diff options
Diffstat (limited to 'libraries/GSM/GSM3ShieldV1PinManagement.cpp')
| -rw-r--r-- | libraries/GSM/GSM3ShieldV1PinManagement.cpp | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/libraries/GSM/GSM3ShieldV1PinManagement.cpp b/libraries/GSM/GSM3ShieldV1PinManagement.cpp deleted file mode 100644 index 0c0c749..0000000 --- a/libraries/GSM/GSM3ShieldV1PinManagement.cpp +++ /dev/null @@ -1,201 +0,0 @@ -/* -This file is part of the GSM3 communications library for Arduino --- Multi-transport communications platform --- Fully asynchronous --- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 --- Voice calls --- SMS --- TCP/IP connections --- HTTP basic clients - -This library has been developed by Telefónica Digital - PDI - -- Physical Internet Lab, as part as its collaboration with -Arduino and the Open Hardware Community. - -September-December 2012 - -This library is free software; you can redistribute it and/or -modify it under the terms of the GNU Lesser General Public -License as published by the Free Software Foundation; either -version 2.1 of the License, or (at your option) any later version. - -This library is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -Lesser General Public License for more details. - -You should have received a copy of the GNU Lesser General Public -License along with this library; if not, write to the Free Software -Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - -The latest version of this library can always be found at -https://github.com/BlueVia/Official-Arduino -*/ - -#include <GSM3ShieldV1PinManagement.h> - -// constructor -GSM3ShieldV1PinManagement::GSM3ShieldV1PinManagement() -{ -}; - -// reset the modem for direct access -void GSM3ShieldV1PinManagement::begin() -{ - // reset hardware - gsm.HWrestart(); - - pin_used = false; - - // check modem response - modemAccess.writeModemCommand("AT", 1000); - modemAccess.writeModemCommand("ATE0", 1000); -} - -/* - Check PIN status -*/ -int GSM3ShieldV1PinManagement::isPIN() -{ - String res = modemAccess.writeModemCommand("AT+CPIN?",1000); - // Check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "READY") != NULL) - return 0; - else if(strstr(res_to_compare, "SIM PIN") != NULL) - return 1; - else if(strstr(res_to_compare, "SIM PUK") != NULL) - return -1; - else - return -2; -} - -/* - Check PIN code -*/ -int GSM3ShieldV1PinManagement::checkPIN(String pin) -{ - String res = modemAccess.writeModemCommand("AT+CPIN=" + pin,1000); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "OK") == NULL) - return -1; - else - return 0; -} - -/* - Check PUK code -*/ -int GSM3ShieldV1PinManagement::checkPUK(String puk, String pin) -{ - String res = modemAccess.writeModemCommand("AT+CPIN=\"" + puk + "\",\"" + pin + "\"",1000); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "OK") == NULL) - return -1; - else - return 0; -} - -/* - Change PIN code -*/ -void GSM3ShieldV1PinManagement::changePIN(String old, String pin) -{ - String res = modemAccess.writeModemCommand("AT+CPWD=\"SC\",\"" + old + "\",\"" + pin + "\"",2000); - Serial.println(res); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "OK") != NULL) - Serial.println("Pin changed succesfully."); - else - Serial.println("ERROR"); -} - -/* - Switch PIN status -*/ -void GSM3ShieldV1PinManagement::switchPIN(String pin) -{ - String res = modemAccess.writeModemCommand("AT+CLCK=\"SC\",2",1000); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "0") != NULL) - { - res = modemAccess.writeModemCommand("AT+CLCK=\"SC\",1,\"" + pin + "\"",1000); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "OK") == NULL) - { - Serial.println("ERROR"); - pin_used = false; - } - else - { - Serial.println("OK. PIN lock on."); - pin_used = true; - } - } - else if(strstr(res_to_compare, "1") != NULL) - { - res = modemAccess.writeModemCommand("AT+CLCK=\"SC\",0,\"" + pin + "\"",1000); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "OK") == NULL) - { - Serial.println("ERROR"); - pin_used = true; - } - else - { - Serial.println("OK. PIN lock off."); - pin_used = false; - } - } - else - { - Serial.println("ERROR"); - } -} - -/* - Check registrer -*/ -int GSM3ShieldV1PinManagement::checkReg() -{ - delay(5000); - String res = modemAccess.writeModemCommand("AT+CREG?",1000); - // check response - char res_to_compare[res.length()]; - res.toCharArray(res_to_compare, res.length()); - if(strstr(res_to_compare, "1") != NULL) - return 0; - else if(strstr(res_to_compare, "5") != NULL) - return 1; - else - return -1; -} - -/* - Return if PIN lock is used -*/ -bool GSM3ShieldV1PinManagement::getPINUsed() -{ - return pin_used; -} - -/* - Set if PIN lock is used -*/ -void GSM3ShieldV1PinManagement::setPINUsed(bool used) -{ - pin_used = used; -}
\ No newline at end of file |