1 files changed, 0 insertions, 118 deletions
diff --git a/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino b/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino
deleted file mode 100644
index 4d4045c..0000000
--- a/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
-  UDPSendReceive.pde:
- This sketch receives UDP message strings, prints them to the serial port
- and sends an "acknowledge" string back to the sender
- 
- A Processing sketch is included at the end of file that can be used to send 
- and received messages for testing with a computer.
- 
- created 21 Aug 2010
- by Michael Margolis
- 
- This code is in the public domain.
- */
-
-
-#include <SPI.h>         // needed for Arduino versions later than 0018
-#include <Ethernet.h>
-#include <EthernetUdp.h>         // UDP library from: bjoern@cs.stanford.edu 12/30/2008
-
-
-// Enter a MAC address and IP address for your controller below.
-// The IP address will be dependent on your local network:
-byte mac[] = {  
-  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-IPAddress ip(192, 168, 1, 177);
-
-unsigned int localPort = 8888;      // local port to listen on
-
-// buffers for receiving and sending data
-char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; //buffer to hold incoming packet,
-char  ReplyBuffer[] = "acknowledged";       // a string to send back
-
-// An EthernetUDP instance to let us send and receive packets over UDP
-EthernetUDP Udp;
-
-void setup() {
-  // start the Ethernet and UDP:
-  Ethernet.begin(mac,ip);
-  Udp.begin(localPort);
-
-  Serial.begin(9600);
-}
-
-void loop() {
-  // if there's data available, read a packet
-  int packetSize = Udp.parsePacket();
-  if(packetSize)
-  {
-    Serial.print("Received packet of size ");
-    Serial.println(packetSize);
-    Serial.print("From ");
-    IPAddress remote = Udp.remoteIP();
-    for (int i =0; i < 4; i++)
-    {
-      Serial.print(remote[i], DEC);
-      if (i < 3)
-      {
-        Serial.print(".");
-      }
-    }
-    Serial.print(", port ");
-    Serial.println(Udp.remotePort());
-
-    // read the packet into packetBufffer
-    Udp.read(packetBuffer,UDP_TX_PACKET_MAX_SIZE);
-    Serial.println("Contents:");
-    Serial.println(packetBuffer);
-
-    // send a reply, to the IP address and port that sent us the packet we received
-    Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
-    Udp.write(ReplyBuffer);
-    Udp.endPacket();
-  }
-  delay(10);
-}
-
-
-/*
-  Processing sketch to run with this example
- =====================================================
- 
- // Processing UDP example to send and receive string data from Arduino 
- // press any key to send the "Hello Arduino" message
- 
- 
- import hypermedia.net.*;
- 
- UDP udp;  // define the UDP object
- 
- 
- void setup() {
- udp = new UDP( this, 6000 );  // create a new datagram connection on port 6000
- //udp.log( true ); 		// <-- printout the connection activity
- udp.listen( true );           // and wait for incoming message  
- }
- 
- void draw()
- {
- }
- 
- void keyPressed() {
- String ip       = "192.168.1.177";	// the remote IP address
- int port        = 8888;		// the destination port
- 
- udp.send("Hello World", ip, port );   // the message to send
- 
- }
- 
- void receive( byte[] data ) { 			// <-- default handler
- //void receive( byte[] data, String ip, int port ) {	// <-- extended handler
- 
- for(int i=0; i < data.length; i++) 
- print(char(data[i]));  
- println();   
- }
- */
-
-