1 files changed, 0 insertions, 134 deletions
diff --git a/libraries/WiFi/examples/WiFiWebServer/WiFiWebServer.ino b/libraries/WiFi/examples/WiFiWebServer/WiFiWebServer.ino
deleted file mode 100644
index de861e8..0000000
--- a/libraries/WiFi/examples/WiFiWebServer/WiFiWebServer.ino
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
-  WiFi Web Server
- 
- A simple web server that shows the value of the analog input pins.
- using a WiFi shield.
- 
- This example is written for a network using WPA encryption. For 
- WEP or WPA, change the Wifi.begin() call accordingly.
- 
- Circuit:
- * WiFi shield attached
- * Analog inputs attached to pins A0 through A5 (optional)
- 
- created 13 July 2010
- by dlf (Metodo2 srl)
- modified 31 May 2012
- by Tom Igoe
-
- */
-
-#include <SPI.h>
-#include <WiFi.h>
-
-
-char ssid[] = "yourNetwork";      // your network SSID (name) 
-char pass[] = "secretPassword";   // your network password
-int keyIndex = 0;                 // your network key Index number (needed only for WEP)
-
-int status = WL_IDLE_STATUS;
-
-WiFiServer server(80);
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
-  // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid, pass);
-
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  server.begin();
-  // you're connected now, so print out the status:
-  printWifiStatus();
-}
-
-
-void loop() {
-  // listen for incoming clients
-  WiFiClient client = server.available();
-  if (client) {
-    Serial.println("new client");
-    // an http request ends with a blank line
-    boolean currentLineIsBlank = true;
-    while (client.connected()) {
-      if (client.available()) {
-        char c = client.read();
-        Serial.write(c);
-        // if you've gotten to the end of the line (received a newline
-        // character) and the line is blank, the http request has ended,
-        // so you can send a reply
-        if (c == '\n' && currentLineIsBlank) {
-          // send a standard http response header
-          client.println("HTTP/1.1 200 OK");
-          client.println("Content-Type: text/html");
-          client.println("Connection: close");  // the connection will be closed after completion of the response
-          client.println("Refresh: 5");  // refresh the page automatically every 5 sec
-          client.println();
-          client.println("<!DOCTYPE HTML>");
-          client.println("<html>");
-          // output the value of each analog input pin
-          for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
-            int sensorReading = analogRead(analogChannel);
-            client.print("analog input ");
-            client.print(analogChannel);
-            client.print(" is ");
-            client.print(sensorReading);
-            client.println("<br />");       
-          }
-          client.println("</html>");
-           break;
-        }
-        if (c == '\n') {
-          // you're starting a new line
-          currentLineIsBlank = true;
-        } 
-        else if (c != '\r') {
-          // you've gotten a character on the current line
-          currentLineIsBlank = false;
-        }
-      }
-    }
-    // give the web browser time to receive the data
-    delay(1);
-    
-    // close the connection:
-    client.stop();
-    Serial.println("client disonnected");
-  }
-}
-
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}
-