diff options
Diffstat (limited to 'libraries')
30 files changed, 170 insertions, 45 deletions
diff --git a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino index 88e3488..0709b2d 100644 --- a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino +++ b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino @@ -14,7 +14,11 @@ byte value; void setup() { + // initialize serial and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } } void loop() diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.ino b/libraries/Ethernet/examples/ChatServer/ChatServer.ino index de75257..d50e5a6 100644 --- a/libraries/Ethernet/examples/ChatServer/ChatServer.ino +++ b/libraries/Ethernet/examples/ChatServer/ChatServer.ino @@ -12,7 +12,7 @@ created 18 Dec 2009 by David A. Mellis - modified 12 March 2012 + modified 9 Apr 2012 by Tom Igoe */ @@ -39,8 +39,13 @@ void setup() { Ethernet.begin(mac, ip, gateway, subnet); // start listening for clients server.begin(); - // open the serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Chat server address:"); Serial.println(Ethernet.localIP()); } diff --git a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino index 630dd17..5eaaf24 100644 --- a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino +++ b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino @@ -9,6 +9,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 12 April 2011 + modified 9 Apr 2012 by Tom Igoe */ @@ -27,8 +28,13 @@ byte mac[] = { EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino index 5082054..09cbd43 100644 --- a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino +++ b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino @@ -12,6 +12,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 21 May 2011 + modified 9 Apr 2012 by Tom Igoe Based on ChatServer example by David A. Mellis @@ -34,8 +35,14 @@ EthernetServer server(23); boolean gotAMessage = false; // whether or not you got a message from the client yet void setup() { - // open the serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: Serial.println("Trying to get an IP address using DHCP"); if (Ethernet.begin(mac) == 0) { diff --git a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino index 5c7a53a..c14abf4 100644 --- a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino +++ b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino @@ -9,7 +9,7 @@ created 18 Dec 2009 by David A. Mellis - modified 12 April 2011 + modified 9 Apr 2012 by Tom Igoe, based on work by Adrian McEwen */ @@ -28,8 +28,13 @@ char serverName[] = "www.google.com"; EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino index 4d4290d..dfd2d40 100644 --- a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino +++ b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino @@ -16,7 +16,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 15 March 2010 - updated 16 Mar 2012 + modified 9 Apr 2012 by Tom Igoe with input from Usman Haque and Joe Saavedra http://arduino.cc/en/Tutorial/PachubeClient @@ -53,8 +53,13 @@ boolean lastConnected = false; // state of the connection last t const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com void setup() { - // start serial port: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino index 3535287..2a96e9f 100644 --- a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino +++ b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino @@ -1,12 +1,12 @@ /* - Pachube sensor client with Strings + Cosm sensor client with Strings - This sketch connects an analog sensor to Pachube (http://www.pachube.com) + This sketch connects an analog sensor to Cosm (http://www.cosm.com) using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or the Adafruit Ethernet shield, either one will work, as long as it's got a Wiznet Ethernet module on board. - This example has been updated to use version 2.0 of the Pachube.com API. + This example has been updated to use version 2.0 of the Cosm.com API. To make it work, create a feed with two datastreams, and give them the IDs sensor1 and sensor2. Or change the code below to match your feed. @@ -18,10 +18,10 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 15 March 2010 - updated 16 Mar 2012 + modified 9 Apr 2012 by Tom Igoe with input from Usman Haque and Joe Saavedra - http://arduino.cc/en/Tutorial/PachubeClientString + http://arduino.cc/en/Tutorial/CosmClientString This code is in the public domain. */ @@ -30,14 +30,16 @@ #include <Ethernet.h> -#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +/#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here #define FEEDID 00000 // replace your feed ID #define USERAGENT "My Project" // user agent is the project name + // assign a MAC address for the ethernet controller. // fill in your address here: byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + // fill in an available IP address on your network here, // for manual configuration: IPAddress ip(10,0,1,20); @@ -47,16 +49,21 @@ EthernetClient client; // if you don't want to use DNS (and reduce your sketch size) // use the numeric IP instead of the name for the server: -//IPAddress server(216,52,233,122); // numeric IP for api.pachube.com -char server[] = "api.pachube.com"; // name address for pachube API +IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +//char server[] = "api.cosm.com"; // name address for Cosm API unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds boolean lastConnected = false; // state of the connection last time through the main loop -const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com +const unsigned long postingInterval = 10*1000; //delay between updates to Cosm.com void setup() { - // start serial port: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // give the ethernet module time to boot up: delay(1000); // start the Ethernet connection: @@ -76,7 +83,7 @@ void loop() { dataString += sensorReading; // you can append multiple readings to this String if your - // pachube feed is set up to handle multiple values: + // Cosm feed is set up to handle multiple values: int otherSensorReading = analogRead(A1); dataString += "\nsensor2,"; dataString += otherSensorReading; @@ -116,8 +123,8 @@ void sendData(String thisData) { client.print("PUT /v2/feeds/"); client.print(FEEDID); client.println(".csv HTTP/1.1"); - client.println("Host: api.pachube.com"); - client.print("X-PachubeApiKey: "); + client.println("Host: api.cosm.com"); + client.print("X-CosmApiKey: "); client.println(APIKEY); client.print("User-Agent: "); client.println(USERAGENT); diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino index 5cf1ad8..3457125 100644 --- a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino +++ b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino @@ -13,6 +13,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 14 Sep 2010 + modified 9 Apr 2012 by Tom Igoe */ @@ -38,8 +39,13 @@ EthernetClient client; void setup() { // start the Ethernet connection: Ethernet.begin(mac, ip); - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // give the Ethernet shield a second to initialize: delay(1000); Serial.println("connecting..."); diff --git a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino index a3b397d..3587d72 100644 --- a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino +++ b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino @@ -17,6 +17,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 21 May 2011 + modified 9 Apr 2012 by Tom Igoe This code is in the public domain. @@ -51,8 +52,13 @@ void setup() { currentLine.reserve(256); tweet.reserve(150); - // initialize serial: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // attempt a DHCP connection: Serial.println("Attempting to get an IP address using DHCP:"); if (!Ethernet.begin(mac)) { diff --git a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino index b4e24b8..93ffe39 100644 --- a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino +++ b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino @@ -9,7 +9,7 @@ created 4 Sep 2010 by Michael Margolis - modified 17 Sep 2010 + modified 9 Apr 2012 by Tom Igoe This code is in the public domain. @@ -38,7 +38,12 @@ EthernetUDP Udp; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start Ethernet and UDP if (Ethernet.begin(mac) == 0) { diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino index 1806854..5d5d7f2 100644 --- a/libraries/Ethernet/examples/WebClient/WebClient.ino +++ b/libraries/Ethernet/examples/WebClient/WebClient.ino @@ -8,6 +8,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 18 Dec 2009 + modified 9 Apr 2012 by David A. Mellis */ @@ -26,8 +27,12 @@ IPAddress server(173,194,33,104); // Google EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/WebServer/WebServer.ino b/libraries/Ethernet/examples/WebServer/WebServer.ino index 7cf2c53..ce8dbb1 100644 --- a/libraries/Ethernet/examples/WebServer/WebServer.ino +++ b/libraries/Ethernet/examples/WebServer/WebServer.ino @@ -10,7 +10,7 @@ created 18 Dec 2009 by David A. Mellis - modified 20 Mar 2012 + modified 9 Apr 2012 by Tom Igoe */ @@ -30,7 +30,13 @@ IPAddress ip(192,168,1, 177); EthernetServer server(80); void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection and the server: Ethernet.begin(mac, ip); server.begin(); diff --git a/libraries/Ethernet/utility/w5100.h b/libraries/Ethernet/utility/w5100.h index 153aedb..8dccd9f 100755 --- a/libraries/Ethernet/utility/w5100.h +++ b/libraries/Ethernet/utility/w5100.h @@ -327,7 +327,11 @@ private: inline static void initSS() { DDRB |= _BV(4); }; inline static void setSS() { PORTB &= ~_BV(4); }; inline static void resetSS() { PORTB |= _BV(4); }; -#elif defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB162__) +#elif defined(__AVR_ATmega32U4__) + inline static void initSS() { DDRB |= _BV(6); }; + inline static void setSS() { PORTB &= ~_BV(6); }; + inline static void resetSS() { PORTB |= _BV(6); }; +#elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB162__) inline static void initSS() { DDRB |= _BV(0); }; inline static void setSS() { PORTB &= ~_BV(0); }; inline static void resetSS() { PORTB |= _BV(0); }; diff --git a/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino b/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino index 27123ad..1127d8f 100644 --- a/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino +++ b/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino @@ -32,7 +32,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalAutoscroll + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/Blink/Blink.ino b/libraries/LiquidCrystal/examples/Blink/Blink.ino index e410424..9667b5d 100644 --- a/libraries/LiquidCrystal/examples/Blink/Blink.ino +++ b/libraries/LiquidCrystal/examples/Blink/Blink.ino @@ -32,7 +32,7 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalBlink */ diff --git a/libraries/LiquidCrystal/examples/Cursor/Cursor.ino b/libraries/LiquidCrystal/examples/Cursor/Cursor.ino index 28e2a6a..05862a4 100644 --- a/libraries/LiquidCrystal/examples/Cursor/Cursor.ino +++ b/libraries/LiquidCrystal/examples/Cursor/Cursor.ino @@ -33,7 +33,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalCursor + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/Display/Display.ino b/libraries/LiquidCrystal/examples/Display/Display.ino index b000731..a85effb 100644 --- a/libraries/LiquidCrystal/examples/Display/Display.ino +++ b/libraries/LiquidCrystal/examples/Display/Display.ino @@ -33,7 +33,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalDisplay + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/Scroll/Scroll.ino b/libraries/LiquidCrystal/examples/Scroll/Scroll.ino index 71e5e8c..0d6d8dc 100644 --- a/libraries/LiquidCrystal/examples/Scroll/Scroll.ino +++ b/libraries/LiquidCrystal/examples/Scroll/Scroll.ino @@ -33,7 +33,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalScroll + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino index 9727cee..a6f8f40 100644 --- a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino +++ b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino @@ -32,7 +32,7 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalSerial */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino index 51bab1f..cabd8ea 100644 --- a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino +++ b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino @@ -32,7 +32,7 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalTextDirection */ @@ -49,7 +49,6 @@ void setup() { lcd.begin(16, 2); // turn on the cursor: lcd.cursor(); - Serial.begin(9600); } void loop() { diff --git a/libraries/LiquidCrystal/examples/setCursor/setCursor.ino b/libraries/LiquidCrystal/examples/setCursor/setCursor.ino index 3c4edf3..e45c491 100644 --- a/libraries/LiquidCrystal/examples/setCursor/setCursor.ino +++ b/libraries/LiquidCrystal/examples/setCursor/setCursor.ino @@ -32,7 +32,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalSetCursor + */ // include the library code: diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino index fb2f6c3..0c2dfc5 100644 --- a/libraries/SD/examples/CardInfo/CardInfo.ino +++ b/libraries/SD/examples/CardInfo/CardInfo.ino @@ -16,7 +16,7 @@ created 28 Mar 2011 by Limor Fried - modified 16 Mar 2011 + modified 9 Apr 2012 by Tom Igoe */ // include the SD library: @@ -35,7 +35,13 @@ const int chipSelect = 4; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("\nInitializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SD/examples/Datalogger/Datalogger.ino b/libraries/SD/examples/Datalogger/Datalogger.ino index 73d81af..a7f85ee 100644 --- a/libraries/SD/examples/Datalogger/Datalogger.ino +++ b/libraries/SD/examples/Datalogger/Datalogger.ino @@ -13,7 +13,7 @@ ** CS - pin 4 created 24 Nov 2010 - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -30,7 +30,13 @@ const int chipSelect = 4; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // make sure that the default chip select pin is set to // output, even if you don't use it: diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino index 961717f..d83089a 100644 --- a/libraries/SD/examples/DumpFile/DumpFile.ino +++ b/libraries/SD/examples/DumpFile/DumpFile.ino @@ -12,6 +12,9 @@ ** CS - pin 4 created 22 December 2010 + by Limor Fried + modified 9 Apr 2012 + by Tom Igoe This example code is in the public domain. @@ -27,7 +30,13 @@ const int chipSelect = 4; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // make sure that the default chip select pin is set to // output, even if you don't use it: diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino index 5ed9fea..a15b862 100644 --- a/libraries/SD/examples/Files/Files.ino +++ b/libraries/SD/examples/Files/Files.ino @@ -11,7 +11,7 @@ created Nov 2010 by David A. Mellis - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -23,7 +23,13 @@ File myFile; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino index 9957218..5805fc8 100644 --- a/libraries/SD/examples/ReadWrite/ReadWrite.ino +++ b/libraries/SD/examples/ReadWrite/ReadWrite.ino @@ -11,7 +11,7 @@ created Nov 2010 by David A. Mellis - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -24,7 +24,13 @@ File myFile; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino index b2435a2..876c3f8 100644 --- a/libraries/SD/examples/listfiles/listfiles.ino +++ b/libraries/SD/examples/listfiles/listfiles.ino @@ -11,7 +11,7 @@ created Nov 2010 by David A. Mellis - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -23,7 +23,13 @@ File root; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino index 615d2b3..69bcc01 100644 --- a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino +++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino @@ -9,6 +9,7 @@ * TX is digital pin 3 (connect to RX of other device) created back in the mists of time + modified 9 Apr 2012 by Tom Igoe based on Mikal Hart's example @@ -21,7 +22,13 @@ SoftwareSerial mySerial(2, 3); // RX, TX void setup() { + // Open serial communications and wait for port to open: Serial.begin(57600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("Goodnight moon!"); // set the data rate for the SoftwareSerial port diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino index e870c6f..d9f8f45 100644 --- a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino +++ b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino @@ -17,6 +17,7 @@ * Second serial device's TX attached to digital pin 4, RX to pin 5 created 18 Apr. 2011 + modified 9 Apr 2012 by Tom Igoe based on Mikal Hart's twoPortRXExample @@ -33,8 +34,12 @@ SoftwareSerial portTwo(4, 5); void setup() { - // Start the hardware serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // Start each software serial port portOne.begin(9600); diff --git a/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino b/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino index dbd0f7f..1a67a55 100644 --- a/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino +++ b/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino @@ -26,11 +26,10 @@ const int stepsPerRevolution = 200; // change this to fit the number of steps p // initialize the stepper library on pins 8 through 11: Stepper myStepper(stepsPerRevolution, 8,9,10,11); -int stepCount = 0; // number of steps the motor has taken +int stepCount = 0; // number of steps the motor has taken void setup() { - // initialize the serial port: - Serial.begin(9600); + // nothing to do inside the setup } void loop() { |