diff options
Diffstat (limited to 'libraries/LiquidCrystal')
| -rwxr-xr-x | libraries/LiquidCrystal/LiquidCrystal.cpp | 309 | ||||
| -rwxr-xr-x | libraries/LiquidCrystal/LiquidCrystal.h | 104 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.pde | 70 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/Blink/Blink.pde | 58 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/Cursor/Cursor.pde | 58 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/Display/Display.pde | 58 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde | 56 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/Scroll/Scroll.pde | 83 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde | 62 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde | 84 | ||||
| -rw-r--r-- | libraries/LiquidCrystal/examples/setCursor/setCursor.pde | 68 | ||||
| -rwxr-xr-x | libraries/LiquidCrystal/keywords.txt | 37 |
12 files changed, 0 insertions, 1047 deletions
diff --git a/libraries/LiquidCrystal/LiquidCrystal.cpp b/libraries/LiquidCrystal/LiquidCrystal.cpp deleted file mode 100755 index b66f107..0000000 --- a/libraries/LiquidCrystal/LiquidCrystal.cpp +++ /dev/null @@ -1,309 +0,0 @@ -#include "LiquidCrystal.h" - -#include <stdio.h> -#include <string.h> -#include <inttypes.h> -#include "WProgram.h" - -// When the display powers up, it is configured as follows: -// -// 1. Display clear -// 2. Function set: -// DL = 1; 8-bit interface data -// N = 0; 1-line display -// F = 0; 5x8 dot character font -// 3. Display on/off control: -// D = 0; Display off -// C = 0; Cursor off -// B = 0; Blinking off -// 4. Entry mode set: -// I/D = 1; Increment by 1 -// S = 0; No shift -// -// Note, however, that resetting the Arduino doesn't reset the LCD, so we -// can't assume that its in that state when a sketch starts (and the -// LiquidCrystal constructor is called). - -LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, - uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) -{ - init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7); -} - -LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, - uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) -{ - init(0, rs, -1, enable, d0, d1, d2, d3, d4, d5, d6, d7); -} - -LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3) -{ - init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0); -} - -LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3) -{ - init(1, rs, -1, enable, d0, d1, d2, d3, 0, 0, 0, 0); -} - -void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, - uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) -{ - _rs_pin = rs; - _rw_pin = rw; - _enable_pin = enable; - - _data_pins[0] = d0; - _data_pins[1] = d1; - _data_pins[2] = d2; - _data_pins[3] = d3; - _data_pins[4] = d4; - _data_pins[5] = d5; - _data_pins[6] = d6; - _data_pins[7] = d7; - - pinMode(_rs_pin, OUTPUT); - // we can save 1 pin by not using RW. Indicate by passing -1 instead of pin# - if (_rw_pin != -1) { - pinMode(_rw_pin, OUTPUT); - } - pinMode(_enable_pin, OUTPUT); - - if (fourbitmode) - _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS; - else - _displayfunction = LCD_8BITMODE | LCD_1LINE | LCD_5x8DOTS; - - begin(16, 1); -} - -void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { - if (lines > 1) { - _displayfunction |= LCD_2LINE; - } - _numlines = lines; - _currline = 0; - - // for some 1 line displays you can select a 10 pixel high font - if ((dotsize != 0) && (lines == 1)) { - _displayfunction |= LCD_5x10DOTS; - } - - // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION! - // according to datasheet, we need at least 40ms after power rises above 2.7V - // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50 - delayMicroseconds(50000); - // Now we pull both RS and R/W low to begin commands - digitalWrite(_rs_pin, LOW); - digitalWrite(_enable_pin, LOW); - if (_rw_pin != -1) { - digitalWrite(_rw_pin, LOW); - } - - //put the LCD into 4 bit or 8 bit mode - if (! (_displayfunction & LCD_8BITMODE)) { - // this is according to the hitachi HD44780 datasheet - // figure 24, pg 46 - - // we start in 8bit mode, try to set 4 bit mode - write4bits(0x03); - delayMicroseconds(4500); // wait min 4.1ms - - // second try - write4bits(0x03); - delayMicroseconds(4500); // wait min 4.1ms - - // third go! - write4bits(0x03); - delayMicroseconds(150); - - // finally, set to 8-bit interface - write4bits(0x02); - } else { - // this is according to the hitachi HD44780 datasheet - // page 45 figure 23 - - // Send function set command sequence - command(LCD_FUNCTIONSET | _displayfunction); - delayMicroseconds(4500); // wait more than 4.1ms - - // second try - command(LCD_FUNCTIONSET | _displayfunction); - delayMicroseconds(150); - - // third go - command(LCD_FUNCTIONSET | _displayfunction); - } - - // finally, set # lines, font size, etc. - command(LCD_FUNCTIONSET | _displayfunction); - - // turn the display on with no cursor or blinking default - _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF; - display(); - - // clear it off - clear(); - - // Initialize to default text direction (for romance languages) - _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT; - // set the entry mode - command(LCD_ENTRYMODESET | _displaymode); - -} - -/********** high level commands, for the user! */ -void LiquidCrystal::clear() -{ - command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero - delayMicroseconds(2000); // this command takes a long time! -} - -void LiquidCrystal::home() -{ - command(LCD_RETURNHOME); // set cursor position to zero - delayMicroseconds(2000); // this command takes a long time! -} - -void LiquidCrystal::setCursor(uint8_t col, uint8_t row) -{ - int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 }; - if ( row > _numlines ) { - row = _numlines-1; // we count rows starting w/0 - } - - command(LCD_SETDDRAMADDR | (col + row_offsets[row])); -} - -// Turn the display on/off (quickly) -void LiquidCrystal::noDisplay() { - _displaycontrol &= ~LCD_DISPLAYON; - command(LCD_DISPLAYCONTROL | _displaycontrol); -} -void LiquidCrystal::display() { - _displaycontrol |= LCD_DISPLAYON; - command(LCD_DISPLAYCONTROL | _displaycontrol); -} - -// Turns the underline cursor on/off -void LiquidCrystal::noCursor() { - _displaycontrol &= ~LCD_CURSORON; - command(LCD_DISPLAYCONTROL | _displaycontrol); -} -void LiquidCrystal::cursor() { - _displaycontrol |= LCD_CURSORON; - command(LCD_DISPLAYCONTROL | _displaycontrol); -} - -// Turn on and off the blinking cursor -void LiquidCrystal::noBlink() { - _displaycontrol &= ~LCD_BLINKON; - command(LCD_DISPLAYCONTROL | _displaycontrol); -} -void LiquidCrystal::blink() { - _displaycontrol |= LCD_BLINKON; - command(LCD_DISPLAYCONTROL | _displaycontrol); -} - -// These commands scroll the display without changing the RAM -void LiquidCrystal::scrollDisplayLeft(void) { - command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT); -} -void LiquidCrystal::scrollDisplayRight(void) { - command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT); -} - -// This is for text that flows Left to Right -void LiquidCrystal::leftToRight(void) { - _displaymode |= LCD_ENTRYLEFT; - command(LCD_ENTRYMODESET | _displaymode); -} - -// This is for text that flows Right to Left -void LiquidCrystal::rightToLeft(void) { - _displaymode &= ~LCD_ENTRYLEFT; - command(LCD_ENTRYMODESET | _displaymode); -} - -// This will 'right justify' text from the cursor -void LiquidCrystal::autoscroll(void) { - _displaymode |= LCD_ENTRYSHIFTINCREMENT; - command(LCD_ENTRYMODESET | _displaymode); -} - -// This will 'left justify' text from the cursor -void LiquidCrystal::noAutoscroll(void) { - _displaymode &= ~LCD_ENTRYSHIFTINCREMENT; - command(LCD_ENTRYMODESET | _displaymode); -} - -// Allows us to fill the first 8 CGRAM locations -// with custom characters -void LiquidCrystal::createChar(uint8_t location, uint8_t charmap[]) { - location &= 0x7; // we only have 8 locations 0-7 - command(LCD_SETCGRAMADDR | (location << 3)); - for (int i=0; i<8; i++) { - write(charmap[i]); - } -} - -/*********** mid level commands, for sending data/cmds */ - -inline void LiquidCrystal::command(uint8_t value) { - send(value, LOW); -} - -inline void LiquidCrystal::write(uint8_t value) { - send(value, HIGH); -} - -/************ low level data pushing commands **********/ - -// write either command or data, with automatic 4/8-bit selection -void LiquidCrystal::send(uint8_t value, uint8_t mode) { - digitalWrite(_rs_pin, mode); - - // if there is a RW pin indicated, set it low to Write - if (_rw_pin != -1) { - digitalWrite(_rw_pin, LOW); - } - - if (_displayfunction & LCD_8BITMODE) { - write8bits(value); - } else { - write4bits(value>>4); - write4bits(value); - } -} - -void LiquidCrystal::pulseEnable(void) { - digitalWrite(_enable_pin, LOW); - delayMicroseconds(1); - digitalWrite(_enable_pin, HIGH); - delayMicroseconds(1); // enable pulse must be >450ns - digitalWrite(_enable_pin, LOW); - delayMicroseconds(100); // commands need > 37us to settle -} - -void LiquidCrystal::write4bits(uint8_t value) { - for (int i = 0; i < 4; i++) { - pinMode(_data_pins[i], OUTPUT); - digitalWrite(_data_pins[i], (value >> i) & 0x01); - } - - pulseEnable(); -} - -void LiquidCrystal::write8bits(uint8_t value) { - for (int i = 0; i < 8; i++) { - pinMode(_data_pins[i], OUTPUT); - digitalWrite(_data_pins[i], (value >> i) & 0x01); - } - - pulseEnable(); -} diff --git a/libraries/LiquidCrystal/LiquidCrystal.h b/libraries/LiquidCrystal/LiquidCrystal.h deleted file mode 100755 index f66ec1b..0000000 --- a/libraries/LiquidCrystal/LiquidCrystal.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef LiquidCrystal_h -#define LiquidCrystal_h - -#include <inttypes.h> -#include "Print.h" - -// commands -#define LCD_CLEARDISPLAY 0x01 -#define LCD_RETURNHOME 0x02 -#define LCD_ENTRYMODESET 0x04 -#define LCD_DISPLAYCONTROL 0x08 -#define LCD_CURSORSHIFT 0x10 -#define LCD_FUNCTIONSET 0x20 -#define LCD_SETCGRAMADDR 0x40 -#define LCD_SETDDRAMADDR 0x80 - -// flags for display entry mode -#define LCD_ENTRYRIGHT 0x00 -#define LCD_ENTRYLEFT 0x02 -#define LCD_ENTRYSHIFTINCREMENT 0x01 -#define LCD_ENTRYSHIFTDECREMENT 0x00 - -// flags for display on/off control -#define LCD_DISPLAYON 0x04 -#define LCD_DISPLAYOFF 0x00 -#define LCD_CURSORON 0x02 -#define LCD_CURSOROFF 0x00 -#define LCD_BLINKON 0x01 -#define LCD_BLINKOFF 0x00 - -// flags for display/cursor shift -#define LCD_DISPLAYMOVE 0x08 -#define LCD_CURSORMOVE 0x00 -#define LCD_MOVERIGHT 0x04 -#define LCD_MOVELEFT 0x00 - -// flags for function set -#define LCD_8BITMODE 0x10 -#define LCD_4BITMODE 0x00 -#define LCD_2LINE 0x08 -#define LCD_1LINE 0x00 -#define LCD_5x10DOTS 0x04 -#define LCD_5x8DOTS 0x00 - -class LiquidCrystal : public Print { -public: - LiquidCrystal(uint8_t rs, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, - uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); - LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, - uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); - LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3); - LiquidCrystal(uint8_t rs, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3); - - void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable, - uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, - uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); - - void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS); - - void clear(); - void home(); - - void noDisplay(); - void display(); - void noBlink(); - void blink(); - void noCursor(); - void cursor(); - void scrollDisplayLeft(); - void scrollDisplayRight(); - void leftToRight(); - void rightToLeft(); - void autoscroll(); - void noAutoscroll(); - - void createChar(uint8_t, uint8_t[]); - void setCursor(uint8_t, uint8_t); - virtual void write(uint8_t); - void command(uint8_t); -private: - void send(uint8_t, uint8_t); - void write4bits(uint8_t); - void write8bits(uint8_t); - void pulseEnable(); - - uint8_t _rs_pin; // LOW: command. HIGH: character. - uint8_t _rw_pin; // LOW: write to LCD. HIGH: read from LCD. - uint8_t _enable_pin; // activated by a HIGH pulse. - uint8_t _data_pins[8]; - - uint8_t _displayfunction; - uint8_t _displaycontrol; - uint8_t _displaymode; - - uint8_t _initialized; - - uint8_t _numlines,_currline; -}; - -#endif diff --git a/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.pde b/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.pde deleted file mode 100644 index bf33743..0000000 --- a/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.pde +++ /dev/null @@ -1,70 +0,0 @@ -/* - LiquidCrystal Library - Autoscroll - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch demonstrates the use of the autoscroll() - and noAutoscroll() functions to make new text scroll or not. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of columns and rows: - lcd.begin(16,2); -} - -void loop() { - // set the cursor to (0,0): - lcd.setCursor(0, 0); - // print from 0 to 9: - for (int thisChar = 0; thisChar < 10; thisChar++) { - lcd.print(thisChar); - delay(500); - } - - // set the cursor to (16,1): - lcd.setCursor(16,1); - // set the display to automatically scroll: - lcd.autoscroll(); - // print from 0 to 9: - for (int thisChar = 0; thisChar < 10; thisChar++) { - lcd.print(thisChar); - delay(500); - } - // turn off automatic scrolling - lcd.noAutoscroll(); - - // clear screen for the next loop: - lcd.clear(); -} - diff --git a/libraries/LiquidCrystal/examples/Blink/Blink.pde b/libraries/LiquidCrystal/examples/Blink/Blink.pde deleted file mode 100644 index 83c79b4..0000000 --- a/libraries/LiquidCrystal/examples/Blink/Blink.pde +++ /dev/null @@ -1,58 +0,0 @@ -/* - LiquidCrystal Library - Blink - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch prints "Hello World!" to the LCD and makes the - cursor block blink. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - // Print a message to the LCD. - lcd.print("hello, world!"); -} - -void loop() { - // Turn off the blinking cursor: - lcd.noBlink(); - delay(3000); - // Turn on the blinking cursor: - lcd.blink(); - delay(3000); -} - - diff --git a/libraries/LiquidCrystal/examples/Cursor/Cursor.pde b/libraries/LiquidCrystal/examples/Cursor/Cursor.pde deleted file mode 100644 index c0273f4..0000000 --- a/libraries/LiquidCrystal/examples/Cursor/Cursor.pde +++ /dev/null @@ -1,58 +0,0 @@ -/* - LiquidCrystal Library - Cursor - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch prints "Hello World!" to the LCD and - uses the cursor() and noCursor() methods to turn - on and off the cursor. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - // Print a message to the LCD. - lcd.print("hello, world!"); -} - -void loop() { - // Turn off the cursor: - lcd.noCursor(); - delay(500); - // Turn on the cursor: - lcd.cursor(); - delay(500); -} - diff --git a/libraries/LiquidCrystal/examples/Display/Display.pde b/libraries/LiquidCrystal/examples/Display/Display.pde deleted file mode 100644 index b430539..0000000 --- a/libraries/LiquidCrystal/examples/Display/Display.pde +++ /dev/null @@ -1,58 +0,0 @@ -/* - LiquidCrystal Library - display() and noDisplay() - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch prints "Hello World!" to the LCD and uses the - display() and noDisplay() functions to turn on and off - the display. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - // Print a message to the LCD. - lcd.print("hello, world!"); -} - -void loop() { - // Turn off the display: - lcd.noDisplay(); - delay(500); - // Turn on the display: - lcd.display(); - delay(500); -} - diff --git a/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde b/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde deleted file mode 100644 index 76cd746..0000000 --- a/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde +++ /dev/null @@ -1,56 +0,0 @@ -/* - LiquidCrystal Library - Hello World - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch prints "Hello World!" to the LCD - and shows the time. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - // Print a message to the LCD. - lcd.print("hello, world!"); -} - -void loop() { - // set the cursor to column 0, line 1 - // (note: line 1 is the second row, since counting begins with 0): - lcd.setCursor(0, 1); - // print the number of seconds since reset: - lcd.print(millis()/1000); -} - diff --git a/libraries/LiquidCrystal/examples/Scroll/Scroll.pde b/libraries/LiquidCrystal/examples/Scroll/Scroll.pde deleted file mode 100644 index 9276553..0000000 --- a/libraries/LiquidCrystal/examples/Scroll/Scroll.pde +++ /dev/null @@ -1,83 +0,0 @@ -/* - LiquidCrystal Library - scrollDisplayLeft() and scrollDisplayRight() - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch prints "Hello World!" to the LCD and uses the - scrollDisplayLeft() and scrollDisplayRight() methods to scroll - the text. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - //lcd.setCursor(0,7); - // Print a message to the LCD. - lcd.print("hello, world!"); - delay(1000); -} - -void loop() { - // scroll 13 positions (string length) to the left - // to move it offscreen left: - for (int positionCounter = 0; positionCounter < 13; positionCounter++) { - // scroll one position left: - lcd.scrollDisplayLeft(); - // wait a bit: - delay(150); - } - - // scroll 29 positions (string length + display length) to the right - // to move it offscreen right: - for (int positionCounter = 0; positionCounter < 29; positionCounter++) { - // scroll one position right: - lcd.scrollDisplayRight(); - // wait a bit: - delay(150); - } - - // scroll 16 positions (display length + string length) to the left - // to move it back to center: - for (int positionCounter = 0; positionCounter < 16; positionCounter++) { - // scroll one position left: - lcd.scrollDisplayLeft(); - // wait a bit: - delay(150); - } - - // delay at the end of the full loop: - delay(1000); - -} - diff --git a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde deleted file mode 100644 index a094c24..0000000 --- a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde +++ /dev/null @@ -1,62 +0,0 @@ -/* - LiquidCrystal Library - Serial Input - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch displays text sent over the serial port - (e.g. from the Serial Monitor) on an attached LCD. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe -modified 25 July 2009 - by David A. Mellis - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup(){ - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - // initialize the serial communications: - Serial.begin(9600); -} - -void loop() -{ - // when characters arrive over the serial port... - if (Serial.available()) { - // wait a bit for the entire message to arrive - delay(100); - // clear the screen - lcd.clear(); - // read all the available characters - while (Serial.available() > 0) { - // display each character to the LCD - lcd.write(Serial.read()); - } - } -} diff --git a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde deleted file mode 100644 index 725eb0d..0000000 --- a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde +++ /dev/null @@ -1,84 +0,0 @@ - /* - LiquidCrystal Library - TextDirection - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch demonstrates how to use leftToRight() and rightToLeft() - to move the cursor. - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - - */ - -// include the library code: -#include <LiquidCrystal.h> - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -int thisChar = 'a'; - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(16, 2); - // turn on the cursor: - lcd.cursor(); - Serial.begin(9600); -} - -void loop() { - // reverse directions at 'm': - if (thisChar == 'm') { - // go right for the next letter - lcd.rightToLeft(); - } - // reverse again at 's': - if (thisChar == 's') { - // go left for the next letter - lcd.leftToRight(); - } - // reset at 'z': - if (thisChar > 'z') { - // go to (0,0): - lcd.home(); - // start again at 0 - thisChar = 'a'; - } - // print the character - lcd.print(thisChar, BYTE); - // wait a second: - delay(1000); - // increment the letter: - thisChar++; -} - - - - - - - - diff --git a/libraries/LiquidCrystal/examples/setCursor/setCursor.pde b/libraries/LiquidCrystal/examples/setCursor/setCursor.pde deleted file mode 100644 index edd2e77..0000000 --- a/libraries/LiquidCrystal/examples/setCursor/setCursor.pde +++ /dev/null @@ -1,68 +0,0 @@ -/* - LiquidCrystal Library - setCursor - - Demonstrates the use a 16x2 LCD display. The LiquidCrystal - library works with all LCD displays that are compatible with the - Hitachi HD44780 driver. There are many of them out there, and you - can usually tell them by the 16-pin interface. - - This sketch prints to all the positions of the LCD using the - setCursor(0 method: - - The circuit: - * LCD RS pin to digital pin 12 - * LCD Enable pin to digital pin 11 - * LCD D4 pin to digital pin 5 - * LCD D5 pin to digital pin 4 - * LCD D6 pin to digital pin 3 - * LCD D7 pin to digital pin 2 - * 10K resistor: - * ends to +5V and ground - * wiper to LCD VO pin (pin 3) - - Library originally added 18 Apr 2008 - by David A. Mellis - library modified 5 Jul 2009 - by Limor Fried (http://www.ladyada.net) - example added 9 Jul 2009 - by Tom Igoe - modified 25 July 2009 - by David A. Mellis - - http://www.arduino.cc/en/Tutorial/LiquidCrystal - */ - -// include the library code: -#include <LiquidCrystal.h> - -// these constants won't change. But you can change the size of -// your LCD using them: -const int numRows = 2; -const int numCols = 16; - -// initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // set up the LCD's number of rows and columns: - lcd.begin(numRows, numCols); -} - -void loop() { - // loop from ASCII 'a' to ASCII 'z': - for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) { - // loop over the columns: - for (int thisCol = 0; thisCol < numRows; thisCol++) { - // loop over the rows: - for (int thisRow = 0; thisRow < numCols; thisRow++) { - // set the cursor position: - lcd.setCursor(thisRow,thisCol); - // print the letter: - lcd.print(thisLetter, BYTE); - delay(200); - } - } - } -} - - diff --git a/libraries/LiquidCrystal/keywords.txt b/libraries/LiquidCrystal/keywords.txt deleted file mode 100755 index 132845c..0000000 --- a/libraries/LiquidCrystal/keywords.txt +++ /dev/null @@ -1,37 +0,0 @@ -####################################### -# Syntax Coloring Map For LiquidCrystal -####################################### - -####################################### -# Datatypes (KEYWORD1) -####################################### - -LiquidCrystal KEYWORD1 - -####################################### -# Methods and Functions (KEYWORD2) -####################################### - -begin KEYWORD2 -clear KEYWORD2 -home KEYWORD2 -print KEYWORD2 -setCursor KEYWORD2 -cursor KEYWORD2 -noCursor KEYWORD2 -blink KEYWORD2 -noBlink KEYWORD2 -display KEYWORD2 -noDisplay KEYWORD2 -autoscroll KEYWORD2 -noAutoscroll KEYWORD2 -leftToRight KEYWORD2 -rightToLeft KEYWORD2 -scrollDisplayLeft KEYWORD2 -scrollDisplayRight KEYWORD2 -createChar KEYWORD2 - -####################################### -# Constants (LITERAL1) -####################################### - |