1 files changed, 61 insertions, 0 deletions
diff --git a/libraries/LiquidCrystal/examples/Blink/Blink.ino b/libraries/LiquidCrystal/examples/Blink/Blink.ino
new file mode 100644
index 0000000..9667b5d
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/Blink/Blink.ino
@@ -0,0 +1,61 @@
+/*
+  LiquidCrystal Library - Blink
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD and makes the 
+ cursor block blink.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * LCD R/W pin to ground
+ * 10K resistor:
+   * ends to +5V and ground
+   * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ modified 22 Nov 2010
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+
+ http://arduino.cc/en/Tutorial/LiquidCrystalBlink
+ 
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of columns and rows: 
+  lcd.begin(16, 2);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // Turn off the blinking cursor:
+  lcd.noBlink();
+  delay(3000);
+   // Turn on the blinking cursor:
+  lcd.blink();
+  delay(3000);
+}
+
+