2 files changed, 78 insertions, 50 deletions
diff --git a/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde b/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde
deleted file mode 100755
index 1db4536..0000000
--- a/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde
+++ /dev/null
@@ -1,50 +0,0 @@
-#include <SoftwareSerial.h>
-
-SoftwareSerial ss(2, 3);
-SoftwareSerial ss2(4, 5);
-
-/* This sample shows how to correctly process received data
-   on two different "soft" serial ports.  Here we listen on 
-   the first port (ss) until we receive a '?' character.  Then
-   we begin listening on the other soft port.
-*/
-
-void setup()
-{
-  // Start the HW serial port
-  Serial.begin(57600);
-
-  // Start each soft serial port
-  ss.begin(4800);
-  ss2.begin(4800);
-
-  // By default, the most recently "begun" port is listening.
-  // We want to listen on ss, so let's explicitly select it.
-  ss.listen();
-  
-  // Simply wait for a ? character to come down the pipe
-  Serial.println("Data from the first port: ");
-  char c = 0;
-  do
-    if (ss.available())
-    {
-      c = (char)ss.read();
-      Serial.print(c);
-    }
-  while (c != '?');
-
-  // Now listen on the second port
-  ss2.listen();
-
-  Serial.println("Data from the second port: ");
-}
-
-void loop()
-{
-  if (ss2.available())
-  {
-    char c = (char)ss2.read();
-    Serial.print(c);
-  }
-}
-  
diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
new file mode 100644
index 0000000..e870c6f
--- /dev/null
+++ b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
@@ -0,0 +1,78 @@
+/*
+  Software serial multple serial test
+ 
+ Receives from the two software serial ports, 
+ sends to the hardware serial port. 
+ 
+ In order to listen on a software port, you call port.listen(). 
+ When using two software serial ports, you have to switch ports
+ by listen()ing on each one in turn. Pick a logical time to switch
+ ports, like the end of an expected transmission, or when the 
+ buffer is empty. This example switches ports when there is nothing
+ more to read from a port
+ 
+ The circuit: 
+ Two devices which communicate serially are needed.
+ * First serial device's TX attached to digital pin 2, RX to pin 3
+ * Second serial device's TX attached to digital pin 4, RX to pin 5
+ 
+ created 18 Apr. 2011
+ by Tom Igoe
+ based on Mikal Hart's twoPortRXExample
+ 
+ This example code is in the public domain.
+ 
+ */
+
+#include <SoftwareSerial.h>
+// software serial #1: TX = digital pin 2, RX = digital pin 3
+SoftwareSerial portOne(2, 3);
+
+// software serial #2: TX = digital pin 4, RX = digital pin 5
+SoftwareSerial portTwo(4, 5);
+
+void setup()
+{
+  // Start the hardware serial port
+  Serial.begin(9600);
+
+  // Start each software serial port
+  portOne.begin(9600);
+  portTwo.begin(9600);
+}
+
+void loop()
+{
+  // By default, the last intialized port is listening.
+  // when you want to listen on a port, explicitly select it:
+  portOne.listen();
+  Serial.println("Data from port one:");
+  // while there is data coming in, read it
+  // and send to the hardware serial port:
+  while (portOne.available() > 0) {
+    char inByte = portOne.read();
+    Serial.write(inByte);
+  }
+
+  // blank line to separate data from the two ports:
+  Serial.println();
+
+  // Now listen on the second port
+  portTwo.listen();
+  // while there is data coming in, read it
+  // and send to the hardware serial port:
+  Serial.println("Data from port two:");
+  while (portTwo.available() > 0) {
+    char inByte = portTwo.read();
+    Serial.write(inByte);
+  }
+
+  // blank line to separate data from the two ports:
+  Serial.println();
+}
+
+
+
+
+
+