1 files changed, 109 insertions, 0 deletions
diff --git a/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino b/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino
new file mode 100644
index 0000000..e7eb275
--- /dev/null
+++ b/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino
@@ -0,0 +1,109 @@
+/*
+  Web client
+ 
+ This sketch connects to a website through a GSM shield. Specifically,
+ this example downloads the URL "http://arduino.cc/asciilogo.txt" and 
+ prints it to the Serial monitor.
+ 
+ Circuit:
+ * GSM shield attached to an Arduino
+ * SIM card with a data plan
+ 
+ created 8 Mar 2012
+ by Tom Igoe
+ 
+ http://arduino.cc/en/Tutorial/GSMExamplesWebClient
+ 
+ */
+
+// libraries
+#include <GSM.h>
+
+// PIN Number
+#define PINNUMBER ""
+
+// APN data
+#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
+#define GPRS_LOGIN     "login"    // replace with your GPRS login
+#define GPRS_PASSWORD  "password" // replace with your GPRS password
+
+// initialize the library instance
+GSMClient client;
+GPRS gprs;
+GSM gsmAccess; 
+
+// URL, path & port (for example: arduino.cc)
+char server[] = "arduino.cc";
+char path[] = "/asciilogo.txt";
+int port = 80; // port 80 is the default for HTTP
+
+void setup()
+{
+  // initialize serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  Serial.println("Starting Arduino web client.");
+  // connection state
+  boolean notConnected = true;
+
+  // After starting the modem with GSM.begin()
+  // attach the shield to the GPRS network with the APN, login and password
+  while(notConnected)
+  {
+    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
+      (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
+      notConnected = false;
+    else
+    {
+      Serial.println("Not connected");
+      delay(1000);
+    }
+  }
+
+  Serial.println("connecting...");
+
+  // if you get a connection, report back via serial:
+  if (client.connect(server, port))
+  {
+    Serial.println("connected");
+    // Make a HTTP request:
+    client.print("GET ");
+    client.print(path);
+    client.println(" HTTP/1.1");
+    client.print("Host: ");
+    client.println(server);
+    client.println("Connection: close");
+    client.println();
+  } 
+  else
+  {
+    // if you didn't get a connection to the server:
+    Serial.println("connection failed");
+  }
+}
+
+void loop()
+{
+  // if there are incoming bytes available 
+  // from the server, read them and print them:
+  if (client.available())
+  {
+    char c = client.read();
+    Serial.print(c);
+  }
+
+  // if the server's disconnected, stop the client:
+  if (!client.available() && !client.connected())
+  {
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+
+    // do nothing forevermore:
+    for(;;)
+      ;
+  }
+}