1 files changed, 134 insertions, 0 deletions
diff --git a/libraries/WiFi/examples/WifiWebServer/WifiWebServer.ino b/libraries/WiFi/examples/WifiWebServer/WifiWebServer.ino
new file mode 100644
index 0000000..7d7a247
--- /dev/null
+++ b/libraries/WiFi/examples/WifiWebServer/WifiWebServer.ino
@@ -0,0 +1,134 @@
+/*
+  WiFi Web Server
+ 
+ A simple web server that shows the value of the analog input pins.
+ using a WiFi shield.
+ 
+ This example is written for a network using WPA encryption. For 
+ WEP or WPA, change the Wifi.begin() call accordingly.
+ 
+ Circuit:
+ * WiFi shield attached
+ * Analog inputs attached to pins A0 through A5 (optional)
+ 
+ created 13 July 2010
+ by dlf (Metodo2 srl)
+ modified 31 May 2012
+ by Tom Igoe
+
+ */
+
+#include <SPI.h>
+#include <WiFi.h>
+
+
+char ssid[] = "yourNetwork";      //  your network SSID (name) 
+char pass[] = "secretPassword";   // your network password
+int keyIndex = 0;                 // your network key Index number (needed only for WEP)
+
+int status = WL_IDLE_STATUS;
+
+WiFiServer server(80);
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(9600); 
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  
+  // check for the presence of the shield:
+  if (WiFi.status() == WL_NO_SHIELD) {
+    Serial.println("WiFi shield not present"); 
+    // don't continue:
+    while(true);
+  } 
+  
+  // attempt to connect to Wifi network:
+  while ( status != WL_CONNECTED) { 
+    Serial.print("Attempting to connect to SSID: ");
+    Serial.println(ssid);
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
+    status = WiFi.begin(ssid, pass);
+
+    // wait 10 seconds for connection:
+    delay(10000);
+  } 
+  server.begin();
+  // you're connected now, so print out the status:
+  printWifiStatus();
+}
+
+
+void loop() {
+  // listen for incoming clients
+  WiFiClient client = server.available();
+  if (client) {
+    Serial.println("new client");
+    // an http request ends with a blank line
+    boolean currentLineIsBlank = true;
+    while (client.connected()) {
+      if (client.available()) {
+        char c = client.read();
+        Serial.write(c);
+        // if you've gotten to the end of the line (received a newline
+        // character) and the line is blank, the http request has ended,
+        // so you can send a reply
+        if (c == '\n' && currentLineIsBlank) {
+          // send a standard http response header
+          client.println("HTTP/1.1 200 OK");
+          client.println("Content-Type: text/html");
+          client.println("Connection: close");
+          client.println();
+          client.println("<!DOCTYPE HTML>");
+          client.println("<html>");
+          // add a meta refresh tag, so the browser pulls again every 5 seconds:
+          client.println("<meta http-equiv=\"refresh\" content=\"5\">");
+          // output the value of each analog input pin
+          for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
+            int sensorReading = analogRead(analogChannel);
+            client.print("analog input ");
+            client.print(analogChannel);
+            client.print(" is ");
+            client.print(sensorReading);
+            client.println("<br />");       
+          }
+          client.println("</html>");
+           break;
+        }
+        if (c == '\n') {
+          // you're starting a new line
+          currentLineIsBlank = true;
+        } 
+        else if (c != '\r') {
+          // you've gotten a character on the current line
+          currentLineIsBlank = false;
+        }
+      }
+    }
+    // give the web browser time to receive the data
+    delay(1);
+      // close the connection:
+      client.stop();
+      Serial.println("client disonnected");
+  }
+}
+
+
+void printWifiStatus() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal strength (RSSI):");
+  Serial.print(rssi);
+  Serial.println(" dBm");
+}
+