1 files changed, 0 insertions, 83 deletions
diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino
deleted file mode 100644
index 876c3f8..0000000
--- a/libraries/SD/examples/listfiles/listfiles.ino
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-  SD card basic file example
- 
- This example shows how to create and destroy an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-#include <SD.h>
-
-File root;
-
-void setup()
-{
-  // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);
-
-  if (!SD.begin(10)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-
-  root = SD.open("/");
-  
-  printDirectory(root, 0);
-  
-  Serial.println("done!");
-}
-
-void loop()
-{
-  // nothing happens after setup finishes.
-}
-
-void printDirectory(File dir, int numTabs) {
-   while(true) {
-     
-     File entry =  dir.openNextFile();
-     if (! entry) {
-       // no more files
-       //Serial.println("**nomorefiles**");
-       break;
-     }
-     for (uint8_t i=0; i<numTabs; i++) {
-       Serial.print('\t');
-     }
-     Serial.print(entry.name());
-     if (entry.isDirectory()) {
-       Serial.println("/");
-       printDirectory(entry, numTabs+1);
-     } else {
-       // files have sizes, directories do not
-       Serial.print("\t\t");
-       Serial.println(entry.size(), DEC);
-     }
-   }
-}
-
-
-