diff options
Diffstat (limited to 'libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino')
| -rw-r--r-- | libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino b/libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino new file mode 100644 index 0000000..f8ffc07 --- /dev/null +++ b/libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino @@ -0,0 +1,190 @@ +/* + Wifi Pachube sensor client + + This sketch connects an analog sensor to Pachube (http://www.pachube.com) + using an Arduino Wifi shield. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + This example has been updated to use version 2.0 of the Pachube API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + Circuit: + * Analog sensor attached to analog in 0 + * Wifi shield attached to pins 10, 11, 12, 13 + + created 13 Mar 2012 + modified 31 May 2012 + by Tom Igoe + modified 8 Sept 2012 + by Scott Fitzgerald + + This code is in the public domain. + + */ +#include <SPI.h> +#include <WiFi.h> + +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Arduino Project" // user agent is the project name + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password + +int status = WL_IDLE_STATUS; + +// initialize the library instance: +WiFiClient client; +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(216,52,233,121); // numeric IP for api.pachube.com +//char server[] = "api.pachube.com"; // name address for pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to pachube.com + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + // you're connected now, so print out the status: + printWifiStatus(); +} + + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + while (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(sensorReading); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(int thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.pachube.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +// This method calculates the number of digits in the +// sensor reading. Since each digit of the ASCII decimal +// representation is a byte, the number of digits equals +// the number of bytes: + +int getLength(int someValue) { + // there's at least one byte: + int digits = 1; + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) { + dividend = dividend /10; + digits++; + } + // return the number of digits: + return digits; +} + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + |