1 files changed, 0 insertions, 84 deletions
diff --git a/libraries/TFT/examples/Arduino/TFTEtchASketch/TFTEtchASketch.ino b/libraries/TFT/examples/Arduino/TFTEtchASketch/TFTEtchASketch.ino
deleted file mode 100644
index 29e3483..0000000
--- a/libraries/TFT/examples/Arduino/TFTEtchASketch/TFTEtchASketch.ino
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-
- TFT EtchASketch
- 
- This example for the Arduino screen draws a white point
- on the GLCD based on the values of 2 potentiometers. 
- To clear the screen, press a button attached to pin 2.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/TFTEtchASketch
- 
- */
- 
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-// pin definition for the Uno
-#define cs   10
-#define dc   9
-#define rst  8  
-
-// pin definition for the Leonardo
-// #define cs   7
-// #define dc   0
-// #define rst  1 
-
-TFT TFTscreen = TFT(cs, dc, rst);
-
-// initial position of the cursor
-int xPos = TFTscreen.width()/2;
-int yPos = TFTscreen.height()/2;
-
-// pin the erase switch is connected to
-int erasePin = 2;
-
-void setup() {
-  // declare inputs
-  pinMode(erasePin, INPUT);
-  // initialize the screen
-  TFTscreen.begin();
-  // make the background black
-  TFTscreen.background(0,0,0); 
-}
-
-void loop()
-{
-  // read the potentiometers on A0 and A1 
-  int xValue = analogRead(A0);
-  int yValue = analogRead(A1);
-
-  // map the values and update the position
-  xPos = xPos + (map(xValue, 0, 1023, 2, -2));
-  yPos = yPos + (map(yValue, 0, 1023, -2, 2));
-  
-// don't let the point go past the screen edges
-  if(xPos > 159){
-    (xPos = 159);
-  }
-
-  if(xPos < 0){
-    (xPos = 0);
-  }
-  if(yPos > 127){
-    (yPos = 127);
-  }
-
-  if(yPos < 0){
-    (yPos = 0);
-  }
-  
-  // draw the point
-  TFTscreen.stroke(255,255,255);
-  TFTscreen.point(xPos,yPos);
-
-  // read the value of the pin, and erase the screen if pressed
-  if(digitalRead(erasePin) == HIGH){
-    TFTscreen.background(0,0,0);
-  }
-
-  delay(33);            
-}