diff options
Diffstat (limited to 'libraries/Ethernet/examples')
14 files changed, 640 insertions, 95 deletions
diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.ino b/libraries/Ethernet/examples/ChatServer/ChatServer.ino index 9f819fd..d50e5a6 100644 --- a/libraries/Ethernet/examples/ChatServer/ChatServer.ino +++ b/libraries/Ethernet/examples/ChatServer/ChatServer.ino @@ -12,7 +12,7 @@ created 18 Dec 2009 by David A. Mellis - modified 10 August 2010 + modified 9 Apr 2012 by Tom Igoe */ @@ -23,41 +23,57 @@ // Enter a MAC address and IP address for your controller below. // The IP address will be dependent on your local network. // gateway and subnet are optional: -byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; IPAddress ip(192,168,1, 177); IPAddress gateway(192,168,1, 1); IPAddress subnet(255, 255, 0, 0); + // telnet defaults to port 23 EthernetServer server(23); -boolean gotAMessage = false; // whether or not you got a message from the client yet +boolean alreadyConnected = false; // whether or not the client was connected previously void setup() { // initialize the ethernet device Ethernet.begin(mac, ip, gateway, subnet); // start listening for clients server.begin(); - // open the serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + Serial.print("Chat server address:"); + Serial.println(Ethernet.localIP()); } void loop() { // wait for a new client: EthernetClient client = server.available(); - + // when the client sends the first byte, say hello: if (client) { - if (!gotAMessage) { + if (!alreadyConnected) { + // clead out the input buffer: + client.flush(); Serial.println("We have a new client"); client.println("Hello, client!"); - gotAMessage = true; + alreadyConnected = true; + } + + if (client.available() > 0) { + // read the bytes incoming from the client: + char thisChar = client.read(); + // echo the bytes back to the client: + server.write(thisChar); + // echo the bytes to the server as well: + Serial.write(thisChar); } - - // read the bytes incoming from the client: - char thisChar = client.read(); - // echo the bytes back to the client: - server.write(thisChar); - // echo the bytes to the server as well: - Serial.print(thisChar); } } + + + diff --git a/libraries/Ethernet/examples/CosmClient/CosmClient.ino b/libraries/Ethernet/examples/CosmClient/CosmClient.ino new file mode 100644 index 0000000..22815af --- /dev/null +++ b/libraries/Ethernet/examples/CosmClient/CosmClient.ino @@ -0,0 +1,159 @@ +/* + Cosm sensor client + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the cosm.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + updated 14 May 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + +http://arduino.cc/en/Tutorial/CosmClient + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + +#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +char server[] = "api.cosm.com"; // name address for cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to cosm.com + +void setup() { + // start serial port: + Serial.begin(9600); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(sensorReading); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(int thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +// This method calculates the number of digits in the +// sensor reading. Since each digit of the ASCII decimal +// representation is a byte, the number of digits equals +// the number of bytes: + +int getLength(int someValue) { + // there's at least one byte: + int digits = 1; + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) { + dividend = dividend /10; + digits++; + } + // return the number of digits: + return digits; +} + diff --git a/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino b/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino new file mode 100644 index 0000000..05b549b --- /dev/null +++ b/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino @@ -0,0 +1,146 @@ +/* + Cosm sensor client with Strings + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the Cosm.com API. + To make it work, create a feed with two datastreams, and give them the IDs + sensor1 and sensor2. Or change the code below to match your feed. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + updated 14 May 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + + http://arduino.cc/en/Tutorial/CosmClientString + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + + +#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// fill in your address here: + byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +char server[] = "api.cosm.com"; // name address for Cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Cosm.com + +void setup() { + // start serial port: + Serial.begin(9600); + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + // convert the data to a String to send it: + + String dataString = "sensor1,"; + dataString += sensorReading; + + // you can append multiple readings to this String if your + // Cosm feed is set up to handle multiple values: + int otherSensorReading = analogRead(A1); + dataString += "\nsensor2,"; + dataString += otherSensorReading; + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(dataString); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(String thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + client.println(thisData.length()); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.println(thisData); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + diff --git a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino index 630dd17..5eaaf24 100644 --- a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino +++ b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino @@ -9,6 +9,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 12 April 2011 + modified 9 Apr 2012 by Tom Igoe */ @@ -27,8 +28,13 @@ byte mac[] = { EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino index 5082054..09cbd43 100644 --- a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino +++ b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino @@ -12,6 +12,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 21 May 2011 + modified 9 Apr 2012 by Tom Igoe Based on ChatServer example by David A. Mellis @@ -34,8 +35,14 @@ EthernetServer server(23); boolean gotAMessage = false; // whether or not you got a message from the client yet void setup() { - // open the serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: Serial.println("Trying to get an IP address using DHCP"); if (Ethernet.begin(mac) == 0) { diff --git a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino index 5c7a53a..c14abf4 100644 --- a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino +++ b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino @@ -9,7 +9,7 @@ created 18 Dec 2009 by David A. Mellis - modified 12 April 2011 + modified 9 Apr 2012 by Tom Igoe, based on work by Adrian McEwen */ @@ -28,8 +28,13 @@ char serverName[] = "www.google.com"; EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino index a169443..dfd2d40 100644 --- a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino +++ b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino @@ -6,15 +6,20 @@ the Adafruit Ethernet shield, either one will work, as long as it's got a Wiznet Ethernet module on board. + This example has been updated to use version 2.0 of the Pachube.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + Circuit: * Analog sensor attached to analog in 0 * Ethernet shield attached to pins 10, 11, 12, 13 created 15 March 2010 - updated 26 Oct 2011 - by Tom Igoe + modified 9 Apr 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra - http://www.tigoe.net/pcomp/code/category/arduinowiring/873 +http://arduino.cc/en/Tutorial/PachubeClient This code is in the public domain. */ @@ -22,6 +27,10 @@ #include <SPI.h> #include <Ethernet.h> +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + // assign a MAC address for the ethernet controller. // Newer Ethernet shields have a MAC address printed on a sticker on the shield // fill in your address here: @@ -34,26 +43,27 @@ IPAddress ip(10,0,1,20); // initialize the library instance: EthernetClient client; -long lastConnectionTime = 0; // last time you connected to the server, in milliseconds -boolean lastConnected = false; // state of the connection last time through the main loop -const int postingInterval = 10000; //delay between updates to Pachube.com +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(216,52,233,122); // numeric IP for api.pachube.com +//char server[] = "api.pachube.com"; // name address for pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com void setup() { - // start serial port: + // Open serial communications and wait for port to open: Serial.begin(9600); - // start the Ethernet connection: - if (Ethernet.begin(mac) == 0) { - Serial.println("Failed to configure Ethernet using DHCP"); - // no point in carrying on, so do nothing forevermore: - for(;;) - ; + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only } - // give the ethernet module time to boot up: - delay(1000); - // start the Ethernet connection: + + + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); - // Configure manually: + // DHCP failed, so use a fixed IP address: Ethernet.begin(mac, ip); } } @@ -91,34 +101,43 @@ void loop() { // this method makes a HTTP connection to the server: void sendData(int thisData) { // if there's a successful connection: - if (client.connect("www.pachube.com", 80)) { + if (client.connect(server, 80)) { Serial.println("connecting..."); - // send the HTTP PUT request. - // fill in your feed address here: - client.print("PUT /api/YOUR_FEED_HERE.csv HTTP/1.1\n"); - client.print("Host: www.pachube.com\n"); - // fill in your Pachube API key here: - client.print("X-PachubeApiKey: YOUR_KEY_HERE\n"); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.pachube.com"); + client.print("X-PachubeApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); client.print("Content-Length: "); // calculate the length of the sensor reading in bytes: - int thisLength = getLength(thisData); - client.println(thisLength, DEC); + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); // last pieces of the HTTP PUT request: - client.print("Content-Type: text/csv\n"); - client.println("Connection: close\n"); + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); // here's the actual content of the PUT request: - client.println(thisData, DEC); - - // note the time that the connection was made: - lastConnectionTime = millis(); + client.print("sensor1,"); + client.println(thisData); + } else { // if you couldn't make a connection: Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); } diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino index 4a03100..2a96e9f 100644 --- a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino +++ b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino @@ -1,11 +1,15 @@ /* - Pachube sensor client with Strings + Cosm sensor client with Strings - This sketch connects an analog sensor to Pachube (http://www.pachube.com) + This sketch connects an analog sensor to Cosm (http://www.cosm.com) using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or the Adafruit Ethernet shield, either one will work, as long as it's got a Wiznet Ethernet module on board. + This example has been updated to use version 2.0 of the Cosm.com API. + To make it work, create a feed with two datastreams, and give them the IDs + sensor1 and sensor2. Or change the code below to match your feed. + This example uses the String library, which is part of the Arduino core from version 0019. @@ -14,9 +18,10 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 15 March 2010 - updated 26 Oct 2011 - by Tom Igoe + modified 9 Apr 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + http://arduino.cc/en/Tutorial/CosmClientString This code is in the public domain. */ @@ -24,10 +29,17 @@ #include <SPI.h> #include <Ethernet.h> + +/#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + + // assign a MAC address for the ethernet controller. // fill in your address here: -byte mac[] = { + byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + // fill in an available IP address on your network here, // for manual configuration: IPAddress ip(10,0,1,20); @@ -35,19 +47,29 @@ IPAddress ip(10,0,1,20); // initialize the library instance: EthernetClient client; -long lastConnectionTime = 0; // last time you connected to the server, in milliseconds -boolean lastConnected = false; // state of the connection last time through the main loop -const int postingInterval = 10000; //delay between updates to Pachube.com +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +//char server[] = "api.cosm.com"; // name address for Cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Cosm.com void setup() { - // start serial port: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // give the ethernet module time to boot up: delay(1000); // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); - // Configure manually: + // DHCP failed, so use a fixed IP address: Ethernet.begin(mac, ip); } } @@ -56,13 +78,15 @@ void loop() { // read the analog sensor: int sensorReading = analogRead(A0); // convert the data to a String to send it: - String dataString = String(sensorReading); + + String dataString = "sensor1,"; + dataString += sensorReading; // you can append multiple readings to this String if your - // pachube feed is set up to handle multiple values: + // Cosm feed is set up to handle multiple values: int otherSensorReading = analogRead(A1); - dataString += ","; - dataString += String(otherSensorReading); + dataString += "\nsensor2,"; + dataString += otherSensorReading; // if there's incoming data from the net connection. // send it out the serial port. This is for debugging @@ -81,7 +105,7 @@ void loop() { } // if you're not connected, and ten seconds have passed since - // your last connection, then connect again and send data: + // your last connection, then connect again and send data: if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { sendData(dataString); } @@ -93,29 +117,36 @@ void loop() { // this method makes a HTTP connection to the server: void sendData(String thisData) { // if there's a successful connection: - if (client.connect("www.pachube.com", 80)) { + if (client.connect(server, 80)) { Serial.println("connecting..."); - // send the HTTP PUT request. - // fill in your feed address here: - client.print("PUT /api/YOUR_FEED_HERE.csv HTTP/1.1\n"); - client.print("Host: www.pachube.com\n"); - // fill in your Pachube API key here: - client.print("X-PachubeApiKey: YOUR_KEY_HERE\n"); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-CosmApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); client.print("Content-Length: "); - client.println(thisData.length(), DEC); + client.println(thisData.length()); // last pieces of the HTTP PUT request: - client.print("Content-Type: text/csv\n"); - client.println("Connection: close\n"); + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); // here's the actual content of the PUT request: client.println(thisData); - - // note the time that the connection was made: - lastConnectionTime = millis(); } else { // if you couldn't make a connection: Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); } + diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino index 5cf1ad8..3457125 100644 --- a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino +++ b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino @@ -13,6 +13,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 14 Sep 2010 + modified 9 Apr 2012 by Tom Igoe */ @@ -38,8 +39,13 @@ EthernetClient client; void setup() { // start the Ethernet connection: Ethernet.begin(mac, ip); - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // give the Ethernet shield a second to initialize: delay(1000); Serial.println("connecting..."); diff --git a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino index f113e17..3587d72 100644 --- a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino +++ b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino @@ -14,9 +14,10 @@ version 0019. Circuit: - * Ethernet shield attached to pins 10, 11, 12, 13 + * Ethernet shield attached to pins 10, 11, 12, 13 created 21 May 2011 + modified 9 Apr 2012 by Tom Igoe This code is in the public domain. @@ -35,12 +36,12 @@ IPAddress ip(192,168,1,20); // initialize the library instance: EthernetClient client; -const int requestInterval = 60000; // delay between requests +const unsigned long requestInterval = 60000; // delay between requests char serverName[] = "api.twitter.com"; // twitter URL boolean requested; // whether you've made a request since connecting -long lastAttemptTime = 0; // last time you connected to the server, in milliseconds +unsigned long lastAttemptTime = 0; // last time you connected to the server, in milliseconds String currentLine = ""; // string to hold the text from server String tweet = ""; // string to hold the tweet @@ -51,13 +52,22 @@ void setup() { currentLine.reserve(256); tweet.reserve(150); -// initialize serial: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // attempt a DHCP connection: + Serial.println("Attempting to get an IP address using DHCP:"); if (!Ethernet.begin(mac)) { // if DHCP fails, start with a hard-coded address: + Serial.println("failed to get an IP address using DHCP, trying manually"); Ethernet.begin(mac, ip); } + Serial.print("My address:"); + Serial.println(Ethernet.localIP()); // connect to Twitter: connectToServer(); } @@ -114,7 +124,7 @@ void connectToServer() { Serial.println("connecting to server..."); if (client.connect(serverName, 80)) { Serial.println("making HTTP request..."); - // make HTTP GET request to twitter: + // make HTTP GET request to twitter: client.println("GET /1/statuses/user_timeline.xml?screen_name=arduino&count=1 HTTP/1.1"); client.println("HOST: api.twitter.com"); client.println(); @@ -122,3 +132,4 @@ void connectToServer() { // note the time of this connect attempt: lastAttemptTime = millis(); } + diff --git a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino index b4e24b8..93ffe39 100644 --- a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino +++ b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino @@ -9,7 +9,7 @@ created 4 Sep 2010 by Michael Margolis - modified 17 Sep 2010 + modified 9 Apr 2012 by Tom Igoe This code is in the public domain. @@ -38,7 +38,12 @@ EthernetUDP Udp; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start Ethernet and UDP if (Ethernet.begin(mac) == 0) { diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino index 1806854..5d5d7f2 100644 --- a/libraries/Ethernet/examples/WebClient/WebClient.ino +++ b/libraries/Ethernet/examples/WebClient/WebClient.ino @@ -8,6 +8,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 18 Dec 2009 + modified 9 Apr 2012 by David A. Mellis */ @@ -26,8 +27,12 @@ IPAddress server(173,194,33,104); // Google EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino new file mode 100644 index 0000000..e0f06c4 --- /dev/null +++ b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino @@ -0,0 +1,110 @@ +/* + Repeating Web client + + This sketch connects to a a web server and makes a request + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example uses DNS, by assigning the Ethernet client with a MAC address, + IP address, and DNS address. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 19 Apr 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/WebClientRepeating + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// assign a MAC address for the ethernet controller. +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,0,20); + +// fill in your Domain Name Server address here: +IPAddress myDns(1,1,1,1); + +// initialize the library instance: +EthernetClient client; + +char server[] = "www.arduino.cc"; + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 60*1000; // delay between updates, in milliseconds + +void setup() { + // start serial port: + Serial.begin(9600); + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection using a fixed IP address and DNS server: + Ethernet.begin(mac, ip, myDns); + // print the Ethernet board/shield's IP address: + Serial.print("My IP address: "); + Serial.println(Ethernet.localIP()); +} + +void loop() { + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + httpRequest(); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void httpRequest() { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.println("GET /latest.txt HTTP/1.1"); + client.println("Host: www.arduino.cc"); + client.println("User-Agent: arduino-ethernet"); + client.println("Connection: close"); + client.println(); + + // note the time that the connection was made: + lastConnectionTime = millis(); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println("disconnecting."); + client.stop(); + } +} + + + + diff --git a/libraries/Ethernet/examples/WebServer/WebServer.ino b/libraries/Ethernet/examples/WebServer/WebServer.ino index 6837f83..ce8dbb1 100644 --- a/libraries/Ethernet/examples/WebServer/WebServer.ino +++ b/libraries/Ethernet/examples/WebServer/WebServer.ino @@ -10,7 +10,7 @@ created 18 Dec 2009 by David A. Mellis - modified 4 Sep 2010 + modified 9 Apr 2012 by Tom Igoe */ @@ -20,7 +20,8 @@ // Enter a MAC address and IP address for your controller below. // The IP address will be dependent on your local network: -byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; IPAddress ip(192,168,1, 177); // Initialize the Ethernet server library @@ -28,23 +29,33 @@ IPAddress ip(192,168,1, 177); // (port 80 is default for HTTP): EthernetServer server(80); -void setup() -{ +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection and the server: Ethernet.begin(mac, ip); server.begin(); + Serial.print("server is at "); + Serial.println(Ethernet.localIP()); } -void loop() -{ + +void loop() { // listen for incoming clients EthernetClient client = server.available(); if (client) { + Serial.println("new client"); // an http request ends with a blank line boolean currentLineIsBlank = true; while (client.connected()) { if (client.available()) { char c = client.read(); + Serial.write(c); // if you've gotten to the end of the line (received a newline // character) and the line is blank, the http request has ended, // so you can send a reply @@ -52,16 +63,22 @@ void loop() // send a standard http response header client.println("HTTP/1.1 200 OK"); client.println("Content-Type: text/html"); + client.println("Connnection: close"); client.println(); - + client.println("<!DOCTYPE HTML>"); + client.println("<html>"); + // add a meta refresh tag, so the browser pulls again every 5 seconds: + client.println("<meta http-equiv=\"refresh\" content=\"5\">"); // output the value of each analog input pin for (int analogChannel = 0; analogChannel < 6; analogChannel++) { + int sensorReading = analogRead(analogChannel); client.print("analog input "); client.print(analogChannel); client.print(" is "); - client.print(analogRead(analogChannel)); - client.println("<br />"); + client.print(sensorReading); + client.println("<br />"); } + client.println("</html>"); break; } if (c == '\n') { @@ -78,5 +95,7 @@ void loop() delay(1); // close the connection: client.stop(); + Serial.println("client disonnected"); } } + |