diff options
Diffstat (limited to 'libraries/Firmata/Boards.h')
| -rw-r--r-- | libraries/Firmata/Boards.h | 366 |
1 files changed, 366 insertions, 0 deletions
diff --git a/libraries/Firmata/Boards.h b/libraries/Firmata/Boards.h new file mode 100644 index 0000000..06f69c6 --- /dev/null +++ b/libraries/Firmata/Boards.h @@ -0,0 +1,366 @@ +/* Boards.h - Hardware Abstraction Layer for Firmata library */ + +#ifndef Firmata_Boards_h +#define Firmata_Boards_h + +#include <inttypes.h> + +#if defined(ARDUINO) && ARDUINO >= 100 +#include "Arduino.h" // for digitalRead, digitalWrite, etc +#else +#include "WProgram.h" +#endif + +// Normally Servo.h must be included before Firmata.h (which then includes +// this file). If Servo.h wasn't included, this allows the code to still +// compile, but without support for any Servos. Hopefully that's what the +// user intended by not including Servo.h +#ifndef MAX_SERVOS +#define MAX_SERVOS 0 +#endif + +/* + Firmata Hardware Abstraction Layer + +Firmata is built on top of the hardware abstraction functions of Arduino, +specifically digitalWrite, digitalRead, analogWrite, analogRead, and +pinMode. While these functions offer simple integer pin numbers, Firmata +needs more information than is provided by Arduino. This file provides +all other hardware specific details. To make Firmata support a new board, +only this file should require editing. + +The key concept is every "pin" implemented by Firmata may be mapped to +any pin as implemented by Arduino. Usually a simple 1-to-1 mapping is +best, but such mapping should not be assumed. This hardware abstraction +layer allows Firmata to implement any number of pins which map onto the +Arduino implemented pins in almost any arbitrary way. + + +General Constants: + +These constants provide basic information Firmata requires. + +TOTAL_PINS: The total number of pins Firmata implemented by Firmata. + Usually this will match the number of pins the Arduino functions + implement, including any pins pins capable of analog or digital. + However, Firmata may implement any number of pins. For example, + on Arduino Mini with 8 analog inputs, 6 of these may be used + for digital functions, and 2 are analog only. On such boards, + Firmata can implement more pins than Arduino's pinMode() + function, in order to accommodate those special pins. The + Firmata protocol supports a maximum of 128 pins, so this + constant must not exceed 128. + +TOTAL_ANALOG_PINS: The total number of analog input pins implemented. + The Firmata protocol allows up to 16 analog inputs, accessed + using offsets 0 to 15. Because Firmata presents the analog + inputs using different offsets than the actual pin numbers + (a legacy of Arduino's analogRead function, and the way the + analog input capable pins are physically labeled on all + Arduino boards), the total number of analog input signals + must be specified. 16 is the maximum. + +VERSION_BLINK_PIN: When Firmata starts up, it will blink the version + number. This constant is the Arduino pin number where a + LED is connected. + + +Pin Mapping Macros: + +These macros provide the mapping between pins as implemented by +Firmata protocol and the actual pin numbers used by the Arduino +functions. Even though such mappings are often simple, pin +numbers received by Firmata protocol should always be used as +input to these macros, and the result of the macro should be +used with with any Arduino function. + +When Firmata is extended to support a new pin mode or feature, +a pair of macros should be added and used for all hardware +access. For simple 1:1 mapping, these macros add no actual +overhead, yet their consistent use allows source code which +uses them consistently to be easily adapted to all other boards +with different requirements. + +IS_PIN_XXXX(pin): The IS_PIN macros resolve to true or non-zero + if a pin as implemented by Firmata corresponds to a pin + that actually implements the named feature. + +PIN_TO_XXXX(pin): The PIN_TO macros translate pin numbers as + implemented by Firmata to the pin numbers needed as inputs + to the Arduino functions. The corresponding IS_PIN macro + should always be tested before using a PIN_TO macro, so + these macros only need to handle valid Firmata pin + numbers for the named feature. + + +Port Access Inline Funtions: + +For efficiency, Firmata protocol provides access to digital +input and output pins grouped by 8 bit ports. When these +groups of 8 correspond to actual 8 bit ports as implemented +by the hardware, these inline functions can provide high +speed direct port access. Otherwise, a default implementation +using 8 calls to digitalWrite or digitalRead is used. + +When porting Firmata to a new board, it is recommended to +use the default functions first and focus only on the constants +and macros above. When those are working, if optimized port +access is desired, these inline functions may be extended. +The recommended approach defines a symbol indicating which +optimization to use, and then conditional complication is +used within these functions. + +readPort(port, bitmask): Read an 8 bit port, returning the value. + port: The port number, Firmata pins port*8 to port*8+7 + bitmask: The actual pins to read, indicated by 1 bits. + +writePort(port, value, bitmask): Write an 8 bit port. + port: The port number, Firmata pins port*8 to port*8+7 + value: The 8 bit value to write + bitmask: The actual pins to write, indicated by 1 bits. +*/ + +/*============================================================================== + * Board Specific Configuration + *============================================================================*/ + +#ifndef digitalPinHasPWM +#define digitalPinHasPWM(p) IS_PIN_DIGITAL(p) +#endif + +// Arduino Duemilanove, Diecimila, and NG +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +#if defined(NUM_ANALOG_INPUTS) && NUM_ANALOG_INPUTS == 6 +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 20 // 14 digital + 6 analog +#else +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 22 // 14 digital + 8 analog +#endif +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) <= 19) +#define IS_PIN_ANALOG(p) ((p) >= 14 && (p) < 14 + TOTAL_ANALOG_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) (IS_PIN_DIGITAL(p) && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 18 || (p) == 19) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 14) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) +#define ARDUINO_PINOUT_OPTIMIZE 1 + + +// Wiring (and board) +#elif defined(WIRING) +#define VERSION_BLINK_PIN WLED +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= FIRST_ANALOG_PIN && (p) < (FIRST_ANALOG_PIN+TOTAL_ANALOG_PINS)) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == SDA || (p) == SCL) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - FIRST_ANALOG_PIN) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// old Arduinos +#elif defined(__AVR_ATmega8__) +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 20 // 14 digital + 6 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) <= 19) +#define IS_PIN_ANALOG(p) ((p) >= 14 && (p) <= 19) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) (IS_PIN_DIGITAL(p) && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 18 || (p) == 19) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 14) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) +#define ARDUINO_PINOUT_OPTIMIZE 1 + + +// Arduino Mega +#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define TOTAL_ANALOG_PINS 16 +#define TOTAL_PINS 70 // 54 digital + 16 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 54 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 2 && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 20 || (p) == 21) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 54) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// Teensy 1.0 +#elif defined(__AVR_AT90USB162__) +#define TOTAL_ANALOG_PINS 0 +#define TOTAL_PINS 21 // 21 digital + no analog +#define VERSION_BLINK_PIN 6 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) (0) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) (0) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Teensy 2.0 +#elif defined(__AVR_ATmega32U4__) +#define TOTAL_ANALOG_PINS 12 +#define TOTAL_PINS 25 // 11 digital + 12 analog +#define VERSION_BLINK_PIN 11 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 11 && (p) <= 22) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 5 || (p) == 6) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) (((p)<22)?21-(p):11) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Teensy++ 1.0 and 2.0 +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 46 // 38 digital + 8 analog +#define VERSION_BLINK_PIN 6 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 38 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 0 || (p) == 1) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 38) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Sanguino +#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 32 // 24 digital + 8 analog +#define VERSION_BLINK_PIN 0 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 24 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 16 || (p) == 17) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 24) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// Illuminato +#elif defined(__AVR_ATmega645__) +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 42 // 36 digital + 6 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 36 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 4 || (p) == 5) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 36) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// anything else +#else +#error "Please edit Boards.h with a hardware abstraction for this board" +#endif + + +/*============================================================================== + * readPort() - Read an 8 bit port + *============================================================================*/ + +static inline unsigned char readPort(byte, byte) __attribute__((always_inline, unused)); +static inline unsigned char readPort(byte port, byte bitmask) +{ +#if defined(ARDUINO_PINOUT_OPTIMIZE) + if (port == 0) return (PIND & 0xFC) & bitmask; // ignore Rx/Tx 0/1 + if (port == 1) return ((PINB & 0x3F) | ((PINC & 0x03) << 6)) & bitmask; + if (port == 2) return ((PINC & 0x3C) >> 2) & bitmask; + return 0; +#else + unsigned char out=0, pin=port*8; + if (IS_PIN_DIGITAL(pin+0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin+0))) out |= 0x01; + if (IS_PIN_DIGITAL(pin+1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin+1))) out |= 0x02; + if (IS_PIN_DIGITAL(pin+2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin+2))) out |= 0x04; + if (IS_PIN_DIGITAL(pin+3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin+3))) out |= 0x08; + if (IS_PIN_DIGITAL(pin+4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin+4))) out |= 0x10; + if (IS_PIN_DIGITAL(pin+5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin+5))) out |= 0x20; + if (IS_PIN_DIGITAL(pin+6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin+6))) out |= 0x40; + if (IS_PIN_DIGITAL(pin+7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin+7))) out |= 0x80; + return out; +#endif +} + +/*============================================================================== + * writePort() - Write an 8 bit port, only touch pins specified by a bitmask + *============================================================================*/ + +static inline unsigned char writePort(byte, byte, byte) __attribute__((always_inline, unused)); +static inline unsigned char writePort(byte port, byte value, byte bitmask) +{ +#if defined(ARDUINO_PINOUT_OPTIMIZE) + if (port == 0) { + bitmask = bitmask & 0xFC; // do not touch Tx & Rx pins + byte valD = value & bitmask; + byte maskD = ~bitmask; + cli(); + PORTD = (PORTD & maskD) | valD; + sei(); + } else if (port == 1) { + byte valB = (value & bitmask) & 0x3F; + byte valC = (value & bitmask) >> 6; + byte maskB = ~(bitmask & 0x3F); + byte maskC = ~((bitmask & 0xC0) >> 6); + cli(); + PORTB = (PORTB & maskB) | valB; + PORTC = (PORTC & maskC) | valC; + sei(); + } else if (port == 2) { + bitmask = bitmask & 0x0F; + byte valC = (value & bitmask) << 2; + byte maskC = ~(bitmask << 2); + cli(); + PORTC = (PORTC & maskC) | valC; + sei(); + } +#else + byte pin=port*8; + if ((bitmask & 0x01)) digitalWrite(PIN_TO_DIGITAL(pin+0), (value & 0x01)); + if ((bitmask & 0x02)) digitalWrite(PIN_TO_DIGITAL(pin+1), (value & 0x02)); + if ((bitmask & 0x04)) digitalWrite(PIN_TO_DIGITAL(pin+2), (value & 0x04)); + if ((bitmask & 0x08)) digitalWrite(PIN_TO_DIGITAL(pin+3), (value & 0x08)); + if ((bitmask & 0x10)) digitalWrite(PIN_TO_DIGITAL(pin+4), (value & 0x10)); + if ((bitmask & 0x20)) digitalWrite(PIN_TO_DIGITAL(pin+5), (value & 0x20)); + if ((bitmask & 0x40)) digitalWrite(PIN_TO_DIGITAL(pin+6), (value & 0x40)); + if ((bitmask & 0x80)) digitalWrite(PIN_TO_DIGITAL(pin+7), (value & 0x80)); +#endif +} + + + + +#ifndef TOTAL_PORTS +#define TOTAL_PORTS ((TOTAL_PINS + 7) / 8) +#endif + + +#endif /* Firmata_Boards_h */ + |