diff options
Diffstat (limited to 'libraries/Firmata/examples/EchoString')
| -rw-r--r-- | libraries/Firmata/examples/EchoString/EchoString.ino (renamed from libraries/Firmata/examples/EchoString/EchoString.pde) | 18 | ||||
| -rw-r--r-- | libraries/Firmata/examples/EchoString/Makefile | 263 |
2 files changed, 12 insertions, 269 deletions
diff --git a/libraries/Firmata/examples/EchoString/EchoString.pde b/libraries/Firmata/examples/EchoString/EchoString.ino index e5c4e6f..5079697 100644 --- a/libraries/Firmata/examples/EchoString/EchoString.pde +++ b/libraries/Firmata/examples/EchoString/EchoString.ino @@ -1,3 +1,14 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + /* This sketch accepts strings and raw sysex messages and echos them back. * * This example code is in the public domain. @@ -14,12 +25,7 @@ void stringCallback(char *myString) void sysexCallback(byte command, byte argc, byte*argv) { - Serial.write(START_SYSEX); - Serial.write(command); - for(byte i=0; i<argc; i++) { - Serial.write(argv[i]); - } - Serial.write(END_SYSEX); + Firmata.sendSysex(command, argc, argv); } void setup() diff --git a/libraries/Firmata/examples/EchoString/Makefile b/libraries/Firmata/examples/EchoString/Makefile deleted file mode 100644 index e968c0a..0000000 --- a/libraries/Firmata/examples/EchoString/Makefile +++ /dev/null @@ -1,263 +0,0 @@ -# Arduino makefile -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment (or Java). -# -# The Arduino environment does preliminary processing on a sketch before -# compiling it. If you're using this makefile instead, you'll need to do -# a few things differently: -# -# - Give your program's file a .cpp extension (e.g. foo.cpp). -# -# - Put this line at top of your code: #include <WProgram.h> -# -# - Write prototypes for all your functions (or define them before you -# call them). A prototype declares the types of parameters a -# function will take and what type of value it will return. This -# means that you can have a call to a function before the definition -# of the function. A function prototype looks like the first line of -# the function, with a semi-colon at the end. For example: -# int digitalRead(int pin); -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. -# -# 2. Below, modify the line containing "TARGET" to refer to the name of -# of your program's file without an extension (e.g. TARGET = foo). -# -# 3. Modify the line containg "ARDUINO" to point the directory that -# contains the Arduino core (for normal Arduino installations, this -# is the hardware/cores/arduino sub-directory). -# -# 4. Modify the line containing "PORT" to refer to the filename -# representing the USB or serial connection to your Arduino board -# (e.g. PORT = /dev/tty.USB0). If the exact name of this file -# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). -# -# 5. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 6. Type "make" and press enter to compile/verify your program. -# -# 7. Type "make upload", reset your Arduino board, and press enter to -# upload your program to the Arduino board. -# -# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ - -PORT = /dev/tty.usbserial-* -TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') -ARDUINO = /Applications/arduino -ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino -ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries -INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ - -I$(ARDUINO_LIB_SRC)/EEPROM \ - -I$(ARDUINO_LIB_SRC)/Firmata \ - -I$(ARDUINO_LIB_SRC)/Servo \ - -I$(ARDUINO_LIB_SRC) -SRC = $(wildcard $(ARDUINO_SRC)/*.c) -CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ - $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ - $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ - $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ - $(ARDUINO_SRC)/WMath.cpp -HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) - -MCU = atmega168 -#MCU = atmega8 -F_CPU = 16000000 -FORMAT = ihex -UPLOAD_RATE = 19200 - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -DEBUG = stabs - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU) -CXXDEFS = -DF_CPU=$(F_CPU) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -CWARN = -Wall -Wstrict-prototypes -CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) - -CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = - - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PROGRAMMER = stk500 -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex -AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ - -b $(UPLOAD_RATE) -q -V - -# Program settings -CC = avr-gcc -CXX = avr-g++ -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) -ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - -# Default target. -all: build - -build: applet/$(TARGET).hex - -eep: applet/$(TARGET).eep -lss: applet/$(TARGET).lss -sym: applet/$(TARGET).sym - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - - -coff: applet/$(TARGET).elf - $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof - - -extcoff: applet/$(TARGET).elf - $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof - - -.SUFFIXES: .elf .hex .eep .lss .sym .pde - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Create a symbol table from ELF output file. -.elf.sym: - $(NM) -n $< > $@ - - -# Compile: create object files from C++ source files. -.cpp.o: $(HEADERS) - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: $(HEADERS) - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - - -applet/$(TARGET).cpp: $(TARGET).pde - test -d applet || mkdir applet - echo '#include "WProgram.h"' > applet/$(TARGET).cpp - echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp - sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ - grep -v 'loop()' >> applet/$(TARGET).cpp - cat $(TARGET).pde >> applet/$(TARGET).cpp - cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp - -# Link: create ELF output file from object files. -applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) - $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) - -pd_close_serial: - echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true - -# Program the device. -upload: applet/$(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) - - -pd_test: build pd_close_serial upload - -# Target: clean project. -clean: - $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ - applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ - applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - rmdir -- applet - -depend: - if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ - then \ - sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ - $(MAKEFILE).$$$$ && \ - $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ - fi - echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ - >> $(MAKEFILE); \ - $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) - -.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test - -# for emacs -etags: - make etags_`uname -s` - etags *.pde \ - $(ARDUINO_SRC)/*.[ch] \ - $(ARDUINO_SRC)/*.cpp \ - $(ARDUINO_LIB_SRC)/*/*.[ch] \ - $(ARDUINO_LIB_SRC)/*/*.cpp \ - $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ - $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] - -etags_Darwin: -# etags -a - -etags_Linux: -# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h - -etags_MINGW: -# etags -a /usr/include/*.h /usr/include/sys/*.h - - - |