diff options
Diffstat (limited to 'libraries/Firmata/examples/StandardFirmata')
| -rw-r--r-- | libraries/Firmata/examples/StandardFirmata/LICENSE.txt | 458 | ||||
| -rw-r--r-- | libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino | 636 |
2 files changed, 1094 insertions, 0 deletions
diff --git a/libraries/Firmata/examples/StandardFirmata/LICENSE.txt b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino new file mode 100644 index 0000000..1a987ee --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino @@ -0,0 +1,636 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + Copyright (C) 2010-2011 Paul Stoffregen. All rights reserved. + Copyright (C) 2009 Shigeru Kobayashi. All rights reserved. + Copyright (C) 2009-2011 Jeff Hoefs. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + + formatted using the GNU C formatting and indenting +*/ + +/* + * TODO: use Program Control to load stored profiles from EEPROM + */ + +#include <Servo.h> +#include <Wire.h> +#include <Firmata.h> + +// move the following defines to Firmata.h? +#define I2C_WRITE B00000000 +#define I2C_READ B00001000 +#define I2C_READ_CONTINUOUSLY B00010000 +#define I2C_STOP_READING B00011000 +#define I2C_READ_WRITE_MODE_MASK B00011000 +#define I2C_10BIT_ADDRESS_MODE_MASK B00100000 + +#define MAX_QUERIES 8 +#define MINIMUM_SAMPLING_INTERVAL 10 + +#define REGISTER_NOT_SPECIFIED -1 + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting + +/* digital input ports */ +byte reportPINs[TOTAL_PORTS]; // 1 = report this port, 0 = silence +byte previousPINs[TOTAL_PORTS]; // previous 8 bits sent + +/* pins configuration */ +byte pinConfig[TOTAL_PINS]; // configuration of every pin +byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else +int pinState[TOTAL_PINS]; // any value that has been written + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +int samplingInterval = 19; // how often to run the main loop (in ms) + +/* i2c data */ +struct i2c_device_info { + byte addr; + byte reg; + byte bytes; +}; + +/* for i2c read continuous more */ +i2c_device_info query[MAX_QUERIES]; + +byte i2cRxData[32]; +boolean isI2CEnabled = false; +signed char queryIndex = -1; +unsigned int i2cReadDelayTime = 0; // default delay time between i2c read request and Wire.requestFrom() + +Servo servos[MAX_SERVOS]; +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void readAndReportData(byte address, int theRegister, byte numBytes) { + // allow I2C requests that don't require a register read + // for example, some devices using an interrupt pin to signify new data available + // do not always require the register read so upon interrupt you call Wire.requestFrom() + if (theRegister != REGISTER_NOT_SPECIFIED) { + Wire.beginTransmission(address); + #if ARDUINO >= 100 + Wire.write((byte)theRegister); + #else + Wire.send((byte)theRegister); + #endif + Wire.endTransmission(); + delayMicroseconds(i2cReadDelayTime); // delay is necessary for some devices such as WiiNunchuck + } else { + theRegister = 0; // fill the register with a dummy value + } + + Wire.requestFrom(address, numBytes); // all bytes are returned in requestFrom + + // check to be sure correct number of bytes were returned by slave + if(numBytes == Wire.available()) { + i2cRxData[0] = address; + i2cRxData[1] = theRegister; + for (int i = 0; i < numBytes; i++) { + #if ARDUINO >= 100 + i2cRxData[2 + i] = Wire.read(); + #else + i2cRxData[2 + i] = Wire.receive(); + #endif + } + } + else { + if(numBytes > Wire.available()) { + Firmata.sendString("I2C Read Error: Too many bytes received"); + } else { + Firmata.sendString("I2C Read Error: Too few bytes received"); + } + } + + // send slave address, register and received bytes + Firmata.sendSysex(SYSEX_I2C_REPLY, numBytes + 2, i2cRxData); +} + +void outputPort(byte portNumber, byte portValue, byte forceSend) +{ + // pins not configured as INPUT are cleared to zeros + portValue = portValue & portConfigInputs[portNumber]; + // only send if the value is different than previously sent + if(forceSend || previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + } +} + +/* ----------------------------------------------------------------------------- + * check all the active digital inputs for change of state, then add any events + * to the Serial output queue using Serial.print() */ +void checkDigitalInputs(void) +{ + /* Using non-looping code allows constants to be given to readPort(). + * The compiler will apply substantial optimizations if the inputs + * to readPort() are compile-time constants. */ + if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false); + if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false); + if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false); + if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false); + if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false); + if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false); + if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false); + if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false); + if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false); + if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false); + if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false); + if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false); + if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false); + if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false); + if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false); + if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false); +} + +// ----------------------------------------------------------------------------- +/* sets the pin mode to the correct state and sets the relevant bits in the + * two bit-arrays that track Digital I/O and PWM status + */ +void setPinModeCallback(byte pin, int mode) +{ + if (pinConfig[pin] == I2C && isI2CEnabled && mode != I2C) { + // disable i2c so pins can be used for other functions + // the following if statements should reconfigure the pins properly + disableI2CPins(); + } + if (IS_PIN_SERVO(pin) && mode != SERVO && servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].detach(); + } + if (IS_PIN_ANALOG(pin)) { + reportAnalogCallback(PIN_TO_ANALOG(pin), mode == ANALOG ? 1 : 0); // turn on/off reporting + } + if (IS_PIN_DIGITAL(pin)) { + if (mode == INPUT) { + portConfigInputs[pin/8] |= (1 << (pin & 7)); + } else { + portConfigInputs[pin/8] &= ~(1 << (pin & 7)); + } + } + pinState[pin] = 0; + switch(mode) { + case ANALOG: + if (IS_PIN_ANALOG(pin)) { + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + } + pinConfig[pin] = ANALOG; + } + break; + case INPUT: + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + pinConfig[pin] = INPUT; + } + break; + case OUTPUT: + if (IS_PIN_DIGITAL(pin)) { + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable PWM + pinMode(PIN_TO_DIGITAL(pin), OUTPUT); + pinConfig[pin] = OUTPUT; + } + break; + case PWM: + if (IS_PIN_PWM(pin)) { + pinMode(PIN_TO_PWM(pin), OUTPUT); + analogWrite(PIN_TO_PWM(pin), 0); + pinConfig[pin] = PWM; + } + break; + case SERVO: + if (IS_PIN_SERVO(pin)) { + pinConfig[pin] = SERVO; + if (!servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin)); + } + } + break; + case I2C: + if (IS_PIN_I2C(pin)) { + // mark the pin as i2c + // the user must call I2C_CONFIG to enable I2C for a device + pinConfig[pin] = I2C; + } + break; + default: + Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM + } + // TODO: save status to EEPROM here, if changed +} + +void analogWriteCallback(byte pin, int value) +{ + if (pin < TOTAL_PINS) { + switch(pinConfig[pin]) { + case SERVO: + if (IS_PIN_SERVO(pin)) + servos[PIN_TO_SERVO(pin)].write(value); + pinState[pin] = value; + break; + case PWM: + if (IS_PIN_PWM(pin)) + analogWrite(PIN_TO_PWM(pin), value); + pinState[pin] = value; + break; + } + } +} + +void digitalWriteCallback(byte port, int value) +{ + byte pin, lastPin, mask=1, pinWriteMask=0; + + if (port < TOTAL_PORTS) { + // create a mask of the pins on this port that are writable. + lastPin = port*8+8; + if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS; + for (pin=port*8; pin < lastPin; pin++) { + // do not disturb non-digital pins (eg, Rx & Tx) + if (IS_PIN_DIGITAL(pin)) { + // only write to OUTPUT and INPUT (enables pullup) + // do not touch pins in PWM, ANALOG, SERVO or other modes + if (pinConfig[pin] == OUTPUT || pinConfig[pin] == INPUT) { + pinWriteMask |= mask; + pinState[pin] = ((byte)value & mask) ? 1 : 0; + } + } + mask = mask << 1; + } + writePort(port, (byte)value, pinWriteMask); + } +} + + +// ----------------------------------------------------------------------------- +/* sets bits in a bit array (int) to toggle the reporting of the analogIns + */ +//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { +//} +void reportAnalogCallback(byte analogPin, int value) +{ + if (analogPin < TOTAL_ANALOG_PINS) { + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << analogPin); + } else { + analogInputsToReport = analogInputsToReport | (1 << analogPin); + } + } + // TODO: save status to EEPROM here, if changed +} + +void reportDigitalCallback(byte port, int value) +{ + if (port < TOTAL_PORTS) { + reportPINs[port] = (byte)value; + } + // do not disable analog reporting on these 8 pins, to allow some + // pins used for digital, others analog. Instead, allow both types + // of reporting to be enabled, but check if the pin is configured + // as analog when sampling the analog inputs. Likewise, while + // scanning digital pins, portConfigInputs will mask off values from any + // pins configured as analog +} + +/*============================================================================== + * SYSEX-BASED commands + *============================================================================*/ + +void sysexCallback(byte command, byte argc, byte *argv) +{ + byte mode; + byte slaveAddress; + byte slaveRegister; + byte data; + unsigned int delayTime; + + switch(command) { + case I2C_REQUEST: + mode = argv[1] & I2C_READ_WRITE_MODE_MASK; + if (argv[1] & I2C_10BIT_ADDRESS_MODE_MASK) { + Firmata.sendString("10-bit addressing mode is not yet supported"); + return; + } + else { + slaveAddress = argv[0]; + } + + switch(mode) { + case I2C_WRITE: + Wire.beginTransmission(slaveAddress); + for (byte i = 2; i < argc; i += 2) { + data = argv[i] + (argv[i + 1] << 7); + #if ARDUINO >= 100 + Wire.write(data); + #else + Wire.send(data); + #endif + } + Wire.endTransmission(); + delayMicroseconds(70); + break; + case I2C_READ: + if (argc == 6) { + // a slave register is specified + slaveRegister = argv[2] + (argv[3] << 7); + data = argv[4] + (argv[5] << 7); // bytes to read + readAndReportData(slaveAddress, (int)slaveRegister, data); + } + else { + // a slave register is NOT specified + data = argv[2] + (argv[3] << 7); // bytes to read + readAndReportData(slaveAddress, (int)REGISTER_NOT_SPECIFIED, data); + } + break; + case I2C_READ_CONTINUOUSLY: + if ((queryIndex + 1) >= MAX_QUERIES) { + // too many queries, just ignore + Firmata.sendString("too many queries"); + break; + } + queryIndex++; + query[queryIndex].addr = slaveAddress; + query[queryIndex].reg = argv[2] + (argv[3] << 7); + query[queryIndex].bytes = argv[4] + (argv[5] << 7); + break; + case I2C_STOP_READING: + byte queryIndexToSkip; + // if read continuous mode is enabled for only 1 i2c device, disable + // read continuous reporting for that device + if (queryIndex <= 0) { + queryIndex = -1; + } else { + // if read continuous mode is enabled for multiple devices, + // determine which device to stop reading and remove it's data from + // the array, shifiting other array data to fill the space + for (byte i = 0; i < queryIndex + 1; i++) { + if (query[i].addr = slaveAddress) { + queryIndexToSkip = i; + break; + } + } + + for (byte i = queryIndexToSkip; i<queryIndex + 1; i++) { + if (i < MAX_QUERIES) { + query[i].addr = query[i+1].addr; + query[i].reg = query[i+1].addr; + query[i].bytes = query[i+1].bytes; + } + } + queryIndex--; + } + break; + default: + break; + } + break; + case I2C_CONFIG: + delayTime = (argv[0] + (argv[1] << 7)); + + if(delayTime > 0) { + i2cReadDelayTime = delayTime; + } + + if (!isI2CEnabled) { + enableI2CPins(); + } + + break; + case SERVO_CONFIG: + if(argc > 4) { + // these vars are here for clarity, they'll optimized away by the compiler + byte pin = argv[0]; + int minPulse = argv[1] + (argv[2] << 7); + int maxPulse = argv[3] + (argv[4] << 7); + + if (IS_PIN_SERVO(pin)) { + if (servos[PIN_TO_SERVO(pin)].attached()) + servos[PIN_TO_SERVO(pin)].detach(); + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse); + setPinModeCallback(pin, SERVO); + } + } + break; + case SAMPLING_INTERVAL: + if (argc > 1) { + samplingInterval = argv[0] + (argv[1] << 7); + if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) { + samplingInterval = MINIMUM_SAMPLING_INTERVAL; + } + } else { + //Firmata.sendString("Not enough data"); + } + break; + case EXTENDED_ANALOG: + if (argc > 1) { + int val = argv[1]; + if (argc > 2) val |= (argv[2] << 7); + if (argc > 3) val |= (argv[3] << 14); + analogWriteCallback(argv[0], val); + } + break; + case CAPABILITY_QUERY: + Serial.write(START_SYSEX); + Serial.write(CAPABILITY_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + if (IS_PIN_DIGITAL(pin)) { + Serial.write((byte)INPUT); + Serial.write(1); + Serial.write((byte)OUTPUT); + Serial.write(1); + } + if (IS_PIN_ANALOG(pin)) { + Serial.write(ANALOG); + Serial.write(10); + } + if (IS_PIN_PWM(pin)) { + Serial.write(PWM); + Serial.write(8); + } + if (IS_PIN_SERVO(pin)) { + Serial.write(SERVO); + Serial.write(14); + } + if (IS_PIN_I2C(pin)) { + Serial.write(I2C); + Serial.write(1); // to do: determine appropriate value + } + Serial.write(127); + } + Serial.write(END_SYSEX); + break; + case PIN_STATE_QUERY: + if (argc > 0) { + byte pin=argv[0]; + Serial.write(START_SYSEX); + Serial.write(PIN_STATE_RESPONSE); + Serial.write(pin); + if (pin < TOTAL_PINS) { + Serial.write((byte)pinConfig[pin]); + Serial.write((byte)pinState[pin] & 0x7F); + if (pinState[pin] & 0xFF80) Serial.write((byte)(pinState[pin] >> 7) & 0x7F); + if (pinState[pin] & 0xC000) Serial.write((byte)(pinState[pin] >> 14) & 0x7F); + } + Serial.write(END_SYSEX); + } + break; + case ANALOG_MAPPING_QUERY: + Serial.write(START_SYSEX); + Serial.write(ANALOG_MAPPING_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + Serial.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127); + } + Serial.write(END_SYSEX); + break; + } +} + +void enableI2CPins() +{ + byte i; + // is there a faster way to do this? would probaby require importing + // Arduino.h to get SCL and SDA pins + for (i=0; i < TOTAL_PINS; i++) { + if(IS_PIN_I2C(i)) { + // mark pins as i2c so they are ignore in non i2c data requests + setPinModeCallback(i, I2C); + } + } + + isI2CEnabled = true; + + // is there enough time before the first I2C request to call this here? + Wire.begin(); +} + +/* disable the i2c pins so they can be used for other functions */ +void disableI2CPins() { + isI2CEnabled = false; + // disable read continuous mode for all devices + queryIndex = -1; + // uncomment the following if or when the end() method is added to Wire library + // Wire.end(); +} + +/*============================================================================== + * SETUP() + *============================================================================*/ + +void systemResetCallback() +{ + // initialize a defalt state + // TODO: option to load config from EEPROM instead of default + if (isI2CEnabled) { + disableI2CPins(); + } + for (byte i=0; i < TOTAL_PORTS; i++) { + reportPINs[i] = false; // by default, reporting off + portConfigInputs[i] = 0; // until activated + previousPINs[i] = 0; + } + // pins with analog capability default to analog input + // otherwise, pins default to digital output + for (byte i=0; i < TOTAL_PINS; i++) { + if (IS_PIN_ANALOG(i)) { + // turns off pullup, configures everything + setPinModeCallback(i, ANALOG); + } else { + // sets the output to 0, configures portConfigInputs + setPinModeCallback(i, OUTPUT); + } + } + // by default, do not report any analog inputs + analogInputsToReport = 0; + + /* send digital inputs to set the initial state on the host computer, + * since once in the loop(), this firmware will only send on change */ + /* + TODO: this can never execute, since no pins default to digital input + but it will be needed when/if we support EEPROM stored config + for (byte i=0; i < TOTAL_PORTS; i++) { + outputPort(i, readPort(i, portConfigInputs[i]), true); + } + */ +} + +void setup() +{ + Firmata.setFirmwareVersion(FIRMATA_MAJOR_VERSION, FIRMATA_MINOR_VERSION); + + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + Firmata.attach(START_SYSEX, sysexCallback); + Firmata.attach(SYSTEM_RESET, systemResetCallback); + + Firmata.begin(57600); + systemResetCallback(); // reset to default config +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ + byte pin, analogPin; + + /* DIGITALREAD - as fast as possible, check for changes and output them to the + * FTDI buffer using Serial.print() */ + checkDigitalInputs(); + + /* SERIALREAD - processing incoming messagse as soon as possible, while still + * checking digital inputs. */ + while(Firmata.available()) + Firmata.processInput(); + + /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over + * 60 bytes. use a timer to sending an event character every 4 ms to + * trigger the buffer to dump. */ + + currentMillis = millis(); + if (currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + /* ANALOGREAD - do all analogReads() at the configured sampling interval */ + for(pin=0; pin<TOTAL_PINS; pin++) { + if (IS_PIN_ANALOG(pin) && pinConfig[pin] == ANALOG) { + analogPin = PIN_TO_ANALOG(pin); + if (analogInputsToReport & (1 << analogPin)) { + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } + } + // report i2c data for all device with read continuous mode enabled + if (queryIndex > -1) { + for (byte i = 0; i < queryIndex + 1; i++) { + readAndReportData(query[i].addr, query[i].reg, query[i].bytes); + } + } + } +} |