi(TWSR, TWPS1); + TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; + + /* twi bit rate formula from atmega128 manual pg 204 + SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR)) + note: TWBR should be 10 or higher for master mode + It is 72 for a 16mhz Wiring board with 100kHz TWI */ + + // enable twi module, acks, and twi interrupt + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA); +} + +/* + * Function twi_slaveInit + * Desc sets slave address and enables interrupt + * Input none + * Output none + */ +void twi_setAddress(uint8_t address) +{ + // set twi slave address (skip over TWGCE bit) + TWAR = address << 1; +} + +/* + * Function twi_readFrom + * Desc attempts to become twi bus master and read a + * series of bytes from a device on the bus + * Input address: 7bit i2c device address + * data: pointer to byte array + * length: number of bytes to read into array + * sendStop: Boolean indicating whether to send a stop at the end + * Output number of bytes read + */ +uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length, uint8_t sendStop) +{ + uint8_t i; + + // ensure data will fit into buffer + if(TWI_BUFFER_LENGTH < length){ + return 0; + } + + // wait until twi is ready, become master receiver + while(TWI_READY != twi_state){ + continue; + } + twi_state = TWI_MRX; + twi_sendStop = sendStop; + // reset error state (0xFF.. no error occured) + twi_error = 0xFF; + + // initialize buffer iteration vars + twi_masterBufferIndex = 0; + twi_masterBufferLength = length-1; // This is not intuitive, read on... + // On receive, the previously configured ACK/NACK setting is transmitted in + // response to the received byte before the interrupt is signalled. + // Therefor we must actually set NACK when the _next_ to last byte is + // received, causing that NACK to be sent in response to receiving the last + // expected byte of data. + + // build sla+w, slave device address + w bit + twi_slarw = TW_READ; + twi_slarw |= address << 1; + + if (true == twi_inRepStart) { + // if we're in the repeated start state, then we've already sent the start, + // (@@@ we hope), and the TWI statemachine is just waiting for the address byte. + // We need to remove ourselves from the repeated start state before we enable interrupts, + // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning + // up. Also, don't enable the START interrupt. There may be one pending from the + // repeated start that we sent outselves, and that would really confuse things. + twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR + TWDR = twi_slarw; + TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START + } + else + // send start condition + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA); + + // wait for read operation to complete + while(TWI_MRX == twi_state){ + continue; + } + + if (twi_masterBufferIndex < length) + length = twi_masterBufferIndex; + + // copy twi buffer to data + for(i = 0; i < length; ++i){ + data[i] = twi_masterBuffer[i]; + } + + return length; +} + +/* + * Function twi_writeTo + * Desc attempts to become twi bus master and write a + * series of bytes to a device on the bus + * Input address: 7bit i2c device address + * data: pointer to byte array + * length: number of bytes in array + * wait: boolean indicating to wait for write or not + * sendStop: boolean indicating whether or not to send a stop at the end + * Output 0 .. success + * 1 .. length to long for buffer + * 2 .. address send, NACK received + * 3 .. data send, NACK received + * 4 .. other twi error (lost bus arbitration, bus error, ..) + */ +uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait, uint8_t sendStop) +{ + uint8_t i; + + // ensure data will fit into buffer + if(TWI_BUFFER_LENGTH < length){ + return 1; + } + + // wait until twi is ready, become master transmitter + while(TWI_READY != twi_state){ + continue; + } + twi_state = TWI_MTX; + twi_sendStop = sendStop; + // reset error state (0xFF.. no error occured) + twi_error = 0xFF; + + // initialize buffer iteration vars + twi_masterBufferIndex = 0; + twi_masterBufferLength = length; + + // copy data to twi buffer + for(i = 0; i < length; ++i){ + twi_masterBuffer[i] = data[i]; + } + + // build sla+w, slave device address + w bit + twi_slarw = TW_WRITE; + twi_slarw |= address << 1; + + // if we're in a repeated start, then we've already sent the START + // in the ISR. Don't do it again. + // + if (true == twi_inRepStart) { + // if we're in the repeated start state, then we've already sent the start, + // (@@@ we hope), and the TWI statemachine is just waiting for the address byte. + // We need to remove ourselves from the repeated start state before we enable interrupts, + // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning + // up. Also, don't enable the START interrupt. There may be one pending from the + // repeated start that we sent outselves, and that would really confuse things. + twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR + TWDR = twi_slarw; + TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START + } + else + // send start condition + TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE) | _BV(TWSTA); // enable INTs + + // wait for write operation to complete + while(wait && (TWI_MTX == twi_state)){ + continue; + } + + if (twi_error == 0xFF) + return 0; // success + else if (twi_error == TW_MT_SLA_NACK) + return 2; // error: address send, nack received + else if (twi_error == TW_MT_DATA_NACK) + return 3; // error: data send, nack received + else + return 4; // other twi error +} + +/* + * Function twi_transmit + * Desc fills slave tx buffer with data + * must be called in slave tx event callback + * Input data: pointer to byte array + * length: number of bytes in array + * Output 1 length too long for buffer + * 2 not slave transmitter + * 0 ok + */ +uint8_t twi_transmit(const uint8_t* data, uint8_t length) +{ + uint8_t i; + + // ensure data will fit into buffer + if(TWI_BUFFER_LENGTH < length){ + return 1; + } + + // ensure we are currently a slave transmitter + if(TWI_STX != twi_state){ + return 2; + } + + // set length and copy data into tx buffer + twi_txBufferLength = length; + for(i = 0; i < length; ++i){ + twi_txBuffer[i] = data[i]; + } + + return 0; +} + +/* + * Function twi_attachSlaveRxEvent + * Desc sets function called before a slave read operation + * Input function: callback function to use + * Output none + */ +void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) ) +{ + twi_onSlaveReceive = function; +} + +/* + * Function twi_attachSlaveTxEvent + * Desc sets function called before a slave write operation + * Input function: callback function to use + * Output none + */ +void twi_attachSlaveTxEvent( void (*function)(void) ) +{ + twi_onSlaveTransmit = function; +} + +/* + * Function twi_reply + * Desc sends byte or readys receive line + * Input ack: byte indicating to ack or to nack + * Output none + */ +void twi_reply(uint8_t ack) +{ + // transmit master read ready signal, with or without ack + if(ack){ + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA); + }else{ + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT); + } +} + +/* + * Function twi_stop + * Desc relinquishes bus master status + * Input none + * Output none + */ +void twi_stop(void) +{ + // send stop condition + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO); + + // wait for stop condition to be exectued on bus + // TWINT is not set after a stop condition! + while(TWCR & _BV(TWSTO)){ + continue; + } + + // update twi state + twi_state = TWI_READY; +} + +/* + * Function twi_releaseBus + * Desc releases bus control + * Input none + * Output none + */ +void twi_releaseBus(void) +{ + // release bus + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT); + + // update twi state + twi_state = TWI_READY; +} + +ISR(TWI_vect) +{ + switch(TW_STATUS){ + // All Master + case TW_START: // sent start condition + case TW_REP_START: // sent repeated start condition + // copy device address and r/w bit to output register and ack + TWDR = twi_slarw; + twi_reply(1); + break; + + // Master Transmitter + case TW_MT_SLA_ACK: // slave receiver acked address + case TW_MT_DATA_ACK: // slave receiver acked data + // if there is data to send, send it, otherwise stop + if(twi_masterBufferIndex < twi_masterBufferLength){ + // copy data to output register and ack + TWDR = twi_masterBuffer[twi_masterBufferIndex++]; + twi_reply(1); + }else{ + if (twi_sendStop) + twi_stop(); + else { + twi_inRepStart = true; // we're gonna send the START + // don't enable the interrupt. We'll generate the start, but we + // avoid handling the interrupt until we're in the next transaction, + // at the point where we would normally issue the start. + TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ; + twi_state = TWI_READY; + } + } + break; + case TW_MT_SLA_NACK: // address sent, nack received + twi_error = TW_MT_SLA_NACK; + twi_stop(); + break; + case TW_MT_DATA_NACK: // data sent, nack received + twi_error = TW_MT_DATA_NACK; + twi_stop(); + break; + case TW_MT_ARB_LOST: // lost bus arbitration + twi_error = TW_MT_ARB_LOST; + twi_releaseBus(); + break; + + // Master Receiver + case TW_MR_DATA_ACK: // data received, ack sent + // put byte into buffer + twi_masterBuffer[twi_masterBufferIndex++] = TWDR; + case TW_MR_SLA_ACK: // address sent, ack received + // ack if more bytes are expected, otherwise nack + if(twi_masterBufferIndex < twi_masterBufferLength){ + twi_reply(1); + }else{ + twi_reply(0); + } + break; + case TW_MR_DATA_NACK: // data received, nack sent + // put final byte into buffer + twi_masterBuffer[twi_masterBufferIndex++] = TWDR; + if (twi_sendStop) + twi_stop(); + else { + twi_inRepStart = true; // we're gonna send the START + // don't enable the interrupt. We'll generate the start, but we + // avoid handling the interrupt until we're in the next transaction, + // at the point where we would normally issue the start. + TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ; + twi_state = TWI_READY; + } + break; + case TW_MR_SLA_NACK: // address sent, nack received + twi_stop(); + break; + // TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case + + // Slave Receiver + case TW_SR_SLA_ACK: // addressed, returned ack + case TW_SR_GCALL_ACK: // addressed generally, returned ack + case TW_SR_ARB_LOST_SLA_ACK: // lost arbitration, returned ack + case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack + // enter slave receiver mode + twi_state = TWI_SRX; + // indicate that rx buffer can be overwritten and ack + twi_rxBufferIndex = 0; + twi_reply(1); + break; + case TW_SR_DATA_ACK: // data received, returned ack + case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack + // if there is still room in the rx buffer + if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){ + // put byte in buffer and ack + twi_rxBuffer[twi_rxBufferIndex++] = TWDR; + twi_reply(1); + }else{ + // otherwise nack + twi_reply(0); + } + break; + case TW_SR_STOP: // stop or repeated start condition received + // put a null char after data if there's room + if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){ + twi_rxBuffer[twi_rxBufferIndex] = '\0'; + } + // sends ack and stops interface for clock stretching + twi_stop(); + // callback to user defined callback + twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex); + // since we submit rx buffer to "wire" library, we can reset it + twi_rxBufferIndex = 0; + // ack future responses and leave slave receiver state + twi_releaseBus(); + break; + case TW_SR_DATA_NACK: // data received, returned nack + case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack + // nack back at master + twi_reply(0); + break; + + // Slave Transmitter + case TW_ST_SLA_ACK: // addressed, returned ack + case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack + // enter slave transmitter mode + twi_state = TWI_STX; + // ready the tx buffer index for iteration + twi_txBufferIndex = 0; + // set tx buffer length to be zero, to verify if user changes it + twi_txBufferLength = 0; + // request for txBuffer to be filled and length to be set + // note: user must call twi_transmit(bytes, length) to do this + twi_onSlaveTransmit(); + // if they didn't change buffer & length, initialize it + if(0 == twi_txBufferLength){ + twi_txBufferLength = 1; + twi_txBuffer[0] = 0x00; + } + // transmit first byte from buffer, fall + case TW_ST_DATA_ACK: // byte sent, ack returned + // copy data to output register + TWDR = twi_txBuffer[twi_txBufferIndex++]; + // if there is more to send, ack, otherwise nack + if(twi_txBufferIndex < twi_txBufferLength){ + twi_reply(1); + }else{ + twi_reply(0); + } + break; + case TW_ST_DATA_NACK: // received nack, we are done + case TW_ST_LAST_DATA: // received ack, but we are done already! + // ack future responses + twi_reply(1); + // leave slave receiver state + twi_state = TWI_READY; + break; + + // All + case TW_NO_INFO: // no state information + break; + case TW_BUS_ERROR: // bus error, illegal stop/start + twi_error = TW_BUS_ERROR; + twi_stop(); + break; + } +} + diff --git a/libraries/Wire/utility/twi.h b/libraries/Wire/utility/twi.h new file mode 100644 index 0000000..6526593 --- /dev/null +++ b/libraries/Wire/utility/twi.h @@ -0,0 +1,53 @@ +/* + twi.h - TWI/I2C library for Wiring & Arduino + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef twi_h +#define twi_h + + #include <inttypes.h> + + //#define ATMEGA8 + + #ifndef TWI_FREQ + #define TWI_FREQ 100000L + #endif + + #ifndef TWI_BUFFER_LENGTH + #define TWI_BUFFER_LENGTH 32 + #endif + + #define TWI_READY 0 + #define TWI_MRX 1 + #define TWI_MTX 2 + #define TWI_SRX 3 + #define TWI_STX 4 + + void twi_init(void); + void twi_setAddress(uint8_t); + uint8_t twi_readFrom(uint8_t, uint8_t*, uint8_t, uint8_t); + uint8_t twi_writeTo(uint8_t, uint8_t*, uint8_t, uint8_t, uint8_t); + uint8_t twi_transmit(const uint8_t*, uint8_t); + void twi_attachSlaveRxEvent( void (*)(uint8_t*, int) ); + void twi_attachSlaveTxEvent( void (*)(void) ); + void twi_reply(uint8_t); + void twi_stop(void); + void twi_releaseBus(void); + +#endif + |