1 files changed, 0 insertions, 168 deletions
diff --git a/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino b/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino
deleted file mode 100644
index 654d1b8..0000000
--- a/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- 
- This example enables you to change or remove the PIN number of 
- a SIM card inserted into a GSM shield.
- 
- Circuit:
- * GSM shield
- * SIM card
- 
- Created 12 Jun 2012
- by David del Peral
- 
- This example code is part of the public domain 
- 
- http://arduino.cc/en/Tutorial/GSMToolsPinManagement
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// pin manager object
-GSMPIN PINManager;
-
-// save input in serial by user
-String user_input = "";
-
-// authenticated with PIN code
-boolean auth = false;
-
-// serial monitor result messages
-String oktext = "OK";
-String errortext = "ERROR";
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  Serial.println("Change PIN example\n");
-  PINManager.begin();
-  
-  // check if the SIM have pin lock
-  while(!auth){
-    int pin_query = PINManager.isPIN();
-    if(pin_query == 1)
-    {
-      // if SIM is locked, enter PIN code
-      Serial.print("Enter PIN code: ");
-      user_input = readSerial();
-      // check PIN code
-      if(PINManager.checkPIN(user_input) == 0)
-      {
-        auth = true;
-        PINManager.setPINUsed(true);
-        Serial.println(oktext);
-      }
-      else
-      {  
-        // if PIN code was incorrected
-        Serial.println("Incorrect PIN. Remember that you have 3 opportunities.");
-      }
-    }
-    else if(pin_query == -1)
-    {
-      // PIN code is locked, user must enter PUK code
-      Serial.println("PIN locked. Enter PUK code: ");
-      String puk = readSerial();
-      Serial.print("Now, enter a new PIN code: ");
-      user_input = readSerial();
-      // check PUK code
-      if(PINManager.checkPUK(puk, user_input) == 0)
-      {
-        auth = true;
-        PINManager.setPINUsed(true);
-        Serial.println(oktext);
-      }
-      else
-      {
-        // if PUK o the new PIN are incorrect
-        Serial.println("Incorrect PUK or invalid new PIN. Try again!.");
-      }
-    }
-    else if(pin_query == -2)
-    {
-      // the worst case, PIN and PUK are locked
-      Serial.println("PIN & PUK locked. Use PIN2/PUK2 in a mobile phone.");
-      while(true);
-    }
-    else
-    {
-      // SIM does not requires authetication 
-      Serial.println("No pin necessary.");
-      auth = true;
-    }
-  }
-  
-  // start GSM shield
-  Serial.print("Checking register in GSM network...");
-  if(PINManager.checkReg() == 0)
-    Serial.println(oktext);
-  // if you are connect by roaming
-  else if(PINManager.checkReg() == 1)
-    Serial.println("ROAMING " + oktext);  
-  else
-  {
-    // error connection
-    Serial.println(errortext);
-    while(true);
-  }
-}
-
-void loop()
-{
-  // Function loop implements pin management user menu
-  // Only if you SIM use pin lock, you can change PIN code
-  // user_op variables save user option
-  
-  Serial.println("Choose an option:\n1 - On/Off PIN.");
-  if(PINManager.getPINUsed())
-    Serial.println("2 - Change PIN.");
-  String user_op = readSerial();
-  if(user_op == "1")
-  {
-    Serial.println("Enter your PIN code:");
-    user_input = readSerial();
-    // activate/deactivate PIN lock
-    PINManager.switchPIN(user_input);
-  }
-  else if(user_op == "2" & PINManager.getPINUsed())
-  {
-    Serial.println("Enter your actual PIN code:");
-    String oldPIN = readSerial();
-    Serial.println("Now, enter your new PIN code:");
-    String newPIN = readSerial();
-    // change PIN
-    PINManager.changePIN(oldPIN, newPIN);
-  }
-  else
-  {
-    Serial.println("Incorrect option. Try again!.");
-  }
-  delay(1000);
-}
-
-/*
-  Read input serial
- */
-String readSerial()
-{
-  String text = "";
-  while(1)
-  {
-    while (Serial.available() > 0)
-    {
-      char inChar = Serial.read();
-      if (inChar == '\n')
-      {
-        return text;
-      }
-      if(inChar!='\r')
-        text += inChar;
-    }
-  }
-}