diff options
Diffstat (limited to 'libraries')
26 files changed, 2371 insertions, 0 deletions
diff --git a/libraries/Bridge/Bridge.cpp b/libraries/Bridge/Bridge.cpp new file mode 100644 index 0000000..d6d830c --- /dev/null +++ b/libraries/Bridge/Bridge.cpp @@ -0,0 +1,230 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "Bridge.h" + +BridgeClass::BridgeClass(Stream &_stream) : index(0), stream(_stream), started(false) { + // Empty +} + +void BridgeClass::begin() { + if (started) + return; + started = true; + + // Wait for Atheros bootloader to finish startup + do { + dropAll(); + delay(1100); + } while (available()>0); + + // Bridge startup: + // - If the bridge is not running starts it safely + print(CTRL_C); + delay(250); + print(F("\n")); + delay(500); + print(F("\n")); + delay(750); + // Wait for OpenWRT message + // "Press enter to activate console" + print(F("run-bridge\n")); + delay(500); + dropAll(); + + // - If the bridge was already running previous commands + // are ignored as "invalid packets". + + // Reset the brigde + uint8_t cmd[] = {'X','X', '1','0','0'}; + uint8_t res[1]; + transfer(cmd, 5, res, 1); + if (res[0] != 0) + while (true); +} + +unsigned int BridgeClass::readMessage(uint8_t *buff, unsigned int size) { + uint8_t tmp[] = { 'm' }; + return transfer(tmp, 1, buff, size); +} + +void BridgeClass::writeMessage(const uint8_t *buff, unsigned int size) { + uint8_t cmd[] = {'M'}; + transfer(cmd, 1, buff, size, NULL, 0); +} + +void BridgeClass::writeMessage(const String& str) { + writeMessage((uint8_t*) str.c_str(), str.length()); +} + +void BridgeClass::writeJSON(const String& str) { + uint8_t cmd[] = {'J'}; + transfer(cmd, 1, (uint8_t*) str.c_str(), str.length(), NULL, 0); +} + +unsigned int BridgeClass::messageAvailable() { + uint8_t tmp[] = {'n'}; + uint8_t res[2]; + transfer(tmp, 1, res, 2); + return (res[0] << 8) + res[1]; +} + +void BridgeClass::put(const char *key, const char *value) { + // TODO: do it in a more efficient way + String cmd = "D"; + cmd += key; + cmd += "\xFE"; + cmd += value; + transfer((uint8_t*)cmd.c_str(), cmd.length()); +} + +unsigned int BridgeClass::get(const char *key, uint8_t *value, unsigned int maxlen) { + uint8_t cmd[] = {'d'}; + unsigned int l = transfer(cmd, 1, (uint8_t *)key, strlen(key), value, maxlen); + if (l < maxlen) + value[l] = 0; // Zero-terminate string + return l; +} + +void BridgeClass::crcUpdate(uint8_t c) { + CRC = CRC ^ c; + CRC = (CRC >> 8) + (CRC << 8); +} + +void BridgeClass::crcReset() { + CRC = 0xAAAA; +} + +void BridgeClass::crcWrite() { + write((char)(CRC >> 8)); + write((char)(CRC & 0xFF)); +} + +bool BridgeClass::crcCheck(uint16_t _CRC) { + return CRC == _CRC; +} + +uint16_t BridgeClass::transfer(const uint8_t *buff1, uint16_t len1, + const uint8_t *buff2, uint16_t len2, + const uint8_t *buff3, uint16_t len3, + uint8_t *rxbuff, uint16_t rxlen) +{ + uint16_t len = len1 + len2 + len3; + for ( ; ; delay(100), dropAll() /* Delay for retransmission */) { + // Send packet + crcReset(); + write((char)0xFF); // Start of packet (0xFF) + crcUpdate(0xFF); + write((char)index); // Message index + crcUpdate(index); + write((char)((len >> 8) & 0xFF)); // Message length (hi) + crcUpdate((len >> 8) & 0xFF); + write((char)(len & 0xFF)); // Message length (lo) + crcUpdate(len & 0xFF); + for (uint16_t i=0; i<len1; i++) { // Payload + write((char)buff1[i]); + crcUpdate(buff1[i]); + } + for (uint16_t i=0; i<len2; i++) { // Payload + write((char)buff2[i]); + crcUpdate(buff2[i]); + } + for (uint16_t i=0; i<len3; i++) { // Payload + write((char)buff3[i]); + crcUpdate(buff3[i]); + } + crcWrite(); // CRC + + // Wait for ACK in 100ms + if (timedRead(100) != 0xFF) + continue; + crcReset(); + crcUpdate(0xFF); + + // Check packet index + if (timedRead(5) != index) + continue; + crcUpdate(index); + + // Recv len + int lh = timedRead(5); + if (lh < 0) + continue; + crcUpdate(lh); + int ll = timedRead(5); + if (ll < 0) + continue; + crcUpdate(ll); + uint16_t l = lh; + l <<= 8; + l += ll; + + // Recv data + for (uint16_t i=0; i<l; i++) { + int c = timedRead(5); + if (c < 0) + continue; + // Cut received data if rxbuffer is too small + if (i < rxlen) + rxbuff[i] = c; + crcUpdate(c); + } + + // Check CRC + int crc_hi = timedRead(5); + if (crc_hi < 0) + continue; + int crc_lo = timedRead(5); + if (crc_lo < 0) + continue; + if (!crcCheck((crc_hi<<8)+crc_lo)) + continue; + + // Increase index + index++; + + // Return bytes received + if (l > rxlen) + return rxlen; + return l; + } +} + +int BridgeClass::timedRead(unsigned int timeout) { + int c; + unsigned long _startMillis = millis(); + do { + c = read(); + if (c >= 0) return c; + } while(millis() - _startMillis < timeout); + return -1; // -1 indicates timeout +} + +void BridgeClass::dropAll() { + while (available() > 0) { + read(); + } +} + +// Bridge instance +#ifdef __AVR_ATmega32U4__ + // Leonardo variants (where HardwareSerial is Serial1) + SerialBridgeClass Bridge(Serial1); +#else + SerialBridgeClass Bridge(Serial); +#endif diff --git a/libraries/Bridge/Bridge.h b/libraries/Bridge/Bridge.h new file mode 100644 index 0000000..f606492 --- /dev/null +++ b/libraries/Bridge/Bridge.h @@ -0,0 +1,109 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef BRIDGE_H_ +#define BRIDGE_H_ + +#include <Arduino.h> +#include <Stream.h> + +class BridgeClass: public Stream { +public: + BridgeClass(Stream &_stream); + void begin(); + + // Methods to handle mailbox messages + unsigned int readMessage(uint8_t *buffer, unsigned int size); + void writeMessage(const uint8_t *buffer, unsigned int size); + void writeMessage(const String& str); + void writeJSON(const String& str); + unsigned int messageAvailable(); + + // Methods to handle key/value datastore + void put(const char *key, const char *value); + unsigned int get(const char *key, uint8_t *buff, unsigned int size); + unsigned int get(const char *key, char *value, unsigned int maxlen) + { get(key, reinterpret_cast<uint8_t *>(value), maxlen); } + + // Print methods (proxy to "stream" object) [CM: are these really needed?] + size_t write(uint8_t c) { return stream.write(c); } + size_t write(const uint8_t *buffer, size_t size) + { return stream.write(buffer, size); } + + // Stream methods (proxy to "stream" object) [CM: are these really needed?] + int available() { return stream.available(); } + int read() { return stream.read(); } + int peek() { return stream.peek(); } + void flush() { stream.flush(); } + + // Trasnfer a frame (with error correction and response) + uint16_t transfer(const uint8_t *buff1, uint16_t len1, + const uint8_t *buff2, uint16_t len2, + const uint8_t *buff3, uint16_t len3, + uint8_t *rxbuff, uint16_t rxlen); + // multiple inline versions of the same function to allow efficient frame concatenation + uint16_t transfer(const uint8_t *buff1, uint16_t len1) + { return transfer(buff1, len1, NULL, 0); } + uint16_t transfer(const uint8_t *buff1, uint16_t len1, + uint8_t *rxbuff, uint16_t rxlen) + { return transfer(buff1, len1, NULL, 0, rxbuff, rxlen); } + uint16_t transfer(const uint8_t *buff1, uint16_t len1, + const uint8_t *buff2, uint16_t len2, + uint8_t *rxbuff, uint16_t rxlen) + { return transfer(buff1, len1, buff2, len2, NULL, 0, rxbuff, rxlen); } +private: + uint8_t index; + int timedRead(unsigned int timeout); + void dropAll(); + +private: + void crcUpdate(uint8_t c); + void crcReset(); + void crcWrite(); + bool crcCheck(uint16_t _CRC); + uint16_t CRC; + +private: + static const char CTRL_C = 3; + Stream &stream; + bool started; +}; + +// This subclass uses a serial port Stream +class SerialBridgeClass : public BridgeClass { +public: + SerialBridgeClass(HardwareSerial &_serial) + : BridgeClass(_serial), serial(_serial) { + // Empty + } + + void begin() { + serial.begin(115200); + BridgeClass::begin(); + } + +private: + HardwareSerial &serial; +}; + +extern SerialBridgeClass Bridge; + +#endif /* BRIDGE_H_ */ + +#include <Console.h> +#include <Process.h> diff --git a/libraries/Bridge/Console.cpp b/libraries/Bridge/Console.cpp new file mode 100644 index 0000000..8607421 --- /dev/null +++ b/libraries/Bridge/Console.cpp @@ -0,0 +1,153 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <Console.h> + +// Default constructor uses global Bridge instance +ConsoleClass::ConsoleClass() : + bridge(Bridge), inBuffered(0), inReadPos(0), inBuffer(NULL), + autoFlush(true) +{ + // Empty +} + +// Constructor with a user provided BridgeClass instance +ConsoleClass::ConsoleClass(BridgeClass &_b) : + bridge(_b), inBuffered(0), inReadPos(0), inBuffer(NULL), + autoFlush(true) +{ + // Empty +} + +ConsoleClass::~ConsoleClass() { + end(); +} + +size_t ConsoleClass::write(uint8_t c) { + if (autoFlush) { + uint8_t tmp[] = { 'P', c }; + bridge.transfer(tmp, 2); + return 1; + } else { + outBuffer[outBuffered++] = c; + if (outBuffered == outBufferSize) + flush(); + } +} + +size_t ConsoleClass::write(const uint8_t *buff, size_t size) { + if (autoFlush) { + // TODO: do it in a more efficient way + uint8_t *tmp = new uint8_t[size+1]; + tmp[0] = 'P'; + memcpy(tmp+1, buff, size); + bridge.transfer(tmp, size+1); + delete[] tmp; + return size; + } else { + while (size > 0) { + outBuffer[outBuffered++] = *buff++; + size--; + if (outBuffered == outBufferSize) + flush(); + } + } +} + +void ConsoleClass::flush() { + if (autoFlush) + return; + + bridge.transfer(outBuffer, outBuffered); + outBuffered = 1; +} + +void ConsoleClass::noBuffer() { + if (autoFlush) + return; + delete[] outBuffer; + autoFlush = true; +} + +void ConsoleClass::buffer(uint8_t size) { + noBuffer(); + if (size==0) + return; + outBuffer = new uint8_t[size+1]; + outBuffer[0] = 'P'; // WRITE tag + outBufferSize = size+1; + outBuffered = 1; + autoFlush = false; +} + +bool ConsoleClass::connected() { + uint8_t tmp = 'a'; + bridge.transfer(&tmp, 1, &tmp, 1); + return tmp==1; +} + +int ConsoleClass::available() { + // Look if there is new data available + doBuffer(); + return inBuffered; +} + +int ConsoleClass::read() { + doBuffer(); + if (inBuffered == 0) + return -1; // no chars available + else { + inBuffered--; + return inBuffer[inReadPos++]; + } +} + +int ConsoleClass::peek() { + doBuffer(); + if (inBuffered == 0) + return -1; // no chars available + else + return inBuffer[inReadPos]; +} + +void ConsoleClass::doBuffer() { + // If there are already char in buffer exit + if (inBuffered > 0) + return; + + // Try to buffer up to 32 characters + inReadPos = 0; + uint8_t tmp[] = { 'p', BUFFER_SIZE }; + inBuffered = bridge.transfer(tmp, 2, inBuffer, BUFFER_SIZE); +} + +void ConsoleClass::begin() { + bridge.begin(); + end(); + inBuffer = new uint8_t[BUFFER_SIZE]; +} + +void ConsoleClass::end() { + noBuffer(); + if (inBuffer) { + delete[] inBuffer; + inBuffer = NULL; + } +} + +ConsoleClass Console; diff --git a/libraries/Bridge/Console.h b/libraries/Bridge/Console.h new file mode 100644 index 0000000..73a9739 --- /dev/null +++ b/libraries/Bridge/Console.h @@ -0,0 +1,69 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef CONSOLE_H_ +#define CONSOLE_H_ + +#include <Bridge.h> + +class ConsoleClass : public Stream { +public: + // Default constructor uses global Bridge instance + ConsoleClass(); + // Constructor with a user provided BridgeClass instance + ConsoleClass(BridgeClass &_b); + ~ConsoleClass(); + + void begin(); + void end(); + + void buffer(uint8_t size); + void noBuffer(); + + bool connected(); + + // Stream methods + // (read from console socket) + int available(); + int read(); + int peek(); + // (write to console socket) + size_t write(uint8_t); + size_t write(const uint8_t *buffer, size_t size); + void flush(); + + operator bool () { return connected(); } + +private: + BridgeClass &bridge; + + void doBuffer(); + uint8_t inBuffered; + uint8_t inReadPos; + static const int BUFFER_SIZE = 32; + uint8_t *inBuffer; + + bool autoFlush; + uint8_t outBuffered; + uint8_t outBufferSize; + uint8_t *outBuffer; +}; + +extern ConsoleClass Console; + +#endif diff --git a/libraries/Bridge/FileIO.cpp b/libraries/Bridge/FileIO.cpp new file mode 100644 index 0000000..0fab55f --- /dev/null +++ b/libraries/Bridge/FileIO.cpp @@ -0,0 +1,203 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <FileIO.h> + +File::File(BridgeClass &b) : mode(255), bridge(b) { + // Empty +} + +File::File(const char *_filename, uint8_t _mode, BridgeClass &b) : mode(_mode), bridge(b) { + filename = _filename; + char modes[] = {'r','w','a'}; + uint8_t cmd[] = {'F', modes[mode]}; + uint8_t res[2]; + bridge.transfer(cmd, 2, (uint8_t*)filename.c_str(), filename.length(), res, 2); + if (res[0] != 0) { // res[0] contains error code + mode = 255; // In case of error keep the file closed + return; + } + handle = res[1]; + buffered = 0; +} + +File::operator bool() { + return (mode != 255); +} + +File::~File() { + close(); +} + +size_t File::write(uint8_t c) { + return write(&c, 1); +} + +size_t File::write(const uint8_t *buf, size_t size) { + if (mode == 255) + return -1; + uint8_t cmd[] = {'g', handle}; + uint8_t res[1]; + bridge.transfer(cmd, 2, buf, size, res, 1); + if (res[0] != 0) // res[0] contains error code + return -res[0]; + return size; +} + +int File::read() { + doBuffer(); + if (buffered == 0) + return -1; // no chars available + else { + buffered--; + return buffer[readPos++]; + } +} + +int File::peek() { + doBuffer(); + if (buffered == 0) + return -1; // no chars available + else + return buffer[readPos]; +} + +boolean File::seek(uint32_t position) { + uint8_t cmd[] = { + 's', + handle, + (position >> 24) & 0xFF, + (position >> 16) & 0xFF, + (position >> 8) & 0xFF, + position & 0xFF + }; + uint8_t res[1]; + bridge.transfer(cmd, 6, res, 1); + if (res[0]==0) { + // If seek succeed then flush buffers + buffered = 0; + return true; + } + return false; +} + +uint32_t File::position() { + uint8_t cmd[] = {'S', handle}; + uint8_t res[5]; + bridge.transfer(cmd, 2, res, 5); + //err = res[0]; // res[0] contains error code + uint32_t pos = res[1] << 24; + pos += res[2] << 16; + pos += res[3] << 8; + pos += res[4]; + return pos - buffered; +} + +void File::doBuffer() { + // If there are already char in buffer exit + if (buffered > 0) + return; + + // Try to buffer up to 32 characters + readPos = 0; + uint8_t cmd[] = {'G', handle, sizeof(buffer)}; + buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)) - 1; + //err = buff[0]; // First byte is error code + if (buffered>0) { + // Shift the reminder of buffer + for (uint8_t i=0; i<buffered; i++) + buffer[i] = buffer[i+1]; + } +} + +int File::available() { + // Look if there is new data available + doBuffer(); + return buffered; +} + +void File::flush() { +} + +//int read(void *buf, uint16_t nbyte) + +//uint32_t size() + +void File::close() { + if (mode == 255) + return; + uint8_t cmd[] = {'f', handle}; + bridge.transfer(cmd, 2); + mode = 255; +} + +const char *File::name() { + return filename.c_str(); +} + +//boolean isDirectory(void) +//File openNextFile(uint8_t mode = O_RDONLY); +//void rewindDirectory(void) + + + + + + +boolean FileSystemClass::begin() { + return true; +} + +File FileSystemClass::open(const char *filename, uint8_t mode) { + return File(filename, mode); +} + +boolean FileSystemClass::exists(const char *filepath) { + Process ls; + ls.begin("ls"); + ls.addParameter(filepath); + int res = ls.run(); + return (res == 0); +} + +boolean FileSystemClass::mkdir(const char *filepath) { + Process mk; + mk.begin("mkdir"); + mk.addParameter("-p"); + mk.addParameter(filepath); + int res = mk.run(); + return (res == 0); +} + +boolean FileSystemClass::remove(const char *filepath) { + Process rm; + rm.begin("rm"); + rm.addParameter(filepath); + int res = rm.run(); + return (res == 0); +} + +boolean FileSystemClass::rmdir(const char *filepath) { + Process rm; + rm.begin("rmdir"); + rm.addParameter(filepath); + int res = rm.run(); + return (res == 0); +} + +FileSystemClass FileSystem; diff --git a/libraries/Bridge/FileIO.h b/libraries/Bridge/FileIO.h new file mode 100644 index 0000000..629e5f2 --- /dev/null +++ b/libraries/Bridge/FileIO.h @@ -0,0 +1,101 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef __FILEIO_H__ +#define __FILEIO_H__ + +#include <Process.h> + +#define FILE_READ 0 +#define FILE_WRITE 1 +#define FILE_APPEND 2 + +class File : public Stream { + +public: + File(BridgeClass &b = Bridge); + File(const char *_filename, uint8_t _mode, BridgeClass &b = Bridge); + ~File(); + + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *buf, size_t size); + virtual int read(); + virtual int peek(); + virtual int available(); + virtual void flush(); + int read(void *buf, uint16_t nbyte); + boolean seek(uint32_t pos); + uint32_t position(); + uint32_t size(); + void close(); + operator bool(); + const char * name(); + + boolean iFileSystemirectory(void); + File openNextFile(uint8_t mode = FILE_READ); + void rewindDirectory(void); + + //using Print::write; + +private: + void doBuffer(); + uint8_t buffered; + uint8_t readPos; + static const int BUFFER_SIZE = 64; + uint8_t buffer[BUFFER_SIZE]; + +private: + BridgeClass &bridge; + String filename; + uint8_t mode; + uint8_t handle; +}; + +class FileSystemClass { +public: + FileSystemClass() : bridge(Bridge) { } + FileSystemClass(BridgeClass &_b) : bridge(_b) { } + + boolean begin(); + + // Open the specified file/directory with the supplied mode (e.g. read or + // write, etc). Returns a File object for interacting with the file. + // Note that currently only one file can be open at a time. + File open(const char *filename, uint8_t mode = FILE_READ); + + // Methods to determine if the requested file path exists. + boolean exists(const char *filepath); + + // Create the requested directory heirarchy--if intermediate directories + // do not exist they will be created. + boolean mkdir(const char *filepath); + + // Delete the file. + boolean remove(const char *filepath); + + boolean rmdir(const char *filepath); + +private: + friend class File; + + BridgeClass &bridge; +}; + +extern FileSystemClass FileSystem; + +#endif diff --git a/libraries/Bridge/HttpClient.cpp b/libraries/Bridge/HttpClient.cpp new file mode 100644 index 0000000..510af38 --- /dev/null +++ b/libraries/Bridge/HttpClient.cpp @@ -0,0 +1,53 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "HttpClient.h" + +unsigned int HttpClient::get(String &url) { + begin("curl"); + addParameter(url); + return run(); +} + +unsigned int HttpClient::get(const char *url) { + begin("curl"); + addParameter(url); + return run(); +} + +void HttpClient::getAsynchronously(String &url) { + begin("curl"); + addParameter(url); + runAsynchronously(); +} + +void HttpClient::getAsynchronously(const char *url) { + begin("curl"); + addParameter(url); + runAsynchronously(); +} + +boolean HttpClient::ready() { + return running(); +} + +unsigned int HttpClient::getResult() { + return exitValue(); +} + + diff --git a/libraries/Bridge/HttpClient.h b/libraries/Bridge/HttpClient.h new file mode 100644 index 0000000..940a66d --- /dev/null +++ b/libraries/Bridge/HttpClient.h @@ -0,0 +1,36 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef HTTPCLIENT_H_ +#define HTTPCLIENT_H_ + +#include <Process.h> + +class HttpClient : public Process { +public: + + unsigned int get(String &url); + unsigned int get(const char * url); + void getAsynchronously(String &url); + void getAsynchronously(const char * url); + boolean ready(); + unsigned int getResult(); + +}; + +#endif /* HTTPCLIENT_H_ */ diff --git a/libraries/Bridge/Process.cpp b/libraries/Bridge/Process.cpp new file mode 100644 index 0000000..219922a --- /dev/null +++ b/libraries/Bridge/Process.cpp @@ -0,0 +1,142 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <Process.h> + +Process::~Process() { + close(); +} + +size_t Process::write(uint8_t c) { + uint8_t cmd[] = {'I', handle, c}; + bridge.transfer(cmd, 3); + return 1; +} + +void Process::flush() { +} + +int Process::available() { + // Look if there is new data available + doBuffer(); + return buffered; +} + +int Process::read() { + doBuffer(); + if (buffered == 0) + return -1; // no chars available + else { + buffered--; + return buffer[readPos++]; + } +} + +int Process::peek() { + doBuffer(); + if (buffered == 0) + return -1; // no chars available + else + return buffer[readPos]; +} + +void Process::doBuffer() { + // If there are already char in buffer exit + if (buffered > 0) + return; + + // Try to buffer up to 32 characters + readPos = 0; + uint8_t cmd[] = {'O', handle, sizeof(buffer)}; + buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)); +} + +void Process::begin(const String &command) { + close(); + cmdline = new String(command); +} + +void Process::addParameter(const String ¶m) { + *cmdline += "\xFE"; + *cmdline += param; +} + +void Process::runAsynchronously() { + uint8_t cmd[] = {'R'}; + uint8_t res[2]; + bridge.transfer(cmd, 1, (uint8_t*)cmdline->c_str(), cmdline->length(), res, 2); + handle = res[1]; + + delete cmdline; + cmdline = NULL; + + if (res[0]==0) // res[0] contains error code + started = true; +} + +boolean Process::running() { + uint8_t cmd[] = {'r', handle}; + uint8_t res[1]; + bridge.transfer(cmd, 2, res, 1); + return (res[0] == 1); +} + +unsigned int Process::exitValue() { + uint8_t cmd[] = {'W', handle}; + uint8_t res[2]; + bridge.transfer(cmd, 2, res, 2); + return (res[0] << 8) + res[1]; +} + +unsigned int Process::run() { + runAsynchronously(); + while (running()) + delay(100); + return exitValue(); +} + +void Process::close() { + if (started) { + uint8_t cmd[] = {'w', handle}; + bridge.transfer(cmd, 2); + } + started = false; +} + +unsigned int Process::runShellCommand(const String &command) { + runShellCommandAsynchronously(command); + while (running()) + delay(100); + return exitValue(); +} + +void Process::runShellCommandAsynchronously(const String &command) { + begin("/bin/ash"); + addParameter("-c"); + addParameter(command); + runAsynchronously(); +} + +// This method is currently unused +//static unsigned int __commandOutputAvailable(uint8_t handle) { +// uint8_t cmd[] = {'o', handle}; +// uint8_t res[1]; +// Bridge.transfer(cmd, 2, res, 1); +// return res[0]; +//} + diff --git a/libraries/Bridge/Process.h b/libraries/Bridge/Process.h new file mode 100644 index 0000000..cacf516 --- /dev/null +++ b/libraries/Bridge/Process.h @@ -0,0 +1,69 @@ +/* + Copyright (c) 2013 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef PROCESS_H_ +#define PROCESS_H_ + +#include <Bridge.h> + +class Process : public Stream { +public: + // Constructor with a user provided BridgeClass instance + Process(BridgeClass &_b = Bridge) : + bridge(_b), started(false), buffered(0), readPos(0) { } + ~Process(); + + void begin(const String &command); + void addParameter(const String ¶m); + unsigned int run(); + void runAsynchronously(); + boolean running(); + unsigned int exitValue(); + void close(); + + unsigned int runShellCommand(const String &command); + void runShellCommandAsynchronously(const String &command); + + operator bool () { return started; } + + // Stream methods + // (read from process stdout) + int available(); + int read(); + int peek(); + // (write to process stdin) + size_t write(uint8_t); + void flush(); + // TODO: add optimized function for block write + +private: + BridgeClass &bridge; + unsigned int handle; + String *cmdline; + boolean started; + +private: + void doBuffer(); + uint8_t buffered; + uint8_t readPos; + static const int BUFFER_SIZE = 64; + uint8_t buffer[BUFFER_SIZE]; + +}; + +#endif diff --git a/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino b/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino new file mode 100644 index 0000000..7833d54 --- /dev/null +++ b/libraries/Bridge/examples/BootWatcher001/BootWatcher001.ino @@ -0,0 +1,90 @@ + +/* + Arduino Yun Boot watcher + + Allows you to use the Yun's 32U4 processor as a + serial terminal for the linino processor + + Upload this to an Arduino Yun via serial (not WiFi) + then open the serial monitor at 115200 to see the boot process + of the linino processor. You can also use the serial monitor + as a basic command line interface for the linino processor using + this sketch. + + The circuit: + * Arduino Yun + + created March 2013 + by Massimo Banzi + modified 26 May 2013 + by Tom Igoe + + This example code is in the public domain. + */ + +long baud = 115200; + +// Pin 13 has an LED connected on most Arduino boards. +// give it a name: +int led = 13; +int ledState = HIGH; // whether the LED is high or low + +String bootString = ""; +int bootLineCount = 0; +boolean booting = true; + +void setup() { + Serial.begin(baud); // open serial connection to Linino + Serial1.begin(baud); // open serial connection via USB-Serial + + // initialize the digital pin as an output. + pinMode(led, OUTPUT); + digitalWrite(led, ledState); // turn the LED on (HIGH is the voltage level) + while(booting) { + listenForBoot(); + } + delay(500); +} + + +void loop() { + // After booting, become a serial terminal: + if (Serial.available()) { // got anything from USB-Serial? + char c = (char)Serial.read(); // read from USB-serial + Serial1.write(c); // write to Linino + ledState=!ledState; // invert LED state + digitalWrite(led, ledState); // toggle the LED + } + if (Serial1.available()) { // got anything from Linino? + char c = (char)Serial1.read(); // read from Linino + Serial.write(c); // write to USB-serial + } + +} + +void listenForBoot() { + char c; + if (Serial1.available()) { // got anything from Linino? + c = (char)Serial1.read(); // read from Linino + + if (c == '\n') { // clear the bootString every newline + bootLineCount++; // increment the boot line counter + Serial.println(bootLineCount); // print the count + bootString = ""; // clear the boot string + } + else { // anything other than newline, add to string + bootString += c; + } + } + + // look for the final boot string message: + if (bootString.endsWith("entered forwarding state")) { + Serial1.println(); + } + + // look for the command prompt: + if (bootString.endsWith(":/#")) { + Serial.println("Ready for action."); + booting = false; + } +} diff --git a/libraries/Bridge/examples/Bridge/Bridge.ino b/libraries/Bridge/examples/Bridge/Bridge.ino new file mode 100644 index 0000000..df1e069 --- /dev/null +++ b/libraries/Bridge/examples/Bridge/Bridge.ino @@ -0,0 +1,133 @@ + +#include <Bridge.h> + +void setup() { + pinMode(13,OUTPUT); + digitalWrite(13, LOW); + Bridge.begin(); + digitalWrite(13, HIGH); +} + +void loop() { + while (Bridge.messageAvailable()) { + uint8_t buff[64]; + int l = Bridge.readMessage(buff, 64); + process(buff, l); + } + delay(100); // Poll every 0.100s +} + +void process(uint8_t buff[], int length) { + // "digital/13/1" -> digitalWrite(13, HIGH) + // "digital/13" -> digitalRead(13) + // "analog/2/123" -> analogWrite(2, 123) + // "analog/2" -> analogRead(2) + // "mode/13/input" -> pinMode(13, INPUT) + // "mode/13/output" -> pinMode(13, OUTPUT) + + // Sanity check + if (length < 9 || length > 14) + return; + + // string terminator + buff[length] = '\0'; + + String command = String((char*)buff); + + // digital command + if (command.indexOf("digital/") == 0) { + command = command.substring(8); + digitalCommand(command); + + // analog command + } else if (command.indexOf("analog/") == 0) { + command = command.substring(7); + analogCommand(command); + + // mode command + } else if (command.indexOf("mode/") == 0) { + command = command.substring(5); + modeCommand(command); + } +} + +void digitalCommand(String command) { + int pin, value; + if (command.indexOf("/") != -1) { + pin = command.substring(0, command.indexOf("/")).toInt(); + value = command.substring(command.indexOf("/") + 1, command.length()).toInt(); + digitalWrite(pin, value); + } else { + pin = command.toInt(); + } + reportDigitalRead(pin, true); +} + +void analogCommand(String command) { + int pin, value; + if (command.indexOf("/") != -1) { + pin = command.substring(0, command.indexOf("/")).toInt(); + value = command.substring(command.indexOf("/") + 1, command.length()).toInt(); + analogWrite(pin, value); + } else { + pin = command.toInt(); + } + reportAnalogRead(pin, true); +} + +void modeCommand(String command) { + int pin; + String strValue; + pin = command.substring(0, command.indexOf("/")).toInt(); + strValue = command.substring(command.indexOf("/") + 1, command.length()); + if (strValue == "output") { + pinMode(pin, OUTPUT); + reportPinMode(pin, strValue); + } else if (strValue == "input") { + pinMode(pin, INPUT); + reportPinMode(pin, strValue); + } +} + +void reportPinMode(int pin, String mode) { + String json = "{\"pin\":"; + json += pin; + json += ", \"mode\": \""; + json += mode; + json += "\"}"; + Bridge.writeJSON(json); +} + +void reportDigitalRead(int pin, boolean dataset) { + int value = digitalRead(pin); + + String json = "{\"pin\":"; + json += pin; + json += ", \"value\": "; + json += value; + json += "}"; + Bridge.writeJSON(json); + + if (dataset) { + String key = "D"; + key += pin; + Bridge.put(key.c_str(), String(value).c_str()); + } +} + +void reportAnalogRead(int pin, boolean dataset) { + int value = analogRead(pin); + + String json = "{\"pin\":"; + json += pin; + json += ", \"value\": "; + json += value; + json += "}"; + Bridge.writeJSON(json); + + if (dataset) { + String key = "A"; + key += pin; + Bridge.put(key.c_str(), String(value).c_str()); + } +} diff --git a/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino b/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino new file mode 100644 index 0000000..4cdf4c1 --- /dev/null +++ b/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino @@ -0,0 +1,94 @@ +/* + ASCII table + + Prints out byte values in all possible formats: + * as raw binary values + * as ASCII-encoded decimal, hex, octal, and binary values + + For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII + + The circuit: No external hardware needed. + + created 2006 + by Nicholas Zambetti + modified 9 Apr 2012 + by Tom Igoe + modified 22 May 2013 + by Cristian Maglie + + This example code is in the public domain. + + <http://www.zambetti.com> + + */ + +#include <Console.h> + +void setup() { + //Initialize Console and wait for port to open: + Bridge.begin(); + Console.begin(); + + // Uncomment the following line to enable buffering: + // - better transmission speed and efficiency + // - needs to call Console.flush() to ensure that all + // transmitted data is sent + + //Console.buffer(64); + + while (!Console) { + ; // wait for Console port to connect. + } + + // prints title with ending line break + Console.println("ASCII Table ~ Character Map"); +} + +// first visible ASCIIcharacter '!' is number 33: +int thisByte = 33; +// you can also write ASCII characters in single quotes. +// for example. '!' is the same as 33, so you could also use this: +//int thisByte = '!'; + +void loop() { + // prints value unaltered, i.e. the raw binary version of the + // byte. The Console monitor interprets all bytes as + // ASCII, so 33, the first number, will show up as '!' + Console.write(thisByte); + + Console.print(", dec: "); + // prints value as string as an ASCII-encoded decimal (base 10). + // Decimal is the default format for Console.print() and Console.println(), + // so no modifier is needed: + Console.print(thisByte); + // But you can declare the modifier for decimal if you want to. + //this also works if you uncomment it: + + // Console.print(thisByte, DEC); + + Console.print(", hex: "); + // prints value as string in hexadecimal (base 16): + Console.print(thisByte, HEX); + + Console.print(", oct: "); + // prints value as string in octal (base 8); + Console.print(thisByte, OCT); + + Console.print(", bin: "); + // prints value as string in binary (base 2) + // also prints ending line break: + Console.println(thisByte, BIN); + + // if printed last visible character '~' or 126, stop: + if(thisByte == 126) { // you could also use if (thisByte == '~') { + // ensure the latest bit of data is sent + Console.flush(); + + // This loop loops forever and does nothing + while(true) { + continue; + } + } + // go on to the next character + thisByte++; +} diff --git a/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino b/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino new file mode 100644 index 0000000..7b38f03 --- /dev/null +++ b/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino @@ -0,0 +1,55 @@ +/* + Console.read() example: + read data coming from bridge using the Console.read() function + and store it in a string. + + To see the Console, pick your Yun's name and IP address in the Port menu + then open the Port Monitor. You can also see it by opening a terminal window + and typing + ssh root@ yourYunsName.local 'telnet localhost 6571' + then pressing enter. When prompted for the password, enter it. + + created 13 Jun 2013 + by Angelo Scialabba + modified 16 June 2013 + by Tom Igoe + + This example code is in the public domain. + */ + +#include <Console.h> + +String name; + +void setup() { + //Initialize Console and wait for port to open: + Bridge.begin(); + Console.begin(); + + while (!Console){ + ; // wait for Console port to connect. + } + Console.println("Hi, what's your name?"); +} + +void loop() { + if (Console.available() > 0) { + char thisChar = Console.read(); //read the next char received + //look for the newline character, this is the last character in the string + if (thisChar == '\n') { + //print text with the name received + Console.print("Hi "); + Console.print(name); + Console.println("! Nice to meet you!"); + Console.println(); + //Ask again for name and clear the old name + Console.println("Hi, what's your name?"); + name = ""; + } + else { //if the buffer is empty Cosole.read returns -1 + name += thisChar; //thisChar is int, treat him as char and add it to the name string + } + } +} + + diff --git a/libraries/Bridge/examples/Datalogger/Datalogger.ino b/libraries/Bridge/examples/Datalogger/Datalogger.ino new file mode 100644 index 0000000..dfd269f --- /dev/null +++ b/libraries/Bridge/examples/Datalogger/Datalogger.ino @@ -0,0 +1,88 @@ +/* + SD card datalogger + + This example shows how to log data from three analog sensors + to an SD card mounted on the Linux using the Bridge library. + + The circuit: + * analog sensors on analog ins 0, 1, and 2 + * SD card attached to SD card slot of the Arduino Yun + + You can remove the SD card while the Linux and the + sketch are running but becareful to don't remove it while + the system is writing on it. + + created 24 Nov 2010 + modified 9 Apr 2012 + by Tom Igoe + adapted to the Yun Bridge library 20 Jun 2013 + by Federico Vanzati + + This example code is in the public domain. + + */ + +#include <FileIO.h> +#include <Console.h> + +void setup() { + // Initialize the Bridge and the Console + Bridge.begin(); + Console.begin(); + FileSystem.begin(); + + while(!Console){ + ; // wait for Console port to connect. + } +} + + +void loop () { + // make a string that start with a timestamp for assembling the data to log: + String dataString = ""; + addTimeStamp(dataString); + dataString += " = "; + + // read three sensors and append to the string: + for (int analogPin = 0; analogPin < 3; analogPin++) { + int sensor = analogRead(analogPin); + dataString += String(sensor); + if (analogPin < 2) { + dataString += ","; + } + } + + // open the file. note that only one file can be open at a time, + // so you have to close this one before opening another. + // The FileSystem card is mounted at the following "/mnt/FileSystema1" + File dataFile = FileSystem.open("/mnt/sda1/datalog.txt", FILE_APPEND); + + // if the file is available, write to it: + if (dataFile) { + dataFile.println(dataString); + dataFile.close(); + // print to the serial port too: + Console.println(dataString); + } + // if the file isn't open, pop up an error: + else { + Console.println("error opening datalog.txt"); + } + + delay(15000); + +} + +// This function append a time stamp to the string passed as argument +void addTimeStamp(String &string) { + Process time; + time.begin("date"); + time.addParameter("+%D-%T"); + time.run(); + + while(time.available()>0) { + char c = time.read(); + if(c != '\n') + string += c; + } +} diff --git a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino new file mode 100644 index 0000000..d5bbb26 --- /dev/null +++ b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino @@ -0,0 +1,65 @@ +/* + Write to file using FileIO classes. + + This sketch demonstrate how to write file into the Yún filesystem. + A shell script file is created in /tmp, and it is executed afterwards. + + */ + +#include <FileIO.h> + +void setup() { + // Setup Bridge (needed every time we communicate with the Arduino Yún) + Bridge.begin(); + + // Setup Console + Console.begin(); + // Buffering improves Console performance, but we must remember to + // finish sending using the Console.flush() command. + Console.buffer(64); + + // Setup File IO + SD.begin(); + + // Upload script used to gain network statistics + uploadScript(); +} + +void loop() { + // Run stats script every 5 secs. + runScript(); + delay(5000); +} + +void uploadScript() { + // Write our shell script in /tmp + // Using /tmp stores the script in RAM this way we can preserve + // the limited amount of FLASH erase/write cycles + File script = SD.open("/tmp/wlan-stats.sh", FILE_WRITE); + script.print("#!/bin/sh\n"); + script.print("ifconfig wlan0 | grep \"RX bytes\" | tr ':' ' ' | awk \"{ print \\$3 \\\" \\\" \\$8 }\"\n"); + script.close(); + + // Make the script executable + Process chmod; + chmod.begin("chmod"); + chmod.addParameter("+x"); + chmod.addParameter("/tmp/wlan-stats.sh"); + chmod.run(); +} + +void runScript() { + // Launch script and show results on the console + Process myscript; + myscript.begin("/tmp/wlan-stats.sh"); + myscript.run(); + + Console.print("WiFi RX/TX bytes: "); + while (myscript.available()) { + char c = myscript.read(); + Console.print(c); + } + Console.println(); + Console.flush(); +} + diff --git a/libraries/Bridge/examples/HttpClient/HttpClient.ino b/libraries/Bridge/examples/HttpClient/HttpClient.ino new file mode 100644 index 0000000..bf5e8ff --- /dev/null +++ b/libraries/Bridge/examples/HttpClient/HttpClient.ino @@ -0,0 +1,23 @@ + +#include <HttpClient.h> + +void setup() { + pinMode(13, OUTPUT); + digitalWrite(13, LOW); + Bridge.begin(); +} + +void loop() { + HttpClient client; + client.get("http://my.server.address/file.php"); + + char c = client.read(); + if (c=='1') + digitalWrite(13, HIGH); + if (c=='0') + digitalWrite(13, LOW); + + delay(5000); +} + + diff --git a/libraries/Bridge/examples/OLDWiFiCheck/OLDWiFiCheck.ino b/libraries/Bridge/examples/OLDWiFiCheck/OLDWiFiCheck.ino new file mode 100644 index 0000000..1cb9f03 --- /dev/null +++ b/libraries/Bridge/examples/OLDWiFiCheck/OLDWiFiCheck.ino @@ -0,0 +1,53 @@ +/* + Arduino Yun Wireless Config Check + + Checks the wireless state of Arduino Yun by calling + the linux command iwconfig. + + Upload this to an Arduino Yun via serial (not WiFi) + then open the serial monitor to see the status of + your Yun's WiFi connection. If it's connected to + a wireless network, the ESSID (name) of that network + and the signal strength will appear. + + The circuit: + * Arduino Yun + + created 22 May 2013 + by Tom Igoe + + This example code is in the public domain. + */ + +#include <Process.h> + +void setup() { + Serial.begin(9600); // initialize serial communication + while(!Serial); // do nothing until the serial monitor is opened + + pinMode(13,OUTPUT); + digitalWrite(13, LOW); + Bridge.begin(); // make contact with the linux processor + digitalWrite(13, HIGH); + + delay(2000); // wait 2 seconds + + Process wifiCheck; // initialize a new process + + + wifiCheck.begin("iwconfig"); // command you want to run + wifiCheck.addParameter("wlan0"); // parameter of the command + wifiCheck.run(); // run the command + + // while there's any characters coming back from the + // process, print them to the serial monitor: + while (wifiCheck.available() > 0) { + char thisChar = wifiCheck.read(); + Serial.print(thisChar); + } +} + +void loop() { + // nothing to do here. +} + diff --git a/libraries/Bridge/examples/OLDWifiSignalStrengthIndicator/OLDWifiSignalStrengthIndicator.ino b/libraries/Bridge/examples/OLDWifiSignalStrengthIndicator/OLDWifiSignalStrengthIndicator.ino new file mode 100644 index 0000000..e0b2d1f --- /dev/null +++ b/libraries/Bridge/examples/OLDWifiSignalStrengthIndicator/OLDWifiSignalStrengthIndicator.ino @@ -0,0 +1,112 @@ +/* + Wifi Signal Strength Indicator + + This example demonstrates the use of the bridge and process libraries + to communicate between the Arduino side and the linux side of the Arduino Yun. + + The Linux script returns the strength of the wifi signal. + + The Arduino sketch uses LEDs to indicate whether the current value of + the signal strength is above, below, or the same as the last value + + The circuit: + * LEDs on pins 8, 9, and 10 + * Built-in LED on pin 13 + + The script: + The following one line script must exist in the /root directory of the + linux file system, in a file named "wifiStrength.sh", and it must be executable: + + tail -1 /proc/net/wireless | cut -c22-23 + + created 06 June 2013 + by Michael Shiloh + modified 08 June 2013 + by Tom Igoe + + This example code is in the public domain + + */ + + +#include <Process.h> + +// global variable to store the last value of the signal strength +int lastValue; + +void setup() { + // set up LED pins as outputs: + pinMode(8, OUTPUT); + pinMode(9, OUTPUT); + pinMode(10, OUTPUT); + pinMode(13,OUTPUT); + + // Indicate that you're ready by flashing pin 13 LED twice + for (int flash = 0; flash < 3; flash++) { + digitalWrite(13,HIGH); + delay(200); + digitalWrite(13,LOW); + delay(800); + } + // initialize Serial and Bridge: + Serial.begin(9600); + Bridge.begin(); + + // Indicate that setup is finished + digitalWrite(13,HIGH); +} + +void loop() { + int value = 0; // the signal strength as an integer + String result; // the result of the process as a String + Process wifiCheck; // the process itself + + + // Run the script on the linux side. Note that any word + //or text separated by a tab or space is considered + //an additional parameter: + wifiCheck.begin("ash"); + wifiCheck.addParameter("/root/wifiStrength.sh"); + wifiCheck.run(); + + // If the process has sent any characters: + while (wifiCheck.available()>0) { + result = wifiCheck.readString(); // read the result into a string + value = result.toInt(); // parse the string as an int + } + + // for debugging + Serial.print("previous strength:"); + Serial.print(lastValue); + Serial.print("\tcurrent strength:"); + Serial.println(value); + + // indicate the relative string by lighting the appropriate LED + allOff(); // turn off all the LEDS + + if (value > lastValue) { // if the signal's getting stronger + digitalWrite(10, HIGH); + } + else if (value < lastValue){ // if the signal's getting weaker + digitalWrite(8, HIGH); + } + else { // if the signal's stayed steady + digitalWrite(9, HIGH); + } + + lastValue = value; // record this value for next time + delay(10); // small delay before next time through the loop +} + + +void allOff() { + digitalWrite(8, LOW); + digitalWrite(9, LOW); + digitalWrite(10, LOW); +} + + + + + + diff --git a/libraries/Bridge/examples/Process/Process.ino b/libraries/Bridge/examples/Process/Process.ino new file mode 100644 index 0000000..919cea7 --- /dev/null +++ b/libraries/Bridge/examples/Process/Process.ino @@ -0,0 +1,70 @@ +/* + Running process using Process class. + + This sketch demonstrate how to run linux processes + using an Arduino Yún. + + created 5 Jun 2013 + by Cristian Maglie + + */ + +#include <Process.h> + +void setup() { + // Setup Bridge (needed every time we communicate with the Arduino Yún) + Bridge.begin(); + + // Setup Console + Console.begin(); + // Buffering improves Console performance, but we must remember to + // finish sending using the Console.flush() command. + Console.buffer(64); + + // Wait until a Network Monitor is connected. + while (!Console); + + // run various example processes + runCurl(); + runCpuInfo(); +} + +void loop() { + // Do nothing here. +} + +void runCurl() { + // Launch "curl" command and get Arduino asciilogo from the network + + Process p; // Create a process and call it "p" + p.begin("curl"); // Process should launch the "curl" command + p.addParameter("http://arduino.cc/asciilogo.txt"); // Add the URL parameter to "curl" + p.run(); // Run the process and wait for its termination + + // Print arduino logo over the console. + // A process output can be read with the stream methods + while (p.available()>0) { + char c = p.read(); + Console.print(c); + } + // Ensure the latest bit of data is sent. + Console.flush(); +} + +void runCpuInfo() { + // Launch "cat /proc/cpuinfo" command (shows info on Atheros CPU) + Process p; + p.begin("cat"); + p.addParameter("/proc/cpuinfo"); + p.run(); + + // Print command output on the Console. + // A process output can be read with the stream methods + while (p.available()>0) { + char c = p.read(); + Console.print(c); + } + // Ensure the latest bit of data is sent. + Console.flush(); +} + diff --git a/libraries/Bridge/examples/ShellCommands/ShellCommands.ino b/libraries/Bridge/examples/ShellCommands/ShellCommands.ino new file mode 100644 index 0000000..4fd7384 --- /dev/null +++ b/libraries/Bridge/examples/ShellCommands/ShellCommands.ino @@ -0,0 +1,26 @@ + +/* Demonstrate shell commands */ + +#include <Process.h> + +void setup() { + Bridge.begin(); + Console.begin(); + Console.buffer(64); +} + +void loop() { + Process p; + // This command line prints the name of the wireless that the board is connected to or that the board has created + p.runShellCommand(F("lua /usr/lib/lua/pretty_wifi_info.lua | grep SSID")); + + // Read command output + while (p.available()) { + char c = p.read(); + Console.print(c); + } + Console.flush(); + + delay(5000); +} + diff --git a/libraries/Bridge/examples/TimeCheck/TimeCheck.ino b/libraries/Bridge/examples/TimeCheck/TimeCheck.ino new file mode 100644 index 0000000..54fd131 --- /dev/null +++ b/libraries/Bridge/examples/TimeCheck/TimeCheck.ino @@ -0,0 +1,79 @@ + +/* + Time Check + + Gets the time from the linino processor via Bridge + then parses out hours, minutes and seconds for the Arduino + using an Arduino Yun. + + created 27 May 2013 + By Tom Igoe + */ + + +#include <Process.h> + +Process date; // process used to get the date +int hours, minutes, seconds; // for the results +int lastSecond = -1; // need an impossible value for comparison + +void setup() { + Serial.begin(9600); // initialize serial + Bridge.begin(); // initialize Bridge + delay(2000); // wait 2 seconds + + while(!Serial); // wait for Serial Monitor to open + Serial.println("Time Check"); // Title of sketch + + // run an initial date process. Should return: + // hh:mm:ss : + if (!date.running()) { + date.begin("date"); + date.addParameter("+%T"); + date.run(); + } +} + +void loop() { + + if(lastSecond != seconds) { // if a second has passed + // print the time: + if (hours <= 9) Serial.print("0"); // adjust for 0-9 + Serial.print(hours); + Serial.print(":"); + if (minutes <= 9) Serial.print("0"); // adjust for 0-9 + Serial.print(minutes); + Serial.print(":"); + if (seconds <= 9) Serial.print("0"); // adjust for 0-9 + Serial.println(seconds); + + // restart the date process: + if (!date.running()) { + date.begin("date"); + date.addParameter("+%T"); + date.run(); + } + } + + //if there's a result from the date process, parse it: + while (date.available()>0) { + // get the result of the date process (should be hh:mm:ss): + String timeString = date.readString(); + + // find the colons: + int firstColon = timeString.indexOf(":"); + int secondColon= timeString.lastIndexOf(":"); + + // get the substrings for hour, minute second: + String hourString = timeString.substring(0, firstColon); + String minString = timeString.substring(firstColon+1, secondColon); + String secString = timeString.substring(secondColon+1); + + // convert to ints,saving the previous second: + hours = hourString.toInt(); + minutes = minString.toInt(); + lastSecond = seconds; // save to do a time comparison + seconds = secString.toInt(); + } + +} diff --git a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino new file mode 100644 index 0000000..4df9bf0 --- /dev/null +++ b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino @@ -0,0 +1,32 @@ +#include <Process.h> + +void setup() { + Serial.begin(9600); // initialize serial communication + while(!Serial); // do nothing until the serial monitor is opened + + Serial.println("Starting bridge...\n"); + pinMode(13,OUTPUT); + digitalWrite(13, LOW); + Bridge.begin(); // make contact with the linux processor + digitalWrite(13, HIGH); + + delay(2000); // wait 2 seconds +} + +void loop() { + Process wifiCheck; // initialize a new process + + wifiCheck.runShellCommand("lua /arduino/pretty_wifi_info.lua"); // command you want to run + + // while there's any characters coming back from the + // process, print them to the serial monitor: + while (wifiCheck.available() > 0) { + char thisChar = wifiCheck.read(); + Serial.print(thisChar); + } + + Serial.println(); + + delay(5000); +} + diff --git a/libraries/Bridge/examples/XivelyClient/XivelyClient.ino b/libraries/Bridge/examples/XivelyClient/XivelyClient.ino new file mode 100644 index 0000000..48b1403 --- /dev/null +++ b/libraries/Bridge/examples/XivelyClient/XivelyClient.ino @@ -0,0 +1,110 @@ +/* + Xively sensor client with Strings + + This sketch connects an analog sensor to Xively, + using an Arduino Yún. + + created 15 March 2010 + updated 27 May 2013 + by Tom Igoe + + */ + +// include all Libraries needed: +#include <Process.h> +#include "passwords.h" // contains my passwords, see below + +/* + NOTE: passwords.h is not included with this repo because it contains my passwords. + You need to create it for your own version of this application. To do so, make + a new tab in Arduino, call it passwords.h, and include the following variables and constants: + + #define APIKEY "foo" // replace your pachube api key here + #define FEEDID 0000 // replace your feed ID + #define USERAGENT "my-project" // user agent is the project name + */ + + +// set up net client info: +const unsigned long postingInterval = 60000; //delay between updates to xively.com +unsigned long lastRequest = 0; // when you last made a request +String dataString = ""; + +void setup() { + // start serial port: + Bridge.begin(); + Console.begin(); + + while(!Console); // wait for Network Console to open + Console.println("Xively client"); + + // Do a first update immediately + updateData(); + sendData(); + lastRequest = millis(); +} + +void loop() { + // get a timestamp so you can calculate reading and sending intervals: + long now = millis(); + + // if the sending interval has passed since your + // last connection, then connect again and send data: + if (now - lastRequest >= postingInterval) { + updateData(); + sendData(); + lastRequest = now; + } +} + +void updateData() { + // convert the readings to a String to send it: + dataString = "Temperature,"; + dataString += random(10) + 20; + // add pressure: + dataString += "\nPressure,"; + dataString += random(5) + 100; +} + +// this method makes a HTTP connection to the server: +void sendData() { + // form the string for the API header parameter: + String apiString = "X-ApiKey: "; + apiString += APIKEY; + + // form the string for the URL parameter: + String url = "https://api.xively.com/v2/feeds/"; + url += FEEDID; + url += ".csv"; + + // Send the HTTP PUT request + + // Is better to declare the Process here, so when the + // sendData function finishes the resources are immediately + // released. Declaring it global works too, BTW. + Process xively; + Console.print("\n\nSending data... "); + xively.begin("curl"); + xively.addParameter("-k"); + xively.addParameter("--request"); + xively.addParameter("PUT"); + xively.addParameter("--data"); + xively.addParameter(dataString); + xively.addParameter("--header"); + xively.addParameter(apiString); + xively.addParameter(url); + xively.run(); + Console.println("done!"); + + // If there's incoming data from the net connection, + // send it out the Console: + while (xively.available()>0) { + char c = xively.read(); + Console.write(c); + } + +} + + + + diff --git a/libraries/Bridge/examples/YahooWeather/YahooWeather.ino b/libraries/Bridge/examples/YahooWeather/YahooWeather.ino new file mode 100644 index 0000000..b751e1d --- /dev/null +++ b/libraries/Bridge/examples/YahooWeather/YahooWeather.ino @@ -0,0 +1,94 @@ +/* + Yahoo Weather Forecast parser + + http://developer.yahoo.com/weather/ + This sketch demonstrate how to use the Linux command line tools + to parse a simple XML file on the Arduino Yún. + + First thing download the XML file from the Yahoo Weather service + than use "grep" and "cut" to extract the data you want. + + To find the location ID of your location, browse or search for your + city from the Weather home page. The location ID is in the URL for + the forecast page for that city. + + created 21 Jun 2013 + by Federico Vanzati + + */ + +#include <Bridge.h> + +String locationID = "725003"; // Turin, Italy + +// table with keywords to search in the XML file +// the third column is the tag to the field +String forecast[10][3] = { + "location", "2", "city", + "condition", "6", "temperature", + "condition", "2", "condition", + "astronomy", "2", "sunrise", + "astronomy", "4", "sunset", + "atmosphere", "2", "humidity", + "atmosphere", "6", "pressure", + "wind", "6", "wind speed", + "wind", "4", "wind direction", + "wind", "2", "chill temperature" +}; + + +void setup() { + Bridge.begin(); + Serial.begin(9600); + while(!Serial); + + Serial.println("Weather Forecast for your location: \n"); +} + +void loop() { + + for(int i=0; i<10; i++) { + + // Compose the request + + // curl is a program that connect to an URL an download the content + // is used to get the weather forecast from yahoo in XML format + String command = "curl -s "; // -s is the silent option + command += "http://weather.yahooapis.com/forecastrss"; // yahoo weather RSS service + command += "?w="; // query for the location + command += locationID; + //command += "\\&u=c"; // ask for celsius degrees + + // add a new process + // grep is used to extract a single line of content containig a search keyword form the XML + command += " | "; // pipe a new process + command += "grep "; + command += forecast[i][0]; // word to search in the XML file + + // add a new process + // cut is a program that split a text in different fields + // when encouter the passed character delimiter + command += " | "; // pipe a new process + command += "cut "; + command += "-d \\\" "; // -d parameter split the string every " char + command += "-f "; // -f parameter is to return the 6th splitted element + command += forecast[i][1]; // the field are already manually calculated and inserted in the forecast table + + + Serial.print(forecast[i][2]); + Serial.print("= "); + + // run the command + Process wf; + wf.runShellCommand(command); + + while(wf.available()>0) + { + Serial.print( (char)wf.read() ); + } + } + + //do nothing forevermore + while(1); +} + diff --git a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino new file mode 100644 index 0000000..11be9a3 --- /dev/null +++ b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino @@ -0,0 +1,82 @@ +/* + Arduino Yun USB-to-Serial + + Allows you to use the Yun's 32U4 processor as a + serial terminal for the linino processor. + + Upload this to an Arduino Yun via serial (not WiFi) + then open the serial monitor at 115200 to see the boot process + of the linino processor. You can also use the serial monitor + as a basic command line interface for the linino processor using + this sketch. + + From the serial monitor the following commands can be issued: + + '~' followed by '0' -> Set the UART speed to 57600 baud + '~' followed by '1' -> Set the UART speed to 115200 baud + + The circuit: + * Arduino Yun + + created March 2013 + by Massimo Banzi + modified by Cristian Maglie + + This example code is in the public domain. + */ + +long lininoBaud = 115200; + +// Pin 13 has an LED connected on most Arduino boards. +int led = 13; +int ledState = HIGH; // whether the LED is high or low + + +void setup() { + Serial.begin(115200); // open serial connection via USB-Serial + Serial1.begin(lininoBaud); // open serial connection to Linino + + // initialize the digital pin as an output. + pinMode(led, OUTPUT); + digitalWrite(led, ledState); // turn the LED on (HIGH is the voltage level) +} + + +boolean commandMode = false; + +void loop() { + // copy from virtual serial line to uart and vice versa + if (Serial.available()) { // got anything from USB-Serial? + char c = (char)Serial.read(); // read from USB-serial + if (commandMode == false) { // if we aren't in command mode... + if (c == '~') { // Tilde '~' key pressed? + commandMode = true; // enter in command mode + } else { + Serial1.write(c); // otherwise write char to Linino + } + } else { // if we are in command mode... + if (c == '0') { // '0' key pressed? + Serial1.begin(57600); // set speed to 57600 + Serial.println("Speed set to 57600"); + } else if (c == '1') { // '1' key pressed? + Serial1.begin(115200); // set speed to 115200 + Serial.println("Speed set to 115200"); + } else { // any other key pressed? + Serial1.write('~'); // write '~' to Linino + Serial1.write(c); // write char to Linino + } + commandMode = false; // in all cases exit from command mode + } + ledState=!ledState; // invert LED state + digitalWrite(led, ledState); // toggle the LED + } + if (Serial1.available()) { // got anything from Linino? + char c = (char)Serial1.read(); // read from Linino + Serial.write(c); // write to USB-serial + } +} + + + + + |