diff options
Diffstat (limited to 'libraries/Firmata/Firmata.h')
| -rw-r--r-- | libraries/Firmata/Firmata.h | 72 |
1 files changed, 66 insertions, 6 deletions
diff --git a/libraries/Firmata/Firmata.h b/libraries/Firmata/Firmata.h index a926462..2732fd6 100644 --- a/libraries/Firmata/Firmata.h +++ b/libraries/Firmata/Firmata.h @@ -22,8 +22,7 @@ * software can test whether it will be compatible with the currently * installed firmware. */ #define FIRMATA_MAJOR_VERSION 2 // for non-compatible changes -#define FIRMATA_MINOR_VERSION 0 // for backwards compatible changes -#define VERSION_BLINK_PIN 13 // digital pin to blink version on +#define FIRMATA_MINOR_VERSION 1 // for backwards compatible changes #define MAX_DATA_BYTES 32 // max number of data bytes in non-Sysex messages @@ -42,12 +41,22 @@ #define END_SYSEX 0xF7 // end a MIDI Sysex message // extended command set using sysex (0-127/0x00-0x7F) -/* 0x00-0x0F reserved for custom commands */ +/* 0x00-0x0F reserved for user-defined commands */ #define SERVO_CONFIG 0x70 // set max angle, minPulse, maxPulse, freq -#define FIRMATA_STRING 0x71 // a string message with 14-bits per char +#define STRING_DATA 0x71 // a string message with 14-bits per char +#define SHIFT_DATA 0x75 // a bitstream to/from a shift register +#define I2C_REQUEST 0x76 // send an I2C read/write request +#define I2C_REPLY 0x77 // a reply to an I2C read request +#define I2C_CONFIG 0x78 // config I2C settings such as delay times and power pins #define REPORT_FIRMWARE 0x79 // report name and version of the firmware +#define SAMPLING_INTERVAL 0x7A // set the poll rate of the main loop #define SYSEX_NON_REALTIME 0x7E // MIDI Reserved for non-realtime messages #define SYSEX_REALTIME 0x7F // MIDI Reserved for realtime messages +// these are DEPRECATED to make the naming more consistent +#define FIRMATA_STRING 0x71 // same as STRING_DATA +#define SYSEX_I2C_REQUEST 0x76 // same as I2C_REQUEST +#define SYSEX_I2C_REPLY 0x77 // same as I2C_REPLY +#define SYSEX_SAMPLING_INTERVAL 0x7A // same as SAMPLING_INTERVAL // pin modes //#define INPUT 0x00 // defined in wiring.h @@ -55,7 +64,8 @@ #define ANALOG 0x02 // analog pin in analogInput mode #define PWM 0x03 // digital pin in PWM output mode #define SERVO 0x04 // digital pin in Servo output mode - +#define SHIFT 0x05 // shiftIn/shiftOut mode +#define I2C 0x06 // pin included in I2C setup extern "C" { // callback function types @@ -146,21 +156,71 @@ extern FirmataClass Firmata; #define TOTAL_DIGITAL_PINS 22 // 14 digital + 8 analog #define TOTAL_PORTS 3 // total number of ports for the board #define ANALOG_PORT 2 // port# of analog used as digital +#define FIRST_ANALOG_PIN 14 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 13 // digital pin to blink version on #elif defined(__AVR_ATmega8__) // old Arduinos #define TOTAL_ANALOG_PINS 6 #define TOTAL_DIGITAL_PINS 20 // 14 digital + 6 analog #define TOTAL_PORTS 3 // total number of ports for the board #define ANALOG_PORT 2 // port# of analog used as digital +#define FIRST_ANALOG_PIN 14 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 13 // digital pin to blink version on +#elif defined(__AVR_ATmega1280__)// Arduino Mega +#define TOTAL_ANALOG_PINS 16 +#define TOTAL_DIGITAL_PINS 70 // 54 digital + 16 analog +#define TOTAL_PORTS 9 // total number of ports for the board +#define ANALOG_PORT 8 // port# of analog used as digital +#define FIRST_ANALOG_PIN 54 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 13 // digital pin to blink version on #elif defined(__AVR_ATmega128__)// Wiring #define TOTAL_ANALOG_PINS 8 #define TOTAL_DIGITAL_PINS 51 +#define TOTAL_PORTS 7 // total number of ports for the board +#define ANALOG_PORT 5 // port# of analog used as digital +#define FIRST_ANALOG_PIN 40 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 13 // digital pin to blink version on +#elif defined(__AVR_AT90USB162__) // Teensy +#define TOTAL_ANALOG_PINS 0 +#define TOTAL_DIGITAL_PINS 21 // 21 digital + no analog +#define TOTAL_PORTS 4 // total number of ports for the board +#define ANALOG_PORT 3 // port# of analog used as digital +#define FIRST_ANALOG_PIN 21 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 6 // digital pin to blink version on +#elif defined(__AVR_ATmega32U4__) // Teensy +#define TOTAL_ANALOG_PINS 12 +#define TOTAL_DIGITAL_PINS 25 // 11 digital + 12 analog +#define TOTAL_PORTS 4 // total number of ports for the board +#define ANALOG_PORT 3 // port# of analog used as digital +#define FIRST_ANALOG_PIN 11 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 11 // digital pin to blink version on +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) // Teensy++ +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_DIGITAL_PINS 46 // 38 digital + 8 analog #define TOTAL_PORTS 6 // total number of ports for the board -#define ANALOG_PORT 2 // port# of analog used as digital +#define ANALOG_PORT 5 // port# of analog used as digital +#define FIRST_ANALOG_PIN 38 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 6 // digital pin to blink version on +#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__) // Sanguino +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_DIGITAL_PINS 32 // 24 digital + 8 analog +#define TOTAL_PORTS 4 // total number of ports for the board +#define ANALOG_PORT 3 // port# of analog used as digital +#define FIRST_ANALOG_PIN 24 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 0 // digital pin to blink version on +#elif defined(__AVR_ATmega645__) // Illuminato +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_DIGITAL_PINS 42 // 36 digital + 6 analog +#define TOTAL_PORTS 6 // total number of ports for the board +#define ANALOG_PORT 4 // port# of analog used as digital +#define FIRST_ANALOG_PIN 36 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 13 // digital pin to blink version on #else // anything else #define TOTAL_ANALOG_PINS 6 #define TOTAL_DIGITAL_PINS 14 #define TOTAL_PORTS 3 // total number of ports for the board #define ANALOG_PORT 2 // port# of analog used as digital +#define FIRST_ANALOG_PIN 14 // pin# corresponding to analog 0 +#define VERSION_BLINK_PIN 13 // digital pin to blink version on #endif |