1 files changed, 0 insertions, 105 deletions
diff --git a/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino b/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino
deleted file mode 100644
index 14dbc5e..0000000
--- a/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- Receive Voice Call
- 
- This sketch, for the Arduino GSM shield, receives voice calls, 
- displays the calling number, waits a few seconds then hangs up.
- 
- Circuit:
- * GSM shield 
- * Voice circuit. Refer to to the GSM shield getting started guide
-   at http://arduino.cc/en/Guide/ArduinoGSMShield#toc11
- * SIM card that can accept voice calls
- 
- With no voice circuit the call will connect, but will not send or receive sound
-  
- created Mar 2012
- by Javier Zorzano
- 
- This example is in the public domain.
- 
- http://arduino.cc/en/Tutorial/GSMExamplesReceiveVoiceCall
- 
- */
-
-// Include the GSM library
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;
-GSMVoiceCall vcs;
-
-// Array to hold the number for the incoming call
-char numtel[20];           
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("Receive Voice Call");
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  // This makes sure the modem correctly reports incoming events
-  vcs.hangCall();
-  
-  Serial.println("Waiting for a call");
-}
-
-void loop()
-{
-  // Check the status of the voice call
-  switch (vcs.getvoiceCallStatus()) 
-  {
-    case IDLE_CALL: // Nothing is happening
-      
-      break;
-      
-    case RECEIVINGCALL: // Yes! Someone is calling us
-      
-      Serial.println("RECEIVING CALL");
-      
-      // Retrieve the calling number
-      vcs.retrieveCallingNumber(numtel, 20);
-      
-      // Print the calling number
-      Serial.print("Number:");
-      Serial.println(numtel);
-      
-      // Answer the call, establish the call
-      vcs.answerCall();         
-      break;
-      
-    case TALKING:  // In this case the call would be established
-      
-      Serial.println("TALKING. Press enter to hang up.");
-      while(Serial.read()!='\n')
-        delay(100);
-      vcs.hangCall();
-      Serial.println("Hanging up and waiting for the next call.");      
-      break;
-  }
-  delay(1000);
-}
-
-