1 files changed, 0 insertions, 167 deletions
diff --git a/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino b/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
deleted file mode 100644
index 9f6ea53..0000000
--- a/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- Pachube client with Strings
- 
- This sketch connects two analog sensors to Pachube (http://www.pachube.com)
- through a Telefonica GSM/GPRS shield.
- 
- This example has been updated to use version 2.0 of the Pachube.com API. 
- To make it work, create a feed with two datastreams, and give them the IDs
- sensor1 and sensor2. Or change the code below to match your feed.
- 
- This example uses the String library, which is part of the Arduino core from
- version 0019.  
- 
- Circuit:
- * Analog sensors attached to A0 and A1
- * GSM shield attached to an Arduino
- * SIM card with a data plan
- 
- created 8 March 2012
- by Tom Igoe
- and adapted for GSM shield by David Del Peral
- 
- This code is in the public domain.
- 
- */
-
-// Include the GSM library
-#include <GSM.h>
-
-// Pachube login information
-#define APIKEY         "YOUR API KEY GOES HERE"  // replace your pachube api key here
-#define FEEDID         00000                     // replace your feed ID
-#define USERAGENT      "My Project"              // user agent is the project name
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
-#define GPRS_LOGIN     "login"    // replace with your GPRS login
-#define GPRS_PASSWORD  "password" // replace with your GPRS password
-
-// initialize the library instance
-GSMClient client;
-GPRS gprs;
-GSM gsmAccess;
-
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-// IPAddress server(216,52,233,121);     // numeric IP for api.pachube.com
-char server[] = "api.pachube.com";       // name address for Pachube API
-
-unsigned long lastConnectionTime = 0;           // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                  // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  // delay between updates to Pachube.com
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // After starting the modem with GSM.begin()
-  // attach the shield to the GPRS network with the APN, login and password 
-  while(notConnected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-
-  Serial.println("Connected to GPRS network");
-}
-
-void loop()
-{
-  // read the sensor on A0
-  int sensorReading = analogRead(A0); 
-  
-  // convert the data to a String
-  String dataString = "sensor1,";
-  dataString += sensorReading;
-
-  // you can append multiple readings to this String to 
-  // send the pachube feed multiple values
-  int otherSensorReading = analogRead(A1);
-  dataString += "\nsensor2,";
-  dataString += otherSensorReading;
-
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only
-  if (client.available())
-  {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client
-  if (!client.connected() && lastConnected)
-  {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval))
-  {
-    sendData(dataString);
-  }
-  // store the state of the connection for next time through
-  // the loop
-  lastConnected = client.connected();
-}
-
-// this method makes a HTTP connection to the server
-void sendData(String thisData)
-{
-  // if there's a successful connection:
-  if (client.connect(server, 80))
-  {
-    Serial.println("connecting...");
-    
-    // send the HTTP PUT request:
-    client.print("PUT /v2/feeds/");
-    client.print(FEEDID);
-    client.println(".csv HTTP/1.1");
-    client.println("Host: api.pachube.com");
-    client.print("X-ApiKey: ");
-    client.println(APIKEY);
-    client.print("User-Agent: ");
-    client.println(USERAGENT);
-    client.print("Content-Length: ");
-    client.println(thisData.length());
-
-    // last pieces of the HTTP PUT request
-    client.println("Content-Type: text/csv");
-    client.println("Connection: close");
-    client.println();
-    
-    // here's the actual content of the PUT request
-    client.println(thisData);
-  } 
-  else
-  {
-    // if you couldn't make a connection
-    Serial.println("connection failed");
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-  // note the time that the connection was made or attempted:
-  lastConnectionTime = millis();
-}