1 files changed, 0 insertions, 84 deletions
diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino
deleted file mode 100644
index a15b862..0000000
--- a/libraries/SD/examples/Files/Files.ino
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-  SD card basic file example
- 
- This example shows how to create and destroy an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-#include <SD.h>
-
-File myFile;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);
-
-  if (!SD.begin(4)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-
-  if (SD.exists("example.txt")) {
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");
-  }
-
-  // open a new file and immediately close it:
-  Serial.println("Creating example.txt...");
-  myFile = SD.open("example.txt", FILE_WRITE);
-  myFile.close();
-
-  // Check to see if the file exists: 
-  if (SD.exists("example.txt")) {
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");  
-  }
-
-  // delete the file:
-  Serial.println("Removing example.txt...");
-  SD.remove("example.txt");
-
-  if (SD.exists("example.txt")){ 
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");  
-  }
-}
-
-void loop()
-{
-  // nothing happens after setup finishes.
-}
-
-
-